Abstract: In this paper, a direct method based on variable step
size Block Backward Differentiation Formula which is referred as
BBDF2 for solving second order Ordinary Differential Equations
(ODEs) is developed. The advantages of the BBDF2 method over the
corresponding sequential variable step variable order Backward
Differentiation Formula (BDFVS) when used to solve the same
problem as a first order system are pointed out. Numerical results are
given to validate the method.
Abstract: The article deals with pneumatic and hot wire
anemometry measurement on subsonic axi-symmetric air ejector.
Performances of the ejector with and without pulsations of primary
flow are compared, measuring of characteristic pressures and mass
flow rates are performed and ejector efficiency is evaluated. The
pulsations of primary flow are produced by a synthetic jet generator,
which is placed in the supply line of the primary flow just in front of
the primary nozzle. The aim of the pulsation is to intensify the
mixing process. In the article we present: Pressure measuring of
pulsation on the mixing chamber wall, behind the mixing chamber
and behind the diffuser measured by fast pressure transducers and
results of hot wire anemometry measurement. It was found out that
using of primary flow pulsations yields higher back pressure behind
the ejector and higher efficiency. The processes in this ejector and
influences of primary flow pulsations on the mixing processes are
described.
Abstract: In this article the authors are researching cultural
differences between rural and urban characters in case of
contemporary Kazakh cinema.Two motion pictures are analyzed:
“Strizh" (2007) by AbaiKulbai and “Seker" (2009) by
SabitKurmanbekov.According to the authors- opinion ateenage girl
characters in these two films reflect two cultures (urban and rural) of
Kazakh society, which displays complicated socio-cultural processes
of modern Kazakhstan.
Abstract: Antioxidant activities of ethanolic extracts of Ardisia
japonica Blume., Ageartum conyzoides Linn., and Cocculus hirsutus
Linn Diels. leaves was determined qualitatively and quantitatively in
this research. 1, 1-diphenyl-2-picrylhydrazyl (DPPH) free radical
solution was used to investigate free radical scavenging activity of
these leaves extracts. Ascorbic acid (Vitamin C) was used as the
standard. In the present investigation, it is found that all of these
extracts have remarkable antioxidant activities. The EC50 values of
these ethanolic extracts were 12.72 μg/ml for A. japonica, 15.19
μg/ml for A. conyzoides, 10.68 μg/ml for C. hirsutus respectively.
Among these Myanmar medicinal plants, C. hirsutus showed higher
antioxidant activities as well as free radical scavenging activity than
black tea (Camellia sinensis), the famous antioxidant, and A.
japonica and A. conyzoides showed a rather lower antioxidant
activity than tea extracts. According to results from bioassay with
carrot discs infected with Agrobacterium tumefaciens, all extracts
showed anti-tumor activity after 3 weeks of incubation. No gall was
detected in carrot disks treated with C. hirsutus and A. japonica
extracts in the dose of 100ppm and in carrot discs treated with A.
conyzoides extract in the dose of 1000 ppm. Therefore, the research
clearly indicates that these weedy plants of dry farm land are
exceptionally advantageous for human health.
Abstract: The indistinctness of the manufacturing processes makes that a parts cannot be realized in an absolutely exact way towards the specifications on the dimensions. It is thus necessary to assume that the effectively realized product has to belong in a very strict way to compatible intervals with a correct functioning of the parts. In this paper we present an approach based on mixing tow different characteristics theories, the fuzzy system and Petri net system. This tool has been proposed to model and control the quality in an assembly system. A robust command of a mechanical assembly process is presented as an application. This command will then have to maintain the specifications interval of parts in front of the variations. It also illustrates how the technique reacts when the product quality is high, medium, or low.
Abstract: Covering approximation spaces is a class of important
generalization of approximation spaces. For a subset X of a covering
approximation space (U, C), is X definable or rough? The
answer of this question is uncertain, which depends on covering
approximation operators endowed on (U, C). Note that there are many
various covering approximation operators, which can be endowed
on covering approximation spaces. This paper investigates covering
approximation spaces endowed ten covering approximation operators
respectively, and establishes some relations among definable subsets,
inner definable subsets and outer definable subsets in covering approximation
spaces, which deepens some results on definable subsets
in approximation spaces.
Abstract: This paper investigates the optimization problem of
multi-product aggregate production planning (APP) with fuzzy data.
From a comprehensive viewpoint of conserving the fuzziness of input
information, this paper proposes a method that can completely
describe the membership function of the performance measure. The
idea is based on the well-known Zadeh-s extension principle which
plays an important role in fuzzy theory. In the proposed solution
procedure, a pair of mathematical programs parameterized by
possibility level a is formulated to calculate the bounds of the
optimal performance measure at a . Then the membership function of
the optimal performance measure is constructed by enumerating
different values of a . Solutions obtained from the proposed method
contain more information, and can offer more chance to achieve the
feasible disaggregate plan. This is helpful to the decision-maker in
practical applications.
