Abstract: Performance appraisal of employee is important in
managing the human resource of an organization. With the change
towards knowledge-based capitalism, maintaining talented
knowledge workers is critical. However, management classification
of “outstanding", “poor" and “average" performance may not be an
easy decision. Besides that, superior might also tend to judge the
work performance of their subordinates informally and arbitrarily
especially without the existence of a system of appraisal. In this
paper, we propose a performance appraisal system using
multifactorial evaluation model in dealing with appraisal grades
which are often express vaguely in linguistic terms. The proposed
model is for evaluating staff performance based on specific
performance appraisal criteria. The project was collaboration with
one of the Information and Communication Technology company in
Malaysia with reference to its performance appraisal process.
Abstract: In a BFWA (Broadband Fixed Wireless Access Network) the evolved SINR (Signal to Interference plus Noise Ratio) is relevant influenced by the applied duplex method. The TDD (Time Division Duplex), especially adaptive TDD method has some advantage contrary to FDD (Frequency Division Duplex), for example the spectrum efficiency and flexibility. However these methods are suffering several new interference situations that can-t occur in a FDD system. This leads to reduced SINR in the covered area what could cause some connection outages. Therefore, countermeasure techniques against interference are necessary to apply in TDD systems. Synchronization is one way to handling the interference. In this paper the TDD systems – applying different system synchronization degree - will be compared by the evolved SINR at different locations of the BFWA service area and the percentage of the covered area by the system.
Abstract: The main problems of data centric and open source
project are large number of developers and changes of core
framework. Model-View-Control (MVC) design pattern significantly
improved the development and adjustments of complex projects.
Entity framework as a Model layer in MVC architecture has
simplified communication with the database. How often are the new
technologies used and whether they have potentials for designing
more efficient Enterprise Resource Planning (ERP) system that will
be more suited to accountants?
Abstract: This paper studies dynamic stability of homogeneous
beams with piezoelectric layers subjected to periodic axial
compressive load that is simply supported at both ends lies on a
continuous elastic foundation. The displacement field of beam is
assumed based on Bernoulli-Euler beam theory. Applying the
Hamilton's principle, the governing dynamic equation is established.
The influences of applied voltage, foundation coefficient and
piezoelectric thickness on the unstable regions are presented. To
investigate the accuracy of the present analysis, a compression study
is carried out with a known data.
Abstract: The right information at the right time influences the
enterprise and technical success. Sharing knowledge among members
of a big organization may be a complex activity. And as long as the
knowledge is not shared, can not be exploited by the organization.
There are some mechanisms which can originate knowledge sharing.
It is intended, in this paper, to trigger these mechanisms by using
semantic nets. Moreover, the intersection and overlapping of terms
and sub-terms, as well as their relationships will be described through
the mereology science for the whole knowledge sharing system. It is
proposed a knowledge system to supply to operators with the right
information about a specific process and possible risks, e.g. at the
assembly process, at the right time in an automated manufacturing
environment, such as at the automotive industry.
Abstract: Yield and Crop Water Productivity are crucial issues
in sustainable agriculture, especially in high-demand resource crops such as sweet corn. This study was conducted to investigate
agronomic responses such as plant growth, yield and soil parameters (EC and Nitrate accumulation) to several deficit irrigation treatments
(100, 75, 50, 25 and 0% of ETm) applied during vegetative growth
stage, rainfed treatment was also tested.
The finding of this research indicates that under deficit irrigation
during vegetative growth stage applying 75% of ETm lead to increasing of 19.4% in terms of fresh ear yield, 9.4% in terms of dry grain yield, 10.5% in terms of number of ears per plant, 11.5% for
the 1000 grains weight and 19% in terms of crop water productivity compared with fully irrigated treatment. While those parameters in
addition to root, shoot and plant height has been affected by deficit
irrigation during vegetative growth stage when increasing water stress degree more than 50% of ETm.
Abstract: The goal of data mining algorithms is to discover
useful information embedded in large databases. One of the most
important data mining problems is discovery of frequently occurring
patterns in sequential data. In a multidimensional sequence each
event depends on more than one dimension. The search space is quite
large and the serial algorithms are not scalable for very large
datasets. To address this, it is necessary to study scalable parallel
implementations of sequence mining algorithms.
In this paper, we present a model for multidimensional sequence
and describe a parallel algorithm based on data parallelism.
Simulation experiments show good load balancing and scalable and
acceptable speedup over different processors and problem sizes and
demonstrate that our approach can works efficiently in a real parallel
computing environment.
Abstract: According to the masonry standard the compressive
strength is basically dependent on factors such as the mortar strength
and the relative values of unit and mortar strength. However
interlocking brick has none or less use of mortar. Therefore there is a need to investigate the behavior of masonry walls using interlocking
bricks. In this study a series of tests have been conducted; physical
properties and compressive strength of brick units and masonry walls
were constructed from interlocking bricks and tested under constant
vertical load at different eccentricities. The purpose of the
experimental investigations is to obtain the force displacement curves, analyze the behavior of masonry walls. The results showed
that the brick is categorized as common brick (BS 3921:1985) and severe weathering grade (ASTM C62). The maximum compressive stress of interlocking brick wall is 3.6 N/mm2 and fulfilled the requirement of standard for residential building.
