Abstract: Chatter vibration has been a troublesome problem for a
machine tool toward the high precision and high speed machining.
Essentially, the machining performance is determined by the dynamic
characteristics of the machine tool structure and dynamics of cutting
process. Therefore the dynamic vibration behavior of spindle tool
system greatly determines the performance of machine tool. The
purpose of this study is to investigate the influences of the machine
frame structure on the dynamic frequency of spindle tool unit through
finite element modeling approach. To this end, a realistic finite
element model of the vertical milling system was created by
incorporated the spindle-bearing model into the spindle head stock of
the machine frame. Using this model, the dynamic characteristics of
the milling machines with different structural designs of spindle head
stock and identical spindle tool unit were demonstrated. The results of
the finite element modeling reveal that the spindle tool unit behaves
more compliant when the excited frequency approaches the natural
mode of the spindle tool; while the spindle tool show a higher dynamic
stiffness at lower frequency that may be initiated by the structural
mode of milling head. Under this condition, it is concluded that the
structural configuration of spindle head stock associated with the
vertical column of milling machine plays an important role in
determining the machining dynamics of the spindle unit.
Abstract: In this article we present a change point detection algorithm based on the continuous wavelet transform. At the beginning of the article we describe a necessary transformation of a signal which has to be made for the purpose of change detection. Then case study related to iron ore sinter production which can be solved using our proposed technique is discussed. After that we describe a probabilistic algorithm which can be used to find changes using our transformed signal. It is shown that our algorithm works well with the presence of some noise and abnormal random bursts.
Abstract: In this paper a new approach for transmission pricing
is presented. The main idea is voltage angle allocation, i.e.
determining the contribution of each contract on the voltage angle of
each bus. DC power flow is used to compute a primary solution for
angle decomposition. To consider the impacts of system non-linearity
on angle decomposition, the primary solution is corrected in different
iterations of decoupled Newton-Raphson power flow. Then, the
contribution of each contract on power flow of each transmission line
is computed based on angle decomposition. Contract-related flows
are used as a measure for “extent of use" of transmission network
capacity and consequently transmission pricing. The presented
approach is applied to a 4-bus test system and IEEE 30-bus test
system.
Abstract: The Economic factors are leading to the rise of
infrastructures provides software and computing facilities as a
service, known as cloud services or cloud computing. Cloud services
can provide efficiencies for application providers, both by limiting
up-front capital expenses, and by reducing the cost of ownership over
time. Such services are made available in a data center, using shared
commodity hardware for computation and storage. There is a varied
set of cloud services available today, including application services
(salesforce.com), storage services (Amazon S3), compute services
(Google App Engine, Amazon EC2) and data services (Amazon
SimpleDB, Microsoft SQL Server Data Services, Google-s Data
store). These services represent a variety of reformations of data
management architectures, and more are on the horizon.
Abstract: In the first part of this paper [6], a method to
determine Frenet apparatus of the space-like curves in Minkowski
space-time is presented. In this work, the mentioned method is
developed for the time-like curves in Minkowski space-time.
Additionally, an example of presented method is illustrated.
Abstract: This paper presents a new approach for intelligent agent communication based on ontology for agent community. DARPA agent markup language (DAML) is used to build the community ontology. This paper extends the agent management specification by the foundation for intelligent physical agents (FIPA) to develop an agent role called community facilitator (CF) that manages community directory and community ontology. CF helps build agent community. Precise description of agent service in this community can thus be achieved. This facilitates agent communication. Furthermore, through ontology update, agents with different ontology are capable of communicating with each other. An example of advanced traveler information system is included to illustrate practicality of this approach.
Abstract: The bromination of five selected pharmaceuticals
(metoprolol, naproxen, amoxicillin, hydrochlorotiazide and
phenacetin) in ultrapure water and in three water matrices (a
groundwater, a surface water from a public reservoir and a secondary
effluent from a WWTP) was investigated. The apparent rate
constants for the bromination reaction were determined as a function
of the pH, and the sequence obtained for the reaction rate was
amoxicillin > naproxen >> hydrochlorotiazide ≈ phenacetin ≈
metoprolol. The proposal of a kinetic mechanism, which specifies the
dissociation of bromine and each pharmaceutical according to their
pKa values and the pH allowed the determination of the intrinsic rate
constants for every elementary reaction. The influence of the main
operating conditions (pH, initial bromine dose, and the water matrix)
on the degradation of pharmaceuticals was established. In addition,
the presence of bromide in chlorination experiments was
investigated. The presence of bromide in wastewaters and drinking
waters in the range of 10 to several hundred μg L-1 accelerated
slightly the oxidation of the selected pharmaceuticals during chorine
disinfection.