Abstract: Studies on residential satisfaction have been actively
discussed under family house setting. However, limited studies have
been conducted on student residential satisfaction. This study is an
attempt to fill the research gap. It focuses on the influence of socioeconomic
on students- satisfaction with the universities- student
housing facilities. The students who stayed at the on-campus student
housing were the respondents. This study employed two-stage cluster
sampling method in classifying the respondents. Self-administered
questionnaires were distributed face-to-face to the students. In
general, it is confirmed that students- socio-economic backgrounds
have influence on the students- satisfaction with their housing
facilities. The main influential factors were the students- economic
status, sense of sharing, and ethnicity of their roommates.
Furthermore, this study could also provide a useful feedback for the
universities in order to improve their student housing facilities.
Abstract: Lignocellulosic materials are new targeted source to
produce second generation biofuels like biobutanol. However, this
process is significantly resisted by the native structure of biomass.
Therefore, pretreatment process is always essential to remove
hemicelluloses and lignin prior to the enzymatic hydrolysis.
The goals of pretreatment are removing hemicelluloses and
lignin, increasing biomass porosity, and increasing the enzyme
accessibility. The main goal of this research is to study the important
variables such as pretreatment temperature and time, which can give
the highest total sugar yield in pretreatment step by using dilute
phosphoric acid. After pretreatment, the highest total sugar yield of
13.61 g/L was obtained under an optimal condition at 140°C for 10
min of pretreatment time by using 1.75% (w/w) H3PO4 and at 15:1
liquid to solid ratio. The total sugar yield of two-stage process
(pretreatment+enzymatic hydrolysis) of 27.38 g/L was obtained.
Abstract: Kuwait-s electric power system is vertically integrated
organization owned and operated by the government. For more than
five decades, the government of Kuwait has provided relatively
reliable electric services to consumers with subsidized electric
service fees. Given the country-s rapid socio-economical
development and consequently the increase of electricity demand, a
question that inflicts itself: Is it necessary to reform the power system
to face the fast growing demand? This paper recommends that the
government should consider the private sector as a partner in
operating the power system. Therefore, power system restructuring is
needed to allow such partnership. There are challenges that prevent
such restructuring. Abstract recommendations toward resolving these
challenges are proposed.
Abstract: In the previous multi-solid models,¤ò approach is
used for the calculation of fugacity in the liquid phase. For the first
time, in the proposed multi-solid thermodynamic model,γ approach
has been used for calculation of fugacity in the liquid mixture.
Therefore, some activity coefficient models have been studied that
the results show that the predictive Wilson model is more appropriate
than others. The results demonstrate γ approach using the predictive
Wilson model is in more agreement with experimental data than the
previous multi-solid models. Also, by this method, generates a new
approach for presenting stability analysis in phase equilibrium
calculations. Meanwhile, the run time in γ approach is less than the
previous methods used ¤ò approach. The results of the new model
present 0.75 AAD % (Average Absolute Deviation) from the
experimental data which is less than the results error of the previous
multi-solid models obviously.
Abstract: Biological reactions of individuals of a testing animal
to toxic substance are unique and can be used as an indication of the
existing of toxic substance. However, to distinguish such phenomenon
need a very complicate system and even more complicate to analyze
data in 3 dimensional. In this paper, a system to evaluate in vitro
biological activities to acute toxicity of stochastic self-affine
non-stationary signal of 3D goldfish swimming by using fractal
analysis is introduced. Regular digital camcorders are utilized by
proposed algorithm 3DCCPC to effectively capture and construct 3D
movements of the fish. A Critical Exponent Method (CEM) has been
adopted as a fractal estimator. The hypothesis was that the swimming
of goldfish to acute toxic would show the fractal property which
related to the toxic concentration. The experimental results supported
the hypothesis by showing that the swimming of goldfish under the
different toxic concentration has fractal properties. It also shows that
the fractal dimension of the swimming related to the pH value of FD Ôëê
0.26pH + 0.05. With the proposed system, the fish is allowed to swim
freely in all direction to react to the toxic. In addition, the trajectories
are precisely evaluated by fractal analysis with critical exponent
method and hence the results exhibit with much higher degree of
confidence.
