Abstract: Managers as the key employees have a very important role in maintaining the workforce performance which is critical to the
construction companies- success in the future. If motivated employees start with motivated managers probably it would seem
plausible if the de-motivated ones start with de-motivated managers. This study aims to analyze the importance of motivated managers to
their successes and construction companies- successes. In this study,
a quantitative method was used and the study area was in Medan, North Sumatera. Questionnaire survey was distributed directly to
construction companies in Medan which are listed in the
Construction Services Development Board. A total of 60 managers responded and the completed questionnaires were analyzed using the
descriptive analysis. The results indicated that the respondents acknowledge the importance of motivation among themselves to the
projects and construction companies- success, implying that it is vital o maintain the motivation and good performance of the workforce.
Abstract: This paper describes a new algorithm of arrangement
in parallel, based on Odd-Even Mergesort, called division and
concurrent mixes. The main idea of the algorithm is to achieve that
each processor uses a sequential algorithm for ordering a part of the
vector, and after that, for making the processors work in pairs in
order to mix two of these sections ordered in a greater one, also
ordered; after several iterations, the vector will be completely
ordered. The paper describes the implementation of the new
algorithm on a Message Passing environment (such as MPI). Besides,
it compares the obtained experimental results with the quicksort
sequential algorithm and with the parallel implementations (also on
MPI) of the algorithms quicksort and bitonic sort. The comparison
has been realized in an 8 processors cluster under GNU/Linux which
is running on a unique PC processor.
Abstract: Identifying parameters in an epidemic model is one
of the important aspect of modeling. In this paper, we suggest a
method to identify the transmission rate by using the multistage
Adomian decomposition method. As a case study, we use the data of
the reported dengue fever cases in the city of Shah Alam, Malaysia.
The result obtained fairly represents the actual situation. However, in
the SIR model, this method serves as an alternative in parameter
identification and enables us to make necessary analysis for a smaller
interval.
Abstract: The determination of sugars in foods is very
significant. Their relation in fact, can affect the chemical and
sensorial quality of the matrix (e.g., sweetness, pH, total acidity,
microbial stability, global acceptability) and can provide information
on food to optimize several selected technological processes. Three
stages of ripeness (green, yellow and red) of tomatoes (Lycopersicon
Esculentum cv. Elegance) at different harvest dates were evaluated.
Fruit from all harvests were exposed to different of ozone doses
(0.25, 0.50 and 1 mg O3/g tomatoes) and clean air for 5 day at 15
°C±2 and 90-95 % relative humidity. Then, fruits were submitted for
extraction and analysis after a day from the finish of exposure of each
stage. The concentrations of the glucose and fructose increased in the
tomatoes which were subjected to ozone treatments.
Abstract: As the material used for fuselage structure must
possess low density, high strength to weight ratio, the selection of
appropriate materials for fuselage structure is one of the most
important tasks. Aluminum metal itself is soft and low in strength. It
can be made stronger by giving proper combination of suitable alloy
addition, mechanical treatment and thermal treatment. The usual
thermal treatment given to aluminum alloys is called age-hardening
or precipitation hardening. In this paper, the studies are carried out on
7075 aluminum alloy which is how to improve strength level for
fuselage structure. The marked effect of the strength on the ternary
alloy is clearly demonstrated at several ageing times and
temperatures. It is concluded that aluminum-zinc-magnesium alloy
can get the highest strength level in natural ageing.
Abstract: Nowadays there is a growing environmental concern
and the business communities have slowly started recognising
environmental protection and sustainable utilization of natural
resources into their marketing strategies. This paper discusses the
various Ecolabeling and Certification Systems developed world
over to regulate and introduce Fair Trade in Ornamental Fish
Industry. Ecolabeling and green certification are considered as part
of these strategies implemented partly out of compulsion from the
National and International Regulatory Bodies and Environmental
Movements. All the major markets of ornamental fishes like
European Union, USA and Japan have started putting restrictions on
the trade to impose ecolabeling as a non tariff barrier like the one
imposed on seafood and aqua cultured products. A review was done
on the available Ecolabeling and Green Certification Schemes
available at local, national and international levels for fisheries
including aquaculture and ornamental fish trade and to examine the
success and constraints faced by these schemes during its
implementation. The primary downside of certification is the
multiplicity of ecolabels and cost incurred by applicants for
certification, costs which may in turn be passed on to consumers.
