Abstract: The highly nonlinear characteristics of drying
processes have prompted researchers to seek new nonlinear control
solutions. However, the relation between the implementation
complexity, on-line processing complexity, reliability control
structure and controller-s performance is not well established. The
present paper proposes high performance nonlinear fuzzy controllers
for a real-time operation of a drying machine, being developed under
a consistent match between those issues. A PCI-6025E data
acquisition device from National Instruments® was used, and the
control system was fully designed with MATLAB® / SIMULINK
language. Drying parameters, namely relative humidity and
temperature, were controlled through MIMOs Hybrid Bang-bang+PI
(BPI) and Four-dimensional Fuzzy Logic (FLC) real-time-based
controllers to perform drying tests on biological materials. The
performance of the drying strategies was compared through several
criteria, which are reported without controllers- retuning. Controllers-
performance analysis has showed much better performance of FLC
than BPI controller. The absolute errors were lower than 8,85 % for
Fuzzy Logic Controller, about three times lower than the
experimental results with BPI control.
Abstract: Secure electronic payment system is presented in this
paper. This electronic payment system is to be secure for clients such
as customers and shop owners. The security architecture of the
system is designed by RC5 encryption / decryption algorithm. This
eliminates the fraud that occurs today with stolen credit card
numbers. The symmetric key cryptosystem RC5 can protect
conventional transaction data such as account numbers, amount and
other information. This process can be done electronically using RC5
encryption / decryption program written by Microsoft Visual Basic
6.0. There is no danger of any data sent within the system being
intercepted, and replaced. The alternative is to use the existing
network, and to encrypt all data transmissions. The system with
encryption is acceptably secure, but that the level of encryption has
to be stepped up, as computing power increases. Results In order to
be secure the system the communication between modules is
encrypted using symmetric key cryptosystem RC5. The system will
use simple user name, password, user ID, user type and cipher
authentication mechanism for identification, when the user first
enters the system. It is the most common method of authentication in
most computer system.
Abstract: One major issue that is regularly cited as a block to
the widespread use of online assessments in eLearning, is that of the
authentication of the student and the level of confidence that an
assessor can have that the assessment was actually completed by that
student. Currently, this issue is either ignored, in which case
confidence in the assessment and any ensuing qualification is
damaged, or else assessments are conducted at central, controlled
locations at specified times, losing the benefits of the distributed
nature of the learning programme. Particularly as we move towards
constructivist models of learning, with intentions towards achieving
heutagogic learning environments, the benefits of a properly
managed online assessment system are clear. Here we discuss some
of the approaches that could be adopted to address these issues,
looking at the use of existing security and biometric techniques,
combined with some novel behavioural elements. These approaches
offer the opportunity to validate the student on accessing an
assessment, on submission, and also during the actual production of
the assessment. These techniques are currently under development in
the DECADE project, and future work will evaluate and report their
use..
Abstract: In this study, a synthetic pathway was created by
assembling genes from Clostridium butyricum and Escherichia coli
in different combinations. Among the genes were dhaB1 and dhaB2
from C. butyricum VPI1718 coding for glycerol dehydratase (GDHt)
and its activator (GDHtAc), respectively, involved in the conversion
of glycerol to 3-hydroxypropionaldehyde (3-HPA). The yqhD gene
from E.coli BL21 was also included which codes for an NADPHdependent
1,3-propanediol oxidoreductase isoenzyme (PDORI)
reducing 3-HPA to 1,3-propanediol (1,3-PD). Molecular modeling
analysis indicated that the conformation of fusion protein of YQHD
and DHAB1 was favorable for direct molecular channeling of the
intermediate 3-HPA. According to the simulation results, the yqhD
and dhaB1 gene were assembled in the upstream of dhaB2 to express
a fusion protein, yielding the recombinant strain E. coliBL21
(DE3)//pET22b+::yqhD-dhaB1_dhaB2 (strain BP41Y3). Strain
BP41Y3 gave 10-fold higher 1,3-PD concentration than E. coliBL21
(DE3)//pET22b+::yqhD-dhaB1_dhaB2 (strain BP31Y2) expressing
the recombinant enzymes simultaneously but in a non-fusion mode.
This is the first report using a gene fusion approach to enhance the
biological conversion of glycerol to the value added compound 1,3-
PD.
