Abstract: Simultaneous determination of multicomponents of phenol, resorcinol and catechol with a chemometric technique a PCranking artificial neural network (PCranking-ANN) algorithm is reported in this study. Based on the data correlation coefficient method, 3 representative PCs are selected from the scores of original UV spectral data (35 PCs) as the original input patterns for ANN to build a neural network model. The results obtained by iterating 8000 .The RMSEP for phenol, resorcinol and catechol with PCranking- ANN were 0.6680, 0.0766 and 0.1033, respectively. Calibration matrices were 0.50-21.0, 0.50-15.1 and 0.50-20.0 μg ml-1 for phenol, resorcinol and catechol, respectively. The proposed method was successfully applied for the determination of phenol, resorcinol and catechol in synthetic and water samples.
Abstract: Laser engraving is a manufacturing method for those applications where previously Electrical Discharge Machining (EDM) was the only choice. Laser engraving technology removes material layer-by-layer and the thickness of layers is usually in the range of few microns. The aim of the present work is to investigate the influence of the process parameters on the surface quality when machined by laser engraving. The examined parameters were: the pulse frequency, the beam speed and the layer thickness. The surface quality was determined by the surface roughness for every set of parameters. Experimental results on Al7075 material showed that the surface roughness strictly depends on the process parameters used.
Abstract: This paper presents a software quality support tool, a
Java source code evaluator and a code profiler based on
computational intelligence techniques. It is Java prototype software
developed by AI Group [1] from the Research Laboratories at
Universidad de Palermo: an Intelligent Java Analyzer (in Spanish:
Analizador Java Inteligente, AJI). It represents a new approach to
evaluate and identify inaccurate source code usage and transitively,
the software product itself.
The aim of this project is to provide the software development
industry with a new tool to increase software quality by extending
the value of source code metrics through computational intelligence.
Abstract: This study examines knowledge management in the public organizations in Iran. The purpose of this article is to provide a conceptual framework for application of knowledge management in public organizations. The study indicates that an increasing tendency for implementation of knowledge management in organizations is emerging. Nonetheless knowledge management in public organizations is toddler and little has been done to bring the subject to use in the public sector. The globalization of change and popularization of some values like participation, citizen-orientation and knowledge-orientation in the new theories of public administration requires that the knowledge management is considered and attend to in the public sector. This study holds that a knowledge management framework for public organizations is different from this in the public sector, because public sector is stakeholder-dependent while the private is shareholder-dependent. Based on the research, we provide a conceptual model. The model proposed involves three factors: Organizational, knowledge citizens and contextual factors. The study results indicate these factors affect on knowledge management in public organizations in Iran.
Abstract: In this paper we describe the recognition process of Greek compound words using the PC-KIMMO software. We try to show certain limitations of the system with respect to the principles of compound formation in Greek. Moreover, we discuss the computational processing of phenomena such as stress and syllabification which are indispensable for the analysis of such constructions and we try to propose linguistically-acceptable solutions within the particular system.
Abstract: To judge whether the memristor can be interpreted as
the fourth fundamental circuit element, we propose a variable-relation
criterion of fundamental circuit elements. According to the criterion,
we investigate the nature of three fundamental circuit elements and the
memristor. From the perspective of variables relation, the memristor
builds a direct relation between the voltage across it and the current
through it, instead of a direct relation between the magnetic flux and
the charge. Thus, it is better to characterize the memristor and the
resistor as two special cases of the same fundamental circuit element,
which is the memristive system in Chua-s new framework. Finally, the
definition of memristor is refined according to the difference between
the magnetic flux and the flux linkage.
Abstract: High purity hydrogen and the valuable by-product of carbon nanotubes (CNTs) can be produced by the methane catalytic decomposition. The methane conversion and the performance of CNTs were determined by the choices of catalysts and the condition of decomposition reaction. In this paper, Ni/MgO and Ni/O-D (oxidized diamond) catalysts were prepared by wetness impregnation method. The effects of reaction temperature and space velocity of methane on the methane conversion were investigated in a fixed-bed. The surface area, structure and micrography were characterized with BET, XPS, SEM, EDS technology. The results showed that the conversion of methane was above 8% within 150 min (T=500) for 33Ni/O-D catalyst and higher than 25% within 120 min (T=650) for 41Ni/MgO catalyst. The initial conversion increased with the increasing temperature of the decomposition reaction, but their catalytic activities decreased rapidly while at too higher temperature. To decrease the space velocity of methane was propitious to promote the methane conversion, but not favor of the hydrogen yields. The appearance of carbon resulted from the methane decomposition lied on the support type and the condition of catalytic reaction. It presented as fiber shape on the surface of Ni/O-D at the relatively lower temperature such as 500 and 550, but as grain shape stacked on and overlayed on the surface of the metal nickel while at 650. The carbon fiber can form on the Ni/MgO surface at 650 and the diameter of the carbon fiber increased with the decreasing space velocity.
