Abstract: The purposes of this research were 1) to investigate
behavior of media exposure and participation in environmental
activities of King Mongkut-s University of Technology Thonburi
(KMUTT) dormitory students, 2) to compare the correlation between
faculties and participation in environmental activities of KMUTT
dormitory students, and 3) to compare the correlation between media
exposure and participation in environmental activities of KMUTT
dormitory students. The tool used for collecting data was
questionnaire. The research findings revealed that dormitory students
were mostly exposed to the environmental media via public relations
boards for general media and KMUTT dormitory media. Dormitory
students were daily exposed to media via websites on the internet and
weekly for other media. Dormitory students participation in the
environmental activities was at high level (x = 3.65) on an
individual basis and was at medium level (x = 2.76) on a collective
basis. Faculties did not correlate with the participation in
environmental activities of dormitory students at the .01 statistical
level and media exposure via various media correlated with
participation in environmental activities of dormitory students at the
.01 statistical level.
Abstract: Biochemical investigations were carried out to assess
the effect of different exposure regimes of Kazakhstan crude oil
(KCO) on hepatic antioxidant defense system in albino rats.
Contaminants were delivered under two different dosing regimes,
with all treatments receiving the same total contaminant load by the
end of the exposure period. Rats in regime A injected with KCO
once at a dose of 6 ml/kg bw while in regime B injected multiply at a
dose of 1.5 ml/kg bw on day 1, 3, 5 and 8. Antioxidant biomarkers
were measured in hepatic tissue after 1, 3, 5 and 8 days. Significant
induction was observed in serum aminotransferases (ALT, AST)
(p
Abstract: This paper demonstrates the feasibility of replacing
the metal coil spring with the composite coil spring. Three different
types of springs were made using glass fiber, carbon fiber and
combination of glass fiber and carbon fiber. The objective of the
study is to reduce the weight of the spring. According to the
experimental results the spring rate of the carbon fiber spring is
34% more than the glass fiber spring and 45% more than the glass
fiber/carbon fiber spring. The weight of the carbon fiber spring is
18% less than the glass fiber spring, 15% less than the Glass
fiber/carbon fiber spring and 80% less than the steel spring.
Abstract: In this paper, the strength of a stabilizer is determined when the static and fatigue multiaxial loading are applied. Stabilizer is a part of suspension system in the heavy truck for stabilizing the cabin against the vibration of the road which composes of a thin-walled tube joined to a forge component by fillet weld. The component is loaded by non proportional random sequence of torsion and bending. Residual stress of welding process is considered here for static loading. This static loading with road irregularities are applied in this study as fatigue case that can affected in the fillet welded area of this part. The stresses in the welded structure are calculated using FEA. In addition, the fatigue with multi axial loading in the fillet weld is also investigated and the critical zone of the stabilizer is specified and presented by graphs. Residual stresses that have been resulted by the thermal forces are considered in FEA. Force increasing is the element of finding the critical point of the component.
Abstract: In this paper, the processing of sonar signals has been
carried out using Minimal Resource Allocation Network (MRAN)
and a Probabilistic Neural Network (PNN) in differentiation of
commonly encountered features in indoor environments. The
stability-plasticity behaviors of both networks have been
investigated. The experimental result shows that MRAN possesses
lower network complexity but experiences higher plasticity than
PNN. An enhanced version called parallel MRAN (pMRAN) is
proposed to solve this problem and is proven to be stable in
prediction and also outperformed the original MRAN.
Abstract: CFlow is a flow chart software, it contains facilities to
draw and evaluate a flow chart. A flow chart evaluation applies a
simulation method to enable presentation of work flow in a flow
chart solution. Flow chart simulation of CFlow is executed by
manipulating the CFlow data file which is saved in a graphical vector
format. These text-based data are organised by using a data
classification technic based on a Library classification-scheme. This
paper describes the file format for flow chart simulation software of
CFlow.
Abstract: Unlike general-purpose processors, digital signal
processors (DSP processors) are strongly application-dependent. To
meet the needs for diverse applications, a wide variety of DSP
processors based on different architectures ranging from the
traditional to VLIW have been introduced to the market over the
years. The functionality, performance, and cost of these processors
vary over a wide range. In order to select a processor that meets the
design criteria for an application, processor performance is usually
the major concern for digital signal processing (DSP) application
developers. Performance data are also essential for the designers of
DSP processors to improve their design. Consequently, several DSP
performance benchmarks have been proposed over the past decade or
so. However, none of these benchmarks seem to have included recent
new DSP applications.