Abstract: This questionnaire-based study, aimed to measure and
compare the awareness of English reading strategies among EFL
learners at Bangkok University (BU) classified by their gender, field
of study, and English learning experience. Proportional stratified
random sampling was employed to formulate a sample of 380 BU
students. The data were statistically analyzed in terms of the mean
and standard deviation. t-Test analysis was used to find differences in
awareness of reading strategies between two groups (-male and
female- /-science and social-science students). In addition, one-way
analysis of variance (ANOVA) was used to compare reading strategy
awareness among BU students with different lengths of English
learning experience. The results of this study indicated that the
overall awareness of reading strategies of EFL learners at BU was at
a high level (ðÑ = 3.60) and that there was no statistically significant
difference between males and females, and among students who have
different lengths of English learning experience at the significance
level of 0.05. However, significant differences among students
coming from different fields of study were found at the same level of
significance.
Abstract: Wood pyrolysis for Casuarina glauca, Casuarina cunninghamiana, Eucalyptus camaldulensis, Eucalyptus microtheca was made at 450°C with 2.5°C/min. in a flowing N2-atmosphere. The Eucalyptus genus wood gave higher values of specific gravity, ash , total extractives, lignin, N2-liquid trap distillate (NLTD) and water trap distillate (WSP) than those for Casuarina genus. The GHC of NLTD was higher for Casuarina genus than that for Eucalyptus genus with the highest value for Casuarina cunninghamiana. Guiacol, 4-ethyl-2-methoxyphenol and syringol were observed in the NLTD of all the four wood species reflecting their parent hardwood lignin origin. Eucalyptus camaldulensis wood had the highest lignin content (28.89%) and was pyrolyzed to the highest values of phenolics (73.01%), guaiacol (11.2%) and syringol (32.28%) contents in methylene chloride fraction (MCF) of NLTD. Accordingly, recoveries of syringol and guaiacol may become economically attractive from Eucalyptus camaldulensis.
Abstract: Grid computing is a group of clusters connected over
high-speed networks that involves coordinating and sharing
computational power, data storage and network resources operating
across dynamic and geographically dispersed locations. Resource
management and job scheduling are critical tasks in grid computing.
Resource selection becomes challenging due to heterogeneity and
dynamic availability of resources. Job scheduling is a NP-complete
problem and different heuristics may be used to reach an optimal or
near optimal solution. This paper proposes a model for resource and
job scheduling in dynamic grid environment. The main focus is to
maximize the resource utilization and minimize processing time of
jobs. Grid resource selection strategy is based on Max Heap Tree
(MHT) that best suits for large scale application and root node of
MHT is selected for job submission. Job grouping concept is used to
maximize resource utilization for scheduling of jobs in grid
computing. Proposed resource selection model and job grouping
concept are used to enhance scalability, robustness, efficiency and
load balancing ability of the grid.
Abstract: Business continuity management (BCM) identifies
potential external and internal threats to an organization and their
impacts to business operations. The goal of the article is to identify,
based on the analysis of employee turnover in organizations in the
Czech Republic, the role of personnel planning in BCM. The article
is organized as follows. The first part of the article concentrates on
the theoretical background of the topic. The second part of the article
is dedicated to the evaluation of the outcomes of the survey
conducted (questionnaire survey), focusing on the analysis of
employee turnover in organizations in the Czech Republic. The final
part of the article underlines the role of personnel planning in BCM,
since poor planning of staff needs in an organization can represent
a future threat for business continuity ensuring.
Abstract: Sub-prime mortgage crisis which began in the US is
regarded as the most economic crisis since the Great Depression in the
early 20th century. Especially, hidden problems on efficient operation
of a business were disclosed at a time and many financial institutions
went bankrupt and filed for court receivership. The collapses of
physical market lead to bankruptcy of manufacturing and construction
businesses. This study is to analyze dynamic efficiency of construction
businesses during the five years at the turn of the global financial
crisis. By discovering the trend and stability of efficiency of a
construction business, this study-s objective is to improve
management efficiency of a construction business in the
ever-changing construction market. Variables were selected by
analyzing corporate information on top 20 construction businesses in
Korea and analyzed for static efficiency in 2008 and dynamic
efficiency between 2006 and 2010. Unlike other studies, this study
succeeded in deducing efficiency trend and stability of a construction
business for five years by using the DEA/Window model. Using the
analysis result, efficient and inefficient companies could be figured
out. In addition, relative efficiency among DMU was measured by
comparing the relationship between input and output variables of
construction businesses. This study can be used as a literature to
improve management efficiency for companies with low efficiency
based on efficiency analysis of construction businesses.
