Abstract: Based on the component approach, three kinds of
dynamic load models, including a single –motor model, a two-motor
model and composite load model have been developed for the
stability studies of Khuzestan power system. The study results are
presented in this paper. Voltage instability is a dynamic phenomenon
and therefore requires dynamic representation of the power system
components. Industrial loads contain a large fraction of induction
machines. Several models of different complexity are available for
the description investigations. This study evaluates the dynamic
performances of several dynamic load models in combination with
the dynamics of a load changing transformer. Case study is steel
industrial substation in Khuzestan power systems.
Abstract: In the recent years, high dynamic range imaging has
gain popularity with the advancement in digital photography. In this
contribution we present a subjective evaluation of various tone
production and tone mapping techniques by a number of participants.
Firstly, standard HDR images were used and the participants were
asked to rate them based on a given rating scheme. After that, the
participant was asked to rate HDR image generated using linear and
nonlinear combination approach of multiple exposure images. The
experimental results showed that linearly generated HDR images
have better visualization than the nonlinear combined ones. In
addition, Reinhard et al. and the exponential tone mapping operators
have shown better results compared to logarithmic and the Garrett et
al. tone mapping operators.
Abstract: Effectiveness of Artificial Neural Networks (ANN)
and Support Vector Machines (SVM) classifiers for fault diagnosis of
rolling element bearings are presented in this paper. The
characteristic features of vibration signals of rotating driveline that
was run in its normal condition and with faults introduced were used
as input to ANN and SVM classifiers. Simple statistical features such
as standard deviation, skewness, kurtosis etc. of the time-domain
vibration signal segments along with peaks of the signal and peak of
power spectral density (PSD) are used as features to input the ANN
and SVM classifier. The effect of preprocessing of the vibration
signal by Discreet Wavelet Transform (DWT) prior to feature
extraction is also studied. It is shown from the experimental results
that the performance of SVM classifier in identification of bearing
condition is better then ANN and pre-processing of vibration signal
by DWT enhances the effectiveness of both ANN and SVM classifier
Abstract: The electromagnetic spectrum is a natural resource
and hence well-organized usage of the limited natural resources is the
necessities for better communication. The present static frequency
allocation schemes cannot accommodate demands of the rapidly
increasing number of higher data rate services. Therefore, dynamic
usage of the spectrum must be distinguished from the static usage to
increase the availability of frequency spectrum. Cognitive radio is not
a single piece of apparatus but it is a technology that can incorporate
components spread across a network. It offers great promise for
improving system efficiency, spectrum utilization, more effective
applications, reduction in interference and reduced complexity of
usage for users. Cognitive radio is aware of its environmental,
internal state, and location, and autonomously adjusts its operations
to achieve designed objectives. It first senses its spectral environment
over a wide frequency band, and then adapts the parameters to
maximize spectrum efficiency with high performance. This paper
only focuses on the analysis of Bit-Error-Rate in cognitive radio by
using Particle Swarm Optimization Algorithm. It is theoretically as
well as practically analyzed and interpreted in the sense of
advantages and drawbacks and how BER affects the efficiency and
performance of the communication system.
Abstract: One challenging direction of mobile commerce (mcommerce)
that is getting a great deal of attention globally is mobile
financing. The smart-phone and PDA users all around the world are
facing difficulties to become accustomed and trust in m-commerce.
The main rationale can be the slow variation and lack of trust in
mobile payment systems. Mobile payment systems that are in use
need to be more effective and efficient. This paper proposes: the
interface design is not the only factor affecting the m-commerce
adoption and lack of trust; in fact it is the combined effect of
interface usability and trustworthy mobile payment systems, because
it-s the money that the user has to spend at the end of the day, which
the user requires to get transferred securely. The purpose of this
research is to identify the problems regarding the trust and adaption
of m-commerce applications by mobile users and to provide the best
possible solution with respect to human computer interaction (HCI)
principles.
Abstract: It is crucial to quantitatively evaluate the treatment of
epilepsy patients. This study was undertaken to test the hypothesis that
compared to the healthy control subjects, the epilepsy patients have
abnormal resting-state connectivity. In this study, we used the
imaginary part of coherency to measure the resting-state connectivity.
The analysis results shown that compared to the healthy control
subjects, epilepsy patients tend to have abnormal rhythm brain
connectivity over their epileptic focus.
Abstract: Well-being has been given special emphasis in quality
of life. It involves living a meaningful, life satisfaction, stability and
happiness in life. Well-being also concerns the satisfaction of
physical, psychological, social needs and demands of an individual.
The purpose of this study was to validate three-factor measurement
model of well-being using structural equation modeling (SEM). The
conceptions of well-being measured such dimensions as physical,
psychological and social well-being. This study was done based on a
total sample of 650 adolescents from east-coast of peninsular
Malaysia. The Well-Being Scales which was adapted from [1] was
used in this study. The items were hypothesized a priori to have nonzero
loadings on all dimensions in the model. The findings of the
SEM demonstrated that it is a good fitting model which the proposed
model fits the driving theory; (x2df = 1.268; GFI = .994; CFI = .998;
TLI= .996; p = .255; RMSEA = .021). Composite reliability (CR)
was .93 and average variance extracted (AVE) was 58%. The model
in this study fits with the sample of data and well-being is important
to bring sustainable development to the mainstream.
