Abstract: Vernonia divergens Benth., commonly known as
“Insulin Plant” (Fam: Asteraceae) is a potent sugar killer. Locally the
leaves of the plant, boiled in water are successfully administered to a
large number of diabetic patients. The present study evaluates the
putative anti-diabetic ingredients, isolated from the in vivo and in
vitro grown plantlets of V. divergens for their antimicrobial and
anticancer activities. Sterilized explants of nodal segments were
cultured on MS (Musashige and Skoog, 1962) medium in presence of
different combinations of hormones. Multiple shoots along with
bunch of roots were regenerated at 1mg l-1 BAP and 0.5 mg l-1 NAA.
Micro-plantlets were separated and sub-cultured on the double
strength (2X) of the above combination of hormones leading to
increased length of roots and shoots. These plantlets were
successfully transferred to soil and survived well in nature. The
ethanol extract of plantlets from both in vivo & in vitro sources were
prepared in soxhlet extractor and then concentrated to dryness under
reduced pressure in rotary evaporator. Thus obtainedconcentrated
extracts showed significant inhibitory activity against gram
negative bacteria like Escherichia coli and Pseudomonas
aeruginosa but no inhibition was found against gram positive
bacteria. Further, these ethanol extracts were screened for in vitro
percentage cytotoxicity at different time periods (24 h, 48 h and 72 h)
of different dilutions. The in vivo plant extract inhibited the growth of
EAC mouse cell lines in the range of 65, 66, 78, and 88% at 100, 50,
25 & 12.5μg mL-1 but at 72 h of treatment. In case of the extract of in
vitro origin, the inhibition was found against EAC cell lines even at
48h. During spectrophotometric scanning, the extracts exhibited
different maxima (ʎ) - four peaks in in vitro extracts as against single
in in vivo preparation suggesting the possible change in the nature of
ingredients during micropropagation through tissue culture
techniques.
Abstract: In this paper, a fiber based Fabry-Perot interferometer
is proposed and demonstrated for a non-contact displacement
measurement. A piece of micro-prism which attached to the
mechanical vibrator is served as the target reflector. Interference
signal is generated from the superposition between the sensing beam
and the reference beam within the sensing arm of the fiber sensor.
This signal is then converted to the displacement value by using a
developed program written in visual Cµ programming with a
resolution of λ/8. A classical function generator is operated for
controlling the vibrator. By fixing an excitation frequency of 100 Hz
and varying the excitation amplitude range of 0.1 – 3 Volts, the
output displacements measured by the fiber sensor are obtained from
1.55 μm to 30.225 μm. A reference displacement sensor with a
sensitivity of ~0.4 μm is also employed for comparing the
displacement errors between both sensors. We found that over the
entire displacement range, a maximum and average measurement
error are obtained of 0.977% and 0.44% respectively.
Abstract: Cooperative organizations in Malaysia are going
through a phase of rapid growth. They are seen by the government as
another crucial vehicle to drive and boost up the country-s
economical development and growth. Hence, the issue of cooperative
governance is of great importance. Unlike literatures on corporate
governance for public listed companies-, literatures on governance
for social enterprises, in particular the cooperative organizations are
still at the early stage in Malaysia and very scant in number. This
paper will look into current practices as well as issues and challenges
related to cooperative governance. The need for a better solution
towards forming best practices of cooperative governance framework
appears imperative in deterring cases of mismanagement and fraud.
Abstract: Energy dissipation in drops has been investigated by
physical models. After determination of effective parameters on the
phenomenon, three drops with different heights have been
constructed from Plexiglas. They have been installed in two existing
flumes in the hydraulic laboratory. Several runs of physical models
have been undertaken to measured required parameters for
determination of the energy dissipation. Results showed that the
energy dissipation in drops depend on the drop height and discharge.
Predicted relative energy dissipations varied from 10.0% to 94.3%.
This work has also indicated that the energy loss at drop is mainly
due to the mixing of the jet with the pool behind the jet that causes
air bubble entrainment in the flow. Statistical model has been
developed to predict the energy dissipation in vertical drops denotes
nonlinear correlation between effective parameters. Further an
artificial neural networks (ANNs) approach was used in this paper to
develop an explicit procedure for calculating energy loss at drops
using NeuroSolutions. Trained network was able to predict the
response with R2 and RMSE 0.977 and 0.0085 respectively. The
performance of ANN was found effective when compared to
regression equations in predicting the energy loss.
