Abstract: In this article, a single application is suggested to determine the position of vehicles using Geographical Information Systems (GIS) and Geographical Position Systems (GPS). The part of the article material included mapping three dimensional coordinates to two dimensional coordinates using UTM or LAMBERT geographical methods, and the algorithm of conversion of GPS information into GIS maps is studied. Also, suggestions are given in order to implement this system based on web (called web based systems). To apply this system in IRAN, related official in this case are introduced and their duties are explained. Finally, economy analyzed is assisted according to IRAN communicational system.
Abstract: As the Social network game(SNG) is rising
dramatically worldwide, an interesting aspect has appeared in the
demographic analysis. That is the ratio of the game users by gender.
Although the ratio of male and female users in online game was
60:40% previously, the ratio of male and female users in SNG stood at
47:53% which shows that the ratio of female users is higher than that
of male users. Here, it should be noted that 35% in those 53% female
users are the first-time users of game. This fact suggests that women
who were not interested in game previously has taken an interest in
SNG. Notwithstanding this issue, there have been little studies on the
female users of SNG although there are many studies that analyzed the
tendency of female users- online game play. This study conducted the
analyzed how the game-playing tendency of SNG gamers was
manifested in the game by gender. For that, this study will identify the
tendency of SNG users by gender based on the preceding studies that
analyzed the online game users by gender. The subject of this study
was confined to the farm and urban construction simulation games
which were offered based on the mobile application platform.
Regarding the methodology of study, the first focus group
interview(FGI) was conducted with the male and female users who
had played games on Social network service(SNS) until recently. Later,
the second one-on-one in-depth interview was conducted to gain an
insight into the psychological state of the subjects.
Abstract: Gluconic acid is one of interesting chemical products
in industries such as detergents, leather, photographic, textile, and
especially in food and pharmaceutical industries. Fermentation is an
advantageous process to produce gluconic acid. Mathematical
modeling is important in the design and operation of fermentation
process. In fact, kinetic data must be available for modeling. The
kinetic parameters of gluconic acid production by Aspergillus niger
in batch culture was studied in this research at initial substrate
concentration of 150, 200 and 250 g/l. The kinetic models used were
logistic equation for growth, Luedeking-Piret equation for gluconic
acid formation, and Luedeking-Piret-like equation for glucose
consumption. The Kinetic parameters in the model were obtained by
minimizing non linear least squares curve fitting.
Abstract: In this paper, a novel scheme is proposed for Ownership Identification and Color Image Authentication by deploying Cryptography & Digital Watermarking. The color image is first transformed from RGB to YST color space exclusively designed for watermarking. Followed by color space transformation, each channel is divided into 4×4 non-overlapping blocks with selection of central 2×2 sub-blocks. Depending upon the channel selected two to three LSBs of each central 2×2 sub-block are set to zero to hold the ownership, authentication and recovery information. The size & position of sub-block is important for correct localization, enhanced security & fast computation. As YS ÔèÑ T so it is suitable to embed the recovery information apart from the ownership and authentication information, therefore 4×4 block of T channel along with ownership information is then deployed by SHA160 to compute the content based hash that is unique and invulnerable to birthday attack or hash collision instead of using MD5 that may raise the condition i.e. H(m)=H(m'). For recovery, intensity mean of 4x4 block of each channel is computed and encoded upto eight bits. For watermark embedding, key based mapping of blocks is performed using 2DTorus Automorphism. Our scheme is oblivious, generates highly imperceptible images with correct localization of tampering within reasonable time and has the ability to recover the original work with probability of near one.
Abstract: A sophisticated simulator provides a cost-effective measure to carry out preliminary mission testing and diagnostic while reducing potential failures for real life at sea trials. The presented simulation framework covers three key areas: AUV modeling, sensor modeling, and environment modeling. AUV modeling mainly covers the area of AUV dynamics. Sensor modeling deals with physics and mathematical models that govern each sensor installed onto the AUV. Environment model incorporates the hydrostatic, hydrodynamics, and ocean currents that will affect the AUV in a real-time mission. Based on this designed simulation framework, custom scenarios provided by the user can be modeled and its corresponding behaviors can be observed. This paper focuses on the accuracy of the simulated data from AUV model and environmental model derived from a developed AUV test-bed which was jointly upgraded by DSTO and the University of Adelaide. The main contribution of this paper is to experimentally verify the accuracy of the proposed simulation framework.
Abstract: A multi fingered dexterous anthropomorphic hand is
being developed by the authors. The focus of the hand is the
replacement of human operators in hazardous environments and also
in environments where zero tolerance is observed for the human
errors. The robotic hand will comprise of five fingers (four fingers
and one thumb) each having four degrees of freedom (DOF) which
can perform flexion, extension, abduction, adduction and also
circumduction. For the actuation purpose pneumatic muscles and
springs will be used. The paper exemplifies the mechanical design for
the robotic hand. It also describes different mechanical designs that
have been developed before date.
