Abstract: This paper presents a numerical investigation of the
unsteady flow around an American 19th century vertical-axis
windmill: the Stevens & Jolly rotor, patented on April 16, 1895. The
computational approach used is based on solving the complete
transient Reynolds-Averaged Navier-Stokes (t-RANS) equations: a
full campaign of numerical simulation has been performed using the
k-ω SST turbulence model. Flow field characteristics have been
investigated for several values of tip speed ratio and for a constant
unperturbed free-stream wind velocity of 6 m/s, enabling the study of
some unsteady flow phenomena in the rotor wake. Finally, the global
power generated from the windmill has been determined for each
simulated angular velocity, allowing the calculation of the rotor
power-curve.
Abstract: Martingale model diagnostic for assessing the fit of logistic regression model to recurrent events data are studied. One way of assessing the fit is by plotting the empirical standard deviation of the standardized martingale residual processes. Here we used another diagnostic plot based on martingale residual covariance. We investigated the plot performance under several types of model misspecification. Clearly the method has correctly picked up the wrong model. Also we present a test statistic that supplement the inspection of the two diagnostic. The test statistic power agrees with what we have seen in the plots of the estimated martingale covariance.
Abstract: Parallel Prefix addition is a technique for improving
the speed of binary addition. Due to continuing integrating intensity
and the growing needs of portable devices, low-power and highperformance
designs are of prime importance. The classical parallel
prefix adder structures presented in the literature over the years
optimize for logic depth, area, fan-out and interconnect count of logic
circuits. In this paper, a new architecture for performing 8-bit, 16-bit
and 32-bit Parallel Prefix addition is proposed. The proposed prefix
adder structures is compared with several classical adders of same
bit width in terms of power, delay and number of computational
nodes. The results reveal that the proposed structures have the least
power delay product when compared with its peer existing Prefix
adder structures. Tanner EDA tool was used for simulating the adder
designs in the TSMC 180 nm and TSMC 130 nm technologies.
Abstract: At any point of time, a power system operating
condition should be stable, meeting various operational criteria and it
should also be secure in the event of any credible contingency. Present
day power systems are being operated closer to their stability limits
due to economic and environmental constraints. Maintaining a stable
and secure operation of a power system is therefore a very important
and challenging issue. Voltage instability has been given much
attention by power system researchers and planners in recent years,
and is being regarded as one of the major sources of power system
insecurity. Voltage instability phenomena are the ones in which the
receiving end voltage decreases well below its normal value and does
not come back even after setting restoring mechanisms such as VAR
compensators, or continues to oscillate for lack of damping against the
disturbances. Reactive power limit of power system is one of the major
causes of voltage instability. This paper investigates the effects of
coordinated series capacitors (SC) with static VAR compensators
(SVC) on steady-state voltage stability of a power system. Also, the
influence of the presence of series capacitor on static VAR
compensator controller parameters and ratings required to stabilize
load voltages at certain values are highlighted.
Abstract: Space Vector Pulse Width Modulation SVPWM is
one of the most used techniques to generate sinusoidal voltage and
current due to its facility and efficiency with low harmonics
distortion. This algorithm is specially used in power electronic
applications. This paper describes simulation algorithm of SVPWM
& SPWM using MatLab/simulink environment. It also implements a
closed loop three phases DC-AC converter controlling its outputs
voltages amplitude and frequency using MatLab. Also comparison
between SVPWM & SPWM results is given.
Abstract: The city of Suceava, one of the most important
medieval capital of Moldova, owes its urban genesis to the power
center established in its territory at the turn of the thirteenth and
fourteenth centuries. Freed from the effective control exercised by
the Emir Nogai through Alanians, the local center of power evolved
as the main representative of the interests of indigenous people in
relation to the Hungarian Angevin dinasty and to their
representatives from Maramures. From this perspective, the political
and military role of the settlement of Suceava was archeologically
proved by the discovery of extensive fortifications, unrivaled in the
first half of the XIVth century-s Moldavia. At the end of that century,
voivod Peter I decides to move the capital of the state from Siret to
Suceava. That option stimulated the development of the settlement
on specific urban coordinates.
Abstract: The bioassay-guided isolation and purification of an
ethyl acetate extract of Aspergillus terreus MC751 led to the
characterization of butyrolactone I as an antidiabetic and antioxidant.
The antidiabetic activity of butyrolactone I was evaluated by α-
glucosidase and α-amylase inhibition assays. Butyrolactone I
demonstrated significant concentration-dependent, mixed-type
inhibitory activity against yeast α-glucosidase with an IC50 of 54μM.
However, the compound exhibited less activity against rat intestinal
α-glucosidase and α-amylase. This is the first report on α-glucosidase
inhibitory activity of butyrolactone I. The antioxidative activity of
butyrolactone I was evaluated based on scavenging effects on 1,1-
diphenyl-2-picrylhydrazyl (DPPH) (IC50 =51 μM) and hydrogen
peroxide (IC50= 141 μM) radicals as well as a reducing power assay.
