Abstract: Existing literature ondesign reasoning seems to give
either one sided accounts on expert design behaviour based on
internal processing. In the same way ecological theoriesseem to
focus one sidedly on external elementsthat result in a lack of unifying
design cognition theory. Although current extended design cognition
studies acknowledge the intellectual interaction between internal and
external resources, there still seems to be insufficient understanding
of the complexities involved in such interactive processes. As
such,this paper proposes a novelmulti-directional model for design
researchers tomap the complex and dynamic conduct controlling
behaviour in which both the computational and ecological
perspectives are integrated in a vertical manner. A clear distinction
between identified intentional and emerging physical drivers, and
relationships between them during the early phases of experts- design
process, is demonstrated by presenting a case study in which the
model was employed.
Abstract: The recycling of concrete, bricks and masonry rubble
as concrete aggregates is an important way to contribute to a
sustainable material flow. However, there are still various
uncertainties limiting the widespread use of Recycled Concrete
Aggregates (RCA). The fluctuations in the composition of grade
recycled aggregates and their influence on the properties of fresh and
hardened concrete are of particular concern regarding the use of
RCA. Most of problems occurring while using recycled concrete
aggregates as aggregates are due to higher porosity and hence higher
water absorption, lower mechanical strengths, residual impurities on
the surface of the RCA forming weaker bond between cement paste
and aggregate. So, the reuse of RCA is still limited. Efficient
polymer based treatment is proposed in order to reuse RCA easier.
The silicon-based polymer treatments of RCA were carried out and
were compared. This kind of treatment can improve the properties of
RCA such as the rate of water absorption on treated RCA is
significantly reduced.
Abstract: The major problem that wireless communication
systems undergo is multipath fading caused by scattering of the
transmitted signal. However, we can treat multipath propagation as
multiple channels between the transmitter and receiver to improve
the signal-to-scattering-noise ratio. While using Single Input
Multiple Output (SIMO) systems, the diversity receivers extract
multiple signal branches or copies of the same signal received from
different channels and apply gain combining schemes such as Root
Mean Square Gain Combining (RMSGC). RMSGC asymptotically
yields an identical performance to that of the theoretically optimal
Maximum Ratio Combining (MRC) for values of mean Signal-to-
Noise-Ratio (SNR) above a certain threshold value without the need
for SNR estimation. This paper introduces an improvement of
RMSGC using two different issues. We found that post-detection and
de-noising the received signals improve the performance of RMSGC
and lower the threshold SNR.
Abstract: This document details the process of developing a
wireless device that captures the basic movements of the foot (plantar
flexion, dorsal flexion, abduction, adduction.), and the knee
movement (flexion). It implements a motion capture system by using
a hardware based on optical fiber sensors, due to the advantages in
terms of scope, noise immunity and speed of data transmission and
reception. The operating principle used by this system is the detection
and transmission of joint movement by mechanical elements and
their respective measurement by optical ones (in this case infrared).
Likewise, Visual Basic software is used for reception, analysis and
signal processing of data acquired by the device, generating a 3D
graphical representation in real time of each movement. The result is
a boot in charge of capturing the movement, a transmission module
(Implementing Xbee Technology) and a receiver module for
receiving information and sending it to the PC for their respective
processing.
The main idea with this device is to help on topics such as
bioengineering and medicine, by helping to improve the quality of
life and movement analysis.
Abstract: This paper applies fuzzy set theory to evaluate the
service quality of online auction. Service quality is a composition of
various criteria. Among them many intangible attributes are difficult
to measure. This characteristic introduces the obstacles for respondent
in replying to the survey. So as to overcome this problem, we
invite fuzzy set theory into the measurement of performance. By
using AHP in obtaining criteria and TOPSIS in ranking, we found
the most concerned dimension of service quality is Transaction
Safety Mechanism and the least is Charge Item. Regarding to the
most concerned attributes are information security, accuracy and
information.
