Abstract: As a learning theory tries to borrow from science a framework to found its method, it shows paradoxes and paralysing contraddictions. This results, on one hand, from adopting a learning/teaching model as it were a mere “transfer of data" (mechanical learning approach), and on the other hand from borrowing the complexity theory (an indeterministic and non-linear model), that risks to vanish every educational effort. This work is aimed at describing existing criticism, unveiling the antinomic nature of such paradoxes, focussing on a view where neither the mechanical learning perspective nor the chaotic and nonlinear model can threaten and jeopardize the educational work. Author intends to go back over the steps that led to these paradoxes and to unveil their antinomic nature. Actually this could serve the purpose to explain some current misunderstandings about the real usefulness of Ict within the youth-s learning process and growth.
Abstract: With the advent of DSL services, high data rates are now available over phone lines, yet higher rates are in demand. In this paper, we optimize the transmit filters that can be used over wireline channels. Results showing the bit error rates when optimized filters are used, and with a decision feedback equalizer (DFE) employed in the receiver, are given. We then show that significantly higher throughput can be achieved by modeling the channel as a multiple input multiple output (MIMO) channel. A receiver that employs a MIMO-DFE that deals jointly with several users is proposed and shown to provide significant improvement over the conventional DFE.
Abstract: A laboratory set-up was designed to survey the
effectiveness of UV/O3 advanced oxidation process (AOP) for the
removal of Carbaryl from polluted water in batch reactor. The study
was carried out by UV/O3 process for water samples containing 1 to
20 mg/L of Carbaryl in distilled water. Also the range of drinking
water resources adjusted in synthetic water and effects of contact
time, pH and Carbaryl concentration were studied. The residual
pesticide concentration was determined by applying high
performance liquid chromatography (HPLC). The results indicated
that increasing of retention time and pH, enhances pesticide removal
efficiency. The removal efficiency has been affected by pesticide
initial concentration. Samples with low pesticide concentration
showed a remarkable removal efficiency compared to the samples
with high pesticide concentration. AOP method showed the removal
efficiencies of 80% to 100%. Although process showed high
performance for removal of pesticide from water samples, this
process has different disadvantages including complication,
intolerability, difficulty of maintenance and equipmental and
structural requirements.
Abstract: Column leach test has been performed to examine the
behavior of leaching of sodium, calcium and potassium in landfills.
In the column leach apparatus, two different layers of contaminated
and uncontaminated soils of different height ratios (ratio of depth of
contaminated soil to the depth of uncontaminated soil) are taken.
Water is poured from an overhead tank at a particular flowrate to the
inlet of the soil column for a certain ponding depth over the
contaminated soil. Subsequent infiltration causes leaching and the
leachates are collected from the bottom of the column. The
concentrations of Na, Ca and K in the leachate are measured using
flame photometry. The experiments are further extended by changing
the rates of flow from the overhead tank to the inlet of the column in
achieving the same ponding depth. The experiments are performed
for different scenarios in which the height ratios are altered and the
variations of concentrations of Na, Ca, and K are observed. The study
brings an estimation of leaching in landfill sites for different heights
and precipitation intensity where a ponding depth is maintained over
the landfill. It has been observed that the leaching behavior of Na,
Ca, and K are not similar. Calcium exhibits highest amount of
leaching compared to Sodium and Potassium under similar
experimental conditions.
Abstract: Walking and sit to stand are activities carried out by
all the people many times during the day, but physical disabilities due
to age and diseases create needs of assistive devices to help elderly
people during their daily life. This study aims to study the different
types and mechanisms of the assistive devices. We will analyze the
limitations and the challenges faced by the researchers in this field.
We will introduce the Assistive Device developed at the Egypt-Japan
University of Science and Technology, named E-JUST Assistive
Device (EJAD). EJAD will be a low cost intelligent assistive device
to help elders in walking and sit-to-stand activities.