Abstract: Participation in sporting activities can lead to injury.
Sport injuries have been widely studied in many sports including the
more extreme categories of aquatic board sports. Kitesurfing is a
relatively new water surface action sport, and has not yet been
widely studied in terms of injuries and stress on the body. The aim of
this study was to get information about which injuries that are most
common among kitesurfing participants, where they occur, and their
causes. Injuries were studied using an international open web
questionnaire (n=206).
The results showed that many respondents reported injuries, in
total 251 injuries to knee (24%), ankle (17%), trunk (16%) and
shoulders (10%), often sustained while doing jumps and tricks
(40%). Among the reported injuries were joint injuries (n=101),
muscle/tendon damages (n=47), wounds and cuts (n=36) and bone
fractures (n=28). Also environmental factors and equipment can
influence the risk of injury, or the extent of injury in a hazardous
situation. Conclusively, the information from this retrospective study
supports earlier studies in terms of prevalence and site of injuries.
Suggestively, this information should be used for to build a
foundation of knowledge about the sport for development of
applications for physical training and product development.
Abstract: The aim of this article is to explain how features of attacks could be extracted from the packets. It also explains how vectors could be built and then applied to the input of any analysis stage. For analyzing, the work deploys the Feedforward-Back propagation neural network to act as misuse intrusion detection system. It uses ten types if attacks as example for training and testing the neural network. It explains how the packets are analyzed to extract features. The work shows how selecting the right features, building correct vectors and how correct identification of the training methods with nodes- number in hidden layer of any neural network affecting the accuracy of system. In addition, the work shows how to get values of optimal weights and use them to initialize the Artificial Neural Network.
Abstract: The research object was wheat bread. Experiments
were carried out at the Faculty of Food Technology of the Latvia
University of Agriculture. An active packaging in combination with
modified atmosphere (MAP, CO2 60% and N2 40%) was examined
and compared with traditional packaging in air ambiance. Polymer
Multibarrier 60, PP and OPP bags were used. Influence of iron based
oxygen absorber in sachets of 100 cc obtained from Mitsubishi Gas
Chemical Europe Ageless® was tested on the quality during the shelf
of wheat bread. Samples of 40±4 g were packaged in polymer
pouches (110 mm x 120 mm), hermetically sealed by MULTIVAC
C300 vacuum chamber machine, and stored in room temperature
+21.0±0.5 °C. The physiochemical properties – weight losses,
moisture content, hardness, pH, colour, changes of atmosphere
content (CO2 and O2) in headspace of packs, and microbial
conditions were analysed before packaging and in the 7th, 14th, 21st
and 28th days of storage.
Abstract: The purpose of this article applies the monthly final
energy yield and failure data of 202 PV systems installed in Taiwan to
analyze the PV operational performance and system availability. This
data is collected by Industrial Technology Research Institute through
manual records. Bad data detection and failure data estimation
approaches are proposed to guarantee the quality of the received
information. The performance ratio value and system availability are
then calculated and compared with those of other countries. It is
indicated that the average performance ratio of Taiwan-s PV systems
is 0.74 and the availability is 95.7%. These results are similar with
those of Germany, Switzerland, Italy and Japan.