Abstract: Fip-gts, an immunomodulatory protein purified from Ganoderma tsugae, has been reported to possess therapeutic effects in the treatment of cancer and autoimmune disease. For medicinal application, a recombinant Fip-gts was successfully expressed and purified in Sf21 insect cells by our previously work. It is important to evaluate the immunomodulatory activity of the rFip-gts. To assess the immunomodulatory potential of rFip-gts, the T lymphocytes of murine splenocytes were used in the present study. Results revealed that rFip-gts induced cellular aggregation formation. Additionally, the expression of IL-2 and IFN-r were up-regulated after the treatment of rFip-gts, and a corresponding increased production of IL-2 and IFN-r in a dose-dependent manner. The results showed that rFip-gts has an immunomodulatory activity in inducing Th1 lymphocytes from murine splenocytes released IL-2 and IFN-γ, thus suggest that rFip-gts may have therapeutic potential in vivo as an immune modulator.
Abstract: To investigate the possible correlation between peer aggression and peer victimization, 148 sixth-graders were asked to respond to the Reduced Aggression and Victimization Scales (RAVS). RAVS measures the frequency of reporting aggressive behaviors or of being victimized during the previous week prior to the survey. The scales are composed of six items each. Each point represents one instance of aggression or victimization. Specifically, the Pearson Product-Moment Correlation Coefficient (PMCC) was used to determine the correlations between the scores of the sixthgraders in the two scales, both in individual items and total scores. Positive correlations were established and correlations were significant at the 0.01 levels.
Abstract: This research aims to examine the key success factors
for the diffusion of mobile entertainment services in Malaysia. The
drivers and barriers observed in this research include perceived
benefit; concerns pertaining to pricing, product and technological
standardization, privacy and security; as well as influences from
peers and community. An analysis of a Malaysian survey of 384
respondents between 18 to 25 years shows that subscribers placed
greater importance on perceived benefit of mobile entertainment
services compared to other factors. Results of the survey also show
that there are strong positive correlations between all the factors,
with pricing issue–perceived benefit showing the strongest
relationship. This paper aims to provide an extensive study on the
drivers and barriers that could be used to derive architecture for
entertainment service provision to serve as a guide for telcos to
outline suitable approaches in order to encourage mass market
adoption of mobile entertainment services in Malaysia.
Abstract: This study was conducted Ismailoglu grape type (Vitis
vinifera L.) and its vine which was aged 15 was grown on its own
root in a vegetation period of 2013 in Nevşehir province in Turkey.
In this research, it was investigated whether the applications of
Control (C), 1/3 cluster tip reduction (1/3 CTR), shoot tip reduction
(STR), 1/3 CTR + STR, TKI-HUMAS (TKI-HM) (Soil) (S), TKIHM
(Foliar) (F), TKI-HM (S + F), 1/3 CTR + TKI-HM (S), 1/3 CTR
+ TKI-HM (F), 1/3 CTR + TKI-HM (S+F), STR + TKI-HM (S), STR
+ TKI-HM (F), STR + TKI-HM (S + F), 1/3 CTR + STR+TKI-HM
(S), 1/3 CTR + STR + TKI-HM (F), 1/3 CTR + STR + TKI-HM (S +
F) on yield and yield components of Ismailoglu grape type. The
results were obtained as the highest fresh grape yield (16.15 kg/vine)
with TKI-HM (S), as the highest cluster weight (652.39 g) with 1/3
CTR + STR, as the highest 100 berry weight (419.07 g) with 1/3
CTR + STR + TKI-HM (F), as the highest maturity index (44.06)
with 1/3 CTR, as the highest must yield (810.00 ml) with STR +
TKI-HM (F), as the highest intensity of L* color (42.04) with TKIHM
(S + F), as the highest intensity of a* color (2.60) with 1/3 CTR
+ TKI-HM (S), as the highest intensity of b* color (7.16) with 1/3
CTR + TKI-HM (S) applications. To increase the fresh grape yield of
Ismailoglu grape type can be recommended TKI-HM (S) application.
Abstract: This paper aims to develop an algorithm of finite
capacity material requirement planning (FCMRP) system for a multistage
assembly flow shop. The developed FCMRP system has two
main stages. The first stage is to allocate operations to the first and
second priority work centers and also determine the sequence of the
operations on each work center. The second stage is to determine the
optimal start time of each operation by using a linear programming
model. Real data from a factory is used to analyze and evaluate the
effectiveness of the proposed FCMRP system and also to guarantee a
practical solution to the user. There are five performance measures,
namely, the total tardiness, the number of tardy orders, the total
earliness, the number of early orders, and the average flow-time. The
proposed FCMRP system offers an adjustable solution which is a
compromised solution among the conflicting performance measures.