Abstract: Present paper presents a parametric performancebased
design model for optimizing hospital design. The design model
operates with geometric input parameters defining the functional
requirements of the hospital and input parameters in terms of
performance objectives defining the design requirements and
preferences of the hospital with respect to performances. The design
model takes point of departure in the hospital functionalities as a set
of defined parameters and rules describing the design requirements
and preferences.
Abstract: The main goal in this paper is to quantify the quality of
different techniques for radiation treatment plans, a back-propagation
artificial neural network (ANN) combined with biomedicine theory
was used to model thirteen dosimetric parameters and to calculate
two dosimetric indices. The correlations between dosimetric indices
and quality of life were extracted as the features and used in the ANN
model to make decisions in the clinic. The simulation results show
that a trained multilayer back-propagation neural network model can
help a doctor accept or reject a plan efficiently. In addition, the
models are flexible and whenever a new treatment technique enters
the market, the feature variables simply need to be imported and the
model re-trained for it to be ready for use.
Abstract: Air bending is one of the important metal forming
processes, because of its simplicity and large field application.
Accuracy of analytical and empirical models reported for the analysis
of bending processes is governed by simplifying assumption and do
not consider the effect of dynamic parameters. Number of researches
is reported on the finite element analysis (FEA) of V-bending, Ubending,
and air V-bending processes. FEA of bending is found to be
very sensitive to many physical and numerical parameters. FE
models must be computationally efficient for practical use. Reported
work shows the 3D FEA of air bending process using Hyperform LSDYNA
and its comparison with, published 3D FEA results of air
bending in Ansys LS-DYNA and experimental results. Observing the
planer symmetry and based on the assumption of plane strain
condition, air bending problem was modeled in 2D with symmetric
boundary condition in width. Stress-strain results of 2D FEA were
compared with 3D FEA results and experiments. Simplification of
air bending problem from 3D to 2D resulted into tremendous
reduction in the solution time with only marginal effect on stressstrain
results. FE model simplification by studying the problem
symmetry is more efficient and practical approach for solution of
more complex large dimensions slow forming processes.
Abstract: This paper focuses on PSS/E modeling of wind farms
of Doubly-fed Induction Generator (DFIG) type and their impact on
issues of power system operation. Since Wind Turbine Generators
(WTG) don-t have the same characteristics as synchronous
generators, the appropriate modeling of wind farms is essential for
transmission system operators to analyze the best options of
transmission grid reinforcements as well as to evaluate the wind
power impact on reliability and security of supply. With the high
excepted penetration of wind power into the power system a
simultaneous loss of Wind Farm generation will put at risk power
system security and reliability. Therefore, the main wind grid code
requirements concern the fault ride through capability and frequency
operation range of wind turbines. In case of grid faults wind turbines
have to supply a definite reactive power depending on the
instantaneous voltage and to return quickly to normal operation.
Abstract: Data Structures and Algorithms is a module in most
Computer Science or Information Technology curricula. It is one of
the modules most students identify as being difficult. This paper
demonstrates how programming a solution for Sudoku can make
abstract concepts more concrete. The paper relates concepts of a
typical Data Structures and Algorithms module to a step by step
solution for Sudoku in a human type as opposed to a computer
oriented solution.
Abstract: Stirred tanks have applications in many chemical
processes where mixing is important for the overall performance of
the system. In present work 5%v of the tank is filled by solid particles
with diameter of 700 m that Rushton Turbine and Propeller impeller
is used for stirring. An Eulerian-Eulerian Multi Fluid Model coupled
and for modeling rotating of impeller, moving reference frame
(MRF) technique was used and standard-k- model was selected for
turbulency. Flow field, radial velocity and axial distribution of solid
for both of impellers was investigation and comparison. Comparisons
of simulation results between Rushton Turbine and propeller impeller
shows that final quality of solid-liquid slurry in different rotating
speed for propeller impeller is better than the Rushton Turbine.