Abstract: Primary and secondary data from the Bauchi abattoir were utilized to determine the relative contributions of different livestock species to meat supply in Bauchi Metropolis. Daily livestock slaughter figures for five months (June – October 2011) indicated that more goats (64.0) were slaughtered than either sheep (47.3) or cattle (41.30) each day (P
Abstract: In present study the effects of anti-inflammatory and
antinociceptive of vitex hydro-alcoholic extract were evaluated on
male mice. In inflammatory test mice were divided into 7 groups:
first group was control. The second group, positive control group,
received dexamethasone (15 mg/kg) and the other five groups
received different doses of hydroalcohol extract of Vitex fruit (265,
365, 465, 565, and 665 mg/kg). The inflammation was caused by
xylene-induced ear edema. Formalin test was used for evaluation of
antinociceptive effect of extract. In this test, mice were divided into 7
groups: control, morphine (10mg/kg) as positive control group, and
Vitex extract groups ((265, 365, 465, 565, and 665 mg/kg). All drugs
were administered intrapritoneally, 30 min before each test. The data
were analyzed using one-way ANOVA followed by Tukey-kramer
multiple comparison test. Results have shown significant antiinflammatory
effects of extract at all dosed as compared with control
(P
Abstract: Solid state fermentation of cassava peel with emphasis on protein enrichment using Trichoderma viride was evaluated. The effect of five variables: moisture content, pH, particle size (p), nitrogen source and incubation temperature; on the true protein and total sugars of cassava peel was investigated. The optimum fermentation period was established to be 8 days. Total sugars were 5-fold higher at pH 6 relative to pH 4 and 7-fold higher when cassava peels were fermented at 30oC relative to 25oC as well as using ammonium sulfate as the nitrogen source relative to urea or a combination of both. Total sugars ranged between 123.21mg/g at 50% initial moisture content to 374mg/g at 60% and from 190.59mg/g with particle size range of 2.00>p>1.41mm to 310.10mg/g with 4.00>p>3.35mm.True protein ranged from 229.70 mg/g at pH 4 to 284.05 mg/g at pH 6; from 200.87 mg/g with urea as nitrogen source and to 254.50mg/g with ammonium sulfate; from 213.82mg/g at 50% initial moisture content to 254.50mg/g at 60% moisture content, from 205.75mg/g in cassava peel with 5.6>p> 4.75mm to 268.30 in cassava peel with particle size 4.00>p>3.35mm, from 207.57mg/g at 25oC to 254.50mg/g at 30oC Cassava peel with particle size 4.00>p>3.35 mm and initial moisture content of 60% at pH 6.0, 30oC incubation temperature with ammonium sulfate (10g N / kg substrate) was most suitable for protein enrichment with Trichoderma viride. Crude protein increased from 4.21 % in unfermented cassava peel samples to 10.43 % in fermented samples.
Abstract: The characteristics of fluid flow and phase separation
in an oil-water separator were numerically analysed as part of the
work presented herein. Simulations were performed for different
velocities and droplet diameters, and the way this parameters can
influence the separator geometry was studied.
The simulations were carried out using the software package
Fluent 6.2, which is designed for numerical simulation of fluid flow
and mass transfer. The model consisted of a cylindrical horizontal
separator. A tetrahedral mesh was employed in the computational
domain. The condition of two-phase flow was simulated with the
two-fluid model, taking into consideration turbulence effects using
the k-ε model.
The results showed that there is a strong dependency of phase
separation on mixture velocity and droplet diameter. An increase in
mixture velocity will bring about a slow down in phase separation
and as a consequence will require a weir of greater height. An
increase in droplet diameter will produce a better phase separation.
The simulations are in agreement with results reported in literature
and show that CFD can be a useful tool in studying a horizontal oilwater
separator.
Abstract: This paper shows a simple and effective approach to
the design and implementation of Industrial Information Systems
(IIS) oriented to control the characteristics of each individual product manufactured in a production line and also their manufacturing conditions. The particular products considered in this work are large steel strips that are coiled just after their manufacturing. However, the approach is directly applicable to coiled strips in other industries, like
paper, textile, aluminum, etc. These IIS provide very detailed information of each manufactured product, which complement the general information managed by the ERP system of the production line. In spite of the high importance of this type of IIS to guarantee and improve the quality of the products manufactured in many industries, there are very few works about them in the technical literature. For this reason, this paper represents an important contribution to the development of this type of IIS, providing guidelines for their design, implementation and exploitation.
Abstract: The research objective of the project and article “The impact of Structural Funds on the growth of competitiveness of Polish agriculture" is to assess competitiveness of regions in Poland from the perspective of Polish agriculture by analysing the efficiency of the use of Structural Funds, the economic procedure of their distribution and the regulatory and organisational framework under the Rural Development Programme (RDP). It must be stressed that defining the scope of research in the above manner limits the analysis only to the part of Structural Funds directed to support Polish agriculture.
Abstract: This paper introduces a tool that is being developed for the expression of information security policy controls that govern electronic healthcare records. By reference to published findings, the paper introduces the theory behind the use of knowledge management for automatic and consistent security policy assertion using the formalism called the Secutype; the development of the tool and functionality is discussed; some examples of Secutypes generated by the tool are provided; proposed integration with existing medical record systems is described. The paper is concluded with a section on further work and critique of the work achieved to date.