Abstract: In this paper we consider a one-dimensional random
geometric graph process with the inter-nodal gaps evolving according
to an exponential AR(1) process. The transition probability matrix
and stationary distribution are derived for the Markov chains concerning
connectivity and the number of components. We analyze the
algorithm for hitting time regarding disconnectivity. In addition to
dynamical properties, we also study topological properties for static
snapshots. We obtain the degree distributions as well as asymptotic
precise bounds and strong law of large numbers for connectivity
threshold distance and the largest nearest neighbor distance amongst
others. Both exact results and limit theorems are provided in this
paper.
Abstract: In the article the remains of the base of the minaret,
found in 2009 at the medieval fortress shakhristan Aktobe, which is
located along the courses of the rivers Balta and Aksu. The minaret,
which consists of two parts: the stylobate in the pit and base part
refers to the XI-XII centuries. The preserved height of the building is
3.6 meters. Volume stylobat quadrangular minaret, the corners of
which are aimed at the four corners of the world amounts to 8,65 x8,
5 m, height – 2.6 m. Diameter octagonal upper cap of 7.85 m and a
height of preserved – 1 m. This minaret is of particular importance
among the historical and architectural monuments of Kazakhstan, as
it is so far the only minaret belonging to Karakhanid epoch in which
Islam was the state religion.
Abstract: Compared to oil production from microorganisms, little work has been performed for mixed culture of microalgae and yeast. In this article it is aimed to show high oil accumulation potential of mixed culture of microalgae Chlorella sp. KKU-S2 and oleaginous yeast Torulaspora maleeae Y30 using sugarcane molasses as substrate. The monoculture of T. maleeae Y30 grew faster than that of microalgae Chlorella sp. KKU-S2. In monoculture of yeast, a biomass of 6.4g/L with specific growth rate (m) of 0.265 (1/d) and lipid yield of 0.466g/L were obtained, while 2.53g/L of biomass with m of 0.133 (1/d) and lipid yield of 0.132g/L were obtained for monoculture of Chlorella sp. KKU-S2. The biomass concentration in the mixed culture of T. maleeae Y30 with Chlorella sp. KKU-S2 increased faster and was higher compared with that in the monoculture and mixed culture of microalgae. In mixed culture of microalgae Chlorella sp. KKU-S2 and C. vulgaris TISTR8580, a biomass of 3.47g/L and lipid yield of 0.123 g/L were obtained. In mixed culture of T. maleeae Y30 with Chlorella sp. KKU-S2, a maximum biomass of 7.33 g/L and lipid yield of 0.808g/L were obtained. Maximum cell yield coefficient (YX/S, 0.229g/L), specific yield of lipid (YP/X, 0.11g lipid/g cells) and volumetric lipid production rate (QP, 0.115 g/L/d) were obtained in mixed culture of yeast and microalgae. Clearly, T. maleeae Y30 and Chlorella sp. KKU-S2 use sugarcane molasses as organic nutrients efficiently in mixed culture under mixotrophic growth. The biomass productivity and lipid yield are notably enhanced in comparison with monoculture.
Abstract: The mechanical behavior of porous media is governed by the interaction between its solid skeleton and the fluid existing inside its pores. The interaction occurs through the interface of gains and fluid. The traditional analysis methods of porous media, based on the effective stress and Darcy's law, are unable to account for these interactions. For an accurate analysis, the porous media is represented in a fluid-filled porous solid on the basis of the Biot theory of wave propagation in poroelastic media. In Biot formulation, the equations of motion of the soil mixture are coupled with the global mass balance equations to describe the realistic behavior of porous media. Because of irregular geometry, the domain is generally treated as an assemblage of fmite elements. In this investigation, the numerical formulation for the field equations governing the dynamic response of fluid-saturated porous media is analyzed and employed for the study of transient wave motion. A finite element model is developed and implemented into a computer code called DYNAPM for dynamic analysis of porous media. The weighted residual method with 8-node elements is used for developing of a finite element model and the analysis is carried out in the time domain considering the dynamic excitation and gravity loading. Newmark time integration scheme is developed to solve the time-discretized equations which are an unconditionally stable implicit method Finally, some numerical examples are presented to show the accuracy and capability of developed model for a wide variety of behaviors of porous media.
Abstract: The growth of the aquaculture industry has been
associated with negative environmental impacts through the
discharge of raw effluents into the adjacent receiving water bodies.
