Abstract: Simulation model is an easy way to build up models
to represent real life scenarios, to identify bottlenecks and to enhance
system performance. Using a valid simulation model may give
several advantages in creating better manufacturing design in order to
improve the system performances. This paper presents result of
implementing a simulation model to design hard disk drive
manufacturing process by applying line balancing to improve both
productivity and quality of hard disk drive process. The line balance
efficiency showed 86% decrease in work in process, output was
increased by an average of 80%, average time in the system was
decreased 86% and waiting time was decreased 90%.
Abstract: This study empirically examines the long run equilibrium relationship between South Africa’s exports and imports using quarterly data from 1985 to 2012. The theoretical framework used for the study is based on Johansen’s Maximum Likelihood cointegration technique which tests for both the existence and number of cointegration vectors that exists. The study finds that both the series are integrated of order one and are cointegrated. A statistically significant cointegrating relationship is found to exist between exports and imports. The study models this unique linear and lagged relationship using a Vector Error Correction Model (VECM). The findings of the study confirm the existence of a long run equilibrium relationship between exports and imports.
Abstract: This paper describes a 2.4 GHz passive switch mixer
and a 5/2.5 GHz voltage-controlled negative Gm oscillator (VCO)
with an inversion-mode MOS varactor. Both circuits are implemented
using a 1P8M 0.13 μm process. The switch mixer has an input
referred 1 dB compression point of -3.89 dBm and a conversion
gain of -0.96 dB when the local oscillator power is +2.5 dBm.
The VCO consumes only 1.75 mW, while drawing 1.45 mA from a
1.2 V supply voltage. In order to reduce the passives size, the VCO
natural oscillation frequency is 5 GHz. A clocked CMOS divideby-
two circuit is used for frequency division and quadrature phase
generation. The VCO has a -109 dBc/Hz phase noise at 1 MHz
frequency offset and a 2.35-2.5 GHz tuning range (after the frequency
division), thus complying with ZigBee requirements.
Abstract: Different techniques for estimating seasonal water
use from soil profile water depletion frequently do not account for
flux below the root zone. Shallow water table contribution to supply
crop water use may be important in arid and semi-arid regions.
Development of predictive root uptake models, under influence of
shallow water table makes it possible for planners to incorporate
interaction between water table and root zone into design of irrigation
projects. A model for obtaining soil moisture depletion from root
zone and water movement below it is discussed with the objective to
determine impact of shallow water table on seasonal moisture
depletion patterns under water table depth variation, up to the bottom
of root zone. The role of different boundary conditions has also been
considered. Three crops: Wheat (Triticum aestivum), Corn (Zea
mays) and Potato (Solanum tuberosum), common in arid & semi-arid
regions, are chosen for the study. Using experimentally obtained soil
moisture depletion values for potential soil moisture conditions,
moisture depletion patterns using a non linear root uptake model have
been obtained for different water table depths. Comparative analysis
of the moisture depletion patterns under these conditions show a wide
difference in percent depletion from different layers of root zone
particularly top and bottom layers with middle layers showing
insignificant variation in moisture depletion values. Moisture
depletion in top layer, when the water table rises to root zone
increases by 19.7%, 22.9% & 28.2%, whereas decrease in bottom
layer is 68.8%, 61.6% & 64.9% in case of wheat, corn & potato
respectively. The paper also discusses the causes and consequences
of increase in moisture depletion from top layers and exceptionally
high reduction in bottom layer, and the possible remedies for the
same. The numerical model developed for the study can be used to
help formulating irrigation strategies for areas where shallow
groundwater of questionable quality is an option for crop production.
Abstract: A local wastewater treatment plant (WWTP)
experiencing poor nitrification tracked down high level of
surfactants in the plant-s influent and effluent. The aims of this project were to assess the potential inhibitory effect of surfactants on activated sludge processes. The effect of the
presence of TergitolNP-9, TrigetolNP-7, Trigetol15-S-9,
dodecylbenzene sulphonate (SDBS) and sodium dodecyl
sulfate (SDS) on activated sludge oxygen uptake rate (OUR) and nitrification were assessed. The average concentration of non-ionic and anionic
surfactants in the influent to the local WWTP were 7 and 8.7 mg/L, respectively. Removal of 67% to 90% of the non-ionic and 93-99% of the anionic surfactants tested were measured. All surfactants tested showed inhibitory effects both on OUR
and nitrification. SDS incurred the lowest inhibition whereas
SDBS and NP-9 caused severe inhibition to OUR and
Nitrification. Activated sludge flocs sizes slightly decreased
after 3 hours contact with the surfactant present in the test.
