Abstract: With the advancement of wireless sensor network technology,
its practical utilization is becoming an important challange.
This paper overviews my past environmental monitoring project,
and discusses the process of starting the monitoring by classifying
it into four steps. The steps to start environmental monitoring can
be complicated, but not well discussed by researchers of wireless
sensor network technology. This paper demonstrates our activity and
challenges in each of the four steps to ease the process, and argues
future challenges to enable quick start of environmental monitoring.
Abstract: In this study, numerical simulations on laminar flow in
sinusoidal wavy shaped tubes were conducted for mean Reynolds
number of 250, which is in the range of physiological flow-rate and
investigated flow structures, pressure distribution and particle
trajectories both in steady and periodic inflow conditions. For
extensive comparisons, various wave lengths and amplitudes of sine
function for geometry of tube models were employed. The results
showed that small amplitude secondary curvature has significant
influence on the nature of flow patterns and particle mixing
mechanism. This implies that characterizing accurate geometry is
essential in accurate predicting of in vivo hemodynamics and may
motivate further study on any possibility of reflection of secondary
flow on vascular remodeling and pathophysiology.
Abstract: 98% of the energy needed in Taiwan has been
imported. The prices of petroleum and electricity have been
increasing. In addition, facility capacity, amount of electricity
generation, amount of electricity consumption and number of Taiwan
Power Company customers have continued to increase. For these
reasons energy conservation has become an important topic. In the
past linear regression was used to establish the power consumption
models for chillers. In this study, grey prediction is used to evaluate
the power consumption of a chiller so as to lower the total power
consumption at peak-load (so that the relevant power providers do not
need to keep on increasing their power generation capacity and facility
capacity).
In grey prediction, only several numerical values (at least four
numerical values) are needed to establish the power consumption
models for chillers. If PLR, the temperatures of supply chilled-water
and return chilled-water, and the temperatures of supply cooling-water
and return cooling-water are taken into consideration, quite accurate
results (with the accuracy close to 99% for short-term predictions)
may be obtained. Through such methods, we can predict whether the
power consumption at peak-load will exceed the contract power
capacity signed by the corresponding entity and Taiwan Power
Company. If the power consumption at peak-load exceeds the power
demand, the temperature of the supply chilled-water may be adjusted
so as to reduce the PLR and hence lower the power consumption.
Abstract: The two-dimensional gel electrophoresis method
(2-DE) is widely used in Proteomics to separate thousands of proteins
in a sample. By comparing the protein expression levels of proteins in
a normal sample with those in a diseased one, it is possible to identify
a meaningful set of marker proteins for the targeted disease. The major
shortcomings of this approach involve inherent noises and irregular
geometric distortions of spots observed in 2-DE images. Various
experimental conditions can be the major causes of these problems. In
the protein analysis of samples, these problems eventually lead to
incorrect conclusions. In order to minimize the influence of these
problems, this paper proposes a partition based pair extension method
that performs spot-matching on a set of gel images multiple times and
segregates more reliable mapping results which can improve the
accuracy of gel image analysis. The improved accuracy of the
proposed method is analyzed through various experiments on real
2-DE images of human liver tissues.
Abstract: This paper is a part of research, in which the way the
biomedical engineers follow in their work is analyzed. The goal of
this paper is to present a method for specification of user
requirements in the medical devices maintenance process. Data
Gathering Methods, Research Model Phases and Descriptive
Analysis is presented. These technology and verification rules can be
implemented in Medical devices maintenance management process to
the maintenance process.
Abstract: This paper presents the effect of driving a motor
vehicle on the stress levels of older drivers, indicated by monitoring
their hear rate increase whilst completing various everyday driving
tasks. Results suggest that whilst older female drivers heart rate varied
more significantly than males, the actual age of a participant did not
result in a significant change in heart rate due to stress, within the age
group tested. The analysis of the results indicates the most stressful
manoeuvres undertaken by the older drivers and highlights the tasks
which were found difficult with a view to implementing technologies
to aid the more senior driver in automotive travel.
Abstract: This paper presents a hybrid electric scooter model developed and simulated using Matlab/Simulink. This hybrid scooter modeled has a parallel hybrid structure. The main propulsion units consist of a two stroke internal combustion engine and a hub motor attached to the front wheel of the scooter. The methodology used to optimize the energy and fuel consumption of the hybrid electric scooter is the multi-mode approach. Various case studies were presented to check the model and were compared to the literatures. Results shown that the model developed was feasible and valuable.
