Abstract: One of the major challenges in the Information
Retrieval field is handling the massive amount of information
available to Internet users. Existing ranking techniques and strategies
that govern the retrieval process fall short of expected accuracy.
Often relevant documents are buried deep in the list of documents
returned by the search engine. In order to improve retrieval accuracy
we examine the issue of language effect on the retrieval process.
Then, we propose a solution for a more biased, user-centric relevance
for retrieved data. The results demonstrate that using indices based
on variations of the same language enhances the accuracy of search
engines for individual users.
Abstract: Logic based methods for learning from structured data
is limited w.r.t. handling large search spaces, preventing large-sized
substructures from being considered by the resulting classifiers. A
novel approach to learning from structured data is introduced that
employs a structure transformation method, called finger printing, for
addressing these limitations. The method, which generates features
corresponding to arbitrarily complex substructures, is implemented in
a system, called DIFFER. The method is demonstrated to perform
comparably to an existing state-of-art method on some benchmark
data sets without requiring restrictions on the search space.
Furthermore, learning from the union of features generated by finger
printing and the previous method outperforms learning from each
individual set of features on all benchmark data sets, demonstrating
the benefit of developing complementary, rather than competing,
methods for structure classification.
Abstract: The roll center is one of the key parameters for designing a suspension. Several driving characteristics are affected significantly by the migration of the roll center during the suspension-s motion. The strut/SLA (strut/short-long-arm) suspension, which is widely used in production cars, combines the space-saving characteristics of a MacPherson strut suspension with some of the preferred handling characteristics of an SLA suspension. In this study, a front strut/SLA suspension is modeled by ADAMS/Car software. Kinematic roll analysis is then employed to investigate how the rolling characteristics change under the wheel travel and steering input. The related parameters, including the roll center height, roll camber gain, toe change, scrub radius and wheel track width change, are analyzed and discussed. It is found that the strut/SLA suspension clearly has a higher roll center than strut and SLA suspensions do. The variations in the roll center height under roll analysis are very different as the wheel travel displacement and steering angle are added. The results of the roll camber gain, scrub radius and wheel track width change are considered satisfactory. However, the toe change is too large and needs fine-tuning through a sensitivity analysis.
Abstract: The purpose of the present study was to evaluate the
epidemiology of waterborne diarrhoeal among children aged 6-36
months old in Busia town, western Kenya. The study was carried out
between Feb. 2008 and Feb. 2010. Cases of diarrhoea reported in 385
households were linked to household water handling practices. A
mother with a child of 6-36 months old was also included in the
study. Diarrhoea prevalence among children 6-36 months was 16.7%
in Busia town, Bwamani (19.6%) and Mayenje (10.6%) clustered in
Mayenje sub-location reported the highest and the lowest prevalence
of diarrhoea. There was a positive correlation between the prevalence
of diarrhoea in children and the level of the mother-s education,
29.9% (n= 100). Diarrhoea cases decreased in range from 35.5% (n
=102) to 4.8% (n= 16), corresponding to increase in age from 6-35
months on average. In conclusion, prevalence of diarrhoea in
children of 6-36 months old was 16.7% in Busia town. This was
higher in children whose mother-s age was below 18 years and with
low level of education, the rate decreased with increase in age of
children. Prevalence of diarrhoea in children aged 6-36months in
households was higher in children aged 6-17 and 36 months and
whose mothers were less educated and fell between the ages of 18-24
years. The Influence of human activities at the main source of
drinking water on the prevalence of diarrhoea in these children was
insignificant.
Abstract: This research presents the development of simulation
modeling for WIP management in semiconductor fabrication.