The results obtained indicated that high concentrations of
surfactants are likely to have an adverse effect on the
performance of WWTPs utilizing activated sludge processes.
Abstract: In this paper a new cost function for blind equalization
is proposed. The proposed cost function, referred to as the modified
maximum normalized cumulant criterion (MMNC), is an extension
of the previously proposed maximum normalized cumulant criterion
(MNC). While the MNC requires a separate phase recovery system
after blind equalization, the MMNC performs joint blind equalization
and phase recovery. To achieve this, the proposed algorithm
maximizes a cost function that considers both amplitude and phase of
the equalizer output. The simulation results show that the proposed
algorithm has an improved channel equalization effect than the MNC
algorithm and simultaneously can correct the phase error that the
MNC algorithm is unable to do. The simulation results also show that
the MMNC algorithm has lower complexity than the MNC algorithm.
Moreover, the MMNC algorithm outperforms the MNC algorithm
particularly when the symbols block size is small.
Abstract: This paper presents a hybrid algorithm for solving a timetabling problem, which is commonly encountered in many universities. The problem combines both teacher assignment and course scheduling problems simultaneously, and is presented as a mathematical programming model. However, this problem becomes intractable and it is unlikely that a proven optimal solution can be obtained by an integer programming approach, especially for large problem instances. A hybrid algorithm that combines an integer programming approach, a greedy heuristic and a modified simulated annealing algorithm collaboratively is proposed to solve the problem. Several randomly generated data sets of sizes comparable to that of an institution in Indonesia are solved using the proposed algorithm. Computational results indicate that the algorithm can overcome difficulties of large problem sizes encountered in previous related works.
Abstract: The purpose of this paper is to explore the relationship
between the customers- issues in company corporate governance and
the financial performance. At the beginning theoretical background
consisting stakeholder theory and corporate governance is presented.
On this theoretical background, the empirical research is built,
collecting data of 60 Czech joint stock companies- boards
considering their relationships with customers. Correlation analysis
and multivariate regression analysis were employed to test the sample
on two hypotheses. The weak positive correlation between
stakeholder approach and the company size was identified. But both
hypotheses were not supported, because there was no significant
relation of independent variables to financial performance.
Abstract: The effect of nano Co3O4 addition on the
superconducting properties of (Bi, Pb)-2223 system was studied. The
samples were prepared by the acetate coprecipitation method. The
Co3O4 with different sizes (10-30 nm and 30-50 nm) from x=0.00 to
0.05 was added to Bi1.6Pb0.4Sr2Ca2Cu3Oy(Co3O4)x. Phase analysis by
XRD method, microstructural examination by SEM and dc electrical
resistivity by four point probe method were done to characterize the
samples. The X-ray diffraction patterns of all the samples indicated
the majority Bi-2223 phase along with minor Bi-2212 and Bi-2201
phases. The volume fraction was estimated from the intensities of Bi-
2223, Bi-2212 and Bi-2201 phase. The sample with x=0.01 wt% of
the added Co3O4 (10-30 nm size) showed the highest volume fraction
of Bi-2223 phase (72%) and the highest superconducting transition
temperature, Tc (~102 K). The non-added sample showed the highest
Tc(~103 K) compared to added samples with nano Co3O4 (30-50 nm
size) added samples. Both the onset critical temperature Tc(onset)
and zero electrical resistivity temperature Tc(R=0) were in the range
of 103-115 ±1K and 91-103 ±1K respectively for samples with added
Co3O4 (10-30 nm and 30-50 nm).
Abstract: We constructed a method of noise reduction for
JPEG-compressed image based on Bayesian inference using the
maximizer of the posterior marginal (MPM) estimate. In this method,
we tried the MPM estimate using two kinds of likelihood, both of
which enhance grayscale images converted into the JPEG-compressed
image through the lossy JPEG image compression. One is the
deterministic model of the likelihood and the other is the probabilistic
one expressed by the Gaussian distribution. Then, using the Monte
Carlo simulation for grayscale images, such as the 256-grayscale
standard image “Lena" with 256 × 256 pixels, we examined the
performance of the MPM estimate based on the performance measure
using the mean square error. We clarified that the MPM estimate via
the Gaussian probabilistic model of the likelihood is effective for
reducing noises, such as the blocking artifacts and the mosquito noise,
if we set parameters appropriately. On the other hand, we found that
the MPM estimate via the deterministic model of the likelihood is not
effective for noise reduction due to the low acceptance ratio of the
Metropolis algorithm.
