Abstract: Reno-pin contact test is a method that is controlled by
DC motor used to characterize electronic chips. This method is used in
electronic and telecommunication devices. A new electric
performance testing system is developed in which the testing method
is controlled by using Piezoelectric Transducer (PZT) instead of DC
motor which reduces vibration and noise. The vertical displacement of
the Reno-pin is very short in the Reno-pin contact testing system. Now
using a flexible guide in the new Reno-pin contact system, the vertical
movement of the Reno-pin is increased many times of the existing
Reno-pin contact testing method using DC motor. Using the present
electric performance testing system with a flexible hinge and PZT
instead of DC motor, manufacturing of electronic chips are able to
characterize chips with low cost and high speed.
Abstract: Analytically the effect of polarization dependent loss on a high speed fiber optic communication link has been investigated. PDL and the signal's incoming state of polarization (SOP) have a significant co-relation between them and their various combinations produces different effects on the system behavior which has been inspected. Pauli's spin operator and PDL parameters are combined together to observe the attenuation effect induced by PDL in a link containing multiple PDL elements. It is found that in the presence of PDL the Q-factor and BER at the receiver undergoes fluctuation causing the system to be unstable and results show that it is mainly due to optical-signal-to-parallel-noise ratio (OSNItpar) that these parameters fluctuate. Generally the Q-factor, BER deteriorates as the value of average PDL in the link increases except for depolarized light for which the system parameters improves when PDL increases.
Abstract: We developed a vision interface immersive projection system, CAVE in virtual rea using hand gesture recognition with computer vis background image was subtracted from current webcam and we convert the color space of the imag Then we mask skin regions using skin color range t a noise reduction operation. We made blobs fro gestures were recognized using these blobs. Using recognition, we could implement an effective bothering devices for CAVE. e framework for an reality research field vision techniques. ent image frame age into HSV space. e threshold and apply from the image and ing our hand gesture e interface without
Abstract: A biocompatible ferrofluid have been prepared by coprecipitation
of FeCl2.4H2O and FeCl3.6H2O under ultrasonic
irradiation and with NaOH as alkaline agent. Cystein was also used
as capping agent in the solution. Magnetic properties of the produced
ferrofluid were then determined by VSM test and magnetite
nanoparticles were characterized by XRD and TEM techniques. The
effect of surfactant to Fe ion weight ratio was also studied during this
project by using two different amount of Dextran. Results showed the
presence of a biocompatible superparamagnetic ferrofluid including
magnetite nanoparticles with particle size ranging under 20 nm. The
increase in the surfactant content results in the narrowing of the size
distribution and reduction of the particle size and more solution
stability.
Abstract: Automatic tube current modulation (ATCM) systems are available for all CT manufacturers and are used for the majority of patients. Understanding how the systems work and their influence on patient dose and image quality is important for CT users, in order to gain the most effective use of the systems. In the present study, a new phantom was used for evaluating dose distribution and image quality under the ATCM operation for the Toshiba Aquilion 64 CT scanner using different ATCM options and a fixed mAs technique. A routine chest, abdomen and pelvis (CAP) protocol was selected for study and Gafchromic film was used to measure entrance surface dose (ESD), peripheral dose and central axis dose in the phantom. The results show the dose reductions achievable with various ATCM options, in relation with the target noise. The doses and image noise distribution were more uniform when the ATCM system was implemented compared with the fixed mAs technique. The lower limit set for the tube current will affect the modulations especially for the lower dose option. This limit prevented the tube current being reduced further and therefore the lower dose ATCM setting resembled a fixed mAs technique. Selection of a lower tube current limit is likely to reduce doses for smaller patients in scans of chest and neck regions.
Abstract: Establishing pumping stations is one of the most common ways of providing water from rivers. There are many issues involved in the design and operation of pumping stations most important of which is the problem of sedimentation. One of the significant issues which must be taken into consideration in designing pumping stations is the operation method and technical matters related to it. Safety and convenience of operation is one of the issues that must be always considered by the designer. Some of the major issues in making decisions regarding the type of design for the station are geographical condition, the location of the station and availability of experts in maintenance and operation of the station. Dimensions of the station must allow free movement for checking and operating pumps after installation of pumps and plumbing system.
Abstract: The motivation for adaptive modulation and coding is
to adjust the method of transmission to ensure that the maximum
efficiency is achieved over the link at all times. The receiver
estimates the channel quality and reports it back to the transmitter.
The transmitter then maps the reported quality into a link mode. This
mapping however, is not a one-to-one mapping. In this paper we
investigate a method for selecting the proper modulation scheme.
