Abstract: This paper aims to fabricated high quality anodic
aluminum oxide (AAO) film by anodization method. AAO pore size,
pore density, and film thickness can be controlled in 10~500 nm,
108~1011 pore．cm-2, and 1~100 μm. AAO volume and surface area can
be computed based on structural parameters such as thickness, pore
size, pore density, and sample size. Base on the thetorical calculation,
AAO has 100 μm thickness with 15 nm, 60 nm, and 500 nm pore
diameters AAO surface areas are 1225.2 cm2, 3204.4 cm2, and 549.7
cm2, respectively. The large unit surface area which is useful for
adsorption application. When AAO adsorbed pH indictor of
bromphenol blue presented a sensitive pH detection of solution
change. This testing method can further be used for the precise
measurement of biotechnology, convenience measurement of
industrial engineering.
Abstract: Feed is one of the factors which play an important role in determining a successful development of an aquaculture industry. It is always critical to produce the best aquaculture diet at a minimum cost in order to trim down the operational cost and gain more profit. However, the feed mix problem becomes increasingly difficult since many issues need to be considered simultaneously. Thus, the purpose of this paper is to review the current techniques used by nutritionist and researchers to tackle the issues. Additionally, this paper introduce an enhance algorithm which is deemed suitable to deal with all the issues arise. The proposed technique refers to Hybrid Genetic Algorithm which is expected to obtain the minimum cost diet for farmed animal, while satisfying nutritional requirements. Hybrid GA technique with artificial bee algorithm is expected to reduce the penalty function and provide a better solution for the feed mix problem.
Abstract: Increased physical fitness participation has been
paralleled by increasedoveruse injuries such as insertional Achilles
tendinosis (AT). Treatment has provided inconsistentresults. The use
of extracorporeal shockwave therapy (ECSWT) offers a new
treatment consideration.The purpose of this study was to assess the
effects of ECSWTon pain, function, range of motion (ROM), joint
mobility and strength in patients with AT. Thirty subjects were
treated with ECSWT and measures were takenbefore and three
months after treatment. There was significant differences in visual
analog scale (VAS) scores for pain at rest (p=0.002); after activity
(p= 0.0001); overall improvement(p=0.0001); Lower Extremity
Functional Scale (LEFS) scores (p=0.002); dorsiflexion range of
motion (ROM) (p=0.0001); plantarflexion strength (p=0.025);
talocrural joint anterior glide (p=0.046); and subtalar joint medial and
lateral glide (p=0.025).ECSWT offers a new intervention that may
limit the progression of the disorder and the long term healthcare
costs associated with AT.
Abstract: A business case is a proposal for an investment
initiative to satisfy business and functional requirements. The
business case provides the foundation for tactical decision making
and technology risk management. It helps to clarify how the
organization will use its resources in the best way by providing
justification for investment of resources. This paper describes how
simulation was used for business case benefits and return on
investment for the procurement of 8 production machines. With
investment costs of about 4.7 million dollars and annual operating
costs of about 1.3 million, we needed to determine if the machines
would provide enough cost savings and cost avoidance. We
constructed a model of the existing factory environment consisting of
8 machines and subsequently, we conducted average day simulations
with light and heavy volumes to facilitate planning decisions
required to be documented and substantiated in the business case.
Abstract: This paper proposes an application of the differential
evolution (DE) algorithm for solving the economic dispatch problem
(ED). Furthermore, the regenerating population procedure added to
the conventional DE in order to improve escaping the local minimum
solution. To test performance of DE algorithm, three thermal
generating units with valve-point loading effects is used for testing.
Moreover, investigating the DE parameters is presented. The
simulation results show that the DE algorithm, which had been
adjusted parameters, is better convergent time than other optimization
methods.
Abstract: To simulate heating systems in buildings, a research oriented computer code has been developed in Sharif University of Technology in Iran where the climate, existing heating equipment in buildings, consumer behavior and their interactions are considered for simulating energy consumption in conventional systems such as heaters, radiators and fan-coils. In order to validate the computer code, the available data of five buildings was used and the computed consumed energy was compared with the estimated energy extracted from monthly bills. The initial heating system was replaced by the alternative system and the effect of this change was observed on the energy consumption. As a result, the effect of changing heating equipment on energy consumption was investigated in different climates. Changing heater to radiator renders energy conservation up to 50% in all climates and changing radiator to fan-coil decreases energy consumption in climates with cold and dry winter.
Abstract: The Mahin area is a part of Tarom- Hashtjin zone that
located in west of Qazvin province in northwest of Iran. Many copper
and base metals ore deposits are hosted by this zone. High potential
localities identification in this area is very necessary. The objective of
this research, is finding hydrothermal alteration zones by remote
sensing methods and best processing technique of Advanced
Spaceborne Thermal Emission and Reflection Radiometer (ASTER)
data. Different methods such as band ratio, Principal Component
Analysis (PCA), Minimum Noise Fraction (MNF) and Least Square
Fit (LS-Fit) were used for mapping hydrothermal alteration zones.
Abstract: Indian telecom services industry has been witnessing
a stupendous growth since 1990s. Over the years, subscriber base has
grown steadily and it crossed 950 million marks in March 2012.