Abstract: This paper proposes a new decision making structure
to determine the appropriate product delivery strategy for different products in a manufacturing system among make-to-stock, make-toorder,
and hybrid strategy. Given product delivery strategies for all products in the manufacturing system, the position of the Order
Penetrating Point (OPP) can be located regarding the delivery strategies among which location of OPP in hybrid strategy is a
cumbersome task. In this regard, we employ analytic network process, because there are varieties of interrelated driving factors
involved in choosing the right location. Moreover, the proposed structure is augmented with fuzzy sets theory in order to cope with
the uncertainty of judgments. Finally, applicability of the proposed structure is proven in practice through a real industrial case company.
The numerical results demonstrate the efficiency of the proposed decision making structure in order partitioning and OPP location.
Abstract: This paper deals with the application for contentbased
image retrieval to extract color feature from natural images
stored in the image database by segmenting the image through
clustering. We employ a class of nonparametric techniques in which
the data points are regarded as samples from an unknown probability
density. Explicit computation of the density is avoided by using the
mean shift procedure, a robust clustering technique, which does not
require prior knowledge of the number of clusters, and does not
constrain the shape of the clusters. A non-parametric technique for
the recovery of significant image features is presented and
segmentation module is developed using the mean shift algorithm to
segment each image. In these algorithms, the only user set parameter
is the resolution of the analysis and either gray level or color images
are accepted as inputs. Extensive experimental results illustrate
excellent performance.
Abstract: This paper present a circular patch microstrip array antenna operate in KU-band (10.9GHz – 17.25GHz). The proposed circular patch array antenna will be in light weight, flexible, slim and compact unit compare with current antenna used in KU-band. The paper also presents the detail steps of designing the circular patch microstrip array antenna. An Advance Design System (ADS) software is used to compute the gain, power, radiation pattern, and S11 of the antenna. The proposed Circular patch microstrip array antenna basically is a phased array consisting of 'n' elements (circular patch antennas) arranged in a rectangular grid. The size of each element is determined by the operating frequency. The incident wave from satellite arrives at the plane of the antenna with equal phase across the surface of the array. Each 'n' element receives a small amount of power in phase with the others. There are feed network connects each element to the microstrip lines with an equal length, thus the signals reaching the circular patches are all combined in phase and the voltages add up. The significant difference of the circular patch array antenna is not come in the phase across the surface but in the magnitude distribution.
Abstract: In this paper, we propose the pre-processor based on
the Evidence Supporting Measure of Similarity (ESMS) filter and also
propose the unified fusion approach (UFA) based on the general
fusion machine coupled with ESMS filter, which improve the
correctness and precision of information fusion in any fields of
application. Here we mainly apply the new approach to Simultaneous
Localization And Mapping (SLAM) of Pioneer II mobile robots. A
simulation experiment was performed, where an autonomous virtual
mobile robot with sonar sensors evolves in a virtual world map with
obstacles. By comparing the result of building map according to the
general fusion machine (here DSmT-based fusing machine and
PCR5-based conflict redistributor considereded) coupling with ESMS
filter and without ESMS filter, it shows the benefit of the selection of
the sources as a prerequisite for improvement of the information
fusion, and also testifies the superiority of the UFA in dealing with
SLAM.
Abstract: In this study it is aimed to determine the level of preservice teachers- computer phobia. Whether or not computer phobia meaningfully varies statistically according to gender and computer experience has been tested in the study. The study was performed on 430 pre-service teachers at the Education Faculty in Rize/Turkey. Data in the study were collected through the Computer Phobia Scale consisting of the “Personal Knowledge Questionnaire", “Computer Anxiety Rating Scale", and “Computer Thought Survey". In this study, data were analyzed with statistical processes such as t test, and correlation analysis. According to results of statistical analyses, computer phobia of male pre-service teachers does not statistically vary depending on their gender. Although male preservice teachers have higher computer anxiety scores, they have lower computer thought scores. It was also observed that there is a negative and intensive relation between computer experience and computer anxiety. Meanwhile it was found out that pre-service teachers using computer regularly indicated lower computer anxiety. Obtained results were tried to be discussed in terms of the number of computer classes in the Education Faculty curriculum, hours of computer class and the computer availability of student teachers.
