Abstract: Most buildings have been using anchor bolts
commonly for installing outdoor advertising structures. Anchor bolts
of common carbon steel are widely used and often installed
indiscriminately by inadequate installation standards. In the area
where strong winds frequently blow, falling accidents of outdoor
advertising structures can occur and cause a serious disaster, which is
very dangerous and to be prevented. In this regard, the development of
high-performance anchor bolts is urgently required. In the present
study, 25Cr-8Ni-1.5Si-1Mn-0.4C alloy was produced by traditional
vacuum induction melting (VIM) for the application of anchor bolt.
The alloy composition is revealed as a duplex microstructure from
thermodynamic phase analysis by FactSage® and confirmed by
metallographic experiment. Addition of Nitrogen to the alloy was
found to reduce the ferritic phase domain and significantly increase the
hardness and the tensile strength. Microstructure observation revealed
mixed structure of austenite and ferrite with fine carbide distributed
along the grain and phase boundaries.
Abstract: The present study addresses problems and solutions
related to new functional food production. Wheat (Triticum aestivum
L) bran obtained from industrial mill company “Dobeles
dzirnavieks”, was used to investigate them as raw material like
nutrients for Bifidobacterium lactis Bb-12. Enzymatic hydrolysis of
wheat bran starch was carried out by α-amylase from Bacillus
amyloliquefaciens (Sigma Aldrich). The Viscozyme L purchased
from (Sigma Aldrich) were used for reducing released sugar.
Bifidibacterium lactis Bb-12 purchased from (Probio-Tec® CHR
Hansen) was cultivated in enzymatically hydrolysed wheat bran
mash. All procedures ensured the number of active Bifidobacterium
lactis Bb-12 in the final product reached 105 CFUg-1. After enzymatic
and bacterial fermentations sample were freeze dried for analysis of
chemical compounds. All experiments were performed at Faculty of
Food Technology of Latvia University of Agriculture in January-
March 2013. The obtained results show that both types of wheat bran
(enzymatically treated and non-treated) influenced the fermentative
activity and number of Bifidibacterium lactis Bb-12 viable in wheat
bran mash. Amount of acidity strongly increase during the wheat
bran mash fermentation. The main objective of this work was to
create low-energy functional enzymatically and bacterially treated
food from wheat bran using enzymatic hydrolysis of carbohydrates
and following cultivation of Bifidobacterium lactis Bb-12.
Abstract: Factoring Boolean functions is one of the basic operations in algorithmic logic synthesis. A novel algebraic factorization heuristic for single-output combinatorial logic functions is presented in this paper and is developed based on the set theory paradigm. The impact of factoring is analyzed mainly from a low power design perspective for standard cell based digital designs in this paper. The physical implementation of a number of MCNC/IWLS combinational benchmark functions and sub-functions are compared before and after factoring, based on a simple technology mapping procedure utilizing only standard gate primitives (readily available as standard cells in a technology library) and not cells corresponding to optimized complex logic. The power results were obtained at the gate-level by means of an industry-standard power analysis tool from Synopsys, targeting a 130nm (0.13μm) UMC CMOS library, for the typical case. The wire-loads were inserted automatically and the simulations were performed with maximum input activity. The gate-level simulations demonstrate the advantage of the proposed factoring technique in comparison with other existing methods from a low power perspective, for arbitrary examples. Though the benchmarks experimentation reports mixed results, the mean savings in total power and dynamic power for the factored solution over a non-factored solution were 6.11% and 5.85% respectively. In terms of leakage power, the average savings for the factored forms was significant to the tune of 23.48%. The factored solution is expected to better its non-factored counterpart in terms of the power-delay product as it is well-known that factoring, in general, yields a delay-efficient multi-level solution.
Abstract: In this study, numerical simulations on laminar flow in
sinusoidal wavy shaped tubes were conducted for mean Reynolds
number of 250, which is in the range of physiological flow-rate and
investigated flow structures, pressure distribution and particle
trajectories both in steady and periodic inflow conditions. For
extensive comparisons, various wave lengths and amplitudes of sine
function for geometry of tube models were employed. The results
showed that small amplitude secondary curvature has significant
influence on the nature of flow patterns and particle mixing
mechanism. This implies that characterizing accurate geometry is
essential in accurate predicting of in vivo hemodynamics and may
motivate further study on any possibility of reflection of secondary
flow on vascular remodeling and pathophysiology.
Abstract: In this paper, we propose a robust disease detection
method, called adaptive orientation code matching (Adaptive OCM),
which is developed from a robust image registration algorithm:
orientation code matching (OCM), to achieve continuous and
site-specific detection of changes in plant disease. We use two-stage
framework for realizing our research purpose; in the first stage,
adaptive OCM was employed which could not only realize the
continuous and site-specific observation of disease development, but
also shows its excellent robustness for non-rigid plant object searching
in scene illumination, translation, small rotation and occlusion changes
and then in the second stage, a machine learning method of support
vector machine (SVM) based on a feature of two dimensional (2D)
xy-color histogram is further utilized for pixel-wise disease
classification and quantification. The indoor experiment results
demonstrate the feasibility and potential of our proposed algorithm,
which could be implemented in real field situation for better
observation of plant disease development.
