Abstract: The rising growth of the GSM cellular phone industry has tightening competition level between providers in making strategies enhancing the market shares in Indonesia. Tsel, as one of those companies, has to determine the proper strategy to sustain as well as improve the market share without reducing its operational income level. Portfolio simulation model is designed with a dynamic system approach. The result of this research is a recommendation to the company by optimizing its technological policies, services, and promotions. The tariff policies and the signal quality should not be the main focus because this company has had a large number of customers and a good infrastructural condition.
Abstract: The bioassay-guided isolation and purification of an
ethyl acetate extract of Aspergillus terreus MC751 led to the
characterization of butyrolactone I as an antidiabetic and antioxidant.
The antidiabetic activity of butyrolactone I was evaluated by α-
glucosidase and α-amylase inhibition assays. Butyrolactone I
demonstrated significant concentration-dependent, mixed-type
inhibitory activity against yeast α-glucosidase with an IC50 of 54μM.
However, the compound exhibited less activity against rat intestinal
α-glucosidase and α-amylase. This is the first report on α-glucosidase
inhibitory activity of butyrolactone I. The antioxidative activity of
butyrolactone I was evaluated based on scavenging effects on 1,1-
diphenyl-2-picrylhydrazyl (DPPH) (IC50 =51 μM) and hydrogen
peroxide (IC50= 141 μM) radicals as well as a reducing power assay.
The results suggest that butyrolactone I is a promising antidiabetic as
well as antioxidant and should be considered for clinical trials.
Abstract: Void formation in underfill is considered as failure
in flip chip manufacturing process. Void formation possibly caused
by several factors such as poor soldering and flux residue during
die attach process, void entrapment due moisture contamination,
dispense pattern process and setting up the curing process. This
paper presents the comparison of single step and two steps curing
profile towards the void and black dots formation in underfill for
Hi-CTE Flip Chip Ceramic Ball Grid Array Package (FC-CBGA).
Statistic analysis was conducted to analyze how different factors
such as wafer lot, sawing technique, underfill fillet height and
curing profile recipe were affected the formation of voids and
black dots. A C-Mode Scanning Aqoustic Microscopy (C-SAM)
was used to scan the total count of voids and black dots. It was
shown that the 2 steps curing profile provided solution for void
elimination and black dots in underfill after curing process.
Abstract: In this paper a novel algorithm is proposed that integrates the process of fuzzy hierarchy generation and rule discovery for automated discovery of Production Rules with Fuzzy Hierarchy (PRFH) in large databases.A concept of frequency matrix (Freq) introduced to summarize large database that helps in minimizing the number of database accesses, identification and removal of irrelevant attribute values and weak classes during the fuzzy hierarchy generation.Experimental results have established the effectiveness of the proposed algorithm.
Abstract: Micro droplet formation is considered as a growing
emerging area of research due to its wide-range application in
chemistry as well as biology. The mechanism of micro droplet
formation using two immiscible liquids running through a T-junction
has been widely studied.
We believe that the flow of these two immiscible phases can be of
greater important factor that could have an impact on out-flow
hydrodynamic behavior, the droplets generated and the size of the
droplets. In this study, the type of the capillary tubes used also
represents another important factor that can have an impact on the
generation of micro droplets.
The tygon capillary tubing with hydrophilic inner surface doesn't
allow regular out-flows due to the fact that the continuous phase
doesn't adhere to the wall of the capillary inner surface.
Teflon capillary tubing, presents better wettability than tygon
tubing, and allows to obtain steady and regular regimes of out-flow,
and the micro droplets are homogeneoussize.
The size of the droplets is directly dependent on the flows of the
continuous and dispersed phases. Thus, as increasing the flow of the
continuous phase, to flow of the dispersed phase stationary, the size
of the drops decreases. Inversely, while increasing the flow of the
dispersed phase, to flow of the continuous phase stationary, the size
of the droplet increases.
Abstract: The most widely used semiconductor memory types
are the Dynamic Random Access Memory (DRAM) and Static
Random Access memory (SRAM). Competition among memory
manufacturers drives the need to decrease power consumption and
reduce the probability of read failure. A technology that is relatively
new and has not been explored is the FinFET technology. In this
paper, a single cell Schmitt Trigger Based Static RAM using FinFET
technology is proposed and analyzed. The accuracy of the result is
validated by means of HSPICE simulations with 32nm FinFET
technology and the results are then compared with 6T SRAM using
the same technology.
