Abstract: Post-disaster reconstruction projects offer
opportunities to facilitate physical, social and economic development
and to reduce future hazard vulnerability long after the disasters.
Sustainability of post-disaster reconstruction project conducted in the
villages of Dinar following the 1995 earthquake was investigated in
this paper. Officials of the Government who were involved in the
project were interviewed. Besides, two field surveys were done in 12
villages of Dinar in winter months of 2008. Beneficiaries were
interviewed and physical, socio-cultural and economic impacts of the
reconstruction were examined. The research revealed that the postdisaster
reconstruction project has negative aspects from the point
view of sustainability. The physical, socio-cultural and economic
factors were not considered during decision making process of the
project.
Abstract: In-situ chemical oxidation (ISCO) has been widely
used for source zone remediation of Dense Nonaqueous Phase
Liquids (DNAPLs) in subsurface environments. DNAPL source
zones for karst aquifers are generally located in epikarst where the
DNAPL mass is trapped either in karst soil or at the regolith contact
with carbonate bedrock. This study aims to investigate the
performance of oxidation of residual trichloroethylene found in such
environments by potassium permanganate. Batch and flow cell
experiments were conducted to determine the kinetics and the mass
removal rate of TCE. pH change, Cl production, TCE and MnO4
destruction were monitored routinely during experiments. Nonreactive
tracer tests were also conducted prior and after the oxidation
process to determine the influence of oxidation on flow conditions.
The results show that oxidant consumption rate of the calcareous
epikarst soil was significant and the oxidant demand was determined
to be 20 g KMnO4/kg soil. Oxidation rate of residual TCE (1.26x10-3
s-1) was faster than the oxidant consumption rate of the soil (2.54 -
2.92x10-4 s-1) at only high oxidant concentrations (> 40 mM
KMnO4). Half life of TCE oxidation ranged from 7.9 to 10.7 min.
Although highly significant fraction of residual TCE mass in the
system was destroyed by permanganate oxidation, TCE
concentration in the effluent remained above its MCL. Flow
interruption tests indicate that efficiency of ISCO was limited by the
rate of TCE dissolution and the rate-limited desorption of TCE. The
residence time and the initial concentration of the oxidant in the
source zone also controlled the efficiency of ISCO in epikarst.
Abstract: The Beshar River is one of the most important aquatic ecosystems in the upstream of the Karun watershed in south of Iran which is affected by point and non point pollutant sources . This study was done in order to evaluate the effects of pollutants activities on the water quality of the Beshar river and its aquatic ecosystems. This river is approximately 190 km in length and situated at the geographical positions of 51° 20´ to 51° 48´ E and 30° 18´ to 30° 52´ N it is one of the most important aquatic ecosystems of Kohkiloye and Boyerahmad province in south-west Iran. In this research project, five study stations were selected to examine water pollution in the Beshar River systems. Human activity is now one of the most important factors affecting on hydrology and water quality of the Beshar river. Humans use large amounts of resources to sustain various standards of living, although measures of sustainability are highly variable depending on how sustainability is defined. The Beshar river ecosystems are particularly sensitive and vulnerable to human activities. Therefore, to determine the impact of human activities on the Beshar River, the most important water quality parameters such as pH, dissolve oxygen (DO), Biological Oxygen Demand (BOD5), Total Dissolve Solids (TDS), Nitrates (NO3-N) and Phosphates (PO4) were estimated at the five stations. As the results show, the most important pollution index parameters such as BOD5, NO3 and PO4 increase and DO and pH decrease according to human activities (P
Abstract: Studies in economics domain tried to reveal the correlation between stock markets. Since the globalization era, interdependence between stock markets becomes more obvious. The Dynamic Interaction Network (DIN) algorithm, which was inspired by a Gene Regulatory Network (GRN) extraction method in the bioinformatics field, is applied to reveal important and complex dynamic relationship between stock markets. We use the data of the stock market indices from eight countries around the world in this study. Our results conclude that DIN is able to reveal and model patterns of dynamic interaction from the observed variables (i.e. stock market indices). Furthermore, it is also found that the extracted network models can be utilized to predict movement of the stock market indices with a considerably good accuracy.