Abstract: In this work, simulation algorithms for contact drying
of agitated particulate materials under vacuum and at atmospheric
pressure were developed. The implementation of algorithms gives a
predictive estimation of drying rate curves and bulk bed temperature
during contact drying. The calculations are based on the penetration
model to describe the drying process, where all process parameters
such as heat and mass transfer coefficients, effective bed properties,
gas and liquid phase properties are estimated with proper
correlations. Simulation results were compared with experimental
data from the literature. In both cases, simulation results were in good
agreement with experimental data. Few deviations were identified
and the limitations of the predictive capabilities of the models are
discussed. The programs give a good insight of the drying behaviour
of the analysed powders.
Abstract: This paper discusses the utilization of marine biomass as an energy resource in Japan. A marine biomass energy system in Japan was proposed consisting of seaweed cultivation (Laminaria japonica) at offshore marine farms, biogas production via methane fermentation of the seaweeds, and fuel cell power generation driven by the generated biogas. We estimated energy output, energy supply potential, and CO2 mitigation in Japan on the basis of the proposed system. As a result, annual energy production was estimated to be 1.02-109 kWh/yr at nine available sites. Total CO2 mitigation was estimated to be 1.04-106 tonnes per annum at the nine sites. However, the CO2 emission for the construction of relevant facilities is not taken into account in this paper. The estimated CO2 mitigation is equivalent to about 0.9% of the required CO2 mitigation for Japan per annum under the Kyoto Protocol framework.
Abstract: In recent methodological articles related to structural equation modeling (SEM), the question of how to measure endogenous formative variables has been raised as an urgent, unresolved issue. This research presents an empirical application from the CRM system development context to test a recently developed technique, which makes it possible to measure endogenous formative constructs in structural models. PLS path modeling is used to demonstrate the feasibility of measuring antecedent relationships at the formative indicator level, not the formative construct level. Empirical results show that this technique is a promising approach to measure antecedent relationships of formative constructs in SEM.
Abstract: In this paper, center conditions and bifurcation of limit cycles at the nilpotent critical point in a class of quintic polynomial differential system are investigated.With the help of computer algebra system MATHEMATICA, the first 10 quasi Lyapunov constants are deduced. As a result, sufficient and necessary conditions in order to have a center are obtained. The fact that there exist 10 small amplitude limit cycles created from the three order nilpotent critical point is also proved. Henceforth we give a lower bound of cyclicity of three-order nilpotent critical point for quintic Lyapunov systems. At last, we give an system which could bifurcate 10 limit circles.
Abstract: In this paper, naturally immobilized lipase, Carica
papaya lipase, catalyzed biodiesel production from fish oil was
studied. The refined fish oil, extracted from the discarded parts of
fish, was used as a starting material for biodiesel production. The
effects of molar ratio of oil: methanol, lipase dosage, initial water
activity of lipase, temperature and solvent were investigated. It was
found that Carica papaya lipase was suitable for methanolysis of fish
oil to produce methyl ester. The maximum yield of methyl ester
could reach up to 83% with the optimal reaction conditions: oil:
methanol molar ratio of 1: 4, 20% (based on oil) of lipase, initial
water activity of lipase at 0.23 and 20% (based on oil) of tert-butanol
at 40oC after 18 h of reaction time. There was negligible loss in
lipase activity even after repeated use for 30 cycles.
Abstract: Motion detection is very important in image
processing. One way of detecting motion is using optical flow.
Optical flow cannot be computed locally, since only one independent
measurement is available from the image sequence at a point, while
the flow velocity has two components. A second constraint is needed.
The method used for finding the optical flow in this project is
assuming that the apparent velocity of the brightness pattern varies
smoothly almost everywhere in the image. This technique is later
used in developing software for motion detection which has the
capability to carry out four types of motion detection. The motion
detection software presented in this project also can highlight motion
region, count motion level as well as counting object numbers. Many
objects such as vehicles and human from video streams can be
recognized by applying optical flow technique.
Abstract: According to the Auckland climate, building passive
design more focus on improving winter indoor thermal and health
conditions. Based on field study data of indoor air temperature and
relative humidity close to ceiling and floor of an insulated Auckland
townhouse with and without a whole home mechanical ventilation
system, this study is to analysis variation of indoor microclimate data
of an Auckland townhouse using or not using the mechanical
ventilation system to evaluate winter indoor thermal and health
conditions for the future house design with a mechanical ventilation
system.
