Abstract: Drilling is the most common machining operation and it forms the highest machining cost in many manufacturing activities including automotive engine production. The outcome of this operation depends upon many factors including utilization of proper cutting tool geometry, cutting tool material and the type of coating used to improve hardness and resistance to wear, and also cutting parameters. With the availability of a large array of tool geometries, materials and coatings, is has become a challenging task to select the best tool and cutting parameters that would result in the lowest machining cost or highest profit rate. This paper describes an algorithm developed to help achieve good performances in drilling operations by automatically determination of proper cutting tools and cutting parameters. It also helps determine machining sequences resulting in minimum tool changes that would eventually reduce machining time and cost where multiple tools are used.
Abstract: Transcription factor p53 has a powerful tumor
suppressing function that is associated with many cancers. However,
p53 of the molecular weight was higher make the limitation across to
skin or cell membrane. Thymidine dinucleotide (pTT), an
oligonucleotide, can activate the p53 transcription factor. pTT is a
hydrophilic and negative charge oligonucleotide, which delivery in to
cell membrane need an appropriate carrier. The aim of this study was
to improve the bioavailability of the nucleotide fragment, thymidine
dinucleotide (pTT), using elasic liposome carriers to deliver the drug
into the skin. The study demonstrate that dioleoylphosphocholine
(DOPC) incorporated with sodium cholate at molar ratio 1:1 can
archived the particle size about 220 nm. This elastic liposome could
penetration through skin from stratum corneum to whole epidermis by
confocal laser scanning microscopy (CLSM). Moreover, we observed
the the slight increase in generation of p53 by western blot.
Abstract: Banishing hunger from the face of earth has been
frequently expressed in various international, national and regional
level conferences since 1974. Providing food security has become
important issue across the world particularly in developing countries.
In a developing country like India, where growth rate of population is
more than that of the food grains production, food security is a
question of great concern. According to the International Food Policy
Research Institute's Global Hunger Index, 2011, India ranks 67 of the
81 countries of the world with the worst food security status. After
Green Revolution, India became a food surplus country. Its
production has increased from 74.23 million tonnes in 1966-67 to
257.44 million tonnes in 2011-12. But after achieving selfsufficiency
in food during last three decades, the country is now
facing new challenges due to increasing population, climate change,
stagnation in farm productivity. Therefore, the main objective of the
present paper is to examine the food security situation at national
level in the country and further to explain the paradox of food
insecurity in a food surplus state of India i.e in Punjab at micro level.
In order to achieve the said objectives, secondary data collected from
the Ministry of Agriculture and the Agriculture department of Punjab
State was analyzed. The result of the study showed that despite
having surplus food production the country is still facing food
insecurity problem at micro level. Within the Kandi belt of Punjab
state, the area adjacent to plains is food secure while the area along
the hills falls in food insecure zone.
The present paper is divided into following three sections (i)
Introduction, (ii) Analysis of food security situation at national level
as well as micro level (Kandi belt of Punjab State) (iii) Concluding
Observations
Abstract: The broadcast problem including the plan design is
considered. The data are inserted and numbered at predefined order
into customized size relations. The server ability to create a full,
regular Broadcast Plan (RBP) with single and multiple channels after
some data transformations is examined. The Regular Geometric
Algorithm (RGA) prepares a RBP and enables the users to catch their
items avoiding energy waste of their devices. Moreover, the
Grouping Dimensioning Algorithm (GDA) based on integrated
relations can guarantee the discrimination of services with a
minimum number of channels. This last property among the selfmonitoring,
self-organizing, can be offered by servers today
providing also channel availability and less energy consumption by
using smaller number of channels. Simulation results are provided.
Abstract: This article experimentally investigates the
thermal performance of thermoelectric air-cooling module
which comprises a thermoelectric cooler (TEC) and an
air-cooling heat sink. The influences of input current and heat
load are determined. And performances under each situation
are quantified by thermal resistance analysis. Since TEC
generates Joule heat, this nature makes construction of thermal
resistance network difficult. To simplify the analysis, this
article emphasizes on the resistance heat load might meet when
passing through the device. Therefore, the thermal resistances
in this paper are to divide temperature differences by heat load.
According to the result, there exists an optimum input current
under every heating power. In this case, the optimum input
current is around 6A or 7A. The performance of the heat sink
would be improved with TEC under certain heating power and
input current, especially at a low heat load. According to the
result, the device can even make the heat source cooler than the
ambient. However, TEC is not always effective at every heat
load and input current. In some situation, the device works
worse than the heat sink without TEC. To determine the
availability of TEC, this study figures out the effective
operating region in which the TEC air-cooling module works
better than the heat sink without TEC. The result shows that
TEC is more effective at a lower heat load. If heat load is too
high, heat sink with TEC will perform worse than without TEC.
