Circular Patch Microstrip Array Antenna for KU-band
This paper present a circular patch microstrip array antenna operate in KU-band (10.9GHz – 17.25GHz). The proposed circular patch array antenna will be in light weight, flexible, slim and compact unit compare with current antenna used in KU-band. The paper also presents the detail steps of designing the circular patch microstrip array antenna. An Advance Design System (ADS) software is used to compute the gain, power, radiation pattern, and S11 of the antenna. The proposed Circular patch microstrip array antenna basically is a phased array consisting of 'n' elements (circular patch antennas) arranged in a rectangular grid. The size of each element is determined by the operating frequency. The incident wave from satellite arrives at the plane of the antenna with equal phase across the surface of the array. Each 'n' element receives a small amount of power in phase with the others. There are feed network connects each element to the microstrip lines with an equal length, thus the signals reaching the circular patches are all combined in phase and the voltages add up. The significant difference of the circular patch array antenna is not come in the phase across the surface but in the magnitude distribution.
[1] G. O. Young, "Synthetic structure of industrial plastics (Book style with
paper title and editor)," in Plastics, 2nd ed. vol. 3, J. Peters, Ed. New
York: McGraw-Hill, 1964, pp. 15-64.
[2] W.-K. Chen, Linear Networks and Systems (Book style). Belmont, CA:
Wadsworth, 1993, pp. 123-135.
[3] H. Poor, An Introduction to Signal Detection and Estimation. New
York: Springer-Verlag, 1985, ch. 4.
[4] B. Smith, "An approach to graphs of linear forms (Unpublished work
style)," unpublished.
[5] E. H. Miller, "A note on reflector arrays (Periodical styleÔÇöAccepted for
publication)," IEEE Trans. Antennas Propagat., to be published.
[6] J. Wang, "Fundamentals of erbium-doped fiber amplifiers arrays
(Periodical styleÔÇöSubmitted for publication)," IEEE J. Quantum
Electron., submitted for publication.
[7] C. J. Kaufman, Rocky Mountain Research Lab., Boulder, CO, private
communication, May 1995.
[8] Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, "Electron spectroscopy
studies on magneto-optical media and plastic substrate
interfaces(Translation Journals style)," IEEE Transl. J. Magn.Jpn., vol.
2, Aug. 1987, pp. 740-741 [Dig. 9th Annu. Conf. Magnetics Japan, 1982,
p. 301].
[9] M. Young, The Techincal Writers Handbook. Mill Valley, CA:
University Science, 1989.
[10] J. U. Duncombe, "Infrared navigationÔÇöPart I: An assessment of
feasibility (Periodical style)," IEEE Trans. Electron Devices, vol. ED-
11, pp. 34-39, Jan. 1959.
[11] S. Chen, B. Mulgrew, and P. M. Grant, "A clustering technique for
digital communications channel equalization using radial basis function
networks," IEEE Trans. Neural Networks, vol. 4, pp. 570-578, July
1993.
[12] R. W. Lucky, "Automatic equalization for digital communication," Bell
Syst. Tech. J., vol. 44, no. 4, pp. 547-588, Apr. 1965.
[13] S. P. Bingulac, "On the compatibility of adaptive controllers (Published
Conference Proceedings style)," in Proc. 4th Annu. Allerton Conf.
Circuits and Systems Theory, New York, 1994, pp. 8-16.
[14] G. R. Faulhaber, "Design of service systems with priority reservation,"
in Conf. Rec. 1995 IEEE Int. Conf. Communications, pp. 3-8.
[15] W. D. Doyle, "Magnetization reversal in films with biaxial anisotropy,"
in 1987 Proc. INTERMAG Conf., pp. 2.2-1-2.2-6.
[16] G. W. Juette and L. E. Zeffanella, "Radio noise currents n short sections
on bundle conductors (Presented Conference Paper style)," presented at
the IEEE Summer power Meeting, Dallas, TX, June 22-27, 1990, Paper
90 SM 690-0 PWRS.
[17] J. G. Kreifeldt, "An analysis of surface-detected EMG as an amplitudemodulated
noise," presented at the 1989 Int. Conf. Medicine and
Biological Engineering, Chicago, IL.