Abstract: The main issue of interest here is whether individuals
who differ in arithmetical reasoning ability and levels of imagery ability display different brain activity during the conduct of mental
arithmetical reasoning tasks. This was a case study of four
participants who represented four extreme combinations of Maths –Imagery abilities: ie., low-low, high-high, high-low, low-high respectively. As the Ps performed a series of 60 arithmetical reasoning tasks, 128-channel EEG recordings were taken and the
pre-response interval subsequently analysed using EGI GeosourceTM
software. The P who was high in both imagery and maths ability
showed peak activity prior to response in BA7 (superior parietal cortex) but other Ps did not show peak activity in this region. The
results are considered in terms of the diverse routes that may be employed by individuals during the conduct of arithmetical reasoning
tasks and the possible implications of this for mathematics education.
Abstract: This paper proposes a new technique based on nonlinear Minmax Detector Based (MDB) filter for image restoration. The aim of image enhancement is to reconstruct the true image from the corrupted image. The process of image acquisition frequently leads to degradation and the quality of the digitized image becomes inferior to the original image. Image degradation can be due to the addition of different types of noise in the original image. Image noise can be modeled of many types and impulse noise is one of them. Impulse noise generates pixels with gray value not consistent with their local neighborhood. It appears as a sprinkle of both light and dark or only light spots in the image. Filtering is a technique for enhancing the image. Linear filter is the filtering in which the value of an output pixel is a linear combination of neighborhood values, which can produce blur in the image. Thus a variety of smoothing techniques have been developed that are non linear. Median filter is the one of the most popular non-linear filter. When considering a small neighborhood it is highly efficient but for large window and in case of high noise it gives rise to more blurring to image. The Centre Weighted Mean (CWM) filter has got a better average performance over the median filter. However the original pixel corrupted and noise reduction is substantial under high noise condition. Hence this technique has also blurring affect on the image. To illustrate the superiority of the proposed approach, the proposed new scheme has been simulated along with the standard ones and various restored performance measures have been compared.
Abstract: A virtualized and virtual approach is presented on
academically preparing students to successfully engage at a strategic
perspective to understand those concerns and measures that are both
structured and not structured in the area of cyber security and
information assurance. The Master of Science in Cyber Security and
Information Assurance (MSCSIA) is a professional degree for those
who endeavor through technical and managerial measures to ensure
the security, confidentiality, integrity, authenticity, control,
availability and utility of the world-s computing and information
systems infrastructure. The National University Cyber Security and
Information Assurance program is offered as a Master-s degree. The
emphasis of the MSCSIA program uniquely includes hands-on
academic instruction using virtual computers. This past year, 2011,
the NU facility has become fully operational using system
architecture to provide a Virtual Education Laboratory (VEL)
accessible to both onsite and online students. The first student cohort
completed their MSCSIA training this past March 2, 2012 after
fulfilling 12 courses, for a total of 54 units of college credits. The
rapid pace scheduling of one course per month is immensely
challenging, perpetually changing, and virtually multifaceted. This
paper analyses these descriptive terms in consideration of those
globalization penetration breaches as present in today-s world of
cyber security. In addition, we present current NU practices to
mitigate risks.
Abstract: Medical compression bandages are widely used in the
treatment of chronic venous disorder. In order to design effective
compression bandages, researchers have attempted to describe the
interface pressure applied by multi-layer bandages using mathematical
models. This paper reports on the work carried out to
compare and validate the mathematical models used to describe the
interface pressure applied by multi-layer bandages. Both analytical
and experimental results showed that using simple multiplication
of a number of bandage layers with the pressure applied by one
layer of bandage or ignoring the increase in the limb radius due to
former layers of bandage will result in overestimating the pressure.
Experimental results showed that the mathematical models, which
take into consideration the increase in the limb radius due to former
bandage layers, are more accurate than the one which does not.
