Abstract: In this paper we propose a new approach for flexible document categorization according to the document type or genre instead of topic. Our approach implements two homogenous classifiers: contextual classifier and logical classifier. The contextual classifier is based on the document URL, whereas, the logical classifier use the logical structure of the document to perform the categorization. The final categorization is obtained by combining contextual and logical categorizations. In our approach, each document is assigned to all predefined categories with different membership degrees. Our experiments demonstrate that our approach is best than other genre categorization approaches.
Abstract: Supplier selection, in real situation, is affected by
several qualitative and quantitative factors and is one of the most
important activities of purchasing department. Since at the time of
evaluating suppliers against the criteria or factors, decision makers
(DMS) do not have precise, exact and complete information, supplier
selection becomes more difficult. In this case, Grey theory helps us
to deal with this problem of uncertainty. Here, we apply Technique
for Order Preference by Similarity to Ideal Solution (TOPSIS)
method to evaluate and select the best supplier by using interval
fuzzy numbers. Through this article, we compare TOPSIS with some
other approaches and afterward demonstrate that the concept of
TOPSIS is very important for ranking and selecting right supplier.
Abstract: This paper presents an intelligent speed control
system based on fuzzy logic for a voltage source PWM inverter-fed
indirect vector controlled induction motor drive. Traditional indirect
vector control system of induction motor introduces conventional PI
regulator in outer speed loop; it is proved that the low precision of the
speed regulator debases the performance of the whole system. To
overcome this problem, replacement of PI controller by an intelligent
controller based on fuzzy set theory is proposed. The performance of
the intelligent controller has been investigated through digital
simulation using MATLAB-SIMULINK package for different
operating conditions such as sudden change in reference speed and
load torque. The simulation results demonstrate that the performance
of the proposed controller is better than that of the conventional PI
controller.
Abstract: In this paper, a novel deinterlacing algorithm is
proposed. The proposed algorithm approximates the distribution of the
luminance into a polynomial function. Instead of using one
polynomial function for all pixels, different polynomial functions are
used for the uniform, texture, and directional edge regions. The
function coefficients for each region are computed by matrix
multiplications. Experimental results demonstrate that the proposed
method performs better than the conventional algorithms.
Abstract: This paper proposes a new design of spatial FIR
filter to automatically detect water level from a video signal of
various river surroundings. A new approach in this report applies
"addition" of frames and a "horizontal" edge detector to distinguish
water region and land region. Variance of each line of a filtered
video frame is used as a feature value. The water level is recognized
as a boundary line between the land region and the water region.
Edge detection filter essentially demarcates between two distinctly
different regions. However, the conventional filters are not
automatically adaptive to detect water level in various lighting
conditions of river scenery. An optimized filter is purposed so that
the system becomes robust to changes of lighting condition. More
reliability of the proposed system with the optimized filter is
confirmed by accuracy of water level detection.
Abstract: Acute disseminated encephalomyelitis (ADEM) has
been reported to develop after a hymenoptera sting, but its
pathogenesis is not known in detail. Myelin basic protein (MBP)-
specific T cells have been detected in the blood of patients with
ADEM, and a proportion of these patients develop multiple sclerosis
(MS). In an attempt to understand the mechanisms underlying
ADEM, molecular mimicry between hymenoptera venom peptides
and the human immunodominant MBP peptide was scrutinized,
based on the sequence and structural similarities, whether it was the
root of the disease. The results suggest that the three wasp venom
peptides have low sequence homology with the human
immunodominant MBP residues 85-99. Structural similarity analysis
among the three venom peptides and the MS-related HLA-DR2b
(DRA, DRB1*1501)-associated immunodominant MHC
binding/TCR contact residues 88-93, VVHFFK showed that
hyaluronidase residues 7-12, phospholipase A1 residues 98-103, and
antigen 5 residues 109-114 showed a high degree of similarity
83.3%, 100%, and 83.3% respectively. In conclusion, some wasp
venom peptides, particularly phospholipase A1, may potentially act
as the molecular motifs of the human 3HLA-DR2b-associated
immunodominant MBP88-93, and possibly present a mechanism for
induction of wasp sting-associated ADEM.
Abstract: Presented herein is an assessment of current nonlinear
static procedures (NSPs) for seismic evaluation of bucklingrestrained
braced frames (BRBFs) which have become a favorable
lateral-force resisting system for earthquake resistant buildings. The
bias and accuracy of modal, improved modal pushover analysis
(MPA, IMPA) and mass proportional pushover (MPP) procedures
are comparatively investigated when they are applied to BRBF
buildings subjected to two sets of strong ground motions. The
assessment is based on a comparison of seismic displacement
demands such as target roof displacements, peak floor/roof
displacements and inter-story drifts. The NSP estimates are compared
to 'exact' results from nonlinear response history analysis (NLRHA).