Abstract: In this paper, we will implement three-dimensional pursuit guidance law with feedback linearization control method and study the effects of parameters. First, we introduce guidance laws and equations of motion of a missile. Pursuit guidance law is our highlight. We apply feedback linearization control method to obtain the accelerations to implement pursuit guidance law. The solution makes warhead direction follow with line-of-sight. Final, the simulation results show that the exact solution derived in this paper is correct and some factors e.g. control gain, time delay, are important to implement pursuit guidance law.
Abstract: The paper provides a numerical investigation of the
entropy generation analysis due to natural convection in an inclined
square porous cavity. The coupled equations of mass, momentum,
energy and species conservation are solved using the Control Volume
Finite-Element Method. Effect of medium permeability and
inclination angle on entropy generation is analysed. It was found that
according to the Darcy number and the porous thermal Raleigh
number values, the entropy generation could be mainly due to heat
transfer or to fluid friction irreversibility and that entropy generation
reaches extremum values for specific inclination angles.
Abstract: With optimized bandwidth and latency discrepancy ratios, Node Gain Scores (NGSs) are determined and used as a basis for shaping the max-heap overlay. The NGSs - determined as the respective bandwidth-latency-products - govern the construction of max-heap-form overlays. Each NGS is earned as a synergy of discrepancy ratio of the bandwidth requested with respect to the estimated available bandwidth, and latency discrepancy ratio between the nodes and the source node. The tree leads to enhanceddelivery overlay multicasting – increasing packet delivery which could, otherwise, be hindered by induced packet loss occurring in other schemes not considering the synergy of these parameters on placing the nodes on the overlays. The NGS is a function of four main parameters – estimated available bandwidth, Ba; individual node's requested bandwidth, Br; proposed node latency to its prospective parent (Lp); and suggested best latency as advised by source node (Lb). Bandwidth discrepancy ratio (BDR) and latency discrepancy ratio (LDR) carry weights of α and (1,000 - α ) , respectively, with arbitrary chosen α ranging between 0 and 1,000 to ensure that the NGS values, used as node IDs, maintain a good possibility of uniqueness and balance between the most critical factor between the BDR and the LDR. A max-heap-form tree is constructed with assumption that all nodes possess NGS less than the source node. To maintain a sense of load balance, children of each level's siblings are evenly distributed such that a node can not accept a second child, and so on, until all its siblings able to do so, have already acquired the same number of children. That is so logically done from left to right in a conceptual overlay tree. The records of the pair-wise approximate available bandwidths as measured by a pathChirp scheme at individual nodes are maintained. Evaluation measures as compared to other schemes – Bandwidth Aware multicaSt architecturE (BASE), Tree Building Control Protocol (TBCP), and Host Multicast Tree Protocol (HMTP) - have been conducted. This new scheme generally performs better in terms of trade-off between packet delivery ratio; link stress; control overhead; and end-to-end delays.
Abstract: Unsatisfactory effectiveness of software systems
development and enhancement projects is one of the main reasons
why in software engineering there are attempts being made to use
experiences coming from other engineering disciplines. In spite of
specificity of software product and process a belief had come out that
the execution of software could be more effective if these objects
were subject to measurement – as it is true in other engineering
disciplines for which measurement is an immanent feature. Thus
objective and reliable approaches to the measurement of software
processes and products have been sought in software engineering for
several dozens of years already. This may be proved, among others,
by the current version of CMMI for Development model. This paper
is aimed at analyzing the approach to the software processes and
products measurement proposed in the latest version of this very
model, indicating growing acceptance for this issue in software
engineering.
Abstract: In this work, I present a review on Sparse Distributed
Memory for Small Cues (SDMSCue), a variant of Sparse Distributed
Memory (SDM) that is capable of handling small cues. I then conduct
and show some cognitive experiments on SDMSCue to test its
cognitive soundness compared to SDM. Small cues refer to input
cues that are presented to memory for reading associations; but have
many missing parts or fields from them. The original SDM failed to
handle such a problem. SDMSCue handles and overcomes this
pitfall. The main idea in SDMSCue; is the repeated projection of the
semantic space on smaller subspaces; that are selected based on the
input cue length and pattern. This process allows for Read/Write
operations using an input cue that is missing a large portion.
