Abstract: The purposes of this research are to study and develop
the algorithm of Thai spoonerism words by semi-automatic computer
programs, that is to say, in part of data input, syllables are already
separated and in part of spoonerism, the developed algorithm is
utilized, which can establish rules and mechanisms in Thai
spoonerism words for bi-syllables by utilizing analysis in elements of
the syllables, namely cluster consonant, vowel, intonation mark and
final consonant. From the study, it is found that bi-syllable Thai
spoonerism has 1 case of spoonerism mechanism, namely
transposition in value of vowel, intonation mark and consonant of
both 2 syllables but keeping consonant value and cluster word (if
any).
From the study, the rules and mechanisms in Thai spoonerism
word were applied to develop as Thai spoonerism word software,
utilizing PHP program. the software was brought to conduct a
performance test on software execution; it is found that the program
performs bi-syllable Thai spoonerism correctly or 99% of all words
used in the test and found faults on the program at 1% as the words
obtained from spoonerism may not be spelling in conformity with
Thai grammar and the answer in Thai spoonerism could be more than
1 answer.
Abstract: In this article the accumulated results out of the effects
and length of the manufacture and production projects in the
university and research standard have been settled with the usefulness
definition of the process of project management for the accessibility
to the proportional pattern in the “time and action" stages. Studies
show that many problems confronted by the researchers in these
projects are connected to the non-profiting of: 1) autonomous timing
for gathering the educational theme, 2) autonomous timing for
planning and pattern, presenting before the construction, and 3)
autonomous timing for manufacture and sample presentation from the
output. The result of this study indicates the division of every
manufacture and production projects into three smaller autonomous
projects from its kind, budget and autonomous expenditure, shape
and order of the stages for the management of these kinds of projects.
In this case study real result are compared with theoretical results.
Abstract: The traditional Failure Mode and Effects Analysis
(FMEA) uses Risk Priority Number (RPN) to evaluate the risk level
of a component or process. The RPN index is determined by
calculating the product of severity, occurrence and detection indexes.
The most critically debated disadvantage of this approach is that
various sets of these three indexes may produce an identical value of
RPN. This research paper seeks to address the drawbacks in
traditional FMEA and to propose a new approach to overcome these
shortcomings. The Risk Priority Code (RPC) is used to prioritize
failure modes, when two or more failure modes have the same RPN.
A new method is proposed to prioritize failure modes, when there is a
disagreement in ranking scale for severity, occurrence and detection.
An Analysis of Variance (ANOVA) is used to compare means of
RPN values. SPSS (Statistical Package for the Social Sciences)
statistical analysis package is used to analyze the data. The results
presented are based on two case studies. It is found that the proposed
new methodology/approach resolves the limitations of traditional
FMEA approach.
Abstract: The chemical degradation of dieldrin in ferric
sulfide and iron powder aqueous suspension was investigated
in laboratory batch type experiments. To identify the reaction
mechanism, reduced copper was used as reductant. More than
90% of dieldrin was degraded using both reaction systems after
29 days. Initial degradation rate of the pesticide using ferric
sulfide was superior to that using iron powder. The reaction
schemes were completely dissimilar even though the ferric ion
plays an important role in both reaction systems. In the case of
metallic iron powder, dieldrin undergoes partial dechlorination.
This reaction proceeded by reductive hydrodechlorination with
the generation of H+, which arise by oxidation of ferric iron.
This reductive reaction was accelerated by reductant but
mono-dechlorination intermediates were accumulated. On the
other hand, oxidative degradation was observed in the reaction
with ferric sulfide, and the stable chemical structure of dieldrin
was decomposed into water-soluble intermediates. These
reaction intermediates have no chemical structure of drin class.
This dehalogenation reaction assumes to occur via the adsorbed
hydroxyl radial generated on the surface of ferric sulfide.
Abstract: Existing literature ondesign reasoning seems to give
either one sided accounts on expert design behaviour based on
internal processing. In the same way ecological theoriesseem to
focus one sidedly on external elementsthat result in a lack of unifying
design cognition theory. Although current extended design cognition
studies acknowledge the intellectual interaction between internal and
external resources, there still seems to be insufficient understanding
of the complexities involved in such interactive processes. As
such,this paper proposes a novelmulti-directional model for design
researchers tomap the complex and dynamic conduct controlling
behaviour in which both the computational and ecological
perspectives are integrated in a vertical manner. A clear distinction
between identified intentional and emerging physical drivers, and
relationships between them during the early phases of experts- design
process, is demonstrated by presenting a case study in which the
model was employed.