The limit of this device is 57W. Besides, TEC is not helpful if
input current is too high or too low. There is an effective range
of input current, and the range becomes narrower when the heat
load grows.
Abstract: Multimedia information availability has increased
dramatically with the advent of video broadcasting on handheld
devices. But with this availability comes problems of maintaining the
security of information that is displayed in public. ISMA Encryption
and Authentication (ISMACryp) is one of the chosen technologies for
service protection in DVB-H (Digital Video Broadcasting-
Handheld), the TV system for portable handheld devices. The
ISMACryp is encoded with H.264/AVC (advanced video coding),
while leaving all structural data as it is. Two modes of ISMACryp are
available; the CTR mode (Counter type) and CBC mode (Cipher
Block Chaining) mode. Both modes of ISMACryp are based on 128-
bit AES algorithm. AES algorithms are more complex and require
larger time for execution which is not suitable for real time
application like live TV. The proposed system aims to gain a deep
understanding of video data security on multimedia technologies and
to provide security for real time video applications using selective
encryption for H.264/AVC. Five level of security proposed in this
paper based on the content of NAL unit in Baseline Constrain profile
of H.264/AVC. The selective encryption in different levels provides
encryption of intra-prediction mode, residue data, inter-prediction
mode or motion vectors only. Experimental results shown in this
paper described that fifth level which is ISMACryp provide higher
level of security with more encryption time and the one level provide
lower level of security by encrypting only motion vectors with lower
execution time without compromise on compression and quality of
visual content. This encryption scheme with compression process
with low cost, and keeps the file format unchanged with some direct
operations supported. Simulation was being carried out in Matlab.
Abstract: One of the main advantages of the LO paradigm is to
allow the availability of good quality, shareable learning material
through the Web. The effectiveness of the retrieval process requires a
formal description of the resources (metadata) that closely fits the
user-s search criteria; in spite of the huge international efforts in this
field, educational metadata schemata often fail to fulfil this
requirement. This work aims to improve the situation, by the
definition of a metadata model capturing specific didactic features of
shareable learning resources. It classifies LOs into “teacher-oriented"
and “student-oriented" categories, in order to describe the role a LO
is to play when it is integrated into the educational process. This
article describes the model and a first experimental validation process
that has been carried out in a controlled environment.
Abstract: There are three distinct stages in the evolution of
economic thought, namely:
1. in the first stage, the major concern was to accelerate
economic growth with increased availability of material
goods, especially in developing economies with very low
living standards, because poverty eradication meant faster
economic growth.
2. in the second stage, economists made distinction between
growth and development. Development was seen as going
beyond economic growth, and bringing certain changes in
the structure of the economy with more equitable
distribution of the benefits of growth, with the growth
coming automatic and sustained.
3. the third stage is now reached. Our concern is now with
“sustainable development", that is, development not only
for the present but also of the future.
Thus the focus changed from “sustained growth" to “sustained
development". Sustained development brings to the fore the long
term relationship between the ecology and economic development.
Since the creation of UNEP in 1972 it has worked for
development without destruction for environmentally sound and
sustained development. It was realised that the environment cannot
be viewed in a vaccum, it is not separate from development, nor is it
competing. It suggested for the integration of the environment with
development whereby ecological factors enter development planning,
socio-economic policies, cost-benefit analysis, trade, technology
transfer, waste management, educational and other specific areas.
Industrialisation has contributed to the growth of economy of
several countries. It has improved the standards of living of its people
and provided benefits to the society. It has also created in the process
great environmental problems like climate change, forest destruction
and denudation, soil erosion and desertification etc.
On the other hand, industry has provided jobs and improved the
prospects of wealth for the industrialists. The working class
communities had to simply put up with the high levels of pollution in
order to keep up their jobs and also to save their income.
There are many roots of the environmental problem. They may be
political, economic, cultural and technological conditions of the
modern society. The experts concede that industrial growth lies
somewhere close to the heart of the matter. Therefore, the objective
of this paper is not to document all roots of an environmental crisis
but rather to discuss the effects of industrial growth and
development.
We have come to the conclusion that although public intervention
is often unnecessary to ensure that perfectly competitive markets will
function in society-s best interests, such intervention is necessary
when firms or consumers pollute.