Abstract: Although the Vietnamese catfish farming has grown
at very high rates in recent years, the industry has also faced many
problems affecting its sustainability. This paper studies the
perceptions of catfish farmers regarding risk and risk management
strategies in their production activities. Specifically, the study aims
to measure the consequences, likelihoods, and levels of risks as well
as the efficacy of risk management in Vietnamese catfish farming.
Data for the study were collected through a sample of 261 catfish
farmers in the Mekong Delta, Vietnam using a questionnaire survey
in 2008. Results show that, in general, price and production risks
were perceived as the most important risks. Farm management and
technical measures were perceived more effective than other kinds of
risk management strategies in risk reduction. Although price risks
were rated as important risks, price risk management strategies were
not perceived as important measures for risk mitigation. The results
of the study are discussed to provide implications for various
industry stakeholders, including policy makers, processors, advisors,
and developers of new risk management strategies.
Abstract: An exploration in the competency of the optical
multilevel Mapping Multiplexing Technique (MMT) system in
tolerating to the impact of nonlinearities as Self Phase Modulation
(SPM) during the presence of dispersion compensation methods. The
existence of high energy pulses stimulates deterioration in the chirp
compression process attained by SPM which introduces an upper
power boundary limit. An evaluation of the post and asymmetric prepost
fiber compensation methods have been deployed on the MMT
system compared with others of the same bit rate modulation formats.
The MMT 40 Gb/s post compensation system has 1.4 dB
enhancements to the 40 Gb/s 4-Arysystem and less than 3.9 dB
penalty compared to the 40 Gb/s OOK-RZsystem. However, the
optimized Pre-Post asymmetric compensation has an enhancement of
4.6 dB compared to the Post compensation MMT configuration for a
30% pre compensation dispersion.
Abstract: A SCADA (Supervisory Control And Data
Acquisition) system is an industrial control and monitoring system for
national infrastructures. The SCADA systems were used in a closed
environment without considering about security functionality in the
past. As communication technology develops, they try to connect the
SCADA systems to an open network. Therefore, the security of the
SCADA systems has been an issue. The study of key management for
SCADA system also has been performed. However, existing key
management schemes for SCADA system such as SKE(Key
establishment for SCADA systems) and SKMA(Key management
scheme for SCADA systems) cannot support broadcasting
communication. To solve this problem, an Advanced Key
Management Architecture for Secure SCADA Communication has
been proposed by Choi et al.. Choi et al.-s scheme also has a problem
that it requires lots of computational cost for multicasting
communication. In this paper, we propose an enhanced scheme which
improving computational cost for multicasting communication with
considering the number of keys to be stored in a low power
communication device (RTU).
Abstract: Although electrical motors are still the main devices
used in vehicular exhaust comprises more than 95 percent of the air
pollution in Taiwan's largest city, Taipei. On average, all commuters in Taipei travel 13.6 km daily, while motorcycle commuters travel 12.2 km. The convenience and mobility of motorcycles makes them
irreplaceable in Taiwan city traffic but they add significantly to air pollution problems. In order to improve air pollution conditions, some
new types of vehicles have been proposed, such as fuel cell driven and
hybrid energy vehicles. In this study, we develop a model pneumatic hybrid motorcycle system and simulate its acceleration and mileage
(km/L) performance. The results show that the pneumatic hybrid
motorcycle can improve efficiency.
Abstract: Data mining has been used very frequently to extract
hidden information from large databases. This paper suggests the use
of decision trees for continuously extracting the clinical reasoning in
the form of medical expert-s actions that is inherent in large number
of EMRs (Electronic Medical records). In this way the extracted data
could be used to teach students of oral medicine a number of orderly
processes for dealing with patients who represent with different
problems within the practice context over time.
Abstract: In this paper, we propose a Connect6 solver which
adopts a hybrid approach based on a tree-search algorithm and image
processing techniques. The solver must deal with the complicated
computation and provide high performance in order to make real-time
decisions. The proposed approach enables the solver to be
implemented on a single Spartan-6 XC6SLX45 FPGA produced by
XILINX without using any external devices. The compact
implementation is achieved through image processing techniques to
optimize a tree-search algorithm of the Connect6 game. The tree
search is widely used in computer games and the optimal search brings
the best move in every turn of a computer game. Thus, many
tree-search algorithms such as Minimax algorithm and artificial
intelligence approaches have been widely proposed in this field.