The results suggest that butyrolactone I is a promising antidiabetic as
well as antioxidant and should be considered for clinical trials.
Abstract: The most widely used semiconductor memory types
are the Dynamic Random Access Memory (DRAM) and Static
Random Access memory (SRAM). Competition among memory
manufacturers drives the need to decrease power consumption and
reduce the probability of read failure. A technology that is relatively
new and has not been explored is the FinFET technology. In this
paper, a single cell Schmitt Trigger Based Static RAM using FinFET
technology is proposed and analyzed. The accuracy of the result is
validated by means of HSPICE simulations with 32nm FinFET
technology and the results are then compared with 6T SRAM using
the same technology.
Abstract: With constraints on data availability and for study of power system stability it is adequate to model the synchronous generator with field circuit and one equivalent damper on q-axis known as the model 1.1. This paper presents a systematic procedure for modelling and simulation of a single-machine infinite-bus power system installed with a thyristor controlled series compensator (TCSC) where the synchronous generator is represented by model 1.1, so that impact of TCSC on power system stability can be more reasonably evaluated. The model of the example power system is developed using MATLAB/SIMULINK which can be can be used for teaching the power system stability phenomena, and also for research works especially to develop generator controllers using advanced technologies. Further, the parameters of the TCSC controller are optimized using genetic algorithm. The non-linear simulation results are presented to validate the effectiveness of the proposed approach.
Abstract: During the last few decades in the academic field, the
debate has increased on the effects of social geography on the
opportunities of socioeconomic integration. On one hand, it has been
discussed how the contents of the urban structure and social
geography affect not only the way people interact, but also their
chances of social and economic integration. On the other hand, it has
also been discussed how the urban structure is also constrained and
transformed by the action of social actors. Without questioning the
powerful influence of structural factors, related to the logic of the
production system, labor markets, education and training, the
research has shown the role played by place of residence in shaping
individual outcomes such as unemployment. In the context of this
debate the importance of territory of residence with respect to the
problem of unemployment has been highlighted.
Although statistics of unemployment have already demonstrated
the unequal incidence of the phenomenon in social groups, the issue
of uneven territorial impact on the phenomenon at intra-urban level
remains relatively unknown.
The purpose of this article is to show and to interpret the spatial
patterns of unemployment in the city of Porto using GIS (Geographic
Information System - GIS) technology. Under this analysis the
overlap of the spatial patterns of unemployment with the spatial
distribution of social housing, allows the discussion of the
relationship that occurs between these patterns and the reasons that
might explain the relative immutability of socioeconomic problems in
some neighborhoods.
Abstract: The objective of this paper is to present a research
study of the convectors that are used for heating or cooling of the
living room or industrial halls. The key points are experimental
measurement and comprehensive numerical simulation of the flow
coming throughout the part of the convector such as heat exchanger,
input from the fan etc.. From the obtained results, the components of
the convector are optimized in sense to increase thermal power
efficiency due to improvement of heat convection or reduction of air
drag friction. Both optimized aspects are leading to the more
effective service conditions and to energy saving. The significant part
of the convector research is a design of the unique measurement
laboratory and adopting measure techniques. The new laboratory
provides possibility to measure thermal power efficiency and other
relevant parameters under specific service conditions of the
convectors.
Abstract: Variations in the growth rate constant of the Listeria
monocytogenes bacterial species were determined at 37°C in
irradiated environments and compared to the situation of a nonirradiated
environment. The bacteria cells, contained in a suspension
made of a nutrient solution of Brain Heart Infusion, were made to
grow at different frequency (2.30e2.60 GHz) and power (0e400
mW) values, in a plug flow reactor positioned in the irradiated
environment. Then the reacting suspension was made to pass into a
cylindrical cuvette where its optical density was read every 2.5
minutes at a wavelength of 600 nm. The obtained experimental data
of optical density vs. time allowed the bacterial growth rate constant
to be derived; this was found to be slightly influenced by microwave
power, but not by microwave frequency; in particular, a minimum
value was found for powers in the 50e150 mW field.
Abstract: Today global warming, climate change and energy supply are of greater concern as it is widely realized that the planet earth does not provide an infinite capacity for absorbing human industrialization in the 21st century. The aim of this paper is to analyze upstream and downstream electricity production in selected case studies: a coal power plant, a pump system and a microwave oven covering and consumption to explore the position of energy efficiency in engineering sustainability. Collectively, the analysis presents energy efficiency as a major pathway towards sustainability that requires an inclusive and a holistic supply chain response in the engineering design process.
Abstract: In literatures, many researches proposed various
methods to reduce PAPR (Peak to Average Power Ratio). Among
those, DSI (Dummy Sequence Insertion) is one of the most attractive
methods for WiMAX systems because it does not require side
information transmitted along with user data. However, the
conventional DSI methods find dummy sequence by performing an
iterative procedure until achieving PAPR under a desired threshold.
