Abstract: Curing of paints by exposure to UV radiations is
emerging as one of the best film forming technique as an alternative
to traditional solvent borne oxidative and thermal curing coatings.
The composition and chemistry of UV curable coatings and role of
multifunctional and monofunctional monomers, oligomers, and
photoinitiators have been discussed. The limitations imposed by
thermodynamic equilibrium and tendency for acrylic double bond
polymerizations during synthesis of multifunctional acrylates have
been presented. Aim of present investigation was thus to explore the
reaction variables associated with synthesis of multifunctional
acrylates. Zirconium oxychloride was evaluated as catalyst against
regular acid functional catalyst. The catalyzed synthesis of glyceryl
acrylate and neopentyl glycol acrylate was conducted by variation of
following reaction parameters: two different reactant molar ratios-
1:4 and 1:6; catalyst usage in % by moles on polyol- 2.5, 5.0 and 7.5
and two different reaction temperatures- 45 and 75 0C. The reaction
was monitored by determination of acid value and hydroxy value at
regular intervals, besides TLC, HPLC, and FTIR analysis of
intermediates and products. On the basis of determination of reaction
progress over 1-60 hrs, the esterification reaction was observed to
follow 2nd order kinetics with rate constant varying from 1*10-4 to
7*10-4. The thermal and catalytic components of second order rate
constant and energy of activation were also determined. Uses of
these kinetic and thermodynamic parameters in design of reactor for
manufacture of multifunctional acrylate ester have been presented.
The synthesized multifunctional acrylates were used to formulate and
apply UV curable clear coat followed by determination of curing
characteristics and mechanical properties of cured film. The overall
curing rates less than 05 min. were easily attained indicating
economical viability of radiation curable system due to faster
production schedules
Abstract: Software reuse can be considered as the most realistic
and promising way to improve software engineering productivity and
quality. Automated assistance for software reuse involves the
representation, classification, retrieval and adaptation of components.
The representation and retrieval of components are important to
software reuse in Component-Based on Software Development
(CBSD). However, current industrial component models mainly focus
on the implement techniques and ignore the semantic information
about component, so it is difficult to retrieve the components that
satisfy user-s requirements. This paper presents a method of business
component retrieval based on specification matching to solve the
software reuse of enterprise information system. First, a business
component model oriented reuse is proposed. In our model, the
business data type is represented as sign data type based on XML,
which can express the variable business data type that can describe the
variety of business operations. Based on this model, we propose
specification match relationships in two levels: business operation
level and business component level. In business operation level, we
use input business data types, output business data types and the
taxonomy of business operations evaluate the similarity between
business operations. In the business component level, we propose five
specification matches between business components. To retrieval
reusable business components, we propose the measure of similarity
degrees to calculate the similarities between business components.
Finally, a business component retrieval command like SQL is
proposed to help user to retrieve approximate business components
from component repository.
Abstract: A Novel fuzzy neural network combining with support vector learning mechanism called support-vector-based fuzzy neural networks (SVBFNN) is proposed. The SVBFNN combine the capability of minimizing the empirical risk (training error) and expected risk (testing error) of support vector learning in high dimensional data spaces and the efficient human-like reasoning of FNN.
Abstract: An alternative approach to the use of Discrete Fourier
Transform (DFT) for Magnetic Resonance Imaging (MRI) reconstruction
is the use of parametric modeling technique. This method
is suitable for problems in which the image can be modeled by
explicit known source functions with a few adjustable parameters.
Despite the success reported in the use of modeling technique as an
alternative MRI reconstruction technique, two important problems
constitutes challenges to the applicability of this method, these are
estimation of Model order and model coefficient determination. In
this paper, five of the suggested method of evaluating the model
order have been evaluated, these are: The Final Prediction Error
(FPE), Akaike Information Criterion (AIC), Residual Variance (RV),
Minimum Description Length (MDL) and Hannan and Quinn (HNQ)
criterion. These criteria were evaluated on MRI data sets based on the
method of Transient Error Reconstruction Algorithm (TERA). The
result for each criterion is compared to result obtained by the use of a
fixed order technique and three measures of similarity were evaluated.
Result obtained shows that the use of MDL gives the highest measure
of similarity to that use by a fixed order technique.