Abstract: Using vision based solution in intelligent vehicle application often needs large memory to handle video stream and image process which increase complexity of hardware and software. In this paper, we present a FPGA implement of a vision based lane departure warning system. By taking frame of videos, the line gradient of line is estimated and the lane marks are found. By analysis the position of lane mark, departure of vehicle will be detected in time. This idea has been implemented in Xilinx Spartan6 FPGA. The lane departure warning system used 39% logic resources and no memory of the device. The average availability is 92.5%. The frame rate is more than 30 frames per second (fps).
Abstract: The Mobile Ad-hoc Network (MANET) is a collection of self-configuring and rapidly deployed mobile nodes (routers) without any central infrastructure. Routing is one of the potential issues. Many routing protocols are reported but it is difficult to decide which one is best in all scenarios. In this paper on demand routing protocols DSR and DYMO based on IEEE 802.11 DCF MAC protocol are examined and characteristic summary of these routing protocols is presented. Their performance is analyzed and compared on performance measuring metrics throughput, dropped packets due to non availability of routes, duplicate RREQ generated for route discovery and normalized routing load by varying CBR data traffic load using QualNet 5.0.2 network simulator.
Abstract: With the advent of inexpensive 32 bit floating point digital signal processor-s availability in market, many computationally intensive algorithms such as Kalman filter becomes feasible to implement in real time. Dynamic simulation of a self excited DC motor using second order state variable model and implementation of Kalman Filter in a floating point DSP TMS320C6713 is presented in this paper with an objective to introduce and implement such an algorithm, for beginners. A fractional hp DC motor is simulated in both Matlab® and DSP and the results are included. A step by step approach for simulation of DC motor in Matlab® and “C" routines in CC Studio® is also given. CC studio® project file details and environmental setting requirements are addressed. This tutorial can be used with 6713 DSK, which is based on floating point DSP and CC Studio either in hardware mode or in simulation mode.
Abstract: Grid computing is a group of clusters connected over
high-speed networks that involves coordinating and sharing
computational power, data storage and network resources operating
across dynamic and geographically dispersed locations. Resource
management and job scheduling are critical tasks in grid computing.
Resource selection becomes challenging due to heterogeneity and
dynamic availability of resources. Job scheduling is a NP-complete
problem and different heuristics may be used to reach an optimal or
near optimal solution. This paper proposes a model for resource and
job scheduling in dynamic grid environment. The main focus is to
maximize the resource utilization and minimize processing time of
jobs. Grid resource selection strategy is based on Max Heap Tree
(MHT) that best suits for large scale application and root node of
MHT is selected for job submission. Job grouping concept is used to
maximize resource utilization for scheduling of jobs in grid
computing. Proposed resource selection model and job grouping
concept are used to enhance scalability, robustness, efficiency and
load balancing ability of the grid.
Abstract: The purpose of this article applies the monthly final
energy yield and failure data of 202 PV systems installed in Taiwan to
analyze the PV operational performance and system availability. This
data is collected by Industrial Technology Research Institute through
manual records. Bad data detection and failure data estimation
approaches are proposed to guarantee the quality of the received
information. The performance ratio value and system availability are
then calculated and compared with those of other countries. It is
indicated that the average performance ratio of Taiwan-s PV systems
is 0.74 and the availability is 95.7%. These results are similar with
those of Germany, Switzerland, Italy and Japan.
Abstract: The innovative fuzzy estimator is used to estimate the
ground motion acceleration of the retaining structure in this study. The
Kalman filter without the input term and the fuzzy weighting recursive
least square estimator are two main portions of this method. The
innovation vector can be produced by the Kalman filter, and be
applied to the fuzzy weighting recursive least square estimator to
estimate the acceleration input over time. The excellent performance
of this estimator is demonstrated by comparing it with the use of
difference weighting function, the distinct levels of the measurement
noise covariance and the initial process noise covariance. The
availability and the precision of the proposed method proposed in this
study can be verified by comparing the actual value and the one
obtained by numerical simulation.
Abstract: The coverage probability and range of IEEE 802.16
systems depend on different wireless scenarios. Evaluating the
performance of IEEE 802.16 systems over Stanford University
Interim (SUI) channels is suggested by IEEE 802.16 specifications.
In order to derive an effective method for forecasting the coverage
probability and range, this study uses the SUI channel model to
analyze the coverage probability with Rayleigh fading for an IEEE
802.16 system. The BER of the IEEE 802.16 system is shown in the
simulation results. Then, the maximum allowed path loss can be
calculated and substituted into the coverage analysis. Therefore,
simulation results show the coverage range with and without
Rayleigh fading.