Abstract: This research aimed to study the market feasibility for
new brand coffee house, the case study of Thailand.. This study is a
mixed methods research combining quantitative research and the
qualitative research. Primary data 350 sets of questionnaires were
distributed, and the high quality completed questionnaires of 320 sets
returned. Research samples are identified as customers’ of Hi-end
department stores in Thailand. The sources of secondary data were
critical selected from highly reliable sources, both from public and
private sectors. The results were used to classify the customer group
into two main groups, the younger than 25 and the older than 25years
old. Results of the younger group, are give priority to the dimension
of coffee house and its services dimension more than others, then
branding dimension and the product dimension respectively. On the
other hand, the older group give the difference result as they rate the
important of the branding, coffee house and its services, then the
product respectively. Coffee consuming is not just the trend but it
has become part of people lifestyle. And the new cultures also created
by the wise businessman. Coffee was long produced and consumed in
Thailand. But it is surprisingly the hi-end brand coffee houses in Thai
market are mostly imported brands. The café business possibility for
Thai brand coffee house in Thai market were discussed in the paper.
Abstract: Human middle-ear is the key component of the
auditory system. Its function is to transfer the sound waves through
the ear canal to provide sufficient stimulus to the fluids of the inner
ear. Degradation of the ossicles that transmit these sound waves from
the eardrum to the inner ear leads to hearing loss. This problem can
be overcome by replacing one or more of these ossicles by middleear
prosthesis. Designing such prosthesis requires a comprehensive
knowledge of the biomechanics of the middle-ear. There are many
finite element modeling approaches developed to understand the
biomechanics of the middle ear. The available models in the
literature, involve high computation time. In this paper, we propose a
simplified model which provides a reasonably accurate result with
much less computational time. Simulation results indicate a
maximum sound pressure gain of 10 dB at 5500 Hz.
Abstract: In this paper we use data mining techniques to investigate factors that contribute significantly to enhancing the risk of acute coronary syndrome. We assume that the dependent variable is diagnosis – with dichotomous values showing presence or absence of disease. We have applied binary regression to the factors affecting the dependent variable. The data set has been taken from two different cardiac hospitals of Karachi, Pakistan. We have total sixteen variables out of which one is assumed dependent and other 15 are independent variables. For better performance of the regression model in predicting acute coronary syndrome, data reduction techniques like principle component analysis is applied. Based on results of data reduction, we have considered only 14 out of sixteen factors.
Abstract: In this study, solid phase micro-extraction (SPME)
was optimized to improve the sensitivity and accuracy in
formaldehyde determination for plywood panels. Further work has
been carried out to compare the newly developed technique with
existing method which reacts formaldehyde collected in desiccators
with acetyl acetone reagent (DC-AA). In SPME, formaldehyde was
first derivatized with O-(2,3,4,5,6 pentafluorobenzyl)-hydroxylamine
hydrochloride (PFBHA) and analysis was then performed by gas
chromatography in combination with mass spectrometry (GC-MS).
SPME data subjected to various wood species gave satisfactory
results, with relative standard deviations (RSDs) obtained in the
range of 3.1-10.3%. It was also well correlated with DC values,
giving a correlation coefficient, RSQ, of 0.959. The quantitative
analysis of formaldehyde by SPME was an alternative in wood
industry with great potential
Abstract: In the last decades, the problem of perforation
damage has been considered as the major factor for the
reduction of oil productivity. Underbalance perforation is
considered as one of the best means to minimize or overcome
this problem. By maintaining wellbore pressure lower than
formation pressure, perforation damage could be minimize or
eliminated. This can be achieved by the use of nontraditional
lightweight completion fluid. This paper presents the effect of
natural clay in formulating nontraditional completion fluid to
ensure successful perforation job and increase of production
rate. Natural clay is used as homogenizing agent to create a
stable and non-damaging low-density completion fluid.