Abstract: The world wide web coupled with the ever-increasing
sophistication of online technologies and software applications puts
greater emphasis on the need of even more sophisticated and
consistent quality requirements modeling than traditional software
applications. Web sites and Web applications (WebApps) are
becoming more information driven and content-oriented raising the
concern about their information quality (InQ). The consistent and
consolidated modeling of InQ requirements for WebApps at different
stages of the life cycle still poses a challenge. This paper proposes an
approach to specify InQ requirements for WebApps by reusing and
extending the ISO 25012:2008(E) data quality model. We also
discuss learnability aspect of information quality for the WebApps.
The proposed ISO 25012 based InQ framework is a step towards a
standardized approach to evaluate WebApps InQ.
Abstract: The aim of this research is to develop the
understanding of corporate social responsibility (CSR) from
consumers- perspective toward Thai mobile service providers.
Based on the survey from 400 mobile customers, the result
shows that four dimensions of CSR of Thai mobile service
providers consist of economic, legal, ethical and philanthropic
responsibility. These four CSR factors have positive impacts
on enhancing customer satisfaction except one item of
economic responsibility - profitability to shareholders. Ethical
dimension has the strongest impact on customer satisfaction.
Economic, legal, ethical, philanthropic responsibility and
customer satisfaction have major impact on loyalty, whilst
philanthropic component mostly affects loyalty.
Abstract: A new and cost effective robotic device was designed
for remote tele surgery using dual tone multi frequency technology
(DTMF). Tele system with Dual Tone Multiple Frequency has a large
capability in sending and receiving of data in hardware and software.
The robot consists of DC motors for arm movements and it is
controlled manually through a mobile phone through DTMF
Technology. The system enables the surgeon from base station to
send commands through mobile phone to the patient’s robotic system
which includes two robotic arms that translate the input into actual
instrument manipulation. A mobile phone attached to the
microcontroller 8051 which can activate robot through relays. The
Remote robot-assisted tele surgery eliminates geographic constraints
for getting surgical expertise where it is needed and allows an expert
surgeon to teach or proctor the performance of surgical technique by
real-time intervention.
Abstract: Two constructions of unit-memory binary convolutional
codes from linear block codes over the finite semi-local ring F2r +vF2r , where v2 = v, are presented. In both cases, if the linear block code is systematic, then the resulting convolutional encoder
is systematic, minimal, basic and non-catastrophic. The Hamming
free distance of the convolutional code is bounded below by the
minimum Hamming distance of the block code. New examples of
binary convolutional codes that meet the Heller upper bound for
systematic codes are given.
Abstract: This paper deals with the application of Principal Component Analysis (PCA) and the Hotelling-s T2 Chart, using data collected from a drinking water treatment process. PCA is applied primarily for the dimensional reduction of the collected data. The Hotelling-s T2 control chart was used for the fault detection of the process. The data was taken from a United Utilities Multistage Water Treatment Works downloaded from an Integrated Program Management (IPM) dashboard system. The analysis of the results show that Multivariate Statistical Process Control (MSPC) techniques such as PCA, and control charts such as Hotelling-s T2, can be effectively applied for the early fault detection of continuous multivariable processes such as Drinking Water Treatment. The software package SIMCA-P was used to develop the MSPC models and Hotelling-s T2 Chart from the collected data.
Abstract: This study links up the theories of social psychology,
economics and sport management to assess the impact of sport
participation on subjective well-being (SWB) and use a simple statistic
method to estimate the relative monetary value that sport participation
derives SWB for Taiwan-s college students. By constructing proper
measurements on sport participation and SWB respectively, a
structural equation model (SEM) is developed to perform a
confirmatory factory analysis, and the causal relationship between
sport participation and SWB as well as the effect of the demographic
variables on these two concepts are also discussed.
Abstract: Cloud Computing is an approach that provides computation and storage services on-demand to clients over the network, independent of device and location. In the last few years, cloud computing became a trend in information technology with many companies that transfer their business processes and applications in the cloud. Cloud computing with service oriented architecture has contributed to rapid development of Geographic Information Systems. Open Geospatial Consortium with its standards provides the interfaces for hosted spatial data and GIS functionality to integrated GIS applications. Furthermore, with the enormous processing power, clouds provide efficient environment for data intensive applications that can be performed efficiently, with higher precision, and greater reliability. This paper presents our work on the geospatial data services within the cloud computing environment and its technology. A cloud computing environment with the strengths and weaknesses of the geographic information system will be introduced. The OGC standards that solve our application interoperability are highlighted. Finally, we outline our system architecture with utilities for requesting and invoking our developed data intensive applications as a web service.
Abstract: Hardness of the widely used structural steel is of vital
importance since it may help in the determination of many
mechanical properties of a material under loading situations. In order
to obtain reliable information for design, properties homogeneity
should be validated. In the current study the hardness variation over
the different diameters of the same AISI 4140 bar is investigated.
Measurements were taken on the two faces of the stock at equally
spaced eight sectors and fifteen layers. Statistical and graphical
analysis are performed to asses the distribution of hardness
measurements over the specified area. Hardness measurements
showed some degree of dispersion with about ± 10% of its nominal
value provided by manufacturer. Hardness value is found to have a
slight decrease trend as the diameter is reduced. However, an
opposite behavior is noticed regarding the sequence of the sector
indicating a nonuniform distribution over the same area either on the
same face or considering the corresponding sector on the other face
(cross section) of the same material bar.