Macrophytes from natural saline lakes, which have adaptability to the
high salinity, can be suitable for saline effluent treatment. Eight
emergent species from natural saline area were planted in an
experimental gravel bed hydroponic mesocosm (GBH) which was
treated with effluent water from an intensive fish farm using
geothermal water. In order to examine the applicability of the
halophytes in treatment processes, we tested the relative efficacy of
total nitrogen (TN), total phosphorus (TP), potassium (K), sodium
(Na), magnesium (Mg) and calcium (Ca) removal for the saline
wastewater treatment. Four of the eight species, which were
Phragmites australis, Typha angustifolia, Glyceria maxima, Scirpus
lacustris spp. tabernaemontani could survive and contribute the
experimental treatment.
Abstract: Discussion and development of principles of the
uniform nation formation within the limits of the Kazakhstan state
obviously became one of the most pressing questions of the day. The
fact that this question has not been solved "from above" as many
other questions has caused really brisk discussion, shows us increase
of civil consciousness in Kazakhstan society, and also the actuality of
this theme which can be carried in the category of fatal questions. In
any sense, nation building has raised civil society to a much higher
level. It would be better to begin with certain definitions. First is the
word "nation". The second is the "state". Both of these terms are very
closely connected with each other, so that in English language they
are in general synonyms. In Russian more shades of these terms
exist. For example in Kazakhstan the citizens of the country
irrespective of nationality (but mainly with reference to non-kazakhs)
are called «kazakhstanians», while the name of the title nation is
\"Kazakhs\". The same we can see in Russia, where, for example, the
Chechen or the Yakut –are \"Rossiyane\" which means “the citizens
of Russian Federation, but not \"Russians\".
The paper was written under the research project “Islam in modern
Kazakhstan: the nature and outcome of the religious revival”.
Abstract: Innovations in technology have created new ethical
challenges. Essential use of electronic communication in the
workplace has escalated at an astronomical rate over the past decade.
As such, legal and ethical dilemmas confronted by both the employer
and the employee concerning managerial control and ownership of einformation
have increased dramatically in the USA. From the
employer-s perspective, ownership and control of all information
created for the workplace is an undeniable source of economic
advantage and must be monitored zealously. From the perspective of
the employee, individual rights, such as privacy, freedom of speech,
and freedom from unreasonable search and seizure, continue to be
stalwart legal guarantees that employers are not legally or ethically
entitled to abridge in the workplace. These issues have been the
source of great debate and the catalyst for legal reform. The fine line
between ethical and legal has been complicated by emerging
technologies. This manuscript will identify and discuss a number of
specific legal and ethical issues raised by the dynamic electronic
workplace and conclude with suggestions that employers should
follow to respect the delicate balance between employees- legal
rights to privacy and the employer's right to protect its knowledge
systems and infrastructure.
Abstract: Mapping between local and global coordinates is an
important issue in finite element method, as all calculations are
performed in local coordinates. The concern arises when subparametric
are used, in which the shape functions of the field variable
and the geometry of the element are not the same. This is particularly
the case for C* elements in which the extra degrees of freedoms
added to the nodes make the elements sub-parametric. In the present
work, transformation matrix for C1* (an 8-noded hexahedron
element with 12 degrees of freedom at each node) is obtained using
equivalent C0 elements (with the same number of degrees of
freedom). The convergence rate of 8-noded C1* element is nearly
equal to its equivalent C0 element, while it consumes less CPU time
with respect to the C0 element. The existence of derivative degrees
of freedom at the nodes of C1* element along with excellent
convergence makes it superior compared with it equivalent C0
element.
Abstract: Artificial Immune System is adopted as a Heuristic
Algorithm to solve the combinatorial problems for decades.
Nevertheless, many of these applications took advantage of the benefit
for applications but seldom proposed approaches for enhancing the
efficiency. In this paper, we continue the previous research to develop
a Self-evolving Artificial Immune System II via coordinating the T
and B cell in Immune System and built a block-based artificial
chromosome for speeding up the computation time and better
performance for different complexities of problems. Through the
design of Plasma cell and clonal selection which are relative the
function of the Immune Response. The Immune Response will help
the AIS have the global and local searching ability and preventing
trapped in local optima. From the experimental result, the significant
performance validates the SEAIS II is effective when solving the
permutation flows-hop problems.
