Abstract: Nowadays, the plant location selection has a critical
impact on the performance of numerous companies. In this paper, a
methodology is presented to solve this problem. The three decision
making methods, namely Delphi, AHP and improved VIKOR, are
hybridized in order to make the best use of information available
based on the decision makers or experts. In this respect, the aim of
using Delphi is to select the most influential criteria by a few decision
makers. The AHP is utilized to give weights of the selected criteria.
Finally, the improved VIKOR method is applied to rank alternatives.
At the end of paper, an application example demonstrates the
applicability of the proposed methodology.
Abstract: This paper discusses coordinated reactive power -
voltage (Q-V) control in a multi machine steam power plant. The
drawbacks of manual Q-V control are briefly listed, and the design
requirements for coordinated Q-V controller are specified.
Theoretical background and mathematical model of the new
controller are presented next followed by validation of developed
Matlab/Simulink model through comparison with recorded
responses in real steam power plant and description of practical
realisation of the controller. Finally, the performance of
commissioned controller is illustrated on several examples of
coordinated Q-V control in real steam power plant and compared
with manual control.
Abstract: This study investigated the ecological effects of
particulate pollution from a cement factory on the vegetation in the
western Mediterranean coastal desert of Egypt. Variations in
vegetation, soil chemical characters, and some responses of Atriplex
halimus, as a dominant species in the study area, were investigated in
some sites located in different directions from the cement factory
between Burg El-Arab in the east and El-Hammam in the west. The
results showed an obvious decrease in vegetation diversity, in
response to cement-kiln dust pollution, that accompanied by a high
dominance attributed to the high contribution of Atriplex halimus.
Annual species were found to be more sensitive to cement dust
pollution as they all failed to persist in highly disturbed sites. It is
remarkable that cover and phytomass of Atriplex halimus were
increased greatly in response to cement dust pollution, and this was
accompanied by a reduction in the mature seeds and leaf-area of the
plant. The few seeds of the affected individuals seemed to be more
fertile and attained higher germination percentages and exhibited
hardening against drought stress.
Abstract: This study carried out to determine the effect of plant
densities on some agronomic characteristics of four safflower cultivars in spring planting. The experiment was conducted at Yazd,
Iran- using a factorial in a randomized complete block design with four replications. Cultivars were including Arak, IL, Asteria and Local and plant densities were 10, 13.3, 20 and 40 plant/m2. Number
of seeds/head, number of heads/plant, HI, 1000-seed weight and seed yield significantly decreased as planting density increased. With increasing planting density, LAI, plant height, first branch height and
biological yield increased. The highest seed yield was obtained in 13.3 plant/m2 (2167 kg/ha). There were significant differences
between cultivars. Local cv. had higher seed yield than the other cultivars mainly due to higher heads/plant and seeds/head.
Abstract: Contamination of heavy metals represents one of the
most pressing threats to water and soil resources as well as human
health. Phytoremediation can be potentially used to remediate metalcontaminated
sites. A major step towards the development of
phytoremediation of heavy metal impacted soils is the discovery of
the heavy metal hyperaccumulation in plants. In this study, the
several established criteria to define a hyperaccumulator plant were
applied. The case study was represented by a mining area in
Hamedan province in the central west part of Iran. Obtained results
showed that the most of sampled species were able to grow on
heavily metal-contaminated soils and also were able to accumulate
extraordinarily high concentrations of some metals such as Zn, Mn,
Cu, Pb and Fe. Using the most common criteria, Euphorbia
macroclada and Centaurea virgata can be classified as
hyperaccumulators of some measured heavy metals and, therefore,
they have suitable potential for phytoremediation of contaminated
soils.
Abstract: The environmental factors such as temperature and
relative humidity are very contribute to the effect of comfort, health,
performance and worker productivity. To ensure an ergonomics work
environment, it is possible to require a specific attention especially in
industries. The aim of this study is to show the effect of temperature
and relative humidity on worker productivity in automotive industry
by taking a workstation in an automotive plant as the location to
conduct the study. From the analysis of the data, there were
relationship between temperature and relative humidity on worker
productivity. Mathematical equation to represent the relationship
between temperatures and relative humidity on the production rate is
modelled. From the equation model, the production rate for the
workstation can be predicted base on the value of temperature and
relative humidity.