The user can adjust the weight of each performance measure to
obtain the desired performance. The result shows that the combination
of FCMRP NP3 and EDD outperforms other combinations
in term of overall performance index. The calculation time for the
proposed FCMRP system is about 10 minutes which is practical for
the planners of the factory.
Abstract: One important objective in Precision Agriculture is to minimize the volume of herbicides that are applied to the fields through the use of site-specific weed management systems. In order to reach this goal, two major factors need to be considered: 1) the similar spectral signature, shape and texture between weeds and crops; 2) the irregular distribution of the weeds within the crop's field. This paper outlines an automatic computer vision system for the detection and differential spraying of Avena sterilis, a noxious weed growing in cereal crops. The proposed system involves two processes: image segmentation and decision making. Image segmentation combines basic suitable image processing techniques in order to extract cells from the image as the low level units. Each cell is described by two area-based attributes measuring the relations among the crops and the weeds. From these attributes, a hybrid decision making approach determines if a cell must be or not sprayed. The hybrid approach uses the Support Vector Machines and the Fuzzy k-Means methods, combined through the fuzzy aggregation theory. This makes the main finding of this paper. The method performance is compared against other available strategies.
Abstract: The study was designed to develop a measurement of
the positive emotion regulation questionnaire (PERQ) that assesses
positive emotion regulation strategies through self-report. The 14
items developed for the surveying instrument of the study were based
upon literatures regarding elements of positive regulation strategies.
319 elementary students (age ranging from 12 to14) were recruited
among three public elementary schools to survey on their use of
positive emotion regulation strategies. Of 319 subjects, 20 invalid
questionnaire s yielded a response rate of 92%. The data collected
wasanalyzed through methods such as item analysis, factor analysis,
and structural equation models. In reference to the results from item
analysis, the formal survey instrument was reduced to 11 items. A
principal axis factor analysis with varimax was performed on
responses, resulting in a 2-factor equation (savoring strategy and
neutralizing strategy), which accounted for 55.5% of the total
variance. Then, the two-factor structure of scale was also identified by
structural equation models. Finally, the reliability coefficients of the
two factors were Cronbach-s α .92 and .74. Gender difference was
only found in savoring strategy. In conclusion, the positive emotion
regulation strategies questionnaire offers a brief, internally consistent,
and valid self-report measure for understanding the emotional
regulation strategies of children that may be useful to researchers and
applied professionals.
Abstract: with increasing circuits- complexity and demand to
use portable devices, power consumption is one of the most
important parameters these days. Full adders are the basic block of
many circuits. Therefore reducing power consumption in full adders
is very important in low power circuits. One of the most powerconsuming
modules in full adders is XOR/XNOR circuit. This paper
presents two new full adders based on two new logic approaches. The
proposed logic approaches use one XOR or XNOR gate to implement
a full adder cell. Therefore, delay and power will be decreased. Using
two new approaches and two XOR and XNOR gates, two new full
adders have been implemented in this paper. Simulations are carried
out by HSPICE in 0.18μm bulk technology with 1.8V supply voltage.
The results show that the ten-transistors proposed full adder has 12%
less power consumption and is 5% faster in comparison to MB12T
full adder. 9T is more efficient in area and is 24% better than similar
10T full adder in term of power consumption. The main drawback of
the proposed circuits is output threshold loss problem.
Abstract: It is quite essential to form dialogue mechanisms and
dialogue channels to solve intercultural communication issues.
Therefore, every country should develop a intercultural education
project which aims to resolve international communication issues.