Abstract: Cosmic showers, during the transit through space, produce
sub - products as a result of interactions with the intergalactic
or interstellar medium which after entering earth generate secondary
particles called Extensive Air Shower (EAS). Detection and analysis
of High Energy Particle Showers involve a plethora of theoretical and
experimental works with a host of constraints resulting in inaccuracies
in measurements. Therefore, there exist a necessity to develop a
readily available system based on soft-computational approaches
which can be used for EAS analysis. This is due to the fact that soft
computational tools such as Artificial Neural Network (ANN)s can be
trained as classifiers to adapt and learn the surrounding variations. But
single classifiers fail to reach optimality of decision making in many
situations for which Multiple Classifier System (MCS) are preferred
to enhance the ability of the system to make decisions adjusting
to finer variations. This work describes the formation of an MCS
using Multi Layer Perceptron (MLP), Recurrent Neural Network
(RNN) and Probabilistic Neural Network (PNN) with data inputs
from correlation mapping Self Organizing Map (SOM) blocks and
the output optimized by another SOM. The results show that the setup
can be adopted for real time practical applications for prediction
of primary energy and location of EAS from density values captured
using detectors in a circular grid.
Abstract: In Image processing the Image compression can improve
the performance of the digital systems by reducing the cost and
time in image storage and transmission without significant reduction
of the Image quality. This paper describes hardware architecture of
low complexity Discrete Cosine Transform (DCT) architecture for
image compression[6]. In this DCT architecture, common computations
are identified and shared to remove redundant computations
in DCT matrix operation. Vector processing is a method used for
implementation of DCT. This reduction in computational complexity
of 2D DCT reduces power consumption. The 2D DCT is performed
on 8x8 matrix using two 1-Dimensional Discrete cosine transform
blocks and a transposition memory [7]. Inverse discrete cosine
transform (IDCT) is performed to obtain the image matrix and
reconstruct the original image. The proposed image compression
algorithm is comprehended using MATLAB code. The VLSI design
of the architecture is implemented Using Verilog HDL. The proposed
hardware architecture for image compression employing DCT was
synthesized using RTL complier and it was mapped using 180nm
standard cells. . The Simulation is done using Modelsim. The
simulation results from MATLAB and Verilog HDL are compared.
Detailed analysis for power and area was done using RTL compiler
from CADENCE. Power consumption of DCT core is reduced to
1.027mW with minimum area[1].
Abstract: In this paper, a semi empirical formula is presented based on the experimental results to predict the first pick (maximum force) value in the instantaneous folding force- axial distance diagram of a square column. To achieve this purpose, the maximum value of the folding force was assumed to be a function of the average folding force. Using the experimental results, the maximum value of the force necessary to initiate the first fold in a square column was obtained with respect to the geometrical quantities and material properties. Finally, the results obtained from the semi empirical relation in this paper, were compared to the experimental results which showed a good correlation.
Abstract: In this paper we suggest a method for setting
electronic credits for the customers. In this method banks and
market-sites help each other to make doing large shopping through
internet so easy. By developing this system, the people who have less
money to buy most of the things they want, become able to buy all of
them just through a credit. This credit is given by market-sites
through a banking control on it. The method suggested can stop
being imprisoned because of banking debts.
Abstract: Since communications between tag and reader in RFID
system are by radio, anyone can access the tag and obtain its any
information. And a tag always replies with the same ID so that it is
hard to distinguish between a real and a fake tag. Thus, there are many
security problems in today-s RFID System. Firstly, unauthorized
reader can easily read the ID information of any Tag. Secondly,
Adversary can easily cheat the legitimate reader using the collected
Tag ID information, such as the any legitimate Tag. These security
problems can be typically solved by encryption of messages
transmitted between Tag and Reader and by authentication for Tag.
In this paper, to solve these security problems on RFID system, we
propose the Tag Authentication Scheme based on self shrinking
generator (SSG). SSG Algorithm using in our scheme is proposed by
W.Meier and O.Staffelbach in EUROCRYPT-94. This Algorithm is
organized that only one LFSR and selection logic in order to generate
random stream. Thus it is optimized to implement the hardware logic
on devices with extremely limited resource, and the output generating
from SSG at each time do role as random stream so that it is allow our
to design the light-weight authentication scheme with security against
some network attacks. Therefore, we propose the novel tag
authentication scheme which use SSG to encrypt the Tag-ID
transmitted from tag to reader and achieve authentication of tag.
Abstract: The design of technological procedures for
manufacturing certain products demands the definition and
optimization of technological process parameters. Their
determination depends on the model of the process itself and its
complexity. Certain processes do not have an adequate mathematical
model, thus they are modeled using heuristic methods. First part of
this paper presents a state of the art of using soft computing
techniques in manufacturing processes from the perspective of
applicability in modern CAx systems. Methods of artificial
intelligence which can be used for this purpose are analyzed. The
second part of this paper shows some of the developed models of
certain processes, as well as their applicability in the actual
calculation of parameters of some technological processes within the
design system from the viewpoint of productivity.