Abstract: This paper analyses the torsional efforts in gas turbine-generator shafts caused by high speed automatic reclosing of transmission lines. This issue is especially important for cases of three phase short circuit and unsuccessful reclosure of lines in the vicinity of the thermal plant. The analysis was carried out for the thermal plant TERMOPERNAMBUCO located on Northeast region of Brazil. It is shown that stress level caused by lines unsuccessful reclosing can be several times higher than terminal three-phase short circuit. Simulations were carried out with detailed shaft torsional model provided by machine manufacturer and with the “Alternative Transient Program – ATP" program [1]. Unsuccessful three phase reclosing for selected lines in the area closed to the plant indicated most critical cases. Also, reclosing first the terminal next to the gas turbine gererator will lead also to the most critical condition. Considering that the values of transient torques are very sensible to the instant of reclosing, simulation of unsuccessful reclosing with statistics ATP switch were carried out for determination of most critical transient torques for each section of the generator turbine shaft.
Abstract: In this paper the authors propose a flexible electronic solution, to improve the energetic efficiency of a thermo plant. This is achieved by replacing the mechanical gear box, placed traditionally between a gas turbine and a synchronous generator; by a power electronic converter. After reminding problematic of gear boxes and interest of a proposed electronic solution in high power plants, the authors describe a new control strategy for an indirect frequency converter, which is characterized by its high efficiency due to the use of SWM: Square Wave Modulation. The main advantage of this mode is the quasi absence of switching losses. A control method is also proposed to resolve some problems incurred by using square wave modulation, in particular to reduce the harmonics distortion of the output inverter voltage and current. Simulation examples as well as experimental results are included.
Abstract: The potential of antioxidant activities of the plant
extract Gynura procumbens, Achyranthes aspera and Polygenum
tomentosum were studied by using 1, 1-diphenyl-2-picrylhydrazyl
(DPPH) .Antioxidant activity was qualitatively and quantitatively
determined. In this analysis , Ascorbic acid (Vitamin C) was used as
the standard .The antioxidant activities were observed all three plant
extracts and the EC50 values of G procumbens A.aspera and
P.tomemtosum were 13.7 μg /ml,14.37 μg /ml and 14.35 μg /ml.
Among these plants, G.procumbens is more potent antioxidant
activity then others. Antitumor activities were found with A.aspera
(s2) extracts in the dose of 100ppm in carrot disks and G.procumbens
(s1) and P.tomentosum (s3) in the dose of 1000 ppm. Therefore, these
herbal plants are used in traditional medicines.
Abstract: In this study, the forty Thai medicinal plants were
used to screen the antibacterial activity against Campylobacter jejuni.
Crude 95% ethanolic extracts of each plant were prepared.
Antibacterial activity was investigated by the disc diffusion assay,
and MICs and MBCs were determined by broth microdilution. The
results of antibacterial screening showed that five plants have activity
against C.jejuni including Adenanthera pavonina L., Moringa
oleifera Lam., Annona squamosa L., Hibiscus sabdariffa L. and
Eupotorium odortum L. The extraction of A. pavonina L. and A.
squamosa L. produced an outstanding against C. jejuni, inhibiting
growth at 62.5-125 and 250-500 μg/mL, respectively. The MBCs of
two extracts were just 4-fold higher than MICs against C. jejuni,
suggesting the extracts are bactericidal against this species. These
results indicate that A. pavonina and A. squamosa could potentially
be used in modern applications aimed at treatment or prevention of
foodborne disease from C. jejuni.