Abstract: According to the statistics, the prevalence of congenital hearing loss in Taiwan is approximately six thousandths; furthermore, one thousandths of infants have severe hearing impairment. Hearing ability during infancy has significant impact in the development of children-s oral expressions, language maturity, cognitive performance, education ability and social behaviors in the future. Although most children born with hearing impairment have sensorineural hearing loss, almost every child more or less still retains some residual hearing. If provided with a hearing aid or cochlear implant (a bionic ear) timely in addition to hearing speech training, even severely hearing-impaired children can still learn to talk. On the other hand, those who failed to be diagnosed and thus unable to begin hearing and speech rehabilitations on a timely manner might lose an important opportunity to live a complete and healthy life. Eventually, the lack of hearing and speaking ability will affect the development of both mental and physical functions, intelligence, and social adaptability. Not only will this problem result in an irreparable regret to the hearing-impaired child for the life time, but also create a heavy burden for the family and society. Therefore, it is necessary to establish a set of computer-assisted predictive model that can accurately detect and help diagnose newborn hearing loss so that early interventions can be provided timely to eliminate waste of medical resources. This study uses information from the neonatal database of the case hospital as the subjects, adopting two different analysis methods of using support vector machine (SVM) for model predictions and using logistic regression to conduct factor screening prior to model predictions in SVM to examine the results. The results indicate that prediction accuracy is as high as 96.43% when the factors are screened and selected through logistic regression. Hence, the model constructed in this study will have real help in clinical diagnosis for the physicians and actually beneficial to the early interventions of newborn hearing impairment.
Abstract: This document details the process of developing a
wireless device that captures the basic movements of the foot (plantar
flexion, dorsal flexion, abduction, adduction.), and the knee
movement (flexion). It implements a motion capture system by using
a hardware based on optical fiber sensors, due to the advantages in
terms of scope, noise immunity and speed of data transmission and
reception. The operating principle used by this system is the detection
and transmission of joint movement by mechanical elements and
their respective measurement by optical ones (in this case infrared).
Likewise, Visual Basic software is used for reception, analysis and
signal processing of data acquired by the device, generating a 3D
graphical representation in real time of each movement. The result is
a boot in charge of capturing the movement, a transmission module
(Implementing Xbee Technology) and a receiver module for
receiving information and sending it to the PC for their respective
processing.
The main idea with this device is to help on topics such as
bioengineering and medicine, by helping to improve the quality of
life and movement analysis.
Abstract: The incidence of mechanical fracture of an
automobile piston rings prompted development of fracture analysis
method on this case. The three rings (two compression rings and one
oil ring) were smashed into several parts during the power-test (after
manufacturing the engine) causing piston and liner to be damaged.
The radial and oblique cracking happened on the failed piston rings.
The aim of the fracture mechanics simulations presented in this paper
was the calculation of particular effective fracture mechanics
parameters, such as J-integrals and stress intensity factors. Crack
propagation angles were calculated as well. Two-dimensional
fracture analysis of the first compression ring has been developed in
this paper using ABAQUS CAE6.5-1 software. Moreover, SEM
fractography was developed on fracture surfaces and is discussed in
this paper. Results of numerical calculations constitute the basis for
further research on real object.
Abstract: In this work, we consider the rational points on elliptic
curves over finite fields Fp. We give results concerning the number
of points Np,a on the elliptic curve y2 ≡ x3 +a3(mod p) according
to whether a and x are quadratic residues or non-residues. We use
two lemmas to prove the main results first of which gives the list of
primes for which -1 is a quadratic residue, and the second is a result
from [1]. We get the results in the case where p is a prime congruent
to 5 modulo 6, while when p is a prime congruent to 1 modulo 6,
there seems to be no regularity for Np,a.
Abstract: In the other to Study of drought stress and Selenium
spraying effect on superoxide dismotase (SOD) activity of rapeseed
(Brassica napus L.) cultivars in Shahr-e-Rey region, an experiment
carried out in Split factorial design in the basis of randomized
complete blocks with 4 replications in 2006. Irrigation in two levels:
Normal irrigation and irrigation with drought stress when the soil
electrical conductivity reached to 60 as main factor and rapeseed
cultivars in 3 levels Zarfam, Okapi, Opera and selenium spraying at
the beginning of flowering stage in 3 levels: 0, 16 and 21 g/ha as sub
factor.
The results showed that the simple and interaction effect of
irrigation, selenium and cultivars on SOD activity had significant
difference. In this case Zarfam cultivar with 2010 u.mg-1 protein and
Opera with 1454 u.mg-1 protein produced maximum and minimum
amounts of SOD activitiy. Interaction effect of irrigation and variety
showed that, normal irrigation in Opera with 1115 u.mg-1 protein
and drought stress in Zarfam with 2784 u.mg-1 protein conducted to
and minimum and maximum amounts of SOD activity.