India with second largest subscriber base also offers one of the
lowest call tariffs in the world. But in the euphoria of high growth in
services, the equipment manufacturing received least priority. India
mainly depends on imported components from China. Of late, it is
realized that lack of domestic manufacturing may pose a serious
challenge to India-s continued success in the telecom sector.
Therefore, the National Telecom Policy 2012 aims at developing a
strong equipment manufacturing base within India. This paper
realistically assesses India-s true potential in equipment
manufacturing and seeks to identify the emerging issues and
challenges before the Indian telecom equipment manufacturing sector
while it tries to make a transition from an import-dependent industry
to a global manufacturing hub.
Abstract: Overall, the findings of the present study suggest that
teachers have low to moderate levels of professionalisation, high
level of career identity and moderate levels of career resilience, and
career planning. From the T-tests and F-tests conducted, it was found
that gender has a significant impact on career identity whereas age
and marital status have significant impact on career planning and also
on career identity. The results indicate that there is a higher
possibility of male teachers to leave the teaching profession than the
female teachers. The result of the T-test on career identity in relation
to gender supports this deduction in which female teachers have
significantly higher career identity than their male counterparts.
Marital status was also found to have a significant impact on career
identity.
Abstract: Traffic flow in adverse weather conditions have been investigated in this study for general traffic, week day and week end traffic. The empirical evidence is strong in support of the view that rainfall affects macroscopic traffic flow parameters. Data generated from a basic highway section along J5 in Johor Bahru, Malaysia was synchronized with 161 rain events over a period of three months. This revealed a 4.90%, 6.60% and 11.32% reduction in speed for light rain, moderate rain and heavy rain conditions respectively. The corresponding capacity reductions in the three rainfall regimes are 1.08% for light rain, 6.27% for moderate rain and 29.25% for heavy rain. In the week day traffic, speed drops of 8.1% and 16.05% were observed for light and heavy conditions. The moderate rain condition speed increased by 12.6%. The capacity drops for week day traffic are 4.40% for light rain, 9.77% for moderate rain and 45.90% for heavy rain. The weekend traffic indicated speed difference between the dry condition and the three rainy conditions as 6.70% for light rain, 8.90% for moderate rain and 13.10% for heavy rain. The capacity changes computed for the weekend traffic were 0.20% in light rain, 13.90% in moderate rain and 16.70% in heavy rain. No traffic instabilities were observed throughout the observation period and the capacities reported for each rain condition were below the norain condition capacity. Rainfall has tremendous impact on traffic flow and this may have implications for shock wave propagation.
Abstract: This paper presents a dominant color descriptor
technique for medical image retrieval. The medical image system
will collect and store into medical database. The purpose of
dominant color descriptor (DCD) technique is to retrieve medical
image and to display similar image using queried image. First, this
technique will search and retrieve medical image based on keyword
entered by user. After image is found, the system will assign this
image as a queried image. DCD technique will calculate the image
value of dominant color. Then, system will search and retrieve again
medical image based on value of dominant color query image.
Finally, the system will display similar images with the queried
image to user. Simple application has been developed and tested
using dominant color descriptor. Result based on experiment
indicates this technique is effective and can be used for medical
image retrieval.
Abstract: This study reports the preparation of soft magnetic
ribbons of Fe-based amorphous alloys using the single-roller melt-spinning technique. Ribbon width varied from 142 mm to 213
mm and, with a thickness of approximately 22 μm ± 2 μm. The microstructure and magnetic properties of the ribbons were
characterized by differential scanning calorimeter (DSC), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and electrical resistivity measurements (ERM). The amorphous material
properties dependence of the cooling rate and nozzle pressure have uneven surface in ribbon thicknesses are investigated. Magnetic
measurement results indicate that some region of the ribbon exhibits good magnetic properties, higher saturation induction and lower coercivity. However, due to the uneven surface of 213 mm wide
ribbon, the magnetic responses are not uniformly distributed. To
understand the transformer magnetic performances, this study analyzes the measurements of a three-phase 2 MVA amorphous-cored transformer. Experimental results confirm that the transformer with a
ribbon width of 142 mm has better magnetic properties in terms of lower core loss, exciting power, and audible noise.
Abstract: This paper reviews the major contributions to the Motion Planning (MP) field throughout a 35-year period, from classic approaches to heuristic algorithms. Due to the NP-Hardness of the MP problem, heuristic methods have outperformed the classic approaches and have gained wide popularity. After surveying around 1400 papers in the field, the amount of existing works for each method is identified and classified. Especially, the history and applications of numerous heuristic methods in MP is investigated. The paper concludes with comparative tables and graphs demonstrating the frequency of each MP method's application, and so can be used as a guideline for MP researchers.
Abstract: The concept of housing affordability is a contested
issue, but a pressing and widespread problem for many countries.
Simple ratio measures based on housing expenditure and income are
habitually used to defined and assess housing affordability. However,
conceptualising and measuring affordability in this manner focuses
only on financial attributes and fails to deal with wider issues such as
housing quality, location and access to services and facilities.