Abstract: In this paper we present an energy efficient match-line
(ML) sensing scheme for high-speed ternary content-addressable
memory (TCAM). The proposed scheme isolates the sensing unit of
the sense amplifier from the large and variable ML capacitance. It
employs feedback in the sense amplifier to successfully detect a
match while keeping the ML voltage swing low. This reduced voltage
swing results in large energy saving. Simulation performed using
130nm 1.2V CMOS logic shows at least 30% total energy saving in
our scheme compared to popular current race (CR) scheme for
similar search speed. In terms of speed, dynamic energy, peak power
consumption and transistor count our scheme also shows better
performance than mismatch-dependant (MD) power allocation
technique which also employs feedback in the sense amplifier.
Additionally, the implementation of our scheme is simpler than CR
or MD scheme because of absence of analog control voltage and
programmable delay circuit as have been used in those schemes.
Abstract: Electricity market activities and a growing demand for electricity have led to heavily stressed power systems. This requires operation of the networks closer to their stability limits. Power system operation is affected by stability related problems, leading to unpredictable system behavior. Voltage stability refers to the ability of a power system to sustain appropriate voltage levels through large and small disturbances. Steady-state voltage stability is concerned with limits on the existence of steady-state operating points for the network. FACTS devices can be utilized to increase the transmission capacity, the stability margin and dynamic behavior or serve to ensure improved power quality. Their main capabilities are reactive power compensation, voltage control and power flow control. Among the FACTS controllers, Static Var Compensator (SVC) provides fast acting dynamic reactive compensation for voltage support during contingency events. In this paper, voltage stability assessment with appropriate representations of tap-changer transformers and SVC is investigated. Integrating both of these devices is the main topic of this paper. Effect of the presence of tap-changing transformers on static VAR compensator controller parameters and ratings necessary to stabilize load voltages at certain values are highlighted. The interrelation between transformer off nominal tap ratios and the SVC controller gains and droop slopes and the SVC rating are found. P-V curves are constructed to calculate loadability margins.
Abstract: We depend upon explanation in order to “make sense"
out of our world. And, making sense is all the more important when
dealing with change. But, what happens if our explanations are
wrong? This question is examined with respect to two types of
explanatory model. Models based on labels and categories we shall
refer to as “representations." More complex models involving
stories, multiple algorithms, rules of thumb, questions, ambiguity we
shall refer to as “compressions." Both compressions and
representations are reductions. But representations are far more
reductive than compressions. Representations can be treated as a set
of defined meanings – coherence with regard to a representation is
the degree of fidelity between the item in question and the definition
of the representation, of the label. By contrast, compressions contain
enough degrees of freedom and ambiguity to allow us to make
internal predictions so that we may determine our potential actions in
the possibility space. Compressions are explanatory via mechanism.
Representations are explanatory via category. Managers are often
confusing their evocation of a representation (category inclusion) as
the creation of a context of compression (description of mechanism).
When this type of explanatory error occurs, more errors follow. In
the drive for efficiency such substitutions are all too often proclaimed
– at the manager-s peril..
Abstract: The purpose of this paper is applied Taguchi method on the optimization for PEMFC performance, and a representative Computational Fluid Dynamics (CFD) model is selectively performed for statistical analysis. The studied factors in this paper are pressure of fuel cell, operating temperature, the relative humidity of anode and cathode, porosity of gas diffusion electrode (GDE) and conductivity of GDE. The optimal combination for maximum power density is gained by using a three-level statistical method. The results confirmed that the robustness of the optimum design parameters influencing the performance of fuel cell are founded by pressure of fuel cell, 3atm; operating temperature, 353K; the relative humidity of anode, 50%; conductivity of GDE, 1000 S/m, but the relative humidity of cathode and porosity of GDE are pooled as error due to a small sum of squares. The present simulation results give designers the ideas ratify the effectiveness of the proposed robust design methodology for the performance of fuel cell.
Abstract: The effect of flooding can be a serious problem for
wheat farmers, even at dry land condition. Amount of flooding
damage depends on duration flooding, developmental stage, wheat
type and variety. Therefore as a factorial experiment in randomized
complete design based on winter bread wheat cultivars (Pishtaz,
Marvdasht, Shiraz, Zarin, Shahriar, C-81-4, Sardari, Agosta seed,
FGS and Azar2) at stages (Non- flooding stress, flooding at tillering
and stem elongation stages for 15 days) carried out in Faculty of
Agriculture, Razi University, Kermanshah, Iran. During flooding,
soil environment of plant roots were water saturated. Analysis of
variance showed that flooding had a significant effect on the number
of grains per spike, grain weight per spike and a grain weight. Hence
flooding reduces the number of grain per spike between 27.1 to 42.5
percent, grain weight per spike between 34.7 to 54.4 percent and
single grain weight between 12.1 to 15.1 percent. Effects of flooding
at the tillering stage reduced higher than stem elongation stage on
studied traits. The result also showed that flooding at tillering stage
delayed spikelet primordial and floret. Between wheat cultivars was
significant for traits, but were different reactions. "Shiraz", "Zarin"
and "Shahriar" had the most no. grain per spike, but "Zarin" and
"Sardari" had the most grain weight per spike and single grain
weight, respectively. Also, interaction between start of flooding and
cultivar was significant.