The response statistics presented show that the MPP
procedure tends to significantly overestimate seismic demands of
lower stories of tall buildings considered in this study while MPA
and IMPA procedures provide reasonably accurate results in
estimating maximum inter-story drift over all stories of studied BRBF
systems.
Abstract: In order to meet the limits imposed on automotive
emissions, engine control systems are required to constrain air/fuel
ratio (AFR) in a narrow band around the stoichiometric value, due to
the strong decay of catalyst efficiency in case of rich or lean mixture.
This paper presents a model of a sample spark ignition engine and
demonstrates Simulink-s capabilities to model an internal combustion
engine from the throttle to the crankshaft output. We used welldefined
physical principles supplemented, where appropriate, with
empirical relationships that describe the system-s dynamic behavior
without introducing unnecessary complexity. We also presents a PID
tuning method that uses an adaptive fuzzy system to model the
relationship between the controller gains and the target output
response, with the response specification set by desired percent
overshoot and settling time. The adaptive fuzzy based input-output
model is then used to tune on-line the PID gains for different
response specifications. Experimental results demonstrate that better
performance can be achieved with adaptive fuzzy tuning relative to
similar alternative control strategies. The actual response
specifications with adaptive fuzzy matched the desired response
specifications.
Abstract: In this paper, we evaluate the choice of suitable
quantization characteristics for both the decoder messages and the
received samples in Low Density Parity Check (LDPC) coded
systems using M-QAM (Quadrature Amplitude Modulation)
schemes. The analysis involves the demapper block that provides
initial likelihood values for the decoder, by relating its quantization
strategy of the decoder. A mapping strategy refers to the grouping of
bits within a codeword, where each m-bit group is used to select a
2m-ary signal in accordance with the signal labels. Further we
evaluate the system with mapping strategies like Consecutive-Bit
(CB) and Bit-Reliability (BR). A new demapper version, based on
approximate expressions, is also presented to yield a low complexity
hardware implementation.
Abstract: It has been shown that pH 7,3 and 37 0C are the optimal condition for the growth of E. coli “ASAP". The cells grow well on Glucose, Lactose, D-Mannitol, D-Sorbitol, (+)-Xylose, L- (+)-Arabinose and Dulcitol. No growth has been observed on Sucrose, Inositol, Phenylalanine, and Tryptophan. The strain is sensitive to a range of antibiotics. The present study has demonstrated that E. coli “ASAP" inhibit the growth of S. enterica ATCC #700931 in vitro. The studies on conjugating activity has revealed no conjugant of E. coli “ASAP" with plasmid strains E. coli G35#59 and S. enterica ATCC #700931. On the other hand, the conjugants with low frequencies were obtained from E. coli “ASAP" with E. coli G35#61, and E. coli “ASAP" with randomly chosen isolate from healthy human gut microflora: E. coli E6. The results of present study have demonstrated improvements in gut microflora condition of patients with different diseases after the administration of “ASAP"
Abstract: Various intelligences and inspirations have been
adopted into the iterative searching process called as meta-heuristics.
They intelligently perform the exploration and exploitation in the
solution domain space aiming to efficiently seek near optimal
solutions. In this work, the bee algorithm, inspired by the natural
foraging behaviour of honey bees, was adapted to find the near
optimal solutions of the transportation management system, dynamic
multi-zone dispatching. This problem prepares for an uncertainty and
changing customers- demand. In striving to remain competitive,
transportation system should therefore be flexible in order to cope
with the changes of customers- demand in terms of in-bound and outbound
goods and technological innovations. To remain higher service
level but lower cost management via the minimal imbalance scenario,
the rearrangement penalty of the area, in each zone, including time
periods are also included. However, the performance of the algorithm
depends on the appropriate parameters- setting and need to be
determined and analysed before its implementation. BEE parameters
are determined through the linear constrained response surface
optimisation or LCRSOM and weighted centroid modified simplex
methods or WCMSM. Experimental results were analysed in terms
of best solutions found so far, mean and standard deviation on the
imbalance values including the convergence of the solutions
obtained. It was found that the results obtained from the LCRSOM
were better than those using the WCMSM. However, the average
execution time of experimental run using the LCRSOM was longer
than those using the WCMSM. Finally a recommendation of proper
level settings of BEE parameters for some selected problem sizes is
given as a guideline for future applications.