Abstract: In this study, in order to clarify wind-induced
phenomena, especially vertical mixing of density stratification in a
closed water area with floating-leaved plants, we conducted hydraulic
experiments on wind flow characteristics, wind wave characteristics,
entrainment phenomena and turbulent structure by using a wind tunnel
test tank and simulated floating-leaved plants. From the experimental
results of wind flow and wind wave characteristics, we quantified the
impact of the occupancy rate of the plants on their resistance
characteristics. From the experimental results of entrainment
phenomena, we defined the parameter that could explain the
magnitude of mixing between the density stratifications, and
quantified the impact of the occupancy rate on vertical mixing
between stratifications. From the experimental results of the turbulent
structure of the upper layer, we clarified the differences in small-scale
turbulence components at each occupancy rate and quantified the
impact of the occupancy rate on the turbulence characteristics. For a
summary of this study, we theoretically quantified wind-induced
entrainment phenomena in a closed water area with luxuriant growth
of floating-leaved plants. The results indicated that the impact of
luxuriant growth of floating-leaved plants in a closed water body
could be seen in the difference in small-scale fluid characteristics, and
these characteristics could be expressed using the small-scale
turbulent components.
Abstract: A high performance clarification system has been
discussed for advanced aqueous reprocessing of FBR spent fuel.
Dissolver residue gives the cause of troubles on the plant operation of
reprocessing. In this study, the new clarification system based on the
hybrid of centrifuge and filtration was proposed to get the high
separation ability of the component of whole insoluble sludge. The
clarification tests of simulated solid species were carried out to
evaluate the clarification performance using small-scale test apparatus
of centrifuge and filter unit. The density effect of solid species on the
collection efficiency was mainly evaluated in the centrifugal
clarification test. In the filtration test using ceramic filter with pore
size of 0.2μm, on the other hand, permeability and filtration rate
were evaluated in addition to the filtration efficiency. As results, it was
evaluated that the collection efficiency of solid species on the new
clarification system was estimated as nearly 100%. In conclusion, the
high clarification performance of dissolver liquor can be achieved by
the hybrid of the centrifuge and filtration system.
Abstract: This paper presents a design method of self-tuning
Quantitative Feedback Theory (QFT) by using improved deadbeat
control algorithm. QFT is a technique to achieve robust control with
pre-defined specifications whereas deadbeat is an algorithm that
could bring the output to steady state with minimum step size.
Nevertheless, usually there are large peaks in the deadbeat response.
By integrating QFT specifications into deadbeat algorithm, the large
peaks could be tolerated. On the other hand, emerging QFT with
adaptive element will produce a robust controller with wider
coverage of uncertainty. By combining QFT-based deadbeat
algorithm and adaptive element, superior controller that is called selftuning
QFT-based deadbeat controller could be achieved. The output
response that is fast, robust and adaptive is expected. Using a grain
dryer plant model as a pilot case-study, the performance of the
proposed method has been evaluated and analyzed. Grain drying
process is very complex with highly nonlinear behaviour, long delay,
affected by environmental changes and affected by disturbances.
Performance comparisons have been performed between the
proposed self-tuning QFT-based deadbeat, standard QFT and
standard dead-beat controllers. The efficiency of the self-tuning QFTbased
dead-beat controller has been proven from the tests results in
terms of controller’s parameters are updated online, less percentage
of overshoot and settling time especially when there are variations in
the plant.
Abstract: A total of 33,680 nuclear power plants (NPPs) workers were monitored and recorded from 1990 to 2007. According to the record, the average individual radiation dose has been decreasing continually from it 3.20 mSv/man in 1990 to 1.12 mSv/man at the end of 2007. After the International Commission on Radiological Protection (ICRP) 60 recommendation was generalized in South Korea, no nuclear power plant workers received above 20 mSv radiation, and the numbers of relatively highly exposed workers have been decreasing continuously. The age distribution of radiation workers in nuclear power plants was composed of mainly 20-30- year-olds (83%) for 1990 ~ 1994 and 30-40-year-olds (75%) for 2003 ~ 2007. The difference in individual average dose by age was not significant. Most (77%) of NPP radiation exposures from 1990 to 2007 occurred mostly during the refueling period. With regard to exposure type, the majority of exposures were external exposures, representing 95% of the total exposures, while internal exposures represented only 5%. External effective dose was affected mainly by gamma radiation exposure, with an insignificant amount of neutron exposure. As for internal effective dose, tritium (3H) in the pressurized heavy water reactor (PHWR) was the biggest cause of exposure.