Abstract: In this study, the effect of L-arginine was examined at the neuromuscular junction of the chick biventer cervicis muscle. LArginine at 500 μg/ ml, decreased twitch response to electerical stimulation, and produced rightward shift of the dose- response curve for acetylcholine or carbachol. L-Arginine at 1000μg/ ml produced a strong shift to the right of the dose – response curve for acetylcholine or carbachol with a reduction in the efficacy. The inhibitory effect of L-arginine on the twitch response was blocked by caffeine (200μg/ ml). NO levels were also measured in the chick biventer cervicis muscle homogenates, using spectrophotometric method for the direct detection of NO, nitrite and nitrate. Total nitrite (nitrite + nitrate) was measured by a spectrophotometer at 540 nm after the conversion of nitrate to nitrite by copperized cadmium granules. NO levels were found to be significantly increased in concentrations 500 and 1000μg/ ml of L-arginine in comparison with the control group (p
Abstract: In automotive systems almost all steps concerning the
calibration of several control systems, e.g., low idle governor or
boost pressure governor, are made with the vehicle because the timeto-
production and cost requirements on the projects do not allow for
the vehicle analysis necessary to build reliable models. Here is
presented a procedure using parametric and NN (neural network)
models that enables the generation of vehicle system models based
on normal ECU engine control unit) vehicle measurements. These
models are locally valid and permit pre and follow-up calibrations so
that, only the final calibrations have to be done with the vehicle.
Abstract: Geopolymer cement was evaluated as wellbore sealing material for carbon dioxide geosequestration application. Curing of cement system in saline water and strength testing in triaxial stress state condition under lateral confinement is relevant to primary cementing in CO2 geosequestration wellbore in saline aquifer. Geopolymer cement was cured in saline water (both at ambient conditions for 28 days and heated (60°C) conditions for 12 hours) and tested for triaxial strength at different levels of lateral confinement. Normal water and few other curing techniques were also studied both for geopolymer and API ‘G’ cement. Results reported were compared to evaluate the suitability of saline water for curing of geopolymer cement. Unconfined compression test results showed higher strength for curing in saline water than normal water. Besides, testing strength under lateral confinement demonstrated the material failure behavior from brittle to plastic.
Abstract: This study analyzes characteristics determining
member’s willingness to invest in cooperatives using ordered logit
model. The data were collected in a field survey among 122
cooperative members in north-central China. The descriptive analysis
of survey evidence suggests that cooperatives in China generally
having poor ability to deliver the processing services related to
product package, grading, and storage, performing worse in
profitability, inability of providing returns to capital and obtaining
agricultural loan. The regression results demonstrate that members’
farm size, their satisfaction with cooperative price preferential
services, attitudes toward cooperative operational scale and
development potential have statistically significant impact on
willingness to invest.
Abstract: Pressure vessels are usually operating at temperatures
where the conditions of linear elastic fracture mechanics are no
longer met because massive plasticity precedes crack propagation. In
this work the development of a surface crack in a pressure vessel
subject to bending and tension under elastic-plastic fracture
mechanics conditions was investigated. Finite element analysis was
used to evaluate the hydrostatic stress, the J-integral and crack
growth for semi-elliptical surface-breaking cracks. The results
showed non-uniform stress triaxiality and crack driving force around
the crack front at large deformation levels. Different ductile crack
extensions were observed which emphasis the dependent of ductile
tearing on crack geometry and type of loading. In bending the crack
grew only beneath the surface, and growth was suppressed at the
deepest segment. This contrasts to tension where the crack breaks
through the thickness with uniform growth along the entire crack
front except at the free surface. Current investigations showed that
the crack growth developed under linear elastic fracture mechanics
conditions will no longer be applicable under ductile tearing
scenarios.