In this paper, we use a new benchmark that we recently developed
to compare the performance of popular DSP processors from Texas
Instruments and StarCore. The new benchmark is based on the
Selectable Mode Vocoder (SMV), a speech-coding program from the
recent third generation (3G) wireless voice applications. All
benchmark kernels are compiled by the compilers of the respective
DSP processors and run on their simulators. Weighted arithmetic
mean of clock cycles and arithmetic mean of code size are used to
compare the performance of five DSP processors.
In addition, we studied how the performance of a processor is
affected by code structure, features of processor architecture and
optimization of compiler. The extensive experimental data gathered,
analyzed, and presented in this paper should be helpful for DSP
processor and compiler designers to meet their specific design goals.
Abstract: The purpose of this study was to survey the effect of
organizational communication system on the conflict in physical
education offices of Isfahan province. The research methodology of
this research was a descriptive study. All employees working in
physical education offices of Isfahan province were included in the
sample for this study (N= 236). Researcher made questionnaire and
demographic questionnaire were used as investigation instruments.
Based on the result of chi square test, there is significant difference
between organizational communication system and interpersonal
conflict. The most of participants evaluate communication in an
informal way and pointed out that the communication channels were
not open. Based on the result of binomial test, interpersonal conflict
exists in physical education offices of Isfahan.
Abstract: Previous studies have indicated that one of the most
critical failure reasons of enterprise systems is the lack of knowledge
sharing and utilization across organizations. As a consequence, many
information systems researchers have paid attention to examining the
effect of absorptive capacity closely associated with knowledge
sharing and transferring on IS usage performance. A lack of
communications and interactions due to a lack of organizational
citizenship behavior might lead to weak absorptive capacity and thus
negatively influence knowledge sharing across organizations. In this
study, a theoretical model which delves into the relationship between
usage performance of enterprise systems and its determinants was
established.
Abstract: Based on the standard finite element method, a new
finite element method which is known as nonlocal finite element
method (NL-FEM) is numerically implemented in this article to
study the nonlocal effects for solving 1D nonlocal elastic problem.
An Eringen-type nonlocal elastic model is considered. In this model,
the constitutive stress-strain law is expressed interms of integral
equation which governs the nonlocal material behavior. The new
NL-FEM is adopted in such a way that the postulated nonlocal elastic
behavior of material is captured by a finite element endowed with a
set of (cross-stiffness) element itself by the other elements in mesh.
An example with their analytical solutions and the relevant numerical
findings for various load and boundary conditions are presented and
discussed in details. It is observed from the numerical solutions that
the torsional deformation angle decreases with increasing nonlocal
nanoscale parameter. It is also noted that the analytical solution fails
to capture the nonlocal effect in some cases where numerical
solutions handle those situation effectively which prove the
reliability and effectiveness of numerical techniques.
Abstract: Artemia is one of the most conspicuous invertebrates
associated with aquaculture. It can be considered as a model
organism, offering numerous advantages for comprehensive and
multidisciplinary studies using morphologic or molecular methods.
Since DNA extraction is an important step of any molecular
experiment, a new and a rapid method of DNA extraction from adult
Artemia was described in this study. Besides, the efficiency of this
technique was compared with two widely used alternative techniques,
namely Chelex® 100 resin and SDS-chloroform methods. Data
analysis revealed that the new method is the easiest and the most cost
effective method among the other methods which allows a quick and
efficient extraction of DNA from the adult animal.
Abstract: In the present paper, we-ll explore how social media tools provide an opportunity for new developments of the e-Learning in the context of managing personal knowledge. There will be a discussion how social media tools provide a possibility for helping knowledge workersand students to gather, organize and manage their personal information as a part of the e-learning process. At the centre of this social software driven approach to e-learning environments are the challenges of personalization and collaboration. We-ll share concepts of how organizations are using social media for e-Learning and believe that integration of these tools into traditional e-Learning is probably not a choice, but inevitability. Students- Survey of use of web technologies and social networking tools is presented. Newly developed framework for semantic blogging capable of organizing results relevant to user requirements is implemented at Varna Free University (VFU) to provide more effective navigation and search.