The research is based on the notion that the housing affordability
problem encompasses more than the financial costs of housing and a
households ability to meet such costs and must address larger issues
such as social and environmental sustainability and the welfare of
households. Therefore, the need arises for a broad and more
encompassing set of attributes by which housing affordability can be
assessed. This paper presents a system of criteria by which the
affordability of different housing locations could be assessed in a
comprehensive and sustainable manner. Moreover, the paper explores
the way in which such criteria could be measured.
Abstract: In this study, the kinetic of biogas production was studied by performing a series laboratory experiment using rumen fluid of animal ruminant as inoculums. Cattle manure as substrate was inoculated by rumen fluid to the anaerobic biodigester. Laboratory experiments using 400 ml biodigester were performed in batch operation mode. Given 100 grams of fresh cattle manure was fed to each biodigester and mixed with rumen fluid by manure : rumen weight ratio of 1:1 (MR11). The operating temperatures were varied at room temperature and 38.5 oC. The cumulative volume of biogas produced was used to measure the biodigester performance. The research showed that the rumen fluid inoculated to biodigester gave significant effect to biogas production (P
Abstract: Hair is a non homogenous complex material which
can be associated with a polymer. It is made up 95% of Keratin.
Hair has a great social significance for human beings. In the High
Middle Ages, for example, long hairs have been reserved for kings
and nobles.
Most common interest in hair is focused on hair growth, hair types
and hair care, but hair is also an important biomaterial which can
vary depending on ethnic origin or on age, hair colour for example
can be a sign of ethnic ancestry or age (dark hair for Asiatic, blond
hair for Caucasian and white hair for old people in general).
In this context, different approaches have been conducted to
determine the differences in mechanical properties and characterize
the fracture topography at the surface of hair depending on its type
and its age.
A tensile testing machine was especially designed to achieve
tensile tests on hair. This device is composed of a microdisplacement
system and a force sensor whose peak load is limited to
3N. The curves and the values extracted from each experiment, allow
us to compare the evolution of the mechanical properties from one
hair to another.
Observations with a Scanning Electron Microscope (SEM) and
with an interferometer were made on different hairs. Thus, it is
possible to access the cuticle state and the fracture topography for
each category.
Abstract: Ant colony optimization (ACO) and its variants are
applied extensively to resolve various continuous optimization
problems. As per the various diversification and intensification
schemes of ACO for continuous function optimization, researchers
generally consider components of multidimensional state space to
generate the new search point(s). However, diversifying to a new
search space by updating only components of the multidimensional
vector may not ensure that the new point is at a significant distance
from the current solution. If a minimum distance is not ensured
during diversification, then there is always a possibility that the
search will end up with reaching only local optimum. Therefore, to
overcome such situations, a Mahalanobis distance-based
diversification with Nelder-Mead simplex-based search scheme for
each ant is proposed for the ACO strategy. A comparative
computational run results, based on nine nonlinear standard test
problems, confirms that the performance of ACO is improved
significantly with the integration of the proposed schemes in the
ACO.
Abstract: In two studies we challenged the well consolidated
position in regret literature according to which the necessary
condition for the emergence of regret is a bad outcome ensuing from
free decisions. Without free choice, and, consequently, personal
responsibility, other emotions, such as disappointment, but not regret,
are supposed to be elicited. In our opinion, a main source of regret is
being obliged by circumstance out of our control to chose an
undesired option. We tested the hypothesis that regret resulting from
a forced choice is more intense than regret derived from a free choice
and that the outcome affects the latter, not the former. Besides, we
investigated whether two other variables – the perception of the level
of freedom of the choice and the choice justifiability – mediated the
relationships between choice and regret, as well as the other four
emotions we examined: satisfaction, anger toward oneself,
disappointment, anger towards circumstances. The two studies were
based on the scenario methodology and implied a 2 x 2 (choice x
outcome) between design. In the first study the foreseen short-term
effects of the choice were assessed; in the second study the
experienced long-term effects of the choice were assessed. In each
study 160 students of the Second University of Naples participated.
Results largely corroborated our hypotheses. They were discussed in
the light of the main theories on regret and decision making.
Abstract: In this paper we compare the accuracy of data mining
methods to classifying students in order to predicting student-s class
grade. These predictions are more useful for identifying weak
students and assisting management to take remedial measures at early
stages to produce excellent graduate that will graduate at least with
second class upper. Firstly we examine single classifiers accuracy on
our data set and choose the best one and then ensembles it with a
weak classifier to produce simple voting method. We present results
show that combining different classifiers outperformed other single
classifiers for predicting student performance.
Abstract: This study retrospectively investigated the significance of whole body CT (WCT) for patients with sepsis. A medical chart review was retrospectively performed for all patients with systemic inflammatory response syndrome that were treated initially between April 2011 and March 2012. The subjects were divided into a WCT group that underwent WCT on arrival and a control group. Results of this study suggested that WCT for sepsis was useful for elderly patients whose chief complaint or physiological findings could not suggest the anatomical site of infection, to determine the infectious focus and indications/method for surgery, to diagnose the basic diseases associated with opportunistic infections and to evaluate complicated diseases