Abstract: The vertex connectivity of a graph is the smallest number of vertices whose deletion separates the graph or makes it trivial. This work is devoted to the problem of vertex connectivity test of graphs in a distributed environment based on a general and a constructive approach. The contribution of this paper is threefold. First, using a preconstructed spanning tree of the considered graph, we present a protocol to test whether a given graph is 2-connected using only local knowledge. Second, we present an encoding of this protocol using graph relabeling systems. The last contribution is the implementation of this protocol in the message passing model. For a given graph G, where M is the number of its edges, N the number of its nodes and Δ is its degree, our algorithms need the following requirements: The first one uses O(Δ×N2) steps and O(Δ×logΔ) bits per node. The second one uses O(Δ×N2) messages, O(N2) time and O(Δ × logΔ) bits per node. Furthermore, the studied network is semi-anonymous: Only the root of the pre-constructed spanning tree needs to be identified.
Abstract: In this research, Response Surface Methodology (RSM) is used to investigate the effect of four controllable input variables namely: discharge current, pulse duration, pulse off time and applied voltage Surface Roughness (SR) of on Electrical Discharge Machined surface. To study the proposed second-order polynomial model for SR, a Central Composite Design (CCD) is used to estimation the model coefficients of the four input factors, which are alleged to influence the SR in Electrical Discharge Machining (EDM) process. Experiments were conducted on AISI D2 tool steel with copper electrode. The response is modeled using RSM on experimental data. The significant coefficients are obtained by performing Analysis of Variance (ANOVA) at 5% level of significance. It is found that discharge current, pulse duration, and pulse off time and few of their interactions have significant effect on the SR. The model sufficiency is very satisfactory as the Coefficient of Determination (R2) is found to be 91.7% and adjusted R2-statistic (R2 adj ) 89.6%.
Abstract: Prospective readers can quickly determine whether a document is relevant to their information need if the significant phrases (or keyphrases) in this document are provided. Although keyphrases are useful, not many documents have keyphrases assigned to them, and manually assigning keyphrases to existing documents is costly. Therefore, there is a need for automatic keyphrase extraction. This paper introduces a new domain independent keyphrase extraction algorithm. The algorithm approaches the problem of keyphrase extraction as a classification task, and uses a combination of statistical and computational linguistics techniques, a new set of attributes, and a new machine learning method to distinguish keyphrases from non-keyphrases. The experiments indicate that this algorithm performs better than other keyphrase extraction tools and that it significantly outperforms Microsoft Word 2000-s AutoSummarize feature. The domain independence of this algorithm has also been confirmed in our experiments.
Abstract: The psychological and physical trauma associated with the loss of a human limb can severely impact on the quality of life of an amputee rendering even the most basic of tasks very difficult. A prosthetic device can be of great benefit to the amputee in the performance of everyday human tasks. This paper outlines a proposed mechanical design of a 12 degree-of-freedom SMA actuated artificial hand. It is proposed that the SMA wires be embedded intrinsically within the hand structure which will allow for significant flexibility for use either as a prosthetic hand solution, or as part of a complete lower arm prosthetic solution. A modular approach is taken in the design facilitating ease of manufacture and assembly, and more importantly, also allows the end user to easily replace SMA wires in the event of failure. A biomimetric approach has been taken during the design process meaning that the artificial hand should replicate that of a human hand as far as is possible with due regard to functional requirements. The proposed design has been exposed to appropriate loading through the use of finite element analysis (FEA) to ensure that it is structurally sound. Theoretical analysis of the mechanical framework was also carried out to establish the limits of the angular displacement and velocity of the finger tip as well finger tip force generation. A combination of various polymers and Titanium, which are suitably lightweight, are proposed for the manufacture of the design.
Abstract: The objective of this project is to produce computer
assisted instruction(CAI) for welding and brazing in order to
determine the efficiency of the instruction package and the study
accomplishment of learner by studying through computer assisted
instruction for welding and brazing it was examined through the
target group surveyed from the 30 students studying in the two year
of 5-year-academic program, department of production technology
education, faculty of industrial education and technology, king
mongkut-s university of technology thonburi. The result of the
research indicated that the media evaluated by experts and subject
matter quality evaluation of computer assisted instruction for welding
and brazing was in line for the good criterion. The mean of score
evaluated before the study, during the study and after the study was
34.58, 83.33 and 83.43, respectively. The efficiency of the lesson was
83.33/83.43 which was higher than the expected value, 80/80. The
study accomplishment of the learner, who utilizes computer assisted
instruction for welding and brazing as a media, was higher and equal
to the significance statistical level of 95%. The value was 1.669
which was equal to 35.36>1.669. It could be summarized that
computer assisted instruction for welding and brazing was the
efficient media to use for studying and teaching.