However, there is one fundamental problem in this area; the
computation time increases rapidly in response to the growth of the
game tree. It means the larger the game tree is, the bigger the circuit
size is because of their highly parallel computation characteristics.
Here, this paper aims to reduce the size of a Connect6 game tree using
image processing techniques and its position symmetric property. The
proposed solver is composed of four computational modules: a
two-dimensional checkmate strategy checker, a template matching
module, a skilful-line predictor, and a next-move selector. These
modules work well together in selecting next moves from some
candidates and the total amount of their circuits is small. The details of
the hardware design for an FPGA implementation are described and
the performance of this design is also shown in this paper.
Abstract: The complex shape of the human pelvic bone was
successfully imaged and modeled using finite element FE processing.
The bone was subjected to quasi-static and dynamic loading
conditions simulating the effect of both weight gain and impact.
Loads varying between 500 – 2500 N (~50 – 250 Kg of weight) was
used to simulate 3D quasi-static weight gain. Two different 3D
dynamic analyses, body free fall at two different heights (1 and 2 m)
and forced side impact at two different velocities (20 and 40 Km/hr)
were also studied. The computed resulted stresses were compared for
the four loading cases, where Von Misses stresses increases linearly
with the weight gain increase under quasi-static loading. For the
dynamic models, the Von Misses stress history behaviors were
studied for the affected area and effected load with respect to time.
The normalization Von Misses stresses with respect to the applied
load were used for comparing the free fall and the forced impact load
results. It was found that under the forced impact loading condition
an over lapping behavior was noticed, where as for the free fall the
normalized Von Misses stresses behavior was found to nonlinearly
different. This phenomenon was explained through the energy
dissipation concept. This study will help designers in different
specialization in defining the weakest spots for designing different
supporting systems.
Abstract: In recent decade's tourism industry is one of main
reasons of the social and economical development for many
countries; so these countries try to gain more portion of it for
themselves. The excessive natural and cultural touristy potentialities
in Iran made this country to be one of the most attractive sightseeing
areas, although; Iran has got the lowest rate of tourists. Khark Island
is about 32 km. It is a beautiful coral reef coast; about 98% of oil
export has been done through this place. The ecotourism
potentialities of Khark and Kharko Islands (about 3.7km far from
Khark) are the reason to consider ecotourism and the main activity in
these islands which is exporting oil at the same time. This article
refers to way of measuring the geographical coordination of the
place, and the potentialities, ecotourism attraction of the islands and
introduces some ideas in order to expand tourism in the islands.
Abstract: The information on the Web increases tremendously.
A number of search engines have been developed for searching Web
information and retrieving relevant documents that satisfy the
inquirers needs. Search engines provide inquirers irrelevant
documents among search results, since the search is text-based rather
than semantic-based. Information retrieval research area has
presented a number of approaches and methodologies such as
profiling, feedback, query modification, human-computer interaction,
etc for improving search results. Moreover, information retrieval has
employed artificial intelligence techniques and strategies such as
machine learning heuristics, tuning mechanisms, user and system
vocabularies, logical theory, etc for capturing user's preferences and
using them for guiding the search based on the semantic analysis
rather than syntactic analysis. Although a valuable improvement has
been recorded on search results, the survey has shown that still
search engines users are not really satisfied with their search results.
Using ontologies for semantic-based searching is likely the key
solution. Adopting profiling approach and using ontology base
characteristics, this work proposes a strategy for finding the exact
meaning of the query terms in order to retrieve relevant information
according to user needs. The evaluation of conducted experiments
has shown the effectiveness of the suggested methodology and
conclusion is presented.
Abstract: In the present paper, Fatigue life assessment of an
anti-roll bar component of a passenger vehicle, is investigated by
ANSYS 11 software. A stress analysis is also carried out by the
finite element technique for the determination of highly stressed
regions on the bar. Anti-roll bar is a suspension element used at the
front, rear, or at both ends of a car that reduces body roll by resisting
any unequal vertical motion between the pair of wheels to which it is
connected. As a first stage, fatigue damage models proposed by some
well-known references and the corresponding assumptions are
discussed and some enhancements are proposed. Then, fracture
analysis of an anti-roll bar of an automobile is carried out. The
analysed type of the anti-roll bar is especially important as many
cases are reported about the fracture after a 100,000 km of travel
fatigue and fracture conditions. This paper demonstrates fatigue life
of an anti-roll bar and then evaluated by experimental analytically
results from other researcher.