Abstract: As communications systems and technology become more advanced and complex, it will be increasingly important to focus on users- individual needs. Personalization and effective user profile management will be necessary to ensure the uptake and success of new services and devices and it is therefore important to focus on the users- requirements in this area and define solutions that meet these requirements. The work on personalization and user profiles emerged from earlier ETSI work on a Universal Communications Identifier (UCI) which is a unique identifier of the user rather than a range of identifiers of the many of communication devices or services (e.g. numbers of fixed phone at home/work, mobile phones, fax and email addresses). This paper describes work on personalization including standardized information and preferences and an architectural framework providing a description of how personalization can be integrated in Next Generation Networks, together with the UCI concept.
Abstract: These days we face with so many advertisements in
magazines, those mentioned coaching is pragmatic specialties which
help people make change in their lives. Up to know Specialty coaches
are not necessarily therapists, consultants or psychologist, thus they
may not know psychological theories. The International Coach
Federation identifies "facilitating learning and results" as one of its
four core coach competencies, without understanding learning
theories coaching practice hangs in theoretical abyss. Thus the aim of
this article is investigating learning theories within coaching process.
Therefore, I reviewed some cognitive and behavioral learning
theories and analyzed their contribution with coaching process which
has been introduced in mentor coaches and ICF certified coaches'
papers and books. The result demonstrated that coaching profession
is strongly grounded in learning theories, and it will be strengthened
by the validation of theories and evidence-based research as we move
forward. Thus, it needs more research in order to applying effective
theoretical frameworks.
Abstract: In this paper a nonlinear model is presented to
demonstrate the relation between production and marketing
departments. By introducing some functions such as pricing cost and
market share loss functions it will be tried to show some aspects of
market modelling which has not been regarded before. The proposed
model will be a constrained signomial geometric programming
model. For model solving, after variables- modifications an iterative
technique based on the concept of geometric mean will be introduced
to solve the resulting non-standard posynomial model which can be
applied to a wide variety of models in non-standard posynomial
geometric programming form. At the end a numerical analysis will
be presented to accredit the validity of the mentioned model.
Abstract: Existing experiences indicate that one of the most
prominent reasons that some ERP implementations fail is related to
selecting an improper ERP package. Among those important factors
resulting in inappropriate ERP selections, one is to ignore preliminary
activities that should be done before the evaluation of ERP packages.
Another factor yielding these unsuitable selections is that usually
organizations employ prolonged and costly selection processes in
such extent that sometimes the process would never be finalized
or sometimes the evaluation team might perform many key final
activities in an incomplete or inaccurate way due to exhaustion, lack
of interest or out-of-date data. In this paper, a systematic approach
that recommends some activities to be done before and after the
main selection phase is introduced for choosing an ERP package. On
the other hand, the proposed approach has utilized some ideas that
accelerates the selection process at the same time that reduces the
probability of an erroneous final selection.
Abstract: A new method for low complexity image coding is presented, that permits different settings and great scalability in the generation of the final bit stream. This coding presents a continuoustone still image compression system that groups loss and lossless compression making use of finite arithmetic reversible transforms. Both transformation in the space of color and wavelet transformation are reversible. The transformed coefficients are coded by means of a coding system in depending on a subdivision into smaller components (CFDS) similar to the bit importance codification. The subcomponents so obtained are reordered by means of a highly configure alignment system depending on the application that makes possible the re-configure of the elements of the image and obtaining different levels of importance from which the bit stream will be generated. The subcomponents of each level of importance are coded using a variable length entropy coding system (VBLm) that permits the generation of an embedded bit stream. This bit stream supposes itself a bit stream that codes a compressed still image. However, the use of a packing system on the bit stream after the VBLm allows the realization of a final highly scalable bit stream from a basic image level and one or several enhance levels.
Abstract: When designing information systems that deal with
large amount of domain knowledge, system designers need to consider
ambiguities of labeling termsin domain vocabulary for navigating
users in the information space. The goal of this study is to develop a
methodology for system designers to label navigation items, taking
account of ambiguities stems from synonyms or polysemes of labeling
terms. In this paper, we propose a method for concept labeling based
on mappings between domain ontology andthesaurus, and report
results of an empirical evaluation.