Abstract: Data mining uses a variety of techniques each of which
is useful for some particular task. It is important to have a deep
understanding of each technique and be able to perform sophisticated
analysis. In this article we describe a tool built to simulate a variation
of the Kohonen network to perform unsupervised clustering and
support the entire data mining process up to results visualization. A
graphical representation helps the user to find out a strategy to
optimize classification by adding, moving or delete a neuron in order
to change the number of classes. The tool is able to automatically
suggest a strategy to optimize the number of classes optimization, but
also support both tree classifications and semi-lattice organizations of
the classes to give to the users the possibility of passing from one
class to the ones with which it has some aspects in common.
Examples of using tree and semi-lattice classifications are given to
illustrate advantages and problems. The tool is applied to classify
macroeconomic data that report the most developed countries- import
and export. It is possible to classify the countries based on their
economic behaviour and use the tool to characterize the commercial
behaviour of a country in a selected class from the analysis of
positive and negative features that contribute to classes formation.
Possible interrelationships between the classes and their meaning are
also discussed.
Abstract: In automatic manufacturing and assembling of mechanical, electrical and electronic parts one needs to reliably identify the position of components and to extract the information of these components. Data Matrix Codes (DMC) are established by these days in many areas of industrial manufacturing thanks to their concentration of information on small spaces. In today’s usually order-related industry, where increased tracing requirements prevail, they offer further advantages over other identification systems. This underlines in an impressive way the necessity of a robust code reading system for detecting DMC on the components in factories. This paper compares two methods for estimating the angle of orientation of Data Matrix Codes: one method based on the Hough Transform and the other based on the Mean Shift Algorithm. We concentrate on Data Matrix Codes in industrial environment, punched, milled, lasered or etched on different materials in arbitrary orientation.
Abstract: This research proposes an Interactive 3D Experience to
enhance customer value in the fantasy era. As products reach maturity,
they become more similar in the range of functions that they provide.
This leads to competition via reduced retail price and ultimately
reduced profitability. A competitive design method is therefore
needed that can produce higher value products. An Enhanced Value
Experience has been identified that can assist designers to provide
quality products and to give them a unique positioning. On the basis of
this value opportunity, the method of Interactive 3D Experience has
been formulated and applied to the domain of retail furniture. Through
this, customers can create their own personalized styling via the
interactive 3D platform.
Abstract: This project relates to a two-wheeled self balancing
robot for transferring loads on different locations along a path. This
robot specifically functions as a dual mode navigation to navigate
efficiently along a desired path. First, as a plurality of distance
sensors mounted at both sides of the body for collecting information
on tilt angle of the body and second, as a plurality of speed sensors
mounted at the bottom of the body for collecting information of the
velocity of the body in relative to the ground. A microcontroller for
processing information collected from the sensors and configured to
set the path and to balance the body automatically while a processor
operatively coupled to the microcontroller and configured to compute
change of the tilt and velocity of the body. A direct current motor
operatively coupled to the microcontroller for controlling the wheels
and characterized in that a remote control is operatively coupled to
the microcontroller to operate the robot in dual navigation modes.
Abstract: In this paper, the effect of modified clay on the
mechanical efficiency of epoxy resin is examined. Studies by X ray
diffraction and microscopic transient electron method show that
modified clay distribution in polymer area is intercalated kind.
Examination the results of mechanical tests shows that existence of
modified clay in epoxy area increases pressure yield strength, tension
module and nano composite fracture toughness in relate of pure
epoxy. By microscopic examinations it is recognized too that the
action of toughness growth of this kind of nano composite is due to
crack deflection, formation of new surfaces and fracture of clay piles.
Abstract: An information procuring and processing emerging technology wireless sensor network (WSN) Consists of autonomous nodes with versatile devices underpinned by applications. Nodes are equipped with different capabilities such as sensing, computing, actuation and wireless communications etc. based on application requirements. A WSN application ranges from military implementation in the battlefield, environmental monitoring, health sector as well as emergency response of surveillance. The nodes are deployed independently to cooperatively monitor the physical and environmental conditions. The architecture of WSN differs based on the application requirements and focus on low cost, flexibility, fault tolerance capability, deployment process as well as conserve energy. In this paper we have present the characteristics, architecture design objective and architecture of WSN
Abstract: A direct search approach to determine optimal reservoir operating is proposed with ant colony optimization for continuous domains (ACOR). The model is applied to a system of single reservoir to determine the optimum releases during 42 years of monthly steps. A disadvantage of ant colony based methods and the ACOR in particular, refers to great amount of computer run time consumption. In this study a highly effective procedure for decreasing run time has been developed. The results are compared to those of a GA based model.
Abstract: This paper presents Simulated Annealing based
approach to estimate solar cell model parameters. Single diode solar
cell model is used in this study to validate the proposed approach
outcomes. The developed technique is used to estimate different
model parameters such as generated photocurrent, saturation current,
series resistance, shunt resistance, and ideality factor that govern the
current-voltage relationship of a solar cell. A practical case study is
used to test and verify the consistency of accurately estimating
various parameters of single diode solar cell model. Comparative
study among different parameter estimation techniques is presented
to show the effectiveness of the developed approach.