Abstract: This paper presents the optimal design and development
of an axial flux motor for blood pump application. With the design
objective of maximizing the motor efficiency and torque, different
topologies of AFPM machine has been examined. Selection of
optimal magnet fraction, Halbach arrangement of rotor magnets and
the use of Soft Magnetic Composite (SMC) material for the stator
core results in a novel motor with improved efficiency and torque
profile. The results of the 3D Finite element analysis for the novel
motor have been shown.
Abstract: The paper describes the evaluation of quality of
control for cases of controlled non-minimal phase plants. Control
circuits containing non-minimal phase plants have different
properties, they manifest reversed reaction at the beginning of unit
step response. For these types of plants are developed special
criterion of quality of control, which considers the difference and can
be helpful for synthesis of optimal controller tuning. All results are
clearly presented using Matlab/Simulink models.
Abstract: Most paddy rice fields in East Asia are small parcels,
and the weather conditions during the growing season are usually
cloudy. FORMOSAT-2 multi-spectral images have an 8-meter
resolution and one-day recurrence, ideal for mapping paddy rice fields
in East Asia. To map rice fields, this study first determined the
transplanting and the most active tillering stages of paddy rice and
then used multi-temporal images to distinguish different growing
characteristics between paddy rice and other ground covers. The
unsupervised ISODATA (iterative self-organizing data analysis
techniques) and supervised maximum likelihood were both used to
discriminate paddy rice fields, with training areas automatically
derived from ten-year cultivation parcels in Taiwan. Besides original
bands in multi-spectral images, we also generated normalized
difference vegetation index and experimented with object-based
pre-classification and post-classification. This paper discusses results
of different image classification methods in an attempt to find a
precise and automatic solution to mapping paddy rice in Taiwan.
Abstract: This paper presented a proposed design for
transcutaneous inductive powering links. The design used to transfer
power and data to the implanted devices such as implanted
Microsystems to stimulate and monitoring the nerves and muscles.
The system operated with low band frequency 13.56 MHZ according
to industrial- scientific – medical (ISM) band to avoid the tissue
heating. For external part, the modulation index is 13 % and the
modulation rate 7.3% with data rate 1 Mbit/s assuming Tbit=1us. The
system has been designed using 0.35-μm fabricated CMOS
technology. The mathematical model is given and the design is
simulated using OrCAD P Spice 16.2 software tool and for real-time
simulation the electronic workbench MULISIM 11 has been used.
The novel circular plane (pancake) coils was simulated using
ANSOFT- HFss software.
Abstract: Drought is one of the most important natural disasters which is probable to occur in all regions with completely different climates and in addition to causing death. It results in many economic losses and social consequences. For this reason. Studying the effects and losses caused by drought which include limitation or shortage of agricultural and drinking water resources. Decreased rainfall and increased evapotranspiration. Limited plant growth and decreased agricultural products. Especially those of dry-farming. Lower levels of surface and ground waters and increased immigrations. Etc. in the country is statistical period (1988-2007) for six stations in Roudbar town were used for statistical analysis and calculating humid and dry years. The dependable rainfall index (DRI) was the main method used in this research. Results showed that during the said statistical period and also during the years 1996-1998 and 2007. more than half of the stations had faced drought. With consideration of the conducted studies. Drawing diagrams and comparing the available data with those of dry and humid years it was found that drought affected agricultural products (e.g.olive) in a way that during the year 1996 1996 drought. Olive groves of Roudbar suffered the greatest damages. Whereupon about 70% of the crops were lost.
Abstract: A nonlinear optimal controller with a fuzzy gain
scheduler has been designed and applied to a Line-Of-Sight (LOS)
stabilization system. Use of Linear Quadratic Regulator (LQR)
theory is an optimal and simple manner of solving many control
engineering problems. However, this method cannot be utilized
directly for multigimbal LOS systems since they are nonlinear in
nature. To adapt LQ controllers to nonlinear systems at least a
linearization of the model plant is required. When the linearized
model is only valid within the vicinity of an operating point a gain
scheduler is required. Therefore, a Takagi-Sugeno Fuzzy Inference
System gain scheduler has been implemented, which keeps the
asymptotic stability performance provided by the optimal feedback
gain approach. The simulation results illustrate that the proposed
controller is capable of overcoming disturbances and maintaining a
satisfactory tracking performance.