Abstract: Chatter vibration has been a troublesome problem for a
machine tool toward the high precision and high speed machining.
Essentially, the machining performance is determined by the dynamic
characteristics of the machine tool structure and dynamics of cutting
process. Therefore the dynamic vibration behavior of spindle tool
system greatly determines the performance of machine tool. The
purpose of this study is to investigate the influences of the machine
frame structure on the dynamic frequency of spindle tool unit through
finite element modeling approach. To this end, a realistic finite
element model of the vertical milling system was created by
incorporated the spindle-bearing model into the spindle head stock of
the machine frame. Using this model, the dynamic characteristics of
the milling machines with different structural designs of spindle head
stock and identical spindle tool unit were demonstrated. The results of
the finite element modeling reveal that the spindle tool unit behaves
more compliant when the excited frequency approaches the natural
mode of the spindle tool; while the spindle tool show a higher dynamic
stiffness at lower frequency that may be initiated by the structural
mode of milling head. Under this condition, it is concluded that the
structural configuration of spindle head stock associated with the
vertical column of milling machine plays an important role in
determining the machining dynamics of the spindle unit.
Abstract: In this paper a new approach for transmission pricing
is presented. The main idea is voltage angle allocation, i.e.
determining the contribution of each contract on the voltage angle of
each bus. DC power flow is used to compute a primary solution for
angle decomposition. To consider the impacts of system non-linearity
on angle decomposition, the primary solution is corrected in different
iterations of decoupled Newton-Raphson power flow. Then, the
contribution of each contract on power flow of each transmission line
is computed based on angle decomposition. Contract-related flows
are used as a measure for “extent of use" of transmission network
capacity and consequently transmission pricing. The presented
approach is applied to a 4-bus test system and IEEE 30-bus test
system.
Abstract: The Economic factors are leading to the rise of
infrastructures provides software and computing facilities as a
service, known as cloud services or cloud computing. Cloud services
can provide efficiencies for application providers, both by limiting
up-front capital expenses, and by reducing the cost of ownership over
time. Such services are made available in a data center, using shared
commodity hardware for computation and storage. There is a varied
set of cloud services available today, including application services
(salesforce.com), storage services (Amazon S3), compute services
(Google App Engine, Amazon EC2) and data services (Amazon
SimpleDB, Microsoft SQL Server Data Services, Google-s Data
store). These services represent a variety of reformations of data
management architectures, and more are on the horizon.
Abstract: Air bending is one of the important metal forming
processes, because of its simplicity and large field application.
Accuracy of analytical and empirical models reported for the analysis
of bending processes is governed by simplifying assumption and do
not consider the effect of dynamic parameters. Number of researches
is reported on the finite element analysis (FEA) of V-bending, Ubending,
and air V-bending processes. FEA of bending is found to be
very sensitive to many physical and numerical parameters. FE
models must be computationally efficient for practical use. Reported
work shows the 3D FEA of air bending process using Hyperform LSDYNA
and its comparison with, published 3D FEA results of air
bending in Ansys LS-DYNA and experimental results. Observing the
planer symmetry and based on the assumption of plane strain
condition, air bending problem was modeled in 2D with symmetric
boundary condition in width. Stress-strain results of 2D FEA were
compared with 3D FEA results and experiments. Simplification of
air bending problem from 3D to 2D resulted into tremendous
reduction in the solution time with only marginal effect on stressstrain
results. FE model simplification by studying the problem
symmetry is more efficient and practical approach for solution of
more complex large dimensions slow forming processes.
Abstract: Data Structures and Algorithms is a module in most
Computer Science or Information Technology curricula. It is one of
the modules most students identify as being difficult. This paper
demonstrates how programming a solution for Sudoku can make
abstract concepts more concrete. The paper relates concepts of a
typical Data Structures and Algorithms module to a step by step
solution for Sudoku in a human type as opposed to a computer
oriented solution.
Abstract: Background noise is particularly damaging to speech
intelligibility for people with hearing loss especially for sensorineural
loss patients. Several investigations on speech intelligibility have
demonstrated sensorineural loss patients need 5-15 dB higher SNR
than the normal hearing subjects. This paper describes Discrete
Cosine Transform Power Normalized Least Mean Square algorithm
to improve the SNR and to reduce the convergence rate of the LMS
for Sensory neural loss patients. Since it requires only real arithmetic,
it establishes the faster convergence rate as compare to time domain
LMS and also this transformation improves the eigenvalue
distribution of the input autocorrelation matrix of the LMS filter.