Abstract: Re-entrant scheduling is an important search problem
with many constraints in the flow shop. In the literature, a number of
approaches have been investigated from exact methods to
meta-heuristics. This paper presents a genetic algorithm that encodes
the problem as multi-level chromosomes to reflect the dependent
relationship of the re-entrant possibility and resource consumption.
The novel encoding way conserves the intact information of the data
and fastens the convergence to the near optimal solutions. To test the
effectiveness of the method, it has been applied to the
resource-constrained re-entrant flow shop scheduling problem.
Computational results show that the proposed GA performs better than
the simulated annealing algorithm in the measure of the makespan
Abstract: Team efficacy beliefs show promise in enhancing
team performance. Using a model-based quantitative research design,
we investigated the antecedents and performance consequences of
generalized team efficacy (potency) in a sample of 56 capital projects
executed by 15 Fortune 500 companies in the process industries.
Empirical analysis of our field survey identified that generalized
team efficacy beliefs were positively associated with an objective
measure of project cost performance. Regression analysis revealed
that team competence, empowering leadership, and performance
feedback all predicted generalized team efficacy beliefs. Tests of
mediation revealed that generalized team efficacy fully mediated
between these three inputs and project cost performance.
Abstract: Collaborative networked learning (hereafter CNL)
was first proposed by Charles Findley in his work “Collaborative
networked learning: online facilitation and software support" as part
of instructional learning for the future of the knowledge worker. His
premise was that through electronic dialogue learners and experts
could interactively communicate within a contextual framework to
resolve problems, and/or to improve product or process knowledge.
Collaborative learning has always been the forefront of educational
technology and pedagogical research, but not in the mainstream of
operations management. As a result, there is a large disparity in the
study of CNL, and little is known about the antecedents of network
collaboration and sharing of information among diverse employees in
the manufacturing environment. This paper presents a model to
bridge the gap between theory and practice. The objective is that
manufacturing organizations will be able to accelerate organizational
learning and sharing of information through various collaborative
Abstract: Megalopolis is a group of densely populated metropolitan areas that combine to form an urban complex. Since China introduced the economic reforms in late 1970s, the Chinese urban system has experienced unprecedented growth. The process of urbanisation prevailed in the 1980s, and the process of predominantly large city growth appeared to continue through 1990s and 2000s. In this study, the magnitude and pattern of urbanisation in China during 1990s were examined using remotely sensed imagery acquired by TM/ETM+ sensor onboard the Landsat satellites. The development of megalopolis areas in China was also studied based on the GIS analysis of the increases of urban and built-up area from 1990 to 2000. The analysis suggests that in the traditional agricultural zones in China, e.g., Huang-Huai-Hai Plains, Changjiang River Delta, Pearl River Delta and Sichuan Basin, the urban and built-up areas increased by 1.76 million hectares, of which 0.82 million hectares are expansion of urban areas, an increase of 24.78% compared with 1990 at the national scale. The Yellow River Delta, Changjiang River Delta and Pearl River Delta also saw an increase of urban and built-up area by 63.9%, 66.2% and 83.0% respectively. As a result, three major megalopolises were developed in China: the Guangzhou-Shenzhen-Hong Kong- Macau (Pearl River Delta: PRD) megalopolis area, the Shanghai- Nanjing-Hangzhou (Changjiang River Delta: CRD) megalopolis area and the Beijing-Tianjing-Tangshan-Qinhuangdao (Yellow River Delta-Bohai Sea Ring: YRD) megalopolis area. The relationship between the processed of megalopolisation and the inter-provincial population flow was also explored in the context of social-economic and transport infrastructure development in Post-reform China.
Abstract: Twenty four male Thai native × Anglo-Nubian
crossbred goats were randomly allocated to receive four treatments.
The experiment was conducted for four months and slaughtered that
the Longissimus dorsi muscle was collected for fatty acid analysis.
The results conclude that either castrated method or ages had no
significantly different on monounsaturated fatty acid (MUFA)
(P>0.05) except erucic acid (C22:1n9). Interaction between castrated
method and ages had significantly different in MUFA (P
Abstract: The objective of this paper is to develop a neural
network-based residual generator to detect the fault in the actuators
for a specific communication satellite in its attitude control system
(ACS). First, a dynamic multilayer perceptron network with dynamic
neurons is used, those neurons correspond a second order linear
Infinite Impulse Response (IIR) filter and a nonlinear activation
function with adjustable parameters. Second, the parameters from the
network are adjusted to minimize a performance index specified by
the output estimated error, with the given input-output data collected
from the specific ACS. Then, the proposed dynamic neural network
is trained and applied for detecting the faults injected to the wheel,
which is the main actuator in the normal mode for the communication
satellite. Then the performance and capabilities of the proposed
network were tested and compared with a conventional model-based
observer residual, showing the differences between these two
methods, and indicating the benefit of the proposed algorithm to
know the real status of the momentum wheel. Finally, the application
of the methods in a satellite ground station is discussed.