Interaction effect of irrigation, cultivar and selenium on SOD
indicated that drought stress condition and 21 gr/ha selenium
spraying in Zarfam variety with 3146 u.mg-1 protein gained to
highest activities of SOD.
Abstract: Y chromosome microdeletions are the most common
genetic cause of male infertility and screening for these
microdeletions in azoospermic or severely oligospermic men is now
standard practice. Analysis of the Y chromosome in men with
azoospermia or severe oligozoospermia has resulted in the
identification of three regions in the euchromatic part of the long arm
of the human Y chromosome (Yq11) that are frequently deleted in
men with otherwise unexplained spermatogenic failure. PCR analysis
of microdeletions in the AZFa, AZFb and AZFc regions of the
human Y chromosome is an important screening tool. The aim of this
study was to analyse the type of microdeletions in men with fertility
disorders in Slovakia. We evaluated 227 patients with azoospermia
and with normal karyotype. All patient samples were analyzed
cytogenetically. For PCR amplification of sequence-tagged sites
(STS) of the AZFa, AZFb and AZFc regions of the Y chromosome
was used Devyser AZF set. Fluorescently labeled primers for all
markers in one multiplex PCR reaction were used and for automated
visualization and identification of the STS markers we used genetic
analyzer ABi 3500xl (Life Technologies). We reported 13 cases of
deletions in the AZF region 5,73%. Particular types of deletions were
recorded in each region AZFa,b,c .The presence of microdeletions in
the AZFc region was the most frequent. The study confirmed that
percentage of microdeletions in the AZF region is low in Slovak
azoospermic patients, but important from a prognostic view.
Abstract: Mining tailings represent a generating source of rich heavy metal material with a potential danger the public health and the environment, since these metals, under certain conditions, can leach and contaminate aqueous systems that serve like supplying potable water sources. The strategy for this work is based on the observation, experimentation and the simulation that can be obtained by binding real answers of the hydrodynamic behavior of metals leached from mining tailings, and the applied mathematics that provides the logical structure to decipher the individual effects of the general physicochemical phenomenon. The case of study presented herein focuses on mining tailings deposits located in Monte San Nicolas, Guanajuato, Mexico, an abandoned mine. This was considered the contamination source that under certain physicochemical conditions can favor the metal leaching, and its transport towards aqueous systems. In addition, the cartography, meteorology, geology and the hydrodynamics and hydrological characteristics of the place, will be helpful in determining the way and the time in which these systems can interact. Preliminary results demonstrated that arsenic presents a great mobility, since this one was identified in several superficial aqueous systems of the micro watershed, as well as in sediments in concentrations that exceed the established maximum limits in the official norms. Also variations in pH and potential oxide-reduction were registered, conditions that favor the presence of different species from this element its solubility and therefore its mobility.
Abstract: This paper describes a method to measure and
compensate a 4 axes ultra-precision machine tool that generates micro
patterns on the large surfaces. The grooving machine is usually used
for making a micro mold for many electrical parts such as a light guide
plate for LCD and fuel cells. The ultra precision machine tool has three
linear axes and one rotational table. Shaping is usually used to
generate micro patterns. In the case of 50 μm pitch and 25 μm height
pyramid pattern machining with a 90° wedge angle bite, one of linear
axis is used for long stroke motion for high cutting speed and other
linear axis are used for feeding. The triangular patterns can be
generated with many times of long stroke of one axis. Then 90°
rotation of work piece is needed to make pyramid patterns with
superposition of machined two triangular patterns.
To make a two dimensional positioning error, straightness of two
axes in out of plane, squareness between the each axis are important.
Positioning errors, straightness and squarness were measured by laser
interferometer system. Those were compensated and confirmed by
ISO230-6. One of difficult problem to measure the error motions is
squareness or parallelism of axis between the rotational table and
linear axis. It was investigated by simultaneous moving of rotary table
and XY axes. This compensation method is introduced in this paper.
Abstract: The problem of robust disturbance rejection (RDR) using a proportional state feedback controller is studied for the case of Left Invertible MIMO generalized state space linear systems with nonlinear uncertain structure. Sufficient conditions for the problem to have a solution are established. The set of all proportional feedback controllers solving the problem subject to these conditions is analytically determined.