Abstract: We present a dextran modified silicon microring
resonator sensor for high density antibody immobilization. An array
of sensors consisting of three sensor rings and a reference ring was
fabricated and its surface sensitivity and the limit of detection were
obtained using polyelectrolyte multilayers. The mass sensitivity and
the limit of detection of the fabricated sensor ring are 0.35 nm/ng
mm-2 and 42.8 pg/mm2 in air, respectively. Dextran modified sensor
surface was successfully prepared by covalent grafting of oxidized
dextran on 3-aminopropyltriethoxysilane (APTES) modified silicon
sensor surface. The antibody immobilization on hydrogel dextran
matrix improves 40% compared to traditional antibody
immobilization method via APTES and glutaraldehyde linkage.
Abstract: This paper presents a vocoder to obtain high quality synthetic speech at 600 bps. To reduce the bit rate, the algorithm is based on a sinusoidally excited linear prediction model which extracts few coding parameters, and three consecutive frames are grouped into a superframe and jointly vector quantization is used to obtain high coding efficiency. The inter-frame redundancy is exploited with distinct quantization schemes for different unvoiced/voiced frame combinations in the superframe. Experimental results show that the quality of the proposed coder is better than that of 2.4kbps LPC10e and achieves approximately the same as that of 2.4kbps MELP and with high robustness.
Abstract: Clustering techniques have been used by many intelligent software agents to group similar access patterns of the Web users into high level themes which express users intentions and interests. However, such techniques have been mostly focusing on one salient feature of the Web document visited by the user, namely the extracted keywords. The major aim of these techniques is to come up with an optimal threshold for the number of keywords needed to produce more focused themes. In this paper we focus on both keyword and similarity thresholds to generate themes with concentrated themes, and hence build a more sound model of the user behavior. The purpose of this paper is two fold: use distance based clustering methods to recognize overall themes from the Proxy log file, and suggest an efficient cut off levels for the keyword and similarity thresholds which tend to produce more optimal clusters with better focus and efficient size.
Abstract: In this paper, collocation based cubic B-spline and
extended cubic uniform B-spline method are considered for
solving one-dimensional heat equation with a nonlocal initial
condition. Finite difference and θ-weighted scheme is used for
time and space discretization respectively. The stability of the
method is analyzed by the Von Neumann method. Accuracy of
the methods is illustrated with an example. The numerical results
are obtained and compared with the analytical solutions.
Abstract: In this paper flow around two cam shaped cylinders had been studied numerically. The equivalent diameter of cylinders is 27.6 mm. The space between center to center of two cam shaped cylinders is define as longitudinal pitch ratio and it varies in range of
2 varies in range of 50
Abstract: With constraints on data availability and for study of power system stability it is adequate to model the synchronous generator with field circuit and one equivalent damper on q-axis known as the model 1.1. This paper presents a systematic procedure for modelling and simulation of a single-machine infinite-bus power system installed with a thyristor controlled series compensator (TCSC) where the synchronous generator is represented by model 1.1, so that impact of TCSC on power system stability can be more reasonably evaluated. The model of the example power system is developed using MATLAB/SIMULINK which can be can be used for teaching the power system stability phenomena, and also for research works especially to develop generator controllers using advanced technologies. Further, the parameters of the TCSC controller are optimized using genetic algorithm. The non-linear simulation results are presented to validate the effectiveness of the proposed approach.
Abstract: This paper presents the identification of the impact
force acting on a simply supported beam. The force identification is
an inverse problem in which the measured response of the structure is
used to determine the applied force. The identification problem is
formulated as an optimization problem and the genetic algorithm is
utilized to solve the optimization problem. The objective function is
calculated on the difference between analytical and measured
responses and the decision variables are the location and magnitude
of the applied force. The results from simulation show the
effectiveness of the approach and its robustness vs. the measurement
noise and sensor location.
Abstract: Despite the extensive use of eLearning systems, there
is no consensus on a standard framework for evaluating this kind of
quality system. Hence, there is only a minimum set of tools that can
supervise this judgment and gives information about the course
content value. This paper presents two kinds of quality set evaluation
indicators for eLearning courses based on the computational process
of three known metrics, the Euclidian, Hamming and Levenshtein
distances. The “distance" calculus is applied to standard evaluation
templates (i.e. the European Commission Programme procedures vs.
the AFNOR Z 76-001 Standard), determining a reference point in the
evaluation of the e-learning course quality vs. the optimal concept(s).
The case study, based on the results of project(s) developed in the
framework of the European Programme “Leonardo da Vinci", with
Romanian contractors, try to put into evidence the benefits of such a
method.