Abstract: Virtual engineering technology has undergone rapid progress in recent years and is being adopted increasingly by manufacturing companies of many engineering disciplines. There is an increasing demand from industry for qualified virtual engineers. The qualified virtual engineers should have the ability of applying engineering principles and mechanical design methods within the commercial software package environment. It is a challenge to the engineering education in universities which traditionally tends to lack the integration of knowledge and skills required for solving real world problems. In this paper, a case study shows some recent development of a MSc Mechanical Engineering course at Department of Engineering and Technology in MMU, and in particular, two units Simulation of Mechanical Systems(SMS) and Computer Aided Fatigue Analysis(CAFA) that emphasize virtual engineering education and promote integration of knowledge acquisition, skill training and industrial application.
Abstract: The influence of physical (external added weight) and
neurophysiological (fatigue) factors on static and dynamic balance in
sport related activities was typified statically by the Romberg test
(one foot flat, eyes open) and dynamically by jumping and hopping
in both horizontal and vertical directions. Twenty healthy males were
participated in this study. In Static condition, added weight increased
body-s inertia and therefore decreased body sway in AP direction
though not significantly. Dynamically, added weight significantly
increased body sway in both ML and AP directions, indicating
instability, and the use of the counter rotating segments mechanism to
maintain balance was demonstrated. Fatigue on the other hand
significantly increased body sway during static balance as a
neurophysiological adaptation primarily to the inverted pendulum
mechanism. Dynamically, fatigue significantly increased body sway
in both ML and AP directions again indicating instability but with a
greater use of counter rotating segments mechanism. Differential
adaptations for each of the two balance mechanisms (inverted
pendulum and counter rotating segments) were found between one
foot flat and two feet flat dynamic conditions, as participants relied
more heavily on the first in the one foot flat conditions and relied
more on the second in the two feet flat conditions.
Abstract: An experimental study is realized in order to verify the
Mini Heat Pipe (MHP) concept for cooling high power dissipation
electronic components and determines the potential advantages of
constructing mini channels as an integrated part of a flat heat pipe. A
Flat Mini Heat Pipe (FMHP) prototype including a capillary structure
composed of parallel rectangular microchannels is manufactured and
a filling apparatus is developed in order to charge the FMHP. The
heat transfer improvement obtained by comparing the heat pipe
thermal resistance to the heat conduction thermal resistance of a
copper plate having the same dimensions as the tested FMHP is
demonstrated for different heat input flux rates. Moreover, the heat
transfer in the evaporator and condenser sections are analyzed, and
heat transfer laws are proposed. In the theoretical part of this work, a
detailed mathematical model of a FMHP with axial microchannels is
developed in which the fluid flow is considered along with the heat
and mass transfer processes during evaporation and condensation.
The model is based on the equations for the mass, momentum and
energy conservation, which are written for the evaporator, adiabatic,
and condenser zones. The model, which permits to simulate several
shapes of microchannels, can predict the maximum heat transfer
capacity of FMHP, the optimal fluid mass, and the flow and thermal
parameters along the FMHP. The comparison between experimental
and model results shows the good ability of the numerical model to
predict the axial temperature distribution along the FMHP.
Abstract: In this paper an extensive verification of the extraction
method (published earlier) that consistently accounts for self-heating
and Early effect to accurately extract both base and thermal resistance
of bipolar junction transistors is presented. The method verification is
demonstrated on advanced RF SiGe HBTs were the extracted results
for the thermal resistance are compared with those from another
published method that ignores the effect of Early effect on internal
base-emitter voltage and the extracted results of the base resistance
are compared with those determined from noise measurements. A
self-consistency of our method in the extracted base resistance and
thermal resistance using compact model simulation results is also
carried out in order to study the level of accuracy of the method.
Abstract: Political transition of agricultural properties in Poland and the former German Democratic Republic (GDR) after 1989 had
to include not only Reprivatization but also the issue of returning the
properties in kind to their former owners. Restitution in kind applied
in GDR to all forms of ownership which were subject to
expropriation between 1933 and 1989 except for properties taken
over during Soviet occupation in 1945-49. This issue was one of the flashpoints during the process of ownership changes. Privatization,
limited as it was, took place in unequal legal environment where only
one group of owners was privileged. Executing restitution in kind
created a feeling of uncertainty among potential real estate buyers.