For proper mediation training, the first step is to reach an agreement
on the actors to run the project. The strongest mediation mechanisms
in the world should be analyzed and initiated within the educational
policies. A communication-based mediation model should be
developed for international mediation training. Mediators can use
their convincing communication skills as a part of this model. At the
first, fundamental stages of the mediation training should be specified
within the scope of the model. Another important topic at this point is
common sence and peace leaders to act as an ombudsman in this
process. Especially for solving some social issues and conflicts,
common sense leaders acting as an ombudsman would lead to
effective communication. In mediation training that is run by
universities and non-governmental organizations, another phase is to
focus on conducting the meetings. In intercultural mediation training,
one of the most critical topics is to conduct the meeting traffic and
performing a shuttle diplomacy. Meeting traffic is where the mediator
organizes meetings with the parties with initiative powers, in order to
contribute to the solution of the issue, and schedule these meetings.
In this notice titled “ Intercultural mediation training and the training
process of common sense leaders by the leadership of universities
communication and artistic campaigns" , communication models and
strategies about this topic will be constructed and an intercultural art
activities and perspectives will be presented.
Abstract: The malfunction of thermal protection system (TPS) caused by aerodynamic heating is a latent trouble to aircraft structure safety. Accurately predicting the structure temperature field is quite important for the TPS design of hypersonic vehicle. Since Thornton’s work in 1988, the coupled method of aerodynamic heating and heat transfer has developed rapidly. However, little attention has been paid to the influence of structural deformation on aerodynamic heating and structural temperature field. In the flight, especially the long-endurance flight, the structural deformation, caused by the aerodynamic heating and temperature rise, has a direct impact on the aerodynamic heating and structural temperature field. Thus, the coupled interaction cannot be neglected. In this paper, based on the method of static aero-thermo-elasticity, considering the influence of aero-thermo-elasticity deformation, the aerodynamic heating and heat transfer coupled results of hypersonic vehicle wing model were calculated. The results show that, for the low-curvature region, such as fuselage or center-section wing, structure deformation has little effect on temperature field. However, for the stagnation region with high curvature, the coupled effect is not negligible. Thus, it is quite important for the structure temperature prediction to take into account the effect of elastic deformation. This work has laid a solid foundation for improving the prediction accuracy of the temperature distribution of aircraft structures and the evaluation capacity of structural performance.
Abstract: Distance education program is a dimension of contemporary and new education technologies. Concepts and applications in this field are the results of a series of educational demands and developments in various communication and education technologies. Distance education applications have some conceptual bases. These are creating new education opportunities, realizing work-education unity, getting democratic in education, lifelong education, tendency to individual matters, effective use of institutions, integration of technology and education, tendency to individual and social needs, taking three dimensional integration as the main principle (publishing, printed materials and face to face education), reaching maximum mass, individual and mass education integrity and education demand and financial matters balance. Economics, Business Administration and Open Education faculties, which have been giving education within Anadolu University since 1982 in Turkey, are carrying on education with nearly 1.000.000 students. The aim of this study is to determine organizational commitment levels of students who have been studying at Anadolu University Economics, Business Administration and Open Education faculties in the scope of affective, continuance and nominative commitment in Allen&Meyer model. In the study, organizational commitment of the Economics, Business Administration and Open Education faculty students, who are receiving education by means of distance education, to their faculties is dealt after introducing Anadolu University Distance Education system which gives higher education via distance education method in Turkey. In order to increase the success level of faculties it is required for students to have high level of organizational commitment to their faculties. A questionnaire has been applied by using “Organizational Commitment Scale", developed by Meyer&Allen to determine organizational commitments of Economics, Business Administration and Open Education students. Organizational commitment is dealt with as affective, continuance and nominative commitment. The questionnaire was applied face to face to randomly chosen 500 students living in Eskişehir and the data was downloaded to the computer by using SPSS program and the results were analyzed in terms of demographic features (gender, age, marital status, years of study, work and income level) of students by using frequency test, ttest and ANOVA test. As a result of these analyses, when the comments of Open Education Faculty students on levels of affective, continuance and nominative commitment to their faculties were examined, it has been revealed that continuance commitment level has the highest rate. Among the female participants; continuance commitment is high in the age range of 30-40, for normative commitment it is 17-22. However no dominant age range was defined for affective commitment. Regarding the marital status; continuance commitment average is higher among married participants; but nominative affective commitment average is higher among single participants. As to the years of study, affective and continuance commitment is higher among senior students while normative commitment is higher among junior students. Moreover; in terms of continuance, affective and normative commitment, those who do not work and have low income have higher level of all there commitment types than those who work and have relatively high income.