Abstract: This study aims to segment objects using the K-means
algorithm for texture features. Firstly, the algorithm transforms color
images into gray images. This paper describes a novel technique for
the extraction of texture features in an image. Then, in a group of
similar features, objects and backgrounds are differentiated by using
the K-means algorithm. Finally, this paper proposes a new object
segmentation algorithm using the morphological technique. The
experiments described include the segmentation of single and multiple
objects featured in this paper. The region of an object can be
accurately segmented out. The results can help to perform image
retrieval and analyze features of an object, as are shown in this paper.
Abstract: In this research, we study a control method of a multivehicle
system while considering the limitation of communication
range for each vehicles. When we control networked vehicles with
limitation of communication range, it is important to control the
communication network structure of a multi-vehicle system in order
to keep the network-s connectivity. From this, we especially aim to
control the network structure to the target structure. We formulate
the networked multi-vehicle system with some disturbance and the
communication constraints as a hybrid dynamical system, and then
we study the optimal control problems of the system. It is shown
that the system converge to the objective network structure in finite
time when the system is controlled by the receding horizon method.
Additionally, the optimal control probrems are convertible into the
mixed integer problems and these problems are solvable by some
branch and bound algorithm.
Abstract: Using Dynamic Bayesian Networks (DBN) to model genetic regulatory networks from gene expression data is one of the major paradigms for inferring the interactions among genes. Averaging a collection of models for predicting network is desired, rather than relying on a single high scoring model. In this paper, two kinds of model searching approaches are compared, which are Greedy hill-climbing Search with Restarts (GSR) and Markov Chain Monte Carlo (MCMC) methods. The GSR is preferred in many papers, but there is no such comparison study about which one is better for DBN models. Different types of experiments have been carried out to try to give a benchmark test to these approaches. Our experimental results demonstrated that on average the MCMC methods outperform the GSR in accuracy of predicted network, and having the comparable performance in time efficiency. By proposing the different variations of MCMC and employing simulated annealing strategy, the MCMC methods become more efficient and stable. Apart from comparisons between these approaches, another objective of this study is to investigate the feasibility of using DBN modeling approaches for inferring gene networks from few snapshots of high dimensional gene profiles. Through synthetic data experiments as well as systematic data experiments, the experimental results revealed how the performances of these approaches can be influenced as the target gene network varies in the network size, data size, as well as system complexity.
Abstract: The aim of this study is to investigate the effect of
perceived social support and stress on the coping capability and level
of depression of foreign and local students in Malaysia. Using
convenience sampling, 200 students from three universities in
Selangor, Malaysia participated in the study. The results of this study
revealed that there was a significant relationship between perceived
social support and coping capability. It is also found that there is a
negative relationship between coping capability and depression.
Further, stress and depression are positively related whereas stress
and coping capability are negatively related. Lastly, there is no
significant difference for the stress level and coping capability
amongst local and foreign students.
Abstract: Perceptions of quality from both designers and users
perspective have now stretched beyond the traditional usability,
incorporating abstract and subjective concepts. This has led to a shift
in human computer interaction research communities- focus; a shift
that focuses on achieving user experience (UX) by not only fulfilling
conventional usability needs but also those that go beyond them. The
term UX, although widely spread and given significant importance,
lacks consensus in its unified definition. In this paper, we survey
various UX definitions and modeling frameworks and examine them
as the foundation for proposing a UX evolution lifecycle framework
for understanding UX in detail. In the proposed framework we identify
the building blocks of UX and discuss how UX evolves in various
phases. The framework can be used as a tool to understand experience
requirements and evaluate them, resulting in better UX design and
hence improved user satisfaction.
Abstract: Covering-based rough sets is an extension of rough
sets and it is based on a covering instead of a partition of the
universe. Therefore it is more powerful in describing some practical
problems than rough sets. However, by extending the rough sets,
covering-based rough sets can increase the roughness of each model
in recognizing objects. How to obtain better approximations from
the models of a covering-based rough sets is an important issue.
In this paper, two concepts, determinate elements and indeterminate
elements in a universe, are proposed and given precise definitions
respectively. This research makes a reasonable refinement of the
covering-element from a new viewpoint. And the refinement may
generate better approximations of covering-based rough sets models.
To prove the theory above, it is applied to eight major coveringbased
rough sets models which are adapted from other literature.
The result is, in all these models, the lower approximation increases
effectively. Correspondingly, in all models, the upper approximation
decreases with exceptions of two models in some special situations.
Therefore, the roughness of recognizing objects is reduced. This
research provides a new approach to the study and application of
covering-based rough sets.