Abstract: In today-s competitive global business environment,
the concept of supply chain management (SCM) continues to become
increasingly market-oriented, shifting the primary driver of the value
chain from supply to demand. Recent recommendations encourage
researchers to focus investigations on the supply chain process
integration (SCPI) capabilities that integrate a focal firm with its
network of suppliers and business customers to create value for it.
However, theoretical and empirical researches pertaining to the
antecedents and consequences of a focal firm-s SCPI capabilities have
been limited and piecemeal. The purpose of this study is to investigate
the critical determinants and consequences of a focal firm-s SCPI
capabilities. We test our proposed research framework using a sample
of 139 sales managers of manufacturing industries in Taiwan, our
research findings show that (1) both perceived business customer-s
power and focal firm-s market-oriented culture positively influences a
focal firm-s SCPI capabilities, and (2) SCPI capabilities positively
influence a focal firm-s SCM performance, both operational and
strategic benefits. Implications for practitioners and researchers and
suggestions for future research are also addressed in this study.
Abstract: The study aimed to verify a hypothesis that a sense of
fulfillment in student life and perceived stress in training in the
facilities could affect vocational identity among social welfare
university students, in order to acquire implications for enhancing the
vocational consciousness. A questionnaire survey was conducted with
388 third- and fourth-year students of training course for certified
social workers in three universities in A prefecture in Japan. The
questionnaire was returned by 338 students, and 288 responses
(85.2%) were valid and used for the analysis. As a SEM result, the
hypothesized model proved to be fit to the data. Path coefficient of
sense of fulfillment of student life to vocational identity was
statistically positive. Path coefficient of training stress to vocational
identity was statistically negative.
Abstract: Dehydration of methanol to dimethyl ether (DME)
over a commercial Al2O3 catalyst was studied in an isothermal integral
fixed bed reactor. The experiments were performed on the temperature
interval 513-613 K, liquid hourly space velocity (LHSV) of 0.9-2.1h-1,
pressures between 0.1 and 1.0 MPa. The effect of different operation
conditions on the dehydration of methanol was investigated in a
laboratory scale experiment. A new intrinsic kinetics equation based
on the mechanism of Langmuir-Hinshelwood dissociation adsorption
was developed for the dehydration reaction by fitting the expressions
to the experimental data. An activation energy of 67.21 kJ/mol was
obtained for the catalyst with the best performance. Statistic test
showed that this new intrinsic kinetics equation was acceptable.
Abstract: Random Access Memory (RAM) is an important
device in computer system. It can represent the snapshot on how the
computer has been used by the user. With the growth of its
importance, the computer memory has been an issue that has been
discussed in digital forensics. A number of tools have been developed
to retrieve the information from the memory. However, most of the
tools have their limitation in the ability of retrieving the important
information from the computer memory. Hence, this paper is aimed
to discuss the limitation and the setback for two main techniques such
as process signature search and process enumeration. Then, a new
hybrid approach will be presented to minimize the setback in both
individual techniques. This new approach combines both techniques
with the purpose to retrieve the information from the process block
and other objects in the computer memory. Nevertheless, the basic
theory in address translation for x86 platforms will be demonstrated
in this paper.
Abstract: Operational safety of critical systems, such as nuclear power plants, industrial chemical processes and means of transportation, is a major concern for system engineers and operators. A means to assure that is on-line safety monitors that deliver three safety tasks; fault detection and diagnosis, alarm annunciation and fault controlling. While current monitors deliver these tasks, benefits and limitations in their approaches have at the same time been highlighted. Drawing from those benefits, this paper develops a distributed monitor based on semi-independent agents, i.e. a multiagent system, and monitoring knowledge derived from a safety assessment model of the monitored system. Agents are deployed hierarchically and provided with knowledge portions and collaboration protocols to reason and integrate over the operational conditions of the components of the monitored system. The monitor aims to address limitations arising from the large-scale, complicated behaviour and distributed nature of monitored systems and deliver the aforementioned three monitoring tasks effectively.
Abstract: We have fabricated a-IGZO TFT and investigated the
stability under positive DC and AC bias stress. The threshold voltage
of a-IGZO TFT shifts positively under those biases, and that reduces
on-current. For this reason, conventional shift-register circuit
employing TFTs which stressed by positive bias will be unstable, may
do not work properly. We have designed a new 6-transistor
shift-register, which has less transistors than prior circuits. The TFTs
of the proposed shift-register are not suffering from positive DC or AC
stress, mainly kept unbiased. Despite the compact design, the stable
output signal was verified through the SPICE simulation even under
RC delay of clock signal.