Abstract: Cities denote instantaneously a challenge and an
opportunity for climate change policy. Cities are the place where
most energy services are needed because urbanization is closely
linked to high population densities and concentration of economic
activities and production (Urban energy demand). Consequently, it is
critical to explain about the role of cities within the world-s energy
systems and its correlation with the climate change issue. With more
than half of the world-s population already living in urban areas, and
that percentage expected to rise to 75 per cent by 2050, it is clear that
the path to sustainable development must pass through cities. Cities
expanding in size and population pose increased challenges to the
environment, of which energy is part as a natural resource, and to the
quality of life. Nowadays, most cities have already understood the
importance of sustainability, both at their local scale as in terms of
their contribution to sustainability at higher geographical scales. It
requires the perception of a city as a complex and dynamic
ecosystem, an open system, or cluster of systems, where the energy
as well as the other natural resources is transformed to satisfy the
needs of the different urban activities. In fact, buildings and
transportation generally represent most of cities direct energy
demand, i.e., between 60 per cent and 80 per cent of the overall
consumption. Buildings, both residential and services are usually
influenced by the local physical and social conditions. In terms of
transport, the energy demand is also strongly linked with the specific
characteristics of a city (urban mobility).The concept of a “smart
city" builds on statistics as seven key axes of a city-s success in
moving towards common platform (brain nerve)of sustainable urban
energy systems.
With the aforesaid knowledge, the authors have suggested a frame
work to role of cities, as energy actors for smart city management.
The authors have discusses the potential elements needed for energy
in smart cities and also identified potential energy actions and
relevant barriers. Furthermore, three levels of city smartness in cities
actions to overcome market /institutional failures with a local
approach are distinguished. The authors have made an attempt to
conceive and implement concepts of city smartness by adopting the
city or local government as nerve center through an integrated
planning approach. Finally, concluding with recommendations for
the organization of the Smart Sustainable Cities for positive changes
of urban India.
Abstract: Shippers are concentrating on the core competency to
stay competitive and outsourcing the logistic activities to the third
party who is expert in this field. This third party logistics (3PL) is
drawing the due attention at government, industrial, academicians
and practitioner-s levels. If the logistics cost in India can be brought
down from the current level of 13% of GDP to 9% (level in the U.S.),
the savings would be around Rs 3 lakh crore approximately per
annum. But the problem with the shippers is to select the suitable
3PL provider. Various criteria for selection of 3PL have been listed
in the literature which are discussed in the present literature review.
Every shipper will select the criteria suitable to its own requirement
which have to be dynamically reviewed time to time so as to fit in the
ever changing environment.
Abstract: There is a growing interest in the food industry and in preventive health care for the development and evaluation of natural antioxidants from medicinal plant materials. In the present work, extracts of three medicinal plants (Tilia argentea, Crataegi folium leaves and Polygonum bistorta roots) used in Turkish phytotheraphy were screened for their phenolic profiles and antioxidant properties. Crude extracts were obtained from different parts of plants, by solidliquid extraction with pure water, 70% acetone and 70% methanol aqueous solvents. The antioxidant activity of the extracts was determined by ABTS.+ radical cation scavenging activity. The Folin Ciocalteu procedure was used to assess the total phenolic concentrations of the extracts as gallic acid equivalents. A modified liquid chromatography-electro spray ionization-mass spectrometry (LC-ESI-MS) was used to obtain chromatographic profiles of the phenolic compounds in the medicinal plants. The predominant phenolic compounds detected in different extracts of the plants were catechin, protocatechuic and chlorogenic acids. The highest phenolic contents were obtained by using 70% acetone as aqueous solvent, whereas the lowest phenolic contents were obtained by water extraction due to Folin Ciocalteu results. The results indicate that acetone extracts of Tilia argentea had the highest antioxidant capacity as free ABTS radical scavengers. The lowest phenolic contents and antioxidant capacities were obtained from Polygonum bistorta root extracts.
Abstract: An algorithm for learning an overcomplete dictionary
using a Cauchy mixture model for sparse decomposition of an underdetermined
mixing system is introduced. The mixture density
function is derived from a ratio sample of the observed mixture
signals where 1) there are at least two but not necessarily more
mixture signals observed, 2) the source signals are statistically
independent and 3) the sources are sparse. The basis vectors of the
dictionary are learned via the optimization of the location parameters
of the Cauchy mixture components, which is shown to be more
accurate and robust than the conventional data mining methods
usually employed for this task. Using a well known sparse
decomposition algorithm, we extract three speech signals from two
mixtures based on the estimated dictionary. Further tests with
additive Gaussian noise are used to demonstrate the proposed
algorithm-s robustness to outliers.