This causes a significant delay on finding dummy sequence and also
effects to the overall performances in WiMAX systems. In this paper,
the new method based on DSI is proposed by finding dummy
sequence without the need of iterative procedure. The fast DSI
method can reduce PAPR without either delays or required side
information. The simulation results confirm that the proposed method
is able to carry out PAPR performances as similar to the other
methods without any delays. In addition, the simulations of WiMAX
system with adaptive modulations are also investigated to realize the
use of proposed methods on various fading schemes. The results
suggest the WiMAX designers to modify a new Signal to Noise Ratio
(SNR) criteria for adaptation.
Abstract: This research investigates the factors that influence moral judgments when dealing with ethical dilemmas in the organizational context. It also investigates the antecedents of individual ethical ideology (idealism and relativism). A mixed method study, which combines qualitative (field study) and quantitative (survey) approaches, was used in this study. An initial model was developed first, which was then fine-tuned based on field studies. Data were collected from managers in Malaysian large organizations. The results of this study reveal that in-group collectivism culture, power distance culture, parental values, and religiosity were significant as antecedents of ethical ideology. However, direct effects of these variables on moral judgment were not significant. Furthermore, the results of this study confirm the significant effects of ethical ideology on moral judgment. This study provides valuable insight into evaluating the validity of existing theory as proposed in the literature and offers significant practical implications.
Abstract: Fully customized hardware based technology provides high performance and low power consumption by specializing the tasks in hardware but lacks design flexibility since any kind of changes require re-design and re-fabrication. Software based solutions operate with software instructions due to which a great flexibility is achieved from the easy development and maintenance of the software code. But this execution of instructions introduces a high overhead in performance and area consumption. In past few decades the reconfigurable computing domain has been introduced which overcomes the traditional trades-off between flexibility and performance and is able to achieve high performance while maintaining a good flexibility. The dramatic gains in terms of chip performance and design flexibility achieved through the reconfigurable computing systems are greatly dependent on the design of their computational units being integrated with reconfigurable logic resources. The computational unit of any reconfigurable system plays vital role in defining its strength. In this research paper an RFU based computational unit design has been presented using the tightly coupled, multi-threaded reconfigurable cores. The proposed design has been simulated for VLIW based architectures and a high gain in performance has been observed as compared to the conventional computing systems.
Abstract: Coal fly ash (CFA) generated by coal-based thermal
power plants is mainly composed of quartz, mullite, and unburned
carbon. In this study, the effect of unburned carbon on CFA toward
its adsorption capacity was investigated. CFA with various carbon
content was obtained by refluxing it with sulfuric acid having various
concentration at various temperature and reflux time, by heating at
400-800°C, and by sieving into 100-mesh in particle size. To
evaluate the effect of unburned carbon on CFA toward its adsorption
capacity, adsorption of methyl violet solution with treated CFA was
carried out. The research shows that unburned carbon leads to
adsorption capacity decrease. The highest adsorption capacity of
treated CFA was found 5.73 x 10-4mol.g-1.
Abstract: High Speed PM Generators driven by micro-turbines
are widely used in Smart Grid System. So, this paper proposes
comparative study among six classical, optimized and genetic
analytical design cases for 400 kW output power at tip speed 200
m/s. These six design trials of High Speed Permanent Magnet
Synchronous Generators (HSPMSGs) are: Classical Sizing;
Unconstrained optimization for total losses and its minimization;
Constrained optimized total mass with bounded constraints are
introduced in the problem formulation. Then a genetic algorithm is
formulated for obtaining maximum efficiency and minimizing
machine size. In the second genetic problem formulation, we attempt
to obtain minimum mass, the machine sizing that is constrained by
the non-linear constraint function of machine losses. Finally, an
optimum torque per ampere genetic sizing is predicted. All results are
simulated with MATLAB, Optimization Toolbox and its Genetic
Algorithm. Finally, six analytical design examples comparisons are
introduced with study of machines waveforms, THD and rotor losses.
Abstract: The analytical solution of functionally graded
piezoelectric hollow cylinder which is under radial electric potential
and non-axisymmetric thermo-mechanical loads, are presented in this
paper. Using complex Fourier series and estimation of power law for
variations of material characterizations through the thickness, the
electro thermo mechanical behavior of the FGPM cylinder is
obtained. The stress and displacement distributions and the effect of
electric potential field on the cylinder behavior are also presented and
some applicable results are offered at the end of the paper.
Abstract: In the context of sensor networks, where every few
dB saving counts, the novel node cooperation schemes are reviewed
where MIMO techniques play a leading role. These methods could be
treated as joint approach for designing physical layer of their
communication scenarios. Then we analyzed the BER performance
of transmission diversity schemes under a general fading channel
model and proposed a power allocation strategy to the transmitting
sensor nodes. This approach is then compared to an equal-power
assignment method and its performance enhancement is verified by
the simulation. Another key point of the contribution lies in the
combination of optimal power allocation and sensor nodes-
cooperation in a transmission diversity regime (MISO). Numerical
results are given through figures to demonstrate the optimality and
efficiency of proposed combined approach.