Abstract: With the proliferation of the mobile device
technologies, mobile learning can be used to complement and
improve traditional learning problems. Both students and teachers
need a proper and handy system to monitor and keep track the
performance of the students. This paper presents an implementation
of M-learning for primary school in Malaysia by using an open
source technology. It focuses on learning mathematics using
handheld devices for primary schools- students aged 11 and 12 years
old. Main users for this system include students, teachers and the
administrator. This application suggests a new mobile learning
environment with mobile graph for tracking the students- progress
and performance. The purpose of this system is not to replace
traditional classroom but to complement the learning process. In a
testing conducted, students who used this system performed better in
their examination.
Abstract: In this work, we suggested a new approach for the
control of a mobile robot capable of being a building block of an
intelligent agent. This approach includes obstacle avoidance and goal
tracking implemented as two different sliding mode controllers. A
geometry based behavior arbitration is proposed for fusing the two
outputs. Proposed structure is tested on simulations and real robot.
Results have confirmed the high performance of the method.
Abstract: Near-infrared (NIR) spectroscopy is a widely used
method for material identification for laboratory and industrial applications.
While standard spectrometers only allow measurements at
one sampling point at a time, NIR Spectral Imaging techniques can
measure, in real-time, both the size and shape of an object as well as
identify the material the object is made of. The online classification
and sorting of recovered paper with NIR Spectral Imaging (SI)
is used with success in the paper recycling industry throughout
Europe. Recently, the globalisation of the recycling material streams
caused that water-based flexographic-printed newspapers mainly from
UK and Italy appear also in central Europe. These flexo-printed
newspapers are not sufficiently de-inkable with the standard de-inking
process originally developed for offset-printed paper. This de-inking
process removes the ink from recovered paper and is the fundamental
processing step to produce high-quality paper from recovered paper.
Thus, the flexo-printed newspapers are a growing problem for the
recycling industry as they reduce the quality of the produced paper
if their amount exceeds a certain limit within the recovered paper
material.
This paper presents the results of a research project for the
development of an automated entry inspection system for recovered
paper that was jointly conducted by CTR AG (Austria) and PTS
Papiertechnische Stiftung (Germany). Within the project an NIR
SI prototype for the identification of flexo-printed newspaper has
been developed. The prototype can identify and sort out flexoprinted
newspapers in real-time and achieves a detection accuracy
for flexo-printed newspaper of over 95%. NIR SI, the technology the
prototype is based on, allows the development of inspection systems
for incoming goods in a paper production facility as well as industrial
sorting systems for recovered paper in the recycling industry in the
near future.
Abstract: The paper deals with an analysis of visibility records collected from 210 European airports to obtain a realistic estimation of the availability of Free Space Optical (FSO) data links. Commercially available optical links usually operate in the 850nm waveband. Thus the influence of the atmosphere on the optical beam and on the visible light is similar. Long-term visibility records represent an invaluable source of data for the estimation of the quality of service of FSO links. The model used characterizes both the statistical properties of fade depths and the statistical properties of individual fade durations. Results are presented for Italy, France, and Germany.
Abstract: Tourism researchers have recently focused on repeat visitation as a part of destination loyalty. Different models have also considered satisfaction as the main determinant of revisit intention, while findings in many studies show it as a continuous issue. This conceptual paper attempts at evaluating recent empirical studies on satisfaction and revisit intention. Based on limitations and gaps in recent studies, the current paper suggests a new model that would be more comprehensive than those in previous studies. The new model offers new relationships between antecedents (destination image, perceived value, specific novelty seeking, and distance to destination) and both of satisfaction and revisit intention. Revisit intention in turn is suggested to be measured in a temporal approach.
Abstract: This paper aims to describe how student satisfaction is
measured for work-based learners as these are non-traditional
learners, conducting academic learning in the workplace, typically
their curricula have a high degree of negotiation, and whose
motivations are directly related to their employers- needs, as well as
their own career ambitions. We argue that while increasing WBL
participation, and use of SSD are both accepted as being of strategic
importance to the HE agenda, the use of WBL SSD is rarely
examined, and lessons can be learned from the comparison of SSD
from a range of WBL programmes, and increased visibility of this
type of data will provide insight into ways to improve and develop
this type of delivery. The key themes that emerged from the analysis
of the interview data were: learners profiles and needs, employers
drivers, academic staff drivers, organizational approach, tools for
collecting data and visibility of findings. The paper concludes with
observations on best practice in the collection, analysis and use of
WBL SSD, thus offering recommendations for both academic
managers and practitioners.