Manufacturing simulation modeling is needed for productivity
optimization analysis due to the complex process flows involved
more than 35 percent re-entrance processing steps more than 15 times
at same equipment. Furthermore, semiconductor fabrication required
to produce high product mixed with total processing steps varies from
300 to 800 steps and cycle time between 30 to 70 days. Besides the
complexity, expansive wafer cost that potentially impact the
company profits margin once miss due date is another motivation to
explore options to experiment any analysis using simulation
modeling. In this paper, the simulation model is developed using
existing commercial software platform AutoSched AP, with
customized integration with Manufacturing Execution Systems
(MES) and Advanced Productivity Family (APF) for data collections
used to configure the model parameters and data source. Model
parameters such as processing steps cycle time, equipment
performance, handling time, efficiency of operator are collected
through this customization. Once the parameters are validated, few
customizations are made to ensure the prior model is executed. The
accuracy for the simulation model is validated with the actual output
per day for all equipments. The comparison analysis from result of
the simulation model compared to actual for achieved 95 percent
accuracy for 30 days. This model later was used to perform various
what if analysis to understand impacts on cycle time and overall
output. By using this simulation model, complex manufacturing
environment like semiconductor fabrication (fab) now have
alternative source of validation for any new requirements impact
analysis.
Abstract: Many natural language expressions are ambiguous, and
need to draw on other sources of information to be interpreted.
Interpretation of the e word تعاون to be considered as a noun or a verb
depends on the presence of contextual cues. To interpret words we
need to be able to discriminate between different usages. This paper
proposes a hybrid of based- rules and a machine learning method for
tagging Arabic words. The particularity of Arabic word that may be
composed of stem, plus affixes and clitics, a small number of rules
dominate the performance (affixes include inflexional markers for
tense, gender and number/ clitics include some prepositions,
conjunctions and others). Tagging is closely related to the notion of
word class used in syntax. This method is based firstly on rules (that
considered the post-position, ending of a word, and patterns), and
then the anomaly are corrected by adopting a memory-based learning
method (MBL). The memory_based learning is an efficient method to
integrate various sources of information, and handling exceptional
data in natural language processing tasks. Secondly checking the
exceptional cases of rules and more information is made available to
the learner for treating those exceptional cases. To evaluate the
proposed method a number of experiments has been run, and in
order, to improve the importance of the various information in
learning.
Abstract: Data clustering is an important data exploration technique
with many applications in data mining. We present an enhanced
version of the well known single link clustering algorithm. We will
refer to this algorithm as DCBOR. The proposed algorithm alleviates
the chain effect by removing the outliers from the given dataset.
So this algorithm provides outlier detection and data clustering
simultaneously. This algorithm does not need to update the distance
matrix, since the algorithm depends on merging the most k-nearest
objects in one step and the cluster continues grow as long as possible
under specified condition. So the algorithm consists of two phases;
at the first phase, it removes the outliers from the input dataset. At
the second phase, it performs the clustering process. This algorithm
discovers clusters of different shapes, sizes, densities and requires
only one input parameter; this parameter represents a threshold for
outlier points. The value of the input parameter is ranging from 0 to
1. The algorithm supports the user in determining an appropriate
value for it. We have tested this algorithm on different datasets
contain outlier and connecting clusters by chain of density points,
and the algorithm discovers the correct clusters. The results of
our experiments demonstrate the effectiveness and the efficiency of
DCBOR.
Abstract: When designing satellites, one of the major issues aside for designing its primary subsystems is to devise its thermal. The thermal management of satellites requires solving different sets of issues with regards to modelling. If the satellite is well conditioned all other parts of the satellite will have higher temperature no matter what. The main issue of thermal modelling for satellite design is really making sure that all the other points of the satellite will be within the temperature limits they are designed. The insertion of power electronics in aerospace technologies is becoming widespread and the modern electronic systems used in space must be reliable and efficient with thermal management unaffected by outer space constraints. Many advanced thermal management techniques have been developed in recent years that have application in high power electronic systems. This paper presents a Three-Dimensional Modal Transmission Line Matrix (3D-TLM) implementation of transient heat flow in space power electronics. In such kind of components heat dissipation and good thermal management are essential. Simulation provides the cheapest tool to investigate all aspects of power handling. The 3DTLM has been successful in modeling heat diffusion problems and has proven to be efficient in terms of stability and complex geometry. The results show a three-dimensional visualisation of self-heating phenomena in the device affected by outer space constraints, and will presents possible approaches for increasing the heat dissipation capability of the power modules.