Abstract: This paper is devoted to a delayed periodic predatorprey system with non-monotonic numerical response on time scales. With the help of a continuation theorem based on coincidence degree theory, we establish easily verifiable criteria for the existence of multiple periodic solutions. As corollaries, some applications are listed. In particular, our results improve and generalize some known ones.
Abstract: Dengue, a disease found in most tropical and
subtropical areas of the world. It has become the most common
arboviral disease of humans. This disease is caused by any of four
serotypes of dengue virus (DEN1-DEN4). In many endemic
countries, the average age of getting dengue infection is shifting
upwards, dengue in pregnancy and infancy are likely to be
encountered more frequently. The dynamics of the disease is studied
by a compartmental model involving ordinary differential equations
for the pregnant, infant human and the vector populations. The
stability of each equilibrium point is given. The epidemic dynamic is
discussed. Moreover, the numerical results are shown for difference
values of dengue antibody.
Abstract: Calcium is very important for communication among
the neurons. It is vital in a number of cell processes such as secretion,
cell movement, cell differentiation. To reduce the system of reactiondiffusion
equations of [Ca2+] into a single equation, two theories
have been proposed one is excess buffer approximation (EBA) other
is rapid buffer approximation (RBA). The RBA is more realistic than
the EBA as it considers both the mobile and stationary endogenous
buffers. It is valid near the mouth of the channel. In this work we have
studied the effects of different types of buffers on calcium diffusion
under RBA. The novel thing studied is the effect of sodium ions on
calcium diffusion. The model has been made realistic by considering
factors such as variable [Ca2+], [Na+] sources, sodium-calcium
exchange protein(NCX), Sarcolemmal Calcium ATPase pump. The
proposed mathematical leads to a system of partial differential equations
which has been solved numerically to study the relationships
between different parameters such as buffer concentration, buffer
disassociation rate, calcium permeability. We have used Forward
Time Centred Space (FTCS) approach to solve the system of partial
differential equations.
Abstract: Educating effective architect designers is an important
goal of architectural education. But what contributes to students-
performance, and to critical and creative thinking in architectural
design education? Besides teaching architecture students how to
understand logical arguments, eliminate the inadequate solutions and
focus on the correct ones, it is also crucial to teach students how to
focus on exploring ideas and the alternative solutions and seeking for
other right answers rather than one. This paper focuses on the
enhancing architectural design education and may provide
implications for enhancing teaching design.
Abstract: In this note, we discuss the convergence behavior of a modified inexact Uzawa algorithm for solving generalized saddle point problems, which is an extension of the result obtained in a recent paper [Z.H. Cao, Fast Uzawa algorithm for generalized saddle point problems, Appl. Numer. Math., 46 (2003) 157-171].
Abstract: Security is an interesting and significance issue for
popular virtual platforms, such as virtualization cluster and cloud
platforms. Virtualization is the powerful technology for cloud
computing services, there are a lot of benefits by using virtual machine
tools which be called hypervisors, such as it can quickly deploy all
kinds of virtual Operating Systems in single platform, able to control
all virtual system resources effectively, cost down for system platform
deployment, ability of customization, high elasticity and high
reliability. However, some important security problems need to take
care and resolved in virtual platforms that include terrible viruses, evil
programs, illegal operations and intrusion behavior. In this paper, we
present useful Intrusion Detection Mechanism (IDM) software that not
only can auto to analyze all system-s operations with the accounting
journal database, but also is able to monitor the system-s state for
virtual platforms.
Abstract: In this paper, by constructing a special set and utilizing fixed point theory in coin, we study the existence of solution of singular two point’s boundary value problem for second-order differential equation, which improved and generalize the result of related paper.
Abstract: The impact of fixed speed squirrel cage type as well as
variable speed doubly fed induction generators (DFIG) on dynamic
performance of a multimachine power system has been investigated.
Detailed models of the various components have been presented and
the integration of asynchronous and synchronous generators has been
carried out through a rotor angle based transform. Simulation studies
carried out considering the conventional dynamic model of squirrel
cage asynchronous generators show that integration, as such, could
degrade to the AC system performance transiently. This article
proposes a frequency or power controller which can effectively
control the transients and restore normal operation of fixed speed
induction generator quickly. Comparison of simulation results
between classical cage and doubly-fed induction generators indicate
that the doubly fed induction machine is more adaptable to
multimachine AC system. Frequency controller installed in the DFIG
system can also improve its transient profile.