The DCT has good ortho-normal, separable, and energy compaction
property. Although the DCT does not separate frequencies, it is a
powerful signal decorrelator. It is a real valued function and thus
can be effectively used in real-time operation. The advantages of
DCT-LMS as compared to standard LMS algorithm are shown via
SNR and eigenvalue ratio computations. . Exploiting the symmetry
of the basis functions, the DCT transform matrix [AN] can be
factored into a series of ±1 butterflies and rotation angles. This
factorization results in one of the fastest DCT implementation. There
are different ways to obtain factorizations. This work uses the fast
factored DCT algorithm developed by Chen and company. The
computer simulations results show superior convergence
characteristics of the proposed algorithm by improving the SNR at
least 10 dB for input SNR less than and equal to 0 dB, faster
convergence speed and better time and frequency characteristics.
Abstract: Stirred tanks have applications in many chemical
processes where mixing is important for the overall performance of
the system. In present work 5%v of the tank is filled by solid particles
with diameter of 700 m that Rushton Turbine and Propeller impeller
is used for stirring. An Eulerian-Eulerian Multi Fluid Model coupled
and for modeling rotating of impeller, moving reference frame
(MRF) technique was used and standard-k- model was selected for
turbulency. Flow field, radial velocity and axial distribution of solid
for both of impellers was investigation and comparison. Comparisons
of simulation results between Rushton Turbine and propeller impeller
shows that final quality of solid-liquid slurry in different rotating
speed for propeller impeller is better than the Rushton Turbine.
Abstract: Copper sulfide nanoparticles (CuS) were successfully synthesized by the pulsed plasma in liquid method, using two copper rod electrodes submerged in molten sulfur. Low electrical energy and no high temperature were applied for synthesis. Obtained CuS nanoparticles were then analyzed by means of X-ray diffraction, Low and High Resolution Transmission Electron Microscopy, Electron Diffraction, X-ray Photoelectron, Raman Spectroscopies and Field Emission Scanning Electron Microscopy. XRD analysis revealed peaks for CuS with hexagonal phase composition. TEM and HRTEM studies showed that sizes of CuS nanoparticles ranged between 10-60 nm, with the average size of about 20 nm. Copper sulfide nanoparticles have short nanorod-like structure. Raman spectroscopy found peak for CuS at 474.2cm-1of Raman region.
Abstract: The Programmable Logic Controller (PLC) plays a
vital role in automation and process control. Grafcet is used for
representing the control logic, and traditional programming
languages are used for describing the pure algorithms. Grafcet is used
for dividing the process to be automated in elementary sequences that
can be easily implemented. Each sequence represent a step that has
associated actions programmed using textual or graphical languages
after case. The programming task is simplified by using a set of
subroutines that are used in several steps. The paper presents an
example of implementation for a punching machine for sheets and
plates. The use the graphical languages the programming of a
complex sequential process is a necessary solution. The state of
Grafcet can be used for debugging and malfunction determination.
The use of the method combined with a set of knowledge acquisition
for process application reduces the downtime of the machine and
improve the productivity.
Abstract: In the era of great competition, understanding and satisfying
customers- requirements are the critical tasks for a company
to make a profits. Customer relationship management (CRM) thus
becomes an important business issue at present. With the help of
the data mining techniques, the manager can explore and analyze
from a large quantity of data to discover meaningful patterns and
rules. Among all methods, well-known association rule is most
commonly seen. This paper is based on Apriori algorithm and uses
genetic algorithms combining a data mining method to discover fuzzy
classification rules. The mined results can be applied in CRM to
help decision marker make correct business decisions for marketing
strategies.
Abstract: Different methods containing biometric algorithms are
presented for the representation of eigenfaces detection including
face recognition, are identification and verification. Our theme of this
research is to manage the critical processing stages (accuracy, speed,
security and monitoring) of face activities with the flexibility of
searching and edit the secure authorized database. In this paper we
implement different techniques such as eigenfaces vector reduction
by using texture and shape vector phenomenon for complexity
removal, while density matching score with Face Boundary Fixation
(FBF) extracted the most likelihood characteristics in this media
processing contents. We examine the development and performance
efficiency of the database by applying our creative algorithms in both
recognition and detection phenomenon. Our results show the
performance accuracy and security gain with better achievement than
a number of previous approaches in all the above processes in an
encouraging mode.
Abstract: This study has applied the L16 orthogonal array of the
Taguchi method to determine the optimized polymeric
Nanocomposite asphalt binder. Three control factors are defined as
polypropylene plastomer (PP), styrene-butadiene-styrene elastomer
(SBS) and Nanoclay. Four level of concentration contents are
introduced for prepared asphalt binder samples. all samples were
prepared with 4.5% of bitumen 60/70 content. Compressive strength
tests were carried out for defining the optimized sample via
QUALITEK-4 software. SBS with 3%, PP with 5 % and Nanoclay
with 1.5% of concentrations are defined as the optimized
Nanocomposite asphalt binders. The confirmation compressive
strength and also softening point tests showed that modification of
asphalt binders with this method, improved the compressive strength
and softening points of asphalt binders up to 55%.