Abstract: The accuracy of estimated stability and control
derivatives of a light aircraft from flight test data were evaluated. The light aircraft, named ChangGong-91, is the first certified aircraft from
the Korean government. The output error method, which is a maximum likelihood estimation technique and considers measurement
noise only, was used to analyze the aircraft responses measures. The
multi-step control inputs were applied in order to excite the short period mode for the longitudinal and Dutch-roll mode for the lateral-directional motion. The estimated stability/control derivatives of Chan Gong-91 were analyzed for the assessment of handling
qualities comparing them with those of similar aircraft. The accuracy of the flight derivative estimates derived from flight test measurement
was examined in engineering judgment, scatter and Cramer-Rao bound, which turned out to be satisfactory with minor defects..
Abstract: Today, the central role of industrial robots in automation in general and in material handling in particular is crystal clear. Based on the current status of Photovoltaics and by focusing on lightweight material handling, PV industry has turned into a potential candidate for introducing a fresh “pick and place" robot technology. Thus, to examine the industry needs in this regard, firstly the best suited applications for such robotic automation,and then the essential prerequisites in PV industry should be identified. The objective of this paper is to present holistic views on the industry trends, general automation status and existing challenges facing lightweight robotic material handling in PV Silicon Wafer and Thin Film technologies. The results of this study show that currently no uniform pick and place solution prevails among PV Silicon Wafer manufacturers and the industry calls for a new robot solution to satisfy its needs in new directions.
Abstract: In recent years demolished concrete waste handling and management is the new primary challenging issue faced by the countries all over the world. It is very challenging and hectic problem that has to be tackled in an indigenous manner, it is desirable to completely recycle demolished concrete waste in order to protect natural resources and reduce environmental pollution. In this research paper an experimental study is carried out to investigate the feasibility and recycling of demolished waste concrete for new construction. The present investigation to be focused on recycling demolished waste materials in order to reduce construction cost and resolving housing problems faced by the low income communities of the world. The crushed demolished concrete wastes is segregated by sieving to obtain required sizes of aggregate, several tests were conducted to determine the aggregate properties before recycling it into new concrete. This research shows that the recycled aggregate that are obtained from site make good quality concrete. The compressive strength test results of partial replacement and full recycled aggregate concrete and are found to be higher than the compressive strength of normal concrete with new aggregate.
Abstract: In general, small-scale vegetables farmers experience
problems in improving the safety and quality of vegetables supplied
to high-class consumers in modern retailers. They also lack of
information to access market. The farmers group and/or cooperative
(FGC) should be able to assist its members by providing training in
handling and packing vegetables and enhancing marketing
capabilities to sell commodities to the modern retailers. This study
proposes an agri-food supply chain (ASC) model that involves the
corporate social responsibility (CSR) activities to cultivate the
capabilities of farmers to access market. Multi period ASC model is
formulated as Weighted Goal Programming (WGP) to analyze the
impacts of CSR programs to empower the FGCs in managing the
small-scale vegetables farmers. The results show that the proposed
model can be used to determine the priority of programs in order to
maximize the four goals to be achieved in the CSR programs.
Abstract: Applied a mouse-s roller with a gripper to increase the
efficiency for a gripper can learn to a material handling without
slipping. To apply a gripper, we use the optimize principle to develop
material handling by use a signal for checking a roller mouse that
rotate or not. In case of the roller rotates means that the material slips.
A gripper will slide to material handling until the roller will not
rotate. As this experiment has test material handling for comparing a
grip force that uses to material handling of the 10-human with the
applied gripper. We can summarize that human exert the material
handling more than the applied gripper. Because of the gripper can
exert more befit to material handling than human and may be a
minimum force to lift a material without slipping.
Abstract: The eco-efficient use of “waste" makes sense from
economic, social, and environmental perspectives. By efficiency diverting “waste" products back into useful and/or profitable inputs,
industries and entire societies can reap the benefits of improved financial profit, decreased environmental degradation, and overall
well-being of humanity.
In this project, several material flows at
Company Limited were investigated. Principles of "industrial ecology" were applied to improve the management of waste rubbers that are used in the jewelry manufacturing process. complete this project, a brief engineering analysis stream, and investigated eco-efficient principles for more efficient
handling of the materials and wastes were conducted, and the result were used to propose implementation strategies.