Abstract: In 1990 [1] the subband-DFT (SB-DFT) technique was proposed. This technique used the Hadamard filters in the decomposition step to split the input sequence into low- and highpass sequences. In the next step, either two DFTs are needed on both bands to compute the full-band DFT or one DFT on one of the two bands to compute an approximate DFT. A combination network with correction factors was to be applied after the DFTs. Another approach was proposed in 1997 [2] for using a special discrete wavelet transform (DWT) to compute the discrete Fourier transform (DFT). In the first step of the algorithm, the input sequence is decomposed in a similar manner to the SB-DFT into two sequences using wavelet decomposition with Haar filters. The second step is to perform DFTs on both bands to obtain the full-band DFT or to obtain a fast approximate DFT by implementing pruning at both input and output sides. In this paper, the wavelet-based DFT (W-DFT) with Haar filters is interpreted as SB-DFT with Hadamard filters. The only difference is in a constant factor in the combination network. This result is very important to complete the analysis of the W-DFT, since all the results concerning the accuracy and approximation errors in the SB-DFT are applicable. An application example in spectral analysis is given for both SB-DFT and W-DFT (with different filters). The adaptive capability of the SB-DFT is included in the W-DFT algorithm to select the band of most energy as the band to be computed. Finally, the W-DFT is extended to the two-dimensional case. An application in image transformation is given using two different types of wavelet filters.
Abstract: One of the main research directions in CAD/CAM
machining area is the reducing of machining time.
The feedrate scheduling is one of the advanced techniques that
allows keeping constant the uncut chip area and as sequel to keep
constant the main cutting force. They are two main ways for feedrate
optimization. The first consists in the cutting force monitoring, which
presumes to use complex equipment for the force measurement and
after this, to set the feedrate regarding the cutting force variation. The
second way is to optimize the feedrate by keeping constant the
material removal rate regarding the cutting conditions.
In this paper there is proposed a new approach using an extended
database that replaces the system model.
The feedrate scheduling is determined based on the identification
of the reconfigurable machine tool, and the feed value determination
regarding the uncut chip section area, the contact length between tool
and blank and also regarding the geometrical roughness.
The first stage consists in the blank and tool monitoring for the
determination of actual profiles. The next stage is the determination
of programmed tool path that allows obtaining the piece target
profile.
The graphic representation environment models the tool and blank
regions and, after this, the tool model is positioned regarding the
blank model according to the programmed tool path. For each of
these positions the geometrical roughness value, the uncut chip area
and the contact length between tool and blank are calculated. Each of
these parameters are compared with the admissible values and
according to the result the feed value is established.
We can consider that this approach has the following advantages:
in case of complex cutting processes the prediction of cutting force is
possible; there is considered the real cutting profile which has
deviations from the theoretical profile; the blank-tool contact length
limitation is possible; it is possible to correct the programmed tool
path so that the target profile can be obtained.
Applying this method, there are obtained data sets which allow the
feedrate scheduling so that the uncut chip area is constant and, as a
result, the cutting force is constant, which allows to use more
efficiently the machine tool and to obtain the reduction of machining
time.
Abstract: This paper proposes a new technique for improving
the efficiency of software testing, which is based on a conventional
attempt to reduce test cases that have to be tested for any given
software. The approach utilizes the advantage of Regression Testing
where fewer test cases would lessen time consumption of the testing
as a whole. The technique also offers a means to perform test case
generation automatically. Compared to one of the techniques in the
literature where the tester has no option but to perform the test case
generation manually, the proposed technique provides a better
option. As for the test cases reduction, the technique uses simple
algebraic conditions to assign fixed values to variables (Maximum,
minimum and constant variables). By doing this, the variables values
would be limited within a definite range, resulting in fewer numbers
of possible test cases to process. The technique can also be used in
program loops and arrays.
Abstract: This paper deals with the current space-vector
decomposition in three-phase, three-wire systems on the basis of
some case studies. We propose four components of the current spacevector
in terms of DC and AC components of the instantaneous
active and reactive powers. The term of supplementary useless
current vector is also pointed out. The analysis shows that the current
decomposition which respects the definition of the instantaneous
apparent power vector is useful for compensation reasons only if the
supply voltages are sinusoidal. A modified definition of the
components of the current is proposed for the operation under
nonsinusoidal voltage conditions.
Abstract: Hopfield model of associative memory is studied in this work. In particular, two main problems that it possesses: the apparition of spurious patterns in the learning phase, implying the well-known effect of storing the opposite pattern, and the problem of its reduced capacity, meaning that it is not possible to store a great amount of patterns without increasing the error probability in the retrieving phase. In this paper, a method to avoid spurious patterns is presented and studied, and an explanation of the previously mentioned effect is given. Another technique to increase the capacity of a network is proposed here, based on the idea of using several reference points when storing patterns. It is studied in depth, and an explicit formula for the capacity of the network with this technique is provided.
Abstract: In this paper we have developed a FDTD simulation
code which can treat wave propagation of a monopole antenna in a
metallic case which covers with PML, and performed a series of three
dimensional FDTD simulations of electromagnetic wave propagation
in this space .We also provide a measurement set up in antenna lab
and fortunately the simulations and measurements show good
agreement. According to simulation and measurement results, we
confirmed that the computer program which had been written in
FORTRAN, works correctly.