Abstract: Photoselective plastic films with thermic properties
are now available so that greenhouses clad with such plastics exhibit
a higher degree of “Greenhouse Effect” with a consequent increase in
night time temperature. In this study, we investigate the potential
benefits of a range of thermic plastic films used as greenhouse cover
materials on the vegetative and reproductive growth and development
of Iceberg lettuce (Lactuca sativa L). Transplants were grown under
thermic films and destructively harvested 4, 5, and 6 weeks after
transplanting. Thermic films can increase night temperatures up to 2
⁰C reducing the wide fluctuation in greenhouse temperature during
winter compared to the standard commercial film and consequently
increased the yield (leaf number, fresh weight, and dry weight) of
lettuce plants. Lettuce plants grown under Clear film respond to cold
stress by the accumulation of secondary products (phenolics, and
flavonoids).
Abstract: This paper investigates the effect of International
Financial Reporting Standards (IFRS) adoption on the frequency of
earnings managements towards small positive profits. We focus on
two emerging markets IFRS adopters: South Africa and Turkey.
We tested our logistic regression using appropriate panelestimation
techniques over a sample of 330 South African and 210
Turkish firm-year observations over the period 2002-2008. Our
results document that mandatory adoption of IFRS is not associated
with a reduction in earnings management towards small positive
profits in emerging markets. These results contradict most of the
previous findings of the studies conducted in developed countries.
Based on the legal system factor, we compare the intensity of
earnings management between a code law country (Turkey) and a
common law country (South Africa) over the pre and post-adoption
periods. Our findings show that the frequency of such earnings
management practice increases significantly for the code law
country.
Abstract: Little research has examined working memory
capacity (WMC) in signed language interpreters and deaf signers.
This paper presents the findings of a study that investigated WMC in
professional Australian Sign Language (Auslan)/English interpreters
and deaf signers. Thirty-one professional Auslan/English interpreters
(14 hearing native signers and 17 hearing non-native signers)
completed an English listening span task and then an Auslan working
memory span task, which tested their English WMC and their Auslan
WMC, respectively. Moreover, 26 deaf signers (6 deaf native signers
and 20 deaf non-native signers) completed the Auslan working
memory span task. The results revealed a non-significant difference
between the hearing native signers and the hearing non-native signers
in their English WMC, and a non-significant difference between the
hearing native signers and the hearing non-native signers in their
Auslan WMC. Moreover, the results yielded a non-significant
difference between the hearing native signers- English WMC and
their Auslan WMC, and a non-significant difference between the
hearing non-native signers- English WMC and their Auslan WMC.
Furthermore, a non-significant difference was found between the deaf
native signers and the deaf non-native signers in their Auslan WMC.
Abstract: Traditionally, VLSI implementations of spiking
neural nets have featured large neuron counts for fixed computations
or small exploratory, configurable nets. This paper presents the
system architecture of a large configurable neural net system
employing a dedicated mapping algorithm for projecting the targeted
biology-analog nets and dynamics onto the hardware with its
attendant constraints.
Abstract: The paper presents an investigation in to the effect of neural network predictive control of UPFC on the transient stability performance of a multimachine power system. The proposed controller consists of a neural network model of the test system. This model is used to predict the future control inputs using the damped Gauss-Newton method which employs ‘backtracking’ as the line search method for step selection. The benchmark 2 area, 4 machine system that mimics the behavior of large power systems is taken as the test system for the study and is subjected to three phase short circuit faults at different locations over a wide range of operating conditions. The simulation results clearly establish the robustness of the proposed controller to the fault location, an increase in the critical clearing time for the circuit breakers, and an improved damping of the power oscillations as compared to the conventional PI controller.
Abstract: This paper presents a hybrid association control
scheme that can maintain load balancing among access points in the
wireless LANs and can satisfy the quality of service requirements of
the multimedia traffic applications. The proposed model is
mathematically described as a linear programming model. Simulation
study and analysis were conducted in order to demonstrate the
performance of the proposed hybrid load balancing and association
control scheme. Simulation results shows that the proposed scheme
outperforms the other schemes in term of the percentage of blocking
and the quality of the data transfer rate providing to the multimedia
and real-time applications.
Abstract: The reliable results of an insulated oval duct
considering heat radiation are obtained basing on accurate oval
perimeter obtained by integral method as well as one-dimensional
Plane Wedge Thermal Resistance (PWTR) model. This is an extension
study of former paper of insulated oval duct neglecting heat radiation.
It is found that in the practical situations with long-short-axes ratio a/b
4.5% while t/R2