This method can dynamically adapt the mapping of the Signal-to-
Noise Ratio (SNR) into a link mode. It enables the use of the right
modulation scheme irrespective of changes in the channel conditions
by incorporating errors in the received data. We propose a Markov
model for this method, and use it to derive the average switching
thresholds and the average throughput. We show that the average
throughput of this method outperforms the conventional threshold
method.
Abstract: This paper proposes a location-aware system for
household robots which allows users to paste predefined paper tags at
different locations according to users- comprehension of the house. In this system a household robot may be aware of its location and the
attributes thereof by visually recognizing the tags when the robot is moving. This paper also presents a novel user interface to define a
moving path of the robot, which allows users to draw the path in the air
with a finger so as to generate commands for following motions.
Abstract: The approaches to make an agent generate intelligent actions in the AI field might be roughly categorized into two ways–the classical planning and situated action system. It is well known that each system have its own strength and weakness. However, each system also has its own application field. In particular, most of situated action systems do not directly deal with the logical problem. This paper first briefly mentions the novel action generator to situatedly extract a set of actions, which is likely to help to achieve the goal at the current situation in the relaxed logical space. After performing the action set, the agent should recognize the situation for deciding the next likely action set. However, since the extracted action is an approximation of the action which helps to achieve the goal, the agent could be caught into the deadlock of the problem. This paper proposes the newly developed hybrid architecture to solve the problem, which combines the novel situated action generator with the conventional planner. The empirical result in some planning domains shows that the quality of the resultant path to the goal is mostly acceptable as well as deriving the fast response time, and suggests the correlation between the structure of problems and the organization of each system which generates the action.
Abstract: A novel biologically inspired controller for the autonomous
navigation of a mobile robot in an evasion task is
proposed. The controller takes advantage of the environment by
calculating a measure of danger and subsequently choosing the
parameters of a reinforcement learning based decision process.
Two different reinforcement learning algorithms were used: Qlearning
and Sarsa (λ). Simulations show that selecting dynamic
parameters reduce the time while executing the decision making
process, so the robot can obtain a policy to succeed in an escaping
task in a realistic time.
Abstract: We fabricated multi-walled carbon nanotube (MCNT)
emitters by an electroporetic deposition (EPD) method using a
MCNT-sodium dodecyl sulfate (SDS) suspension. MCNT films were
prepared on graphite tip using EPD. We observe field emission
properties of MCNT film after heat treatment. Consequently, The
MCNT film on graphite tip exhibit good electron emission current.
Abstract: Potassium monopersulfate has been decomposed in aqueous solution in the presence of Co(II). The process has been simulated by means of a mechanism based on elementary reactions. Rate constants have been taken from literature reports or, alternatively, assimilated to analogous reactions occurring in Fenton's chemistry. Several operating conditions have been successfully applied.
Abstract: The Continuously Adaptive Mean-Shift (CamShift)
algorithm, incorporating scene depth information is combined with
the l1-minimization sparse representation based method to form a
hybrid kernel and state space-based tracking algorithm. We take
advantage of the increased efficiency of the former with the
robustness to occlusion property of the latter. A simple interchange
scheme transfers control between algorithms based upon drift and
occlusion likelihood. It is quantified by the projection of target
candidates onto a depth map of the 2D scene obtained with a low cost
stereo vision webcam. Results are improved tracking in terms of drift
over each algorithm individually, in a challenging practical outdoor
multiple occlusion test case.
Abstract: In this study, the forty Thai medicinal plants were
used to screen the antibacterial activity against Campylobacter jejuni.
Crude 95% ethanolic extracts of each plant were prepared.
Antibacterial activity was investigated by the disc diffusion assay,
and MICs and MBCs were determined by broth microdilution. The
results of antibacterial screening showed that five plants have activity
against C.jejuni including Adenanthera pavonina L., Moringa
oleifera Lam., Annona squamosa L., Hibiscus sabdariffa L. and
Eupotorium odortum L. The extraction of A. pavonina L. and A.
squamosa L. produced an outstanding against C. jejuni, inhibiting
growth at 62.5-125 and 250-500 μg/mL, respectively. The MBCs of
two extracts were just 4-fold higher than MICs against C. jejuni,
suggesting the extracts are bactericidal against this species. These
results indicate that A. pavonina and A. squamosa could potentially
be used in modern applications aimed at treatment or prevention of
foodborne disease from C. jejuni.