Abstract: In recent years, there has been an increasing interest
toward the use of bovine genotyped embryos for commercial embryo
transfer programs. Biopsy of a few cells in morulla stage is essential
for preimplantation genetic diagnosis (PGD). Low amount of DNA
have limited performing the several molecular analyses within PGD
analyses. Whole genome amplification (WGA) promises to eliminate
this problem. We evaluated the possibility and performance of an
improved primer extension preamplification (I-PEP) method with a
range of starting bovine genomic DNA from 1-8 cells into the WGA
reaction. We optimized a short and simple I-PEP (ssI-PEP) procedure
(~3h). This optimized WGA method was assessed by 6 loci specific
polymerase chain reactions (PCRs), included restriction fragments
length polymorphism (RFLP). Optimized WGA procedure possesses
enough sensitivity for molecular genetic analyses through the few
input cells. This is a new era for generating characterized bovine
embryos in preimplantation stage.
Abstract: In the other to Study of drought stress and Selenium
spraying effect on superoxide dismotase (SOD) activity of rapeseed
(Brassica napus L.) cultivars in Shahr-e-Rey region, an experiment
carried out in Split factorial design in the basis of randomized
complete blocks with 4 replications in 2006. Irrigation in two levels:
Normal irrigation and irrigation with drought stress when the soil
electrical conductivity reached to 60 as main factor and rapeseed
cultivars in 3 levels Zarfam, Okapi, Opera and selenium spraying at
the beginning of flowering stage in 3 levels: 0, 16 and 21 g/ha as sub
factor.
The results showed that the simple and interaction effect of
irrigation, selenium and cultivars on SOD activity had significant
difference. In this case Zarfam cultivar with 2010 u.mg-1 protein and
Opera with 1454 u.mg-1 protein produced maximum and minimum
amounts of SOD activitiy. Interaction effect of irrigation and variety
showed that, normal irrigation in Opera with 1115 u.mg-1 protein
and drought stress in Zarfam with 2784 u.mg-1 protein conducted to
and minimum and maximum amounts of SOD activity.
Interaction effect of irrigation, cultivar and selenium on SOD
indicated that drought stress condition and 21 gr/ha selenium
spraying in Zarfam variety with 3146 u.mg-1 protein gained to
highest activities of SOD.
Abstract: This paper reports the evolving properties of a 3 mm low carbon steel plate after Laser Beam Forming achieve this objective, the chemical analyse material and the formed components were carried thereafter both were characterized through microhardness profiling microstructural evaluation and tensile testing. showed an increase in the elemental concentration of the component when compared to the as received attributed to the enhancement property of the LBF process Ultimate Tensile Strength (UTS) and the Vickers the formed component shows an increase when compared to the as received material, this was attributed to strain hardening and grain refinement brought about by the LBF process. The microstructure of the as received steel consists of equiaxed ferrit that of the formed component exhibits elongated orming process (LBF). To es of the as received out and compared; profiling, The chemical analyses formed material; this can be process. The microhardness of ferrite and pearlite while grains.
Abstract: Electrical distribution systems are incurring large losses as the loads are wide spread, inadequate reactive power compensation facilities and their improper control. A comprehensive static VAR compensator consisting of capacitor bank in five binary sequential steps in conjunction with a thyristor controlled reactor of smallest step size is employed in the investigative work. The work deals with the performance evaluation through analytical studies and practical implementation on an existing system. A fast acting error adaptive controller is developed suitable both for contactor and thyristor switched capacitors. The switching operations achieved are transient free, practically no need to provide inrush current limiting reactors, TCR size minimum providing small percentages of nontriplen harmonics, facilitates stepless variation of reactive power depending on load requirement so as maintain power factor near unity always. It is elegant, closed loop microcontroller system having the features of self regulation in adaptive mode for automatic adjustment. It is successfully tested on a distribution transformer of three phase 50 Hz, Dy11, 11KV/440V, 125 KVA capacity and the functional feasibility and technical soundness are established. The controller developed is new, adaptable to both LT & HT systems and practically established to be giving reliable performance.