Abstract: CEMTool is a command style design and analyzing
package for scientific and technological algorithm and a matrix based
computation language. In this paper, we present new 2D & 3D
finite element method (FEM) packages for CEMTool. We discuss
the detailed structures and the important features of pre-processor,
solver, and post-processor of CEMTool 2D & 3D FEM packages. In
contrast to the existing MATLAB PDE Toolbox, our proposed FEM
packages can deal with the combination of the reserved words. Also,
we can control the mesh in a very effective way. With the introduction
of new mesh generation algorithm and fast solving technique, our
FEM packages can guarantee the shorter computational time than
MATLAB PDE Toolbox. Consequently, with our new FEM packages,
we can overcome some disadvantages or limitations of the existing
MATLAB PDE Toolbox.
Abstract: In this paper, based on almost periodic functional hull theory and M-matrix theory, some sufficient conditions are established for the existence and uniqueness of positive almost periodic solution for a class of BAM neural networks with time-varying delays. An example is given to illustrate the main results.
Abstract: A new mechanism responsible for structural life
consumption due to resonant fatigue in turbine blades, or vanes, is
presented and explained. A rotating blade or vane in a gas turbine can
change its contour due to erosion and/or material build up, in any of
these instances, the surface pressure distribution occurring on the
suction and pressure sides of blades-vanes can suffer substantial
modification of their pressure and temperatures envelopes and flow
characteristics. Meanwhile, the relative rotation between the blade
and duct vane while the pressurized gas flows and the consequent
wake crossings, will induce a fluctuating thrust force or lift that will
excite the blade.
An actual totally used up set of vane-blade components in a HP
turbine power stage in a gas turbine is analyzed. The blade suffered
some material erosion mostly at the trailing edge provoking a
peculiar surface pressure envelope which evolved as the relative
position between the vane and the blade passed in front of each other.
Interestingly preliminary modal analysis for this eroded blade
indicates several natural frequencies within the aeromechanic power
spectrum, moreover, the highest frequency component is 94% of one
natural frequency indicating near resonant condition.
Independently of other simultaneously occurring fatigue cycles
(such as thermal, centrifugal stresses).
Abstract: Embedded hardware simulator is a valuable computeraided
tool for embedded application development. This paper focuses
on the ARM926EJ-S MMU, builds state transition models and
formally verifies critical properties for the models. The state transition
models include loading instruction model, reading data model, and
writing data model. The properties of the models are described by
CTL specification language, and they are verified in VIS. The results
obtained in VIS demonstrate that the critical properties of MMU are
satisfied in the state transition models. The correct models can be
used to implement the MMU component in our simulator. In the
end of this paper, the experimental results show that the MMU can
successfully accomplish memory access requests from CPU.
Abstract: Wave generation methodology has been developed
and validated by simulating wave in CFD. In this analysis, Flap type
wave maker has been modeled numerically with wave basin to
generate waves for marine experimental analysis. Irregular waves are
arrived from the wave spectrum, and this wave has been simulated in
CFD. Generated irregular wave has been compared with an analytical
wave. Simulated wave has been processed for FFT analysis, and the
wave spectrum is validated with original wave spectrum.
Abstract: Until recently it would have been unusual to consider classifying population movements and refugees as security problem. However, efforts at shaping our world to make ourselves secure have paradoxically led to ever greater insecurity. The feeling of uncertainty, pertinent throughout all discourses of security, has led to the creation of security production into seemingly benign routines of everyday life. Yet, the paper argues, neither of security discourses accounted for, disclosed and challenged the fundamental aporias embedded in Western security narratives. In turn, the paper aims to unpick the conventional security wisdom, which is haunted with strong ontologies, embedded in the politics of Orientalism, and (in)security nexus. The paper concludes that current security affair conceals the integral impossibility of fulfilling its very own promise of assured security. The paper also provides suggestions about alternative security discourse based on mutual dialogue.
Abstract: A analysis on the conventional the blood pressure estimation method using an oscillometric sphygmomanometer was
performed through a computer simulation using an arterial pressure-volume (APV) model. Traditionally, the maximum amplitude algorithm (MAP) was applied on the oscillation waveforms of the APV model to obtain the mean arterial pressure and the characteristic ratio. The estimation of mean arterial pressure and
characteristic ratio was significantly affected with the shape of the blood pressure waveforms and the cutoff frequency of high-pass filter
(HPL) circuitry. Experimental errors are due to these effects when estimating blood pressure. To find out an algorithm independent from
the influence of waveform shapes and parameters of HPL, the volume
oscillation of the APV model and the phase shift of the oscillation with fast fourier transform (FFT) were testified while increasing the cuff
pressure from 1 mmHg to 200 mmHg (1 mmHg per second). The phase shift between the ranges of volume oscillation was then only observed between the systolic and the diastolic blood pressures. The same results were also obtained from the simulations performed on two different the arterial blood pressure waveforms and one
hyperthermia waveform.