[18] J. Williams, "Narrow-band analyzer (Thesis or Dissertation style),"
Ph.D. dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA,
1993.
[19] N. Kawasaki, "Parametric study of thermal and chemical nonequilibrium
nozzle flow," M.S. thesis, Dept. Electron. Eng., Osaka Univ., Osaka,
Japan, 1993.
[20] J. P. Wilkinson, "Nonlinear resonant circuit devices (Patent style)," U.S.
Patent 3 624 12, July 16, 1990.
[21] IEEE Criteria for Class IE Electric Systems (Standards style), IEEE
Standard 308, 1969.
[22] Letter Symbols for Quantities, ANSI Standard Y10.5-1968.
[23] R. E. Haskell and C. T. Case, "Transient signal propagation in lossless
isotropic plasmas (Report style)," USAF Cambridge Res. Lab.,
Cambridge, MA Rep. ARCRL-66-234 (II), 1994, vol. 2.
[24] E. E. Reber, R. L. Michell, and C. J. Carter, "Oxygen absorption in the
Earth-s atmosphere," Aerospace Corp., Los Angeles, CA, Tech. Rep.
TR-0200 (420-46)-3, Nov. 1988.
[25] (Handbook style) Transmission Systems for Communications, 3rd ed.,
Western Electric Co., Winston-Salem, NC, 1985, pp. 44-60.
[26] Motorola Semiconductor Data Manual, Motorola Semiconductor
Products Inc., Phoenix, AZ, 1989.
[27] (Basic Book/Monograph Online Sources) J. K. Author. (year, month,
day). Title (edition) [Type of medium]. Volume(issue). Available:
http://www.(URL)
[28] J. Jones. (1991, May 10). Networks (2nd ed.) (Online). Available:
http://www.atm.com
[1] G. O. Young, "Synthetic structure of industrial plastics (Book style with
paper title and editor)," in Plastics, 2nd ed. vol. 3, J. Peters, Ed. New
York: McGraw-Hill, 1964, pp. 15-64.
[2] W.-K. Chen, Linear Networks and Systems (Book style). Belmont, CA:
Wadsworth, 1993, pp. 123-135.
[3] H. Poor, An Introduction to Signal Detection and Estimation. New
York: Springer-Verlag, 1985, ch. 4.
[4] B. Smith, "An approach to graphs of linear forms (Unpublished work
style)," unpublished.
[5] E. H. Miller, "A note on reflector arrays (Periodical styleÔÇöAccepted for
publication)," IEEE Trans. Antennas Propagat., to be published.
[6] J. Wang, "Fundamentals of erbium-doped fiber amplifiers arrays
(Periodical styleÔÇöSubmitted for publication)," IEEE J. Quantum
Electron., submitted for publication.
[7] C. J. Kaufman, Rocky Mountain Research Lab., Boulder, CO, private
communication, May 1995.
[8] Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, "Electron spectroscopy
studies on magneto-optical media and plastic substrate
interfaces(Translation Journals style)," IEEE Transl. J. Magn.Jpn., vol.
2, Aug. 1987, pp. 740-741 [Dig. 9th Annu. Conf. Magnetics Japan, 1982,
p. 301].
[9] M. Young, The Techincal Writers Handbook. Mill Valley, CA:
University Science, 1989.
[10] J. U. Duncombe, "Infrared navigationÔÇöPart I: An assessment of
feasibility (Periodical style)," IEEE Trans. Electron Devices, vol. ED-
11, pp. 34-39, Jan. 1959.
[11] S. Chen, B. Mulgrew, and P. M. Grant, "A clustering technique for
digital communications channel equalization using radial basis function
networks," IEEE Trans. Neural Networks, vol. 4, pp. 570-578, July
1993.
[12] R. W. Lucky, "Automatic equalization for digital communication," Bell
Syst. Tech. J., vol. 44, no. 4, pp. 547-588, Apr. 1965.
[13] S. P. Bingulac, "On the compatibility of adaptive controllers (Published
Conference Proceedings style)," in Proc. 4th Annu. Allerton Conf.