Abstract: The need to increase the efficiency of health care
systems is becoming an obligation, and one of area of improvement
is the discharge process. The objective of this work is to minimize
the patients discharge time (for insured patients) to be less than 50
minutes by using six sigma approach, this improvement will also:
lead to an increase in customer satisfaction, increase the number of
admissions and turnover on the rooms, increase hospital
profitability.Three different departments were considered in this
study: Female, Male, and Paediatrics. Six Sigma approach coupled
with simulation has been applied to reduce the patients discharge
time for pediatrics, female, and male departments at hospital. Upon
applying these recommendations at hospital: 60%, 80%, and 22% of
insured female, male, and pediatrics patients respectively will have
discharge time less than the upper specification time i.e. 50 min.
Abstract: As every system conceptions the concept of crisis is
based on the system of interdependent elements. These dialectic
elements occur in a majority of definitions even though called
differently. For further theoretical searching but also for practical
utilization it is necessary to understand these elements. The paper
stresses that the concept of crisis is ambiguous. There are identified
and explained the elements that are generally found in most crises
(disruption, precondition, triggers etc).
Abstract: Travel demand forecasting including four travel choices, i.e., trip generation, trip distribution, modal split and traffic assignment constructs the core of transportation planning. In its current application, travel demand forecasting has associated with three important issues, i.e., interface inconsistencies among four travel choices, inefficiency of commonly used solution algorithms, and undesirable multiple path solutions. In this paper, each of the three issues is extensively elaborated. An ideal unified framework for the combined model consisting of the four travel choices and variable demand functions is also suggested. Then, a few remarks are provided in the end of the paper
Abstract: Ontologies are broadly used in the context of networked home environments. With ontologies it is possible to define and store context information, as well as to model different kinds of physical environments. Ontologies are central to networked home environments as they carry the meaning. However, ontologies and the OWL language is complex. Several ontology visualization approaches have been developed to enhance the understanding of ontologies. The domain of networked home environments sets some special requirements for the ontology visualization approach. The visualization tool presented here, visualizes ontologies in a domain-specific way. It represents effectively the physical structures and spatial relationships of networked home environments. In addition, it provides extensive interaction possibilities for editing and manipulating the visualization. The tool shortens the gap from beginner to intermediate OWL ontology reader by visualizing instances in their actual locations and making OWL ontologies more interesting and concrete, and above all easier to comprehend.
Abstract: In this paper, we propose a novel metal oxide
semiconductor field effect transistor with L-shaped channel structure
(LMOS), and several type of L-shaped structures are also designed,
studied and compared with the conventional MOSFET device for the
same average gate length (Lavg). The proposed device electrical
characteristics are analyzed and evaluated by three dimension (3-D)
ISE-TCAD simulator. It can be confirmed that the LMOS devices
have higher on-state drain current and both lower drain-induced
barrier lowering (DIBL) and subthreshold swing (S.S.) than its
conventional counterpart has. In addition, the transconductance and
voltage gain properties of the LMOS are also improved.
Abstract: The use of magnetic and magnetic/gold core/shell
nanoparticles in biotechnology or medicine has shown good promise
due to their hybrid nature which possesses superior magnetic and
optical properties. Some of these potential applications include
hyperthermia treatment, bio-separations, diagnostics, drug delivery
and toxin removal. Synthesis refinement to control geometric and
magnetic/optical properties, and finding functional surfactants for
biomolecular attachment, are requirements to meet application
specifics.
Various high-temperature preparative methods were used for the
synthesis of iron oxide and gold-coated iron oxide nanoparticles.
Different surface functionalities, such as 11-aminoundecanoic and
11-mercaptoundecanoic acid, were introduced on the surface of the
particles to facilitate further attachment of biomolecular functionality
and drug-like molecules. Nanoparticle thermal stability, composition,
state of aggregation, size and morphology were investigated and the
results from techniques such as Fourier Transform-Infra Red
spectroscopy (FT-IR), Ultraviolet visible spectroscopy (UV-vis),
Transmission Electron Microscopy (TEM) and thermal analysis are
discussed.
Abstract: Intelligent schools are those which use IT devices and
technologies as media software, hardware and networks to improve
learning process. On the other hand management improvement is
best described as the process from which managers learn and improve
their skills not only to benefit themselves but also their employing
organizations Here, we present a model Management improvement
System that has been applied on some schools and have made strict
improvement.
Abstract: The goal of this paper is to develop a model to
integrate “pricing" and “advertisement" for short life cycle products,
such as branded fashion clothing products. To achieve this goal, we
apply the concept of “Dynamic Pricing". There are two classes of
advertisements, for the brand (regardless of product) and for a
particular product. Advertising the brand affects the demand and
price of all the products. Thus, the model considers all these products
in relation with each other. We develop two different methods to
integrate both types of advertisement and pricing. The first model is
developed within the framework of dynamic programming. However,
due to the complexity of the model, this method cannot be applicable
for large size problems. Therefore, we develop another method,
called hieratical approach, which is capable of handling the real
world problems. Finally, we show the accuracy of this method, both
theoretically and also by simulation.