The studies reveal serious inadequacies in a number of ecolabels
and cast doubt on their overall contribution to effective fisheries
management and sustainability. The paper also discusses the
inititive taken in India to develop guidelines for Green Certification
of Fresh water ornamental fishes.
Abstract: The distribution of macrobenthic polychaetes along
the coastal waters of Penang National Park was surveyed to estimate
the effect of various environmental parameters at three stations
(200m, 600m and 1200m) from the shoreline, during six sampling
months, from June 2010 to April 2011.The use of polychaetes in
descriptive ecology is surveyed in the light of a recent investigation
particularly concerning the soft bottom biota environments.
Polychaetes, often connected in the former to the notion of
opportunistic species able to proliferate after an enhancement in
organic matter, had performed a momentous role particularly with
regard to effected soft-bottom habitats. The objective of this survey
was to investigate different environment stress over soft bottom
polychaete community along Teluk Ketapang and Pantai Acheh
(Penang National Park) over a year period. Variations in the
polychaete community were evaluated using univariate and
multivariate methods. The results of PCA analysis displayed a
positive relation between macrobenthic community structures and
environmental parameters such as sediment particle size and organic
matter in the coastal water. A total of 604 individuals were examined
which was grouped into 23 families. Family Nereidae was the most
abundant (22.68%), followed by Spionidae (22.02%), Hesionidae
(12.58%), Nephtylidae (9.27%) and Orbiniidae (8.61%). It is
noticeable that good results can only be obtained on the basis of good
taxonomic resolution. We proposed that, in monitoring surveys,
operative time could be optimized not only by working at a highertaxonomic
level on the entire macrobenthic data set, but by also
choosing an especially indicative group and working at lower
taxonomic and good level.
Abstract: Antimicrobial (AM) starch-based films were
developed by incorporating chitosan and lauric acid as antimicrobial
agent into starch-based film. Chitosan has wide range of applications
as a biomaterial, but barriers still exist to its broader use due to its
physical and chemical limitations. In this work, a series of
starch/chitosan (SC) blend films containing 8% of lauric acid was
prepared by casting method. The structure of the film was
characterized by Fourier transform infrared spectroscopy (FTIR), Xray
diffraction (XRD), and scanning electron microscopy (SEM).
The results indicated that there were strong interactions were present
between the hydroxyl groups of starch and the amino groups of
chitosan resulting in a good miscibility between starch and chitosan
in the blend films. Physical properties and optical properties of the
AM starch-based film were evaluated. The AM starch-based films
incorporated with chitosan and lauric acid showed an improvement in
water vapour transmission rate (WVTR) and addition of starch
content provided more transparent films while the yellowness of the
film attributed to the higher chitosan content. The improvement in
water barrier properties was mainly attributed to the hydrophobicity
of lauric acid and optimum chitosan or starch content. AM starch
based film also showed excellent oxygen barrier. Obtaining films
with good oxygen permeability would be an indication of the
potential use of these antimicrobial packaging as a natural packaging
and an alternative packaging to the synthetic polymer to protect food
from oxidation reactions
Abstract: This study analyses the perceptions of secondary
school students about the accounting profession in Malaysia. Fifty
five form three and form four students who are taking
accounting/commerce subjects were met. Individual-s perception
data were collected through questionnaires. The results at the
secondary school level suggest that the stereotypical negative image
of the accountant ends, with students expressing the positive view of
the work of an accountant. There were also gender differences in
perceiving the accounting profession. Overall, the results of the study
suggest that we are now in line in projecting positive and accurate
perceptions of the accounting profession to secondary school
students.
Abstract: This paper presents the Literature Review of carbon fiber reinforced polymer (CFRP) strips to reinforced concrete (RC) as a strengthening solution for T-beams. Although a great deal of research has been carried out on Rectangular beams strengthened with Fibre-Reinforced Polymer composites (FRP), Fiber reinforced polymer (FRP) composites have been increasingly studied for their application in the flexural or shear strengthening of reinforced concrete (RC) members. A detailed discussion of the shearstrengthening repair with FRP is undertaken. This paper will be limited to research of CFRP material externally bonded to the tensile face of concrete beams. In particular, research studying the effect of externally applied CFRP materials on the shear performance of reinforced concrete beams will be reported.