Abstract: The proposed multiplexer-based novel 1-bit full
adder cell is schematized by using DSCH2 and its layout is generated
by using microwind VLSI CAD tool. The adder cell layout
interconnect analysis is performed by using BSIM4 layout analyzer.
The adder circuit is compared with other six existing adder circuits
for parametric analysis. The proposed adder cell gives better
performance than the other existing six adder circuits in terms of
power, propagation delay and PDP. The proposed adder circuit is
further analyzed for interconnect analysis, which gives better
performance than other adder circuits in terms of layout thickness,
width and height.
Abstract: In this paper, an efficient local appearance feature
extraction method based the multi-resolution Curvelet transform is
proposed in order to further enhance the performance of the well
known Linear Discriminant Analysis(LDA) method when applied
to face recognition. Each face is described by a subset of band
filtered images containing block-based Curvelet coefficients. These
coefficients characterize the face texture and a set of simple statistical
measures allows us to form compact and meaningful feature vectors.
The proposed method is compared with some related feature extraction
methods such as Principal component analysis (PCA), as well
as Linear Discriminant Analysis LDA, and independent component
Analysis (ICA). Two different muti-resolution transforms, Wavelet
(DWT) and Contourlet, were also compared against the Block Based
Curvelet-LDA algorithm. Experimental results on ORL, YALE and
FERET face databases convince us that the proposed method provides
a better representation of the class information and obtains much
higher recognition accuracies.
Abstract: In synchronized games players make their moves simultaneously
rather than alternately. Synchronized Triomineering
and Synchronized Tridomineering are respectively the synchronized
versions of Triomineering and Tridomineering, two variants of a
classic two-player combinatorial game called Domineering. Experimental
results for small m × n boards (with m + n ≤ 12 for
Synchronized Triomineering and m + n ≤ 10 for Synchronized
Tridomineering) and some theoretical results for general k×n boards
(with k = 3, 4, 5 for Synchronized Triomineering and k = 3
for Synchronized Tridomineering) are presented. Future research is
indicated.
Abstract: Abstract–The objectives of the current study are to determine the
prevalence, etiological agents, drug susceptibility pattern and plasmid
profile of Acinetobacter baumannii isolates from Hospital-Acquired
Infections (HAI) at Community Hospital, Al Jouf Province, Saudi
Arabia. A total of 1890 patients had developed infection during
hospital admission and were included in the study. Among those who
developed nosocomial infections, 15(9.4), 10(2.7) and 118 (12.7) had
respiratory tract infection (RTI), blood stream infections (BSI) and
urinary tract (UTI) respectively. A total of 268 bacterial isolates were
isolated from nosocomial infection. S. aureus was reported in 23.5%
for of the total isolates followed by Klebsiella pneumoniae (17.5%), E.
coli (17.2%), P. aeruginosa (11.9%), coagulase negative
staphylococcus (9%), A. baumannii (7.1%), Enterobacter spp.
(3.4%), Citrobacter freundii (3%), Proteus mirabilis (2.6%), and
Proteus vulgaris and Enterococcous faecalis (0.7%). Isolated
organisms are multi-drug resistant, predominantly Gram-positive
pathogens with a high incidence of methicillin-resistant S. aureus,
extended spectrum beta lactamase and vancomycin resistant
enterococci organisms. The RFLP (Fragment Length Polymorphisms)
patterns of plasmid preparations from isolated A. baumannii isolates
had altered RFLP patterns, possibly due to the presence of plasmid(s).
Five A. baumannii isolates harbored plasmids all of which were not
less than 2.71kbp in molecular weight. Hence, it showed that the gene
coding for the isolates were located on the plasmid DNA while the
remaining isolates which have no plasmid might showed gene coding
for antibiotic resistance being located on chromosomal DNA.
Nosocomial infections represent a current problem in Community
Hospital, Al Jouf Province, Saudi Arabia. Problems associated with
SSI include infection with multidrug resistant pathogens which are
difficult to treat and are associated with increased mortality.
Abstract: The pipe inspection operation is the difficult detective
performance. Almost applications are mainly relies on a manual
recognition of defective areas that have carried out detection by an
engineer. Therefore, an automation process task becomes a necessary
in order to avoid the cost incurred in such a manual process. An
automated monitoring method to obtain a complete picture of the
sewer condition is proposed in this work. The focus of the research is
the automated identification and classification of discontinuities in
the internal surface of the pipe. The methodology consists of several
processing stages including image segmentation into the potential
defect regions and geometrical characteristic features. Automatic
recognition and classification of pipe defects are carried out by means
of using an artificial neural network technique (ANN) based on
Radial Basic Function (RBF). Experiments in a realistic environment
have been conducted and results are presented.