Abstract: Future space vehicles will require the use of non-toxic, cryogenic propellants, because of the performance advantages over the toxic hypergolic propellants and also because of the environmental and handling concerns. A prototypical capillary flow liquid acquisition device (LAD) for cryogenic propellants was fabricated with a mesh screen, covering a rectangular flow channel with a cylindrical outlet tube, and was tested with liquid oxygen (LOX). In order to better understand the performance in various gravity environments and orientations with different submersion depths of the LAD, a series of computational fluid dynamics (CFD) simulations of LOX flow through the LAD screen channel, including horizontally and vertically submersions of the LAD channel assembly at normal gravity environment was conducted. Gravity effects on the flow field in LAD channel are inspected and analyzed through comparing the simulations.
Abstract: In this work, I present a review on Sparse Distributed
Memory for Small Cues (SDMSCue), a variant of Sparse Distributed
Memory (SDM) that is capable of handling small cues. I then conduct
and show some cognitive experiments on SDMSCue to test its
cognitive soundness compared to SDM. Small cues refer to input
cues that are presented to memory for reading associations; but have
many missing parts or fields from them. The original SDM failed to
handle such a problem. SDMSCue handles and overcomes this
pitfall. The main idea in SDMSCue; is the repeated projection of the
semantic space on smaller subspaces; that are selected based on the
input cue length and pattern. This process allows for Read/Write
operations using an input cue that is missing a large portion.
SDMSCue is augmented with the use of genetic algorithms for
memory allocation and initialization. I claim that SDM functionality
is a subset of SDMSCue functionality.
Abstract: The goal of this paper is to develop a model to
integrate “pricing" and “advertisement" for short life cycle products,
such as branded fashion clothing products. To achieve this goal, we
apply the concept of “Dynamic Pricing". There are two classes of
advertisements, for the brand (regardless of product) and for a
particular product. Advertising the brand affects the demand and
price of all the products. Thus, the model considers all these products
in relation with each other. We develop two different methods to
integrate both types of advertisement and pricing. The first model is
developed within the framework of dynamic programming. However,
due to the complexity of the model, this method cannot be applicable
for large size problems. Therefore, we develop another method,
called hieratical approach, which is capable of handling the real
world problems. Finally, we show the accuracy of this method, both
theoretically and also by simulation.
Abstract: Querying a data source and routing data towards sink
becomes a serious challenge in static wireless sensor networks if sink
and/or data source are mobile. Many a times the event to be observed
either moves or spreads across wide area making maintenance of
continuous path between source and sink a challenge. Also, sink can
move while query is being issued or data is on its way towards sink.
In this paper, we extend our already proposed Grid Based Data
Dissemination (GBDD) scheme which is a virtual grid based
topology management scheme restricting impact of movement of
sink(s) and event(s) to some specific cells of a grid. This obviates the
need for frequent path modifications and hence maintains continuous
flow of data while minimizing the network energy consumptions.
Simulation experiments show significant improvements in network
energy savings and average packet delay for a packet to reach at sink.
Abstract: In rapidly changing market environment, firms are investing a lot of time and resources into new product development (NPD) projects to make profit and to obtain competitive advantage. However, failure rate of NPD projects is becoming high due to various internal and external risks which hinder successful NPD projects. To reduce the failure rate, it is critical that risks have to be managed effectively and efficiently through good strategy, and treated by optimal responses to minimize risk cost. Four strategies are adopted to handle the risks in this study. The optimal responses are characterized by high reduction of risk costs with high efficiency. This study suggests a framework to decide the optimal responses considering the core risks, risk costs, response efficiency and response costs for successful NPD projects. Both binary particles warm optimization (BPSO) and multi-objective particle swarm optimization (MOPSO) methods are mainly used in the framework. Although several limitations exist in use for real industries, the frame work shows good strength for handling the risks with highly scientific ways through an example.
Abstract: In this paper, He-s homotopy perturbation method (HPM) is applied to spatial one and three spatial dimensional inhomogeneous wave equation Cauchy problems for obtaining exact solutions. HPM is used for analytic handling of these equations. The results reveal that the HPM is a very effective, convenient and quite accurate to such types of partial differential equations (PDEs).