SDMSCue is augmented with the use of genetic algorithms for
memory allocation and initialization. I claim that SDM functionality
is a subset of SDMSCue functionality.
Abstract: In a none-super-competitive environment the concepts
of closed system, management control remains to be the dominant
guiding concept to management. The merits of closed loop have been
the sources of most of the management literature and culture for
many decades. It is a useful exercise to investigate and poke into the
dynamics of the control loop phenomenon and draws some lessons to
use for refining the practice of management. This paper examines the
multitude of lessons abstracted from the behavior of the Input /output
/feedback control loop model, which is the core of control theory.
There are numerous lessons that can be learned from the insights this
model would provide and how it parallels the management dynamics
of the organization. It is assumed that an organization is basically a
living system that interacts with the internal and external variables. A
viable control loop is the one that reacts to the variation in the
environment and provide or exert a corrective action. In managing
organizations this is reflected in organizational structure and
management control practices. This paper will report findings that
were a result of examining several abstract scenarios that are
exhibited in the design, operation, and dynamics of the control loop
and how they are projected on the functioning of the organization.
Valuable lessons are drawn in trying to find parallels and new
paradigms, and how the control theory science is reflected in the
design of the organizational structure and management practices. The
paper is structured in a logical and perceptive format. Further
research is needed to extend these findings.
Abstract: In this paper, we investigate the influence of Ssemipermutable and weakly S-supplemented subgroups on the pnilpotency of finite groups. Some recent results are generalized.
Abstract: Electronics Products that achieve high levels of integrated communications, computing and entertainment, multimedia features in small, stylish and robust new form factors are winning in the market place. Due to the high costs that an industry may undergo and how a high yield is directly proportional to high profits, IC (Integrated Circuit) manufacturers struggle to maximize yield, but today-s customers demand miniaturization, low costs, high performance and excellent reliability making the yield maximization a never ending research of an enhanced assembly process. With factors such as minimum tolerances, tighter parameter variations a systematic approach is needed in order to predict the assembly process. In order to evaluate the quality of upcoming circuits, yield models are used which not only predict manufacturing costs but also provide vital information in order to ease the process of correction when the yields fall below expectations. For an IC manufacturer to obtain higher assembly yields all factors such as boards, placement, components, the material from which the components are made of and processes must be taken into consideration. Effective placement yield depends heavily on machine accuracy and the vision of the system which needs the ability to recognize the features on the board and component to place the device accurately on the pads and bumps of the PCB. There are currently two methods for accurate positioning, using the edge of the package and using solder ball locations also called footprints. The only assumption that a yield model makes is that all boards and devices are completely functional. This paper will focus on the Monte Carlo method which consists in a class of computational algorithms (information processed algorithms) which depends on repeated random samplings in order to compute the results. This method utilized in order to recreate the simulation of placement and assembly processes within a production line.
Abstract: High-frequency (HF) communications have been used by military organizations for more than 90 years. The opportunity of very long range communications without the need for advanced equipment makes HF a convenient and inexpensive alternative of satellite communications. Besides the advantages, voice and data transmission over HF is a challenging task, because the HF channel generally suffers from Doppler shift and spread, multi-path, cochannel interference, and many other sources of noise. In constructing an HF data modem, all these effects must be taken into account. STANAG 4539 is a NATO standard for high-speed data transmission over HF. It allows data rates up to 12800 bps over an HF channel of 3 kHz. In this work, an efficient implementation of STANAG 4539 on a single Texas Instruments- TMS320C6747 DSP chip is described. The state-of-the-art algorithms used in the receiver and the efficiency of the implementation enables real-time high-speed data / digitized voice transmission over poor HF channels.