Abstract: This paper presents an analytical framework for an
effective online personal knowledge management (PKM) of
knowledge workers. The development of this framework is prompted
by our qualitative research on the PKM processes and cognitive
enablers of knowledge workers in eight organisations selected from
three main industries in Malaysia. This multiple-case research
identifies the relationships between the effectiveness of four online
PKM processes: get/retrieve, understand/analyse, share, and connect.
It also establishes the importance of cognitive enablers that mediate
this relationship, namely, method, identify, decide and drive.
Qualitative analysis is presented as the findings, supported by the
preceded quantitative analysis on an exploratory questionnaire
survey.
Abstract: Continuous measurements and multivariate methods are applied in researching the effects of energy consumption on indoor air quality (IAQ) in a Finnish one-family house. Measured data used in this study was collected continuously in a house in Kuopio, Eastern Finland, during fourteen months long period. Consumption parameters measured were the consumptions of district heat, electricity and water. Indoor parameters gathered were temperature, relative humidity (RH), the concentrations of carbon dioxide (CO2) and carbon monoxide (CO) and differential air pressure. In this study, self-organizing map (SOM) and Sammon's mapping were applied to resolve the effects of energy consumption on indoor air quality. Namely, the SOM was qualified as a suitable method having a property to summarize the multivariable dependencies into easily observable two-dimensional map. Accompanying that, the Sammon's mapping method was used to cluster pre-processed data to find similarities of the variables, expressing distances and groups in the data. The methods used were able to distinguish 7 different clusters characterizing indoor air quality and energy efficiency in the study house. The results indicate, that the cost implications in euros of heating and electricity energy vary according to the differential pressure, concentration of carbon dioxide, temperature and season.
Abstract: The development of biomimetic micro-aerial-vehicles
(MAVs) with flapping wings is the future trend in military/domestic
field. The successful flight of MAVs is strongly related to the
understanding of unsteady aerodynamic performance of low Reynolds
number airfoils under dynamic flapping motion. This study explored
the effects of flapping frequency, stroke amplitude, and the inclined
angle of stroke plane on lift force and thrust force of a bio-inspiration
corrugated airfoil with 33 full factorial design of experiment and
ANOVA analysis. Unsteady vorticity flows over a corrugated thin
airfoil executing flapping motion are computed with time-dependent
two-dimensional laminar incompressible Reynolds-averaged
Navier-Stokes equations with the conformal hybrid mesh. The tested
freestream Reynolds number based on the chord length of airfoil as
characteristic length is fixed of 103. The dynamic mesh technique is
applied to model the flapping motion of a corrugated airfoil. Instant
vorticity contours over a complete flapping cycle clearly reveals the
flow mechanisms for lift force generation are dynamic stall, rotational
circulation, and wake capture. The thrust force is produced as the
leading edge vortex shedding from the trailing edge of airfoil to form a
reverse von Karman vortex. Results also indicated that the inclined
angle is the most significant factor on both the lift force and thrust
force. There are strong interactions between tested factors which mean
an optimization study on parameters should be conducted in further
runs.
Abstract: The aim for this research is to deliberately discuss
how and why the contexts of culture are the main significant factors
which need to be considered when conducting the international
business oversea. As a consequence of understanding these various
factors, the researcher would be able to infer some suggestions to the
international organizations. With this in mind, the results of the
understanding in a national culture environment can support the
organizations to settle its international strategies which may be useful
to develop the national export and import effectiveness. This data
collecting methods will be concentrated upon 5-10 interviews from
the senior members and business officers in the international
company in Thailand by e-mail interview and analyses the individual
manager’s viewpoint. As well as, focus on the questionnaires which
the respondents were selected randomly around 100 samples from
UK and Thailand, together with providing a functional sample size
and comparable to data. The results of the study question the role of
national culture, which contributed to in international business
effectiveness and emphasize the positive and negative aspects, as
well as suggestions to business investors are informed.
Abstract: The article deals with experimental and numerical
investigation of axi-symmetric subsonic air to air ejector with
diffuser adapted for boundary layer suction. The diffuser, which is
placed behind the mixing chamber of the ejector, has high divergence
angle and therefore low efficiency. To increase the efficiency, the
diffuser is equipped with slot enabling boundary layer suction. The
effect of boundary layer suction on flow in ejector, static pressure
distribution on the mixing chamber wall and characteristic were
measured and studied numerically. Both diffuser and ejector
efficiency were evaluated. The diffuser efficiency was increased,
however, the efficiency of ejector itself remained low.