Abstract: Over last two decades, due to hostilities of environment
over the internet the concerns about confidentiality of information
have increased at phenomenal rate. Therefore to safeguard the information
from attacks, number of data/information hiding methods have
evolved mostly in spatial and transformation domain.In spatial domain
data hiding techniques,the information is embedded directly on
the image plane itself. In transform domain data hiding techniques the
image is first changed from spatial domain to some other domain and
then the secret information is embedded so that the secret information
remains more secure from any attack. Information hiding algorithms
in time domain or spatial domain have high capacity and relatively
lower robustness. In contrast, the algorithms in transform domain,
such as DCT, DWT have certain robustness against some multimedia
processing.In this work the authors propose a novel steganographic
method for hiding information in the transform domain of the gray
scale image.The proposed approach works by converting the gray
level image in transform domain using discrete integer wavelet
technique through lifting scheme.This approach performs a 2-D
lifting wavelet decomposition through Haar lifted wavelet of the cover
image and computes the approximation coefficients matrix CA and
detail coefficients matrices CH, CV, and CD.Next step is to apply the
PMM technique in those coefficients to form the stego image. The
aim of this paper is to propose a high-capacity image steganography
technique that uses pixel mapping method in integer wavelet domain
with acceptable levels of imperceptibility and distortion in the cover
image and high level of overall security. This solution is independent
of the nature of the data to be hidden and produces a stego image
with minimum degradation.
Abstract: Human skull is shown to exhibit numerous sexually dimorphic traits. Estimation of sex is a challenging task especially when a part of skull is brought for medicolegal investigation. The present research was planned to evaluate the sexing potential of the dimensions of foramen magnum in forensic identification by craniometric analysis. Length and breadth of the foramen magnum was measured using Vernier calipers and the area of foramen magnum was calculated. The length, breadth, and area of foramen magnum were found to be larger in males than females. Sexual dimorphism index was calculated to estimate the sexing potential of each variable. The study observations are suggestive of the limited utility of the craniometric analysis of foramen magnum during the examination of skull and its parts in estimation of sex.
Abstract: The objective of the paper is to develop the forecast
model for the HW flows. The methodology of the research included
6 modules: historical data, assumptions, choose of indicators, data
processing, and data analysis with STATGRAPHICS, and forecast
models. The proposed methodology was validated for the case study
for Latvia. Hypothesis on the changes in HW for time period of
2010-2020 have been developed and mathematically described with
confidence level of 95.0% and 50.0%. Sensitivity analysis for the
analyzed scenarios was done. The results show that the growth of
GDP affects the total amount of HW in the country. The total amount
of the HW is projected to be within the corridor of – 27.7% in the
optimistic scenario up to +87.8% in the pessimistic scenario with
confidence level of 50.0% for period of 2010-2020. The optimistic
scenario has shown to be the least flexible to the changes in the GDP
growth.
Abstract: Among the numerous economic evaluation techniques currently available, Multi-criteria Spatial Analysis lends itself to solving localization problems of property complexes and, in particular, production plants. The methodology involves the use of Geographical Information Systems (GIS) and the mapping overlay technique, which overlaps the different information layers of a territory in order to obtain an overview of the parameters that characterize it. This first phase is used to detect possible settlement surfaces of a new agglomeration, subsequently selected through Analytic Hierarchy Process (AHP), so as to choose the best alternative. The result ensures the synthesis of a multidimensional profile that expresses both the quantitative and qualitative effects. Each criterion can be given a different weight.
Abstract: The impact of OO design on software quality
characteristics such as defect density and rework by mean of
experimental validation. Encapsulation, inheritance, polymorphism,
reusability, Data hiding and message-passing are the major attribute
of an Object Oriented system. In order to evaluate the quality of an
Object oriented system the above said attributes can act as indicators.
The metrics are the well known quantifiable approach to express any
attribute. Hence, in this paper we tried to formulate a framework of
metrics representing the attributes of object oriented system.
Empirical Data is collected from three different projects based on
object oriented paradigms to calculate the metrics.
Abstract: Computer aided design accounts with the support of
parametric software in the design of machine components as well as
of any other pieces of interest. The complexities of the element under
study sometimes offer certain difficulties to computer design, or ever
might generate mistakes in the final body conception. Reverse
engineering techniques are based on the transformation of already
conceived body images into a matrix of points which can be
visualized by the design software. The literature exhibits several
techniques to obtain machine components dimensional fields, as
contact instrument (MMC), calipers and optical methods as laser
scanner, holograms as well as moiré methods. The objective of this
research work was to analyze the moiré technique as instrument of
reverse engineering, applied to bodies of nom complex geometry as
simple solid figures, creating matrices of points. These matrices were
forwarded to a parametric software named SolidWorks to generate
the virtual object. Volume data obtained by mechanical means, i.e.,
by caliper, the volume obtained through the moiré method and the
volume generated by the SolidWorks software were compared and
found to be in close agreement. This research work suggests the
application of phase shifting moiré methods as instrument of reverse
engineering, serving also to support farm machinery element designs.