Abstract: A numbers of important developments have led to an
increasing attractiveness for very high speed electrical machines
(either motor or generator). Specifically the increasing switching
speed of power electronics, high energy magnets, high strength
retaining materials, better high speed bearings and improvements in
design analysis are the primary drivers in a move to higher speed. The
design challenges come in the mechanical design both in terms of
strength and resonant modes and in the electromagnetic design
particularly in respect of iron losses and ac losses in the various
conducting parts including the rotor. This paper describes detailed
design work which has been done on a 50,000 rpm, 50kW permanent
magnet( PM) synchronous machine. It describes work on
electromagnetic and rotor eddy current losses using a variety of
methods including both 2D finite element analysis
Abstract: The objective of this research is to develop an advanced driver assistance system characterized with the functions of lane departure warning (LDW), forward collision warning (FCW) and adaptive front-lighting system (AFS). The system is mainly configured a CCD/CMOS camera to acquire the images of roadway ahead in association with the analysis made by an image-processing unit concerning the lane ahead and the preceding vehicles. The input image captured by a camera is used to recognize the lane and the preceding vehicle positions by image detection and DROI (Dynamic Range of Interesting) algorithms. Therefore, the system is able to issue real-time auditory and visual outputs of warning when a driver is departing the lane or driving too close to approach the preceding vehicle unwittingly so that the danger could be prevented from occurring. During the nighttime, in addition to the foregoing warning functions, the system is able to control the bending light of headlamp to provide an immediate light illumination when making a turn at a curved lane and adjust the level automatically to reduce the lighting interference against the oncoming vehicles driving in the opposite direction by the curvature of lane and the vanishing point estimations. The experimental results show that the integrated vehicle image system is robust to most environments such as the lane detection and preceding vehicle detection average accuracy performances are both above 90 %.
Abstract: Temperature, relative humidity and overhygroscopic
moisture fields in a sandstone wall provided with interior thermal
insulation were calculated in order to assess the hygric performance
of the retrofitted wall. Computational simulations showed that during
the time period of 10 years which was subject of investigation no
overhygroscopic moisture appeared in the analyzed building
envelope so that it performed in a satisfactory way from the hygric
point of view.
Abstract: Direct fermentation of 226 white rose tapioca stem to
ethanol by Fusarium oxysporum was studied in a batch reactor.
Fermentation of ethanol can be achieved by sequential pretreatment
using dilute acid and dilute alkali solutions using 100 mesh tapioca
stem particles. The quantitative effects of substrate concentration, pH
and temperature on ethanol concentration were optimized using a full
factorial central composite design experiment. The optimum process
conditions were then obtained using response surface methodology.
The quadratic model indicated that substrate concentration of 33g/l,
pH 5.52 and a temperature of 30.13oC were found to be optimum for
maximum ethanol concentration of 8.64g/l. The predicted optimum
process conditions obtained using response surface methodology was
verified through confirmatory experiments. Leudeking-piret model
was used to study the product formation kinetics for the production
of ethanol and the model parameters were evaluated using
experimental data.
Abstract: On the basis of Bayesian inference using the
maximizer of the posterior marginal estimate, we carry out phase
unwrapping using multiple interferograms via generalized mean-field
theory. Numerical calculations for a typical wave-front in remote
sensing using the synthetic aperture radar interferometry, phase
diagram in hyper-parameter space clarifies that the present method
succeeds in phase unwrapping perfectly under the constraint of
surface- consistency condition, if the interferograms are not corrupted
by any noises. Also, we find that prior is useful for extending a phase
in which phase unwrapping under the constraint of the
surface-consistency condition. These results are quantitatively
confirmed by the Monte Carlo simulation.
Abstract: In this paper, a new pseudo affine projection (AP)
algorithm based on Gauss-Seidel (GS) iterations is proposed for
acoustic echo cancellation (AEC). It is shown that the algorithm is
robust against near-end signal variations (including double-talk).
Abstract: We present the results of a case study aiming to assess the reflection of the tourism community in the Web and its usability to propose new ways to communicate visually. The wealth of information contained in the Web and the clear facilities to communicate personals points of view makes of the social web a new space of exploration. In this way, social web allow the sharing of information between communities with similar interests. However, the tourism community remains unexplored as is the case of the information covered in travel stories. Along the Web, we find multiples sites allowing the users to communicate their experiences and personal points of view of a particular place of the world. This cultural heritage is found in multiple documents, usually very little supplemented with photos, so they are difficult to explore due to the lack of visual information. This paper explores the possibility of analyzing travel stories to display them visually on maps and generate new knowledge such as patterns of travel routes. This way, travel narratives published in electronic formats can be very important especially to the tourism community because of the great amount of knowledge that can be extracted. Our approach is based on the use of a Geoparsing Web Service to extract geographic coordinates from travel narratives in order to draw the geo-positions and link the documents into a map image.