Abstract: A numerical study of flow in a horizontally channel
partially filled with a porous screen with non-uniform inlet has been
performed by lattice Boltzmann method (LBM). The flow in porous
layer has been simulated by the Brinkman-Forchheimer model.
Numerical solutions have been obtained for variable porosity models
and the effects of Darcy number and porosity have been studied in
detail. It is found that the flow stabilization is reliant on the Darcy
number. Also the results show that the stabilization of flow field and
heat transfer is depended to Darcy number. Distribution of stream
field becomes more stable by decreasing Darcy number. Results
illustrate that the effect of variable porosity is significant just in the
region of the solid boundary. In addition, difference between constant
and variable porosity models is decreased by decreasing the Darcy
number.
Abstract: The efficient knowledge management system (KMS)
is one of the important strategies to help firms to achieve sustainable
competitive advantages, but little research has been conducted to
understand what contributes to the KMS success. This study thus set
to investigate the determinants of KMS success in the context of Thai
banking industry. A questionnaire survey was conducted in four
major Thai Banks to test the proposed KMS Success model.
The result of this study shows that KMS use and user satisfaction
relate significantly to the success of KMS, and knowledge quality,
service quality and trust lead to system use, and knowledge quality,
system quality and trust lead to user satisfaction. However, this
research focuses only on system and user-related factors. Future
research thus can extend to study factors such as management support
and organization readiness.
Abstract: The present work is a numerical simulation of
nanofluids flow in a double pipe heat exchanger provided with
porous baffles. The hot nanofluid flows in the inner cylinder, whereas
the cold nanofluid circulates in the annular gap. The Darcy-
Brinkman-Forchheimer model is adopted to describe the flow in the
porous regions, and the governing equations with the appropriate
boundary conditions are solved by the finite volume method. The
results reveal that the addition of metallic nanoparticles enhances the
rate of heat transfer in comparison to conventional fluids but this
augmentation is accompanied by an increase in pressure drop. The
highest heat exchanger performances are obtained when
nanoparticles are added only to the cold fluid.
Abstract: An automated wood recognition system is designed to
classify tropical wood species.The wood features are extracted based
on two feature extractors: Basic Grey Level Aura Matrix (BGLAM)
technique and statistical properties of pores distribution (SPPD)
technique. Due to the nonlinearity of the tropical wood species
separation boundaries, a pre classification stage is proposed which
consists ofKmeans clusteringand kernel discriminant analysis (KDA).
Finally, Linear Discriminant Analysis (LDA) classifier and KNearest
Neighbour (KNN) are implemented for comparison purposes.
The study involves comparison of the system with and without pre
classification using KNN classifier and LDA classifier.The results
show that the inclusion of the pre classification stage has improved
the accuracy of both the LDA and KNN classifiers by more than
12%.
Abstract: This study proposes a new recommender system based on the collaborative folksonomy. The purpose of the proposed system is to recommend Internet resources (such as books, articles, documents, pictures, audio and video) to users. The proposed method includes four steps: creating the user profile based on the tags, grouping the similar users into clusters using an agglomerative hierarchical clustering, finding similar resources based on the user-s past collections by using content-based filtering, and recommending similar items to the target user. This study examines the system-s performance for the dataset collected from “del.icio.us," which is a famous social bookmarking website. Experimental results show that the proposed tag-based collaborative and content-based filtering hybridized recommender system is promising and effectiveness in the folksonomy-based bookmarking website.
Abstract: Soursop (Anona muricata) is one of the underutilized tropical fruits containing nutrients, particularly dietary fibre and antioxidant properties that are beneficial to human health. This objective of this study is to investigate the feasibility of matured soursop pulp flour (SPF) to be substituted with high-protein wheat flour in bread. Bread formulation was substituted with different levels of SPF (0%, 5%, 10% and 15%). The effect on physicochemical properties and sensory attributes were evaluated. Higher substitution level of SPF resulted in significantly higher (p