Abstract: Internet Protocol version 4 (IPv4) address is decreasing and a rapid transition method to the next generation IP address (IPv6) should be established. This study aims to evaluate and select the best performance of the IPv6 address network transitionmechanisms, such as IPv4/IPv6 dual stack, transport Relay Translation (TRT) and Reverse Proxy with additional features. It is also aim to prove that faster access can be done while ensuring optimal usage of available resources used during the test and actual implementation. This study used two test methods such asInternet Control Message Protocol (ICMP)ping and ApacheBenchmark (AB) methodsto evaluate the performance.Performance metrics for this study include aspects ofaverageaccessin one second,time takenfor singleaccess,thedata transfer speed and the costof additional requirements.Reverse Proxy with Caching featureis the most efficientmechanism because of it simpler configurationandthe best performerfrom the test conducted.
Abstract: This paper attempts to highlight the significant role of
knowledge management practices (KMP) and competencies in
improving the performance and efficiency of public sector
organizations. It appears that public sector organizations in
developing countries have not received much attention in the
research literature of knowledge management and competencies.
Therefore, this paper seeks to explore the role of KMP and
competencies in achieving superior performance among public sector
organizations in Malaysia in the broader perspective. Survey
questionnaires were distributed to all Administrative and Diplomatic
Officers (ADS) from 28 ministries located in Putrajaya, Malaysia.
This paper also examines preliminary empirical results on the
relationship between support for knowledge management practices,
competencies, and orientation in Malaysia-s public organizations.
This paper supports the notion that the practices of knowledge
management at the organizational level are a prerequisite for
successful organizational performance. In conclusion, the results not
only have the potential to contribute theoretically to both
management strategy and knowledge management field literature but
also to the area of organizational performance.
Abstract: This paper is concerned with the production of an Arabic word semantic similarity benchmark dataset. It is the first of its kind for Arabic which was particularly developed to assess the accuracy of word semantic similarity measurements. Semantic similarity is an essential component to numerous applications in fields such as natural language processing, artificial intelligence, linguistics, and psychology. Most of the reported work has been done for English. To the best of our knowledge, there is no word similarity measure developed specifically for Arabic. In this paper, an Arabic benchmark dataset of 70 word pairs is presented. New methods and best possible available techniques have been used in this study to produce the Arabic dataset. This includes selecting and creating materials, collecting human ratings from a representative sample of participants, and calculating the overall ratings. This dataset will make a substantial contribution to future work in the field of Arabic WSS and hopefully it will be considered as a reference basis from which to evaluate and compare different methodologies in the field.
Abstract: The objective of this study was to determine the accuracy to estimation fetal weight by Johnson-s method and compares it with actual birth weight. The sample group was 126 infants delivered in Dan KhunThot hospital from January March 2012. Fetal weight was estimated by measuring fundal height according to Johnson-s method. The information was collected by studying historical delivery records and then analyzed by using the statistics of frequency, percentage, mean, and standard deviation. Finally, the difference was analyzed by a paired t-test.The results showed had an average birth weight was 3093.57 ± 391.03 g (mean ± SD) and 3,455 ± 454.55 g average estimated fetal weight by Johnson-s method higher than average actual birth weight was 384.09 grams. When classifying the infants according to birth weight found that low birth weight ( 4000 g) actual birth weight was more than estimated fetal weight. The difference was found between actual birth weight and estimation fetal weight of the minimum weight in high birth weight ( > 4000 g) , the appropriate birth weight (2500-3999g) and low birth weight (
Abstract: The purpose of this research was to study the
motivation factors to influence the decision to choose Thai Fabric. A
multiple-stage sample was utilized to collect 400 samples from
working women who had diverse occupations all over Thailand. This
research was a quantitative analysis and questionnaire was used a tool
to collect data. Descriptive statistics used in this research included
percentage, average, and standard deviation and inferential statistics
included hypothesis testing of one way ANOVA.
The research findings revealed that demographic factors and social
factors had an influence to the positive idea of wearing Thai fabric (F
= 5.377, P value < 0.05). The respondents who had the age over 41
years old had a better positive idea of wearing Thai fabric than other
groups. Moreover, the findings revealed that age had influenced the
positive idea of wearing Thai fabric (F = 3.918, P value < 0.05). The
respondents who had the age over 41 years old also had stronger
believe that wearing Thai fabric to work and social gatherings are
socially acceptable than other groups.