Results indicate that the addition of natural clay dramatically
increase the stability of the final fluids. In addition, field test
has shown that the application of nontraditional completion
fluid increases oil production by three folds.
Abstract: This paper focuses on the experimental impacts of
ultrasonic, carbonate and a combination of them on the quality of
fresh kiwi juice. Today, non-thermal methods like ultrasonic, which
have imperceptible effects on some properties of the juice such as
taste, flavor and color, are commonly used for killing
microorganisms.In this paper, some properties of kiwi fruit juice
under ultrasonic, carbonate and a combination of them has been
researched. Those properties include pH, acidity, transparency and
Brix. Its impact on microorganisms has been studied as well.The
results show that using a combination of carbonate and sonicate make
the cavitation more severe without a perceptible effect on nonactivation
of microorganisms.
Abstract: In this paper we describe our efforts to design and
implement an agent development framework that has the potential to
scale to the size of any underlying network suitable for various ECommerce
activities. The main novelty in our framework is it-s
capability to allow the development of sophisticated, secured agents
which are simple enough to be practical.
We have adopted FIPA agent platform reference Model as
backbone for implementation along with XML for agent
Communication and Java Cryptographic Extension and architecture
to realize the security of communication information between agents.
The advantage of our architecture is its support of agents
development in different languages and Communicating with each
other using a more open standard i.e. XML
Abstract: This study was designed to determine effect of
supplemented tomato pomace and fobrolytic enzyme on egg
production and egg quality. A total of 40 CP brown laying hens (95
week old) were used in completely randomized design in 2x2
factorial arrangement with or without enzyme supplementation. Four
dietary treatments included: Control (C), Fibrolytic enzyme (FE),
10% Tomato pomace (TP), and Fibrolytic enzyme + 10 % Tomato
pomace (FE+TP). Each of the four dietary treatments was fed up to
30 days (10 birds/treatment). Live performance, egg production, egg
weight and quality were determined for whole period. Dietary
treatments had no effect (P>0.05) on live performance, egg weight,
yolk color, and egg production. Therefore, laying hens fed diets with
fibrolytic enzyme were significantly (P
Abstract: Degradation of polymeric insulation systems of
electrical equipments increases the space charge density and the
concentration of electrical dipoles. By consequence, the maximum
values and the slopes of absorption/resorption (A/R) currents can
change with insulation systems ageing. In this paper, an analysis of
the nature of the A/R currents and the importance of their
components, especially the polarization current and the current given
by the space charge, is presented. The experimental study concerns
the A/R currents measurements of plane samples (made from
CALMICAGLAS tapes), virgin and thermally accelerated aged. The
obtained results show that the ageing process produces an increase of
the values and a decrease of shapes of the A/R currents. Finally, the
possibility of estimating insulations ageing state and lifetime from
A/R currents measurements is discussed.
Abstract: A lot of computer-based methods have been developed
to assess the evacuation capability (EC) of high-rise buildings.
Because softwares are time-consuming and not proper for on scene
applications, we adopted two methods, fuzzy analytic hierarchy
process (FAHP) and technique for order preference by similarity to an
ideal solution (TOPSIS), for EC assessment of a high-rise building in
Jinan. The EC scores obtained with the two methods and the
evacuation time acquired with Pathfinder 2009 for floors 47-60 of the
building were compared with each other. The results show that FAHP
performs better than TOPSIS for EC assessment of high-rise buildings,
especially in the aspect of dealing with the effect of occupant type and
distance to exit on EC, tackling complex problem with multi-level
structure of criteria, and requiring less amount of computation.
However, both FAHP and TOPSIS failed to appropriately handle the
situation where the exit width changes while occupants are few.