Abstract: Copper sulfide nanoparticles (CuS) were successfully synthesized by the pulsed plasma in liquid method, using two copper rod electrodes submerged in molten sulfur. Low electrical energy and no high temperature were applied for synthesis. Obtained CuS nanoparticles were then analyzed by means of X-ray diffraction, Low and High Resolution Transmission Electron Microscopy, Electron Diffraction, X-ray Photoelectron, Raman Spectroscopies and Field Emission Scanning Electron Microscopy. XRD analysis revealed peaks for CuS with hexagonal phase composition. TEM and HRTEM studies showed that sizes of CuS nanoparticles ranged between 10-60 nm, with the average size of about 20 nm. Copper sulfide nanoparticles have short nanorod-like structure. Raman spectroscopy found peak for CuS at 474.2cm-1of Raman region.
Abstract: With the help of coincidence degree theory, sufficient
conditions for existence of periodic solutions for a food chain model
with functional responses on time scales are established.
Abstract: The Programmable Logic Controller (PLC) plays a
vital role in automation and process control. Grafcet is used for
representing the control logic, and traditional programming
languages are used for describing the pure algorithms. Grafcet is used
for dividing the process to be automated in elementary sequences that
can be easily implemented. Each sequence represent a step that has
associated actions programmed using textual or graphical languages
after case. The programming task is simplified by using a set of
subroutines that are used in several steps. The paper presents an
example of implementation for a punching machine for sheets and
plates. The use the graphical languages the programming of a
complex sequential process is a necessary solution. The state of
Grafcet can be used for debugging and malfunction determination.
The use of the method combined with a set of knowledge acquisition
for process application reduces the downtime of the machine and
improve the productivity.
Abstract: In the era of great competition, understanding and satisfying
customers- requirements are the critical tasks for a company
to make a profits. Customer relationship management (CRM) thus
becomes an important business issue at present. With the help of
the data mining techniques, the manager can explore and analyze
from a large quantity of data to discover meaningful patterns and
rules. Among all methods, well-known association rule is most
commonly seen. This paper is based on Apriori algorithm and uses
genetic algorithms combining a data mining method to discover fuzzy
classification rules. The mined results can be applied in CRM to
help decision marker make correct business decisions for marketing
strategies.
Abstract: This study has applied the L16 orthogonal array of the
Taguchi method to determine the optimized polymeric
Nanocomposite asphalt binder. Three control factors are defined as
polypropylene plastomer (PP), styrene-butadiene-styrene elastomer
(SBS) and Nanoclay. Four level of concentration contents are
introduced for prepared asphalt binder samples. all samples were
prepared with 4.5% of bitumen 60/70 content. Compressive strength
tests were carried out for defining the optimized sample via
QUALITEK-4 software. SBS with 3%, PP with 5 % and Nanoclay
with 1.5% of concentrations are defined as the optimized
Nanocomposite asphalt binders. The confirmation compressive
strength and also softening point tests showed that modification of
asphalt binders with this method, improved the compressive strength
and softening points of asphalt binders up to 55%.
Abstract: An experiment was conducted on the comparative
study of drip and furrow irrigation methods at the farmer-s field in
Umar Kot. The total area under experiment about 4000m2 was
divided into two equal portions. One portion about 40m X 50m was
occupied by drip and the other portion about 40m X 50m by furrow
irrigation method. Soil at the experimental site was clay loam in
texture for 0-60cm depth; average dry bulk density and field capacity
was 1.16g/cm3 and 28.5% respectively. The results reveal that the
drip irrigation method saved 56.4% water and gave 22% more yield
as compared to that of furrow irrigation method. Higher water use
efficiency about 4.87 was obtained in drip irrigation method; whereas
lower water used efficiency about 1.66 was obtained in furrow
irrigation method. The present study suggests farming community to
adopt drip irrigation method instead of old traditional flooding
methods.
Abstract: Empirical insights into the implementation of logistics competencies at the top management level are scarce. This paper addresses this issue with an explorative approach which is based on a dataset of 872 observations in the years 2000, 2004 and 2008 using quantitative content analysis from annual reports of the 500 publicly listed firms with the highest global research and development expenditures according to the British Department for Business Innovation and Skills. We find that logistics competencies are more pronounced in Asian companies than in their European or American counterparts. On an industrial level the results are quite mixed. Using partial point-biserial correlations we show that logistics competencies are positively related to financial performance.