Abstract: Technical laboratories are typically considered as
highly hazardous places in the polytechnic institution when
addressing the problems of high incidences and fatality rates. In
conjunction with several topics covered in the technical curricular,
safety and health precaution should be highlighted in order to
connect to few key ideas of being safe. Therefore the assessment of
safety awareness in terms of safety and health about hazardous and
risks at laboratories is needed and has to be incorporated with
technical education and other training programmes. The purpose of
this study was to determine the efficacy of technical laboratory safety
in one of the polytechnics in northern region. The study examined
three related issues that were; the availability of safety material and
equipment, safety practice adopted by technical teachers and
administrator-s safety attitudes in enforcing safety to the students. A
model of efficacy technical laboratory was developed to test the
linear relationship between existing safety material and equipment,
teachers- safety practice and administrators- attitude in enforcing
safety and to identify which of technical laboratory safety issues was
the most pertinent factor to realize safety in technical laboratory.
This was done by analyzing survey-based data sets particularly those
obtained from samples of 210 students in the polytechnic. The
Pearson Correlation was used to measure the association between the
variables and to test the research hypotheses. The result of the study
has found that there was a significant correlation between existing
safety material and equipment, safety practice adopted by teacher
and administrator-s attitude. There was also a significant relationship
between technical laboratory safety and safety practice adopted by
teacher and between technical laboratory safety and administrator
attitude. Hence, safety practice adopted by teacher and administrator
attitude is vital in realizing technical laboratory safety.
Abstract: Natural Language Understanding Systems (NLU) will not be widely deployed unless they are technically mature and cost effective to develop. Cost effective development hinges on the availability of tools and techniques enabling the rapid production of NLU applications through minimal human resources. Further, these tools and techniques should allow quick development of applications in a user friendly way and should be easy to upgrade in order to continuously follow the evolving technologies and standards. This paper presents a visual tool for the structuring and editing of dialog forms, the key element of driving conversation in NLU applications based on IBM technology. The main focus is given on the basic component used to describe Human – Machine interactions of that kind, the Dialogue Manager. In essence, the description of a tool that enables the visual representation of the Dialogue Manager mainly during the implementation phase is illustrated.
Abstract: Oxidative stress makes up common incidents in
eukaryotic metabolism. The presence of diverse components
disturbing the equilibrium during oxygen metabolism increases
oxidative damage unspecifically in living cells. Body´s own
ubiquinone (Q10) seems to be a promising drug in defending the
heightened appearance of reactive oxygen species (ROS). Though, its
lipophilic properties require a new strategy in drug formulation to
overcome their low bioavailability. Consequently, the manufacture of
heterogeneous nanodispersions is in focus for medical applications.
The composition of conventional nanodispersions is made up of a
drug-consisting core and a surfactive agent, also named as surfactant.
Long-termed encapsulation of the surfactive components into tissues
might be the consequence of the use during medical therapeutics. The
potential of provoking side-effects is given by their nonbiodegradable
properties. Further improvements during fabrication
process use the incorporation of biodegradable components such as
modified γ-polyglutamic acid which decreases the potential of
prospective side-effects.
Abstract: Inventory decisional environment of short life-cycle
products is full of uncertainties arising from randomness and
fuzziness of input parameters like customer demand requiring
modeling under hybrid uncertainty. Prior inventory models
incorporating fuzzy demand have unfortunately ignored stochastic
variation of demand. This paper determines an unambiguous optimal
order quantity from a set of n fuzzy observations in a newsvendor
inventory setting in presence of fuzzy random variable demand
capturing both fuzzy perception and randomness of customer
demand. The stress of this paper is in providing solution procedure
that attains optimality in two steps with demand information
availability in linguistic phrases leading to fuzziness along with
stochastic variation. The first step of solution procedure identifies
and prefers one best fuzzy opinion out of all expert opinions and the
second step determines optimal order quantity from the selected
event that maximizes profit. The model and solution procedure is
illustrated with a numerical example.
Abstract: In this paper, we study the cooperative communications where multiple cognitive radio (CR) transmit-receive pairs competitive maximize their own throughputs. In CR networks, the influences of primary users and the spectrum availability are usually different among CR users. Due to the existence of multiple relay nodes and the different spectrum availability, each CR transmit-receive pair should not only select the relay node but also choose the appropriate channel. For this distributed problem, we propose a game theoretic framework to formulate this problem and we apply a regret-matching learning algorithm which is leading to correlated equilibrium. We further formulate a modified regret-matching learning algorithm which is fully distributed and only use the local information of each CR transmit-receive pair. This modified algorithm is more practical and suitable for the cooperative communications in CR network. Simulation results show the algorithm convergence and the modified learning algorithm can achieve comparable performance to the original regretmatching learning algorithm.