Circuits and Systems Theory, New York, 1994, pp. 8-16.
[14] G. R. Faulhaber, "Design of service systems with priority reservation,"
in Conf. Rec. 1995 IEEE Int. Conf. Communications, pp. 3-8.
[15] W. D. Doyle, "Magnetization reversal in films with biaxial anisotropy,"
in 1987 Proc. INTERMAG Conf., pp. 2.2-1-2.2-6.
[16] G. W. Juette and L. E. Zeffanella, "Radio noise currents n short sections
on bundle conductors (Presented Conference Paper style)," presented at
the IEEE Summer power Meeting, Dallas, TX, June 22-27, 1990, Paper
90 SM 690-0 PWRS.
[17] J. G. Kreifeldt, "An analysis of surface-detected EMG as an amplitudemodulated
noise," presented at the 1989 Int. Conf. Medicine and
Biological Engineering, Chicago, IL.
[18] J. Williams, "Narrow-band analyzer (Thesis or Dissertation style),"
Ph.D. dissertation, Dept. Elect. Eng., Harvard Univ., Cambridge, MA,
1993.
[19] N. Kawasaki, "Parametric study of thermal and chemical nonequilibrium
nozzle flow," M.S. thesis, Dept. Electron. Eng., Osaka Univ., Osaka,
Japan, 1993.
[20] J. P. Wilkinson, "Nonlinear resonant circuit devices (Patent style)," U.S.
Patent 3 624 12, July 16, 1990.
[21] IEEE Criteria for Class IE Electric Systems (Standards style), IEEE
Standard 308, 1969.
[22] Letter Symbols for Quantities, ANSI Standard Y10.5-1968.
[23] R. E. Haskell and C. T. Case, "Transient signal propagation in lossless
isotropic plasmas (Report style)," USAF Cambridge Res. Lab.,
Cambridge, MA Rep. ARCRL-66-234 (II), 1994, vol. 2.
[24] E. E. Reber, R. L. Michell, and C. J. Carter, "Oxygen absorption in the
Earth-s atmosphere," Aerospace Corp., Los Angeles, CA, Tech. Rep.
TR-0200 (420-46)-3, Nov. 1988.
[25] (Handbook style) Transmission Systems for Communications, 3rd ed.,
Western Electric Co., Winston-Salem, NC, 1985, pp. 44-60.
[26] Motorola Semiconductor Data Manual, Motorola Semiconductor
Products Inc., Phoenix, AZ, 1989.
[27] (Basic Book/Monograph Online Sources) J. K. Author. (year, month,
day). Title (edition) [Type of medium]. Volume(issue). Available:
http://www.(URL)
[28] J. Jones. (1991, May 10). Networks (2nd ed.) (Online). Available:
http://www.atm.com
@article{"International Journal of Electrical, Electronic and Communication Sciences:54527", author = "T.F.Lai and Wan Nor Liza Mahadi and Norhayati Soin", title = "Circular Patch Microstrip Array Antenna for KU-band", abstract = "This paper present a circular patch microstrip array antenna operate in KU-band (10.9GHz – 17.25GHz). The proposed circular patch array antenna will be in light weight, flexible, slim and compact unit compare with current antenna used in KU-band. The paper also presents the detail steps of designing the circular patch microstrip array antenna. An Advance Design System (ADS) software is used to compute the gain, power, radiation pattern, and S11 of the antenna. The proposed Circular patch microstrip array antenna basically is a phased array consisting of 'n' elements (circular patch antennas) arranged in a rectangular grid. The size of each element is determined by the operating frequency. The incident wave from satellite arrives at the plane of the antenna with equal phase across the surface of the array. Each 'n' element receives a small amount of power in phase with the others. There are feed network connects each element to the microstrip lines with an equal length, thus the signals reaching the circular patches are all combined in phase and the voltages add up. The significant difference of the circular patch array antenna is not come in the phase across the surface but in the magnitude distribution.
", keywords = "Circular patch microstrip array antenna, gain,radiation pattern, S-Parameter.", volume = "2", number = "12", pages = "2705-5", }