Abstract: Culinary culture differences can cause health
problems for international tourists in Thailand. This paper drew upon
data collected from an international tourist survey conducted in
Bangkok, Thailand during summer of 2012. Summer is the period
that a variety food safety issues and incidents are often publicized in
Thailand. The survey targeted European Union tourists- concerns
toward a variety of food safety issues that they encountered during
their trip in Thailand. A total of 400 respondents were elicited as data
input for t-test, and one way ANOVA test. The findings revealed an
astonishing result that up to 46.5 percent of respondents were sick at
least one time or more in Thailand. However, the majority of
respondents trusted that the Thai hotel and Thai restaurants would
ensure food safety, but they did not trust street vendors to ensure food
safety. The level of food safety concern can be ranked from most
concern to least concern by using the value of mean scores as
follows: 1) artificial coloring, 2) use of preservatives, 3) antibiotics,
4) growth hormones, 5) chemical residues, and 6) bacterial
contamination. The overall mean score for level of concerns was
3.493 with standard deviation of 1.677 which did not indicate a very
high level of concern. In addition, the result for t-test and one way
ANOVA test revealed that there was not much effect from the
demographic differences to level of food safety concerns.
Abstract: This paper presents the mathematical model and
control strategy on DQ frame of shunt active power filter. The
structure of the shunt active power filter is the voltage source inverter
(VSI). The pulse width modulation (PWM) with PI controller is used
in the paper. The concept of DQ frame to apply with the shunt active
power filter is described. Moreover, the detail of the PI controller
design for two current loops and one voltage loop are fully explained.
The DQ axis with Fourier (DQF) method is applied to calculate the
reference currents on DQ frame. The simulation results show that the
control strategy and the design method presented in the paper can
provide the good performance of the shunt active power filter.
Moreover, the %THD of the source currents after compensation can
follow the IEEE Std.519-1992.
Abstract: Nowadays companies in all sectors are looking for the
sources of competitive advantages. Holistic marketing approach
searches for their emergence based on the integration of all
components and elements across the organization. Modern marketing
sees the sources of competitive advantage in implementing the latest
managerial practices, motivation, intelligent project management,
knowledge management, collaborative marketing, CSR and, in the
recent years, also in the business process optimization. With the use
of modern tools including business process management and business
process modelling the company can markedly increase its internal
efficiency which can lead not only to lowering the costs but to
creating the environment for optimal customer care, positive
corporate culture and for origination of innovations as well. In the
article the authors analyze the recent trend in this area and introduce
suggestions to companies to identify and optimize the key processes
that have a significant impact of the company´s competitiveness.
Abstract: The purpose of this research is to increase our
knowledge as regards how Small-and-Medium-Sized Enterprises
(SMEs) tackle ERP implementation projects to achieve successful
adoption and use of these systems within the organization. SMEs
have scare resources to handle these kinds of projects which have
proved to be risky and costly. There are several studies focusing on
ERP implementation in larger companies, however, few studies
report on challenges experienced by SMEs. Our research seeks to
bridge this gap. Through a multiple case study of four companies, we
identified challenges and critical elements within the different phases
(pre-implementation, implementation and post-implementation) of
the ERP life cycle. To interpret our findings, we utilize a well-know
ERP life cycle model and critical success factors developed for larger
companies which are reported in former research literature. We
discuss if these models are relevant for SMEs and suggest additional
critical elements identified in this study to make a framework more
adapted to the SME context.
Abstract: The importance of our country-s communication
system is noticeable when a disaster occurs. The communication
system in our country includes wired and wireless telephone
networks, radio, satellite system and more increasingly internet. Even
though our communication system is most extensive and dependable,
extreme conditions can put a strain on them. Interoperability between
heterogeneous wireless networks can be used to provide efficient
communication for emergency first response. IEEE 802.21 specifies
Media Independent Handover (MIH) services to enhance the mobile
user experience by optimizing handovers between heterogeneous
access networks. This paper presents an algorithm to improve
congestion control in MIH framework. It is analytically shown that
by including time factor in network selection we can optimize
congestion in the network.
Abstract: This paper deals with automatic sentence modality
recognition in French. In this work, only prosodic features are
considered. The sentences are recognized according to the three
following modalities: declarative, interrogative and exclamatory
sentences. This information will be used to animate a talking head for
deaf and hearing-impaired children. We first statistically study a real
radio corpus in order to assess the feasibility of the automatic
modeling of sentence types. Then, we test two sets of prosodic
features as well as two different classifiers and their combination. We
further focus our attention on questions recognition, as this modality
is certainly the most important one for the target application.