Abstract: The use and management of projects has risen to
a new prominence, with projects seen as critical to economic in
both the private and public sectors due challenging and dynamic
business environment. However, failure in managing project is
encountered regularly, which cause the waste of company
resources. The impacts of projects that failed to meet
stakeholders expectations have left behind long lasting negative
consequences in organization. Therefore, this research aims to
investigate on key success factors of project management in an
organization. It is believed that recognizing important factors
that contribute to successful project will help companies to
increase the overall profitability. 150 questionnaires were
distributed to respondents and 110 questionnaires were collected
and used in performing the data analysis. The result has strongly
supported the relationship between independent variables and
project performance.
Abstract: RFID tag is a small and inexpensive microchip which is
capable of transmitting unique identifier through wireless network in a
short distance. If a group of RFID tags can be scanned simultaneously
by one reader, RFID Group proof could be generated. Group proof can
be used in various applications, such as good management which is
usually achieved using barcode system. A lot of RFID group proof
schemes have been proposed by many researchers. In this paper, we
introduce some existing group proof schemes and then analyze their
vulnerabilities to the privacy. Moreover, we propose a new attack
model, which threats the privacy of user by tracking tags in a group.
Abstract: With the rapid usage of portable devices mobility in
IP networks becomes more important issue in the recent years. IETF
standardized Mobile IP that works in Network Layer, which involves
tunneling of IP packets from HA to Foreign Agent. Mobile IP suffers
many problems of Triangular Routing, conflict with private
addressing scheme, increase in load in HA, need of permanent home
IP address, tunneling itself, and so on. In this paper, we proposed
mobility management in Application Layer protocol SIP and show
some comparative analysis between Mobile IP and SIP in context of
mobility.
Abstract: This paper will first describe predictor controllers
when the proportional-integral-derivative (PID) controllers are
inactive for procedures that have large delay time (LDT) in transfer
stage. Therefore in those states, the predictor controllers are better
than the PID controllers, then compares three types of predictor
controllers. The value of these controller-s parameters are obtained
by trial and error method, so here an effort has been made to obtain
these parameters by Ziegler-Nichols method. Eventually in this paper
Ziegler-Nichols method has been described and finally, a PIP
controller has been designed for a thermal system, which circulates
hot air to keep the temperature of a chamber constant.
Abstract: The two-dimensional gel electrophoresis method
(2-DE) is widely used in Proteomics to separate thousands of proteins
in a sample. By comparing the protein expression levels of proteins in
a normal sample with those in a diseased one, it is possible to identify
a meaningful set of marker proteins for the targeted disease. The major
shortcomings of this approach involve inherent noises and irregular
geometric distortions of spots observed in 2-DE images. Various
experimental conditions can be the major causes of these problems. In
the protein analysis of samples, these problems eventually lead to
incorrect conclusions. In order to minimize the influence of these
problems, this paper proposes a partition based pair extension method
that performs spot-matching on a set of gel images multiple times and
segregates more reliable mapping results which can improve the
accuracy of gel image analysis. The improved accuracy of the
proposed method is analyzed through various experiments on real
2-DE images of human liver tissues.
Abstract: Vector quantization is a powerful tool for speech
coding applications. This paper deals with LPC Coding of speech
signals which uses a new technique called Multi Switched Split
Vector Quantization, This is a hybrid of two product code vector
quantization techniques namely the Multi stage vector quantization
technique, and Switched split vector quantization technique,. Multi
Switched Split Vector Quantization technique quantizes the linear
predictive coefficients in terms of line spectral frequencies. From
results it is proved that Multi Switched Split Vector Quantization
provides better trade off between bitrate and spectral distortion
performance, computational complexity and memory requirements
when compared to Switched Split Vector Quantization, Multi stage
vector quantization, and Split Vector Quantization techniques. By
employing the switching technique at each stage of the vector
quantizer the spectral distortion, computational complexity and
memory requirements were greatly reduced. Spectral distortion was
measured in dB, Computational complexity was measured in
floating point operations (flops), and memory requirements was
measured in (floats).
Abstract: The aim of this study is to examine the reading
comprehension scores of Turkish 5th grade students according to the
variables given in the student questionnaire. In this descriptive
survey study research participated 279 5th grade students, who
studied at 10 different primary schools in four provinces of Ankara in
2008-2009 academic year. Two different data collection tools were
made use of in the study: “Reading Comprehension Test" and
“Student Information Questionnaire". Independent sample t-test, oneway
Anova and two-way Anova tests were used in the analyses of
the gathered data. The results of the study indicate that the reading
comprehension scores of the students differ significantly according to
sex of the students, the number of books in their houses, the
frequency of summarizing activities on the reading text of free and
the frequency reading hours provided by their teachers; but, differ
not significantly according to educational level of their mothers and
fathers.
Abstract: This paper is a part of research, in which the way the
biomedical engineers follow in their work is analyzed. The goal of
this paper is to present a method for specification of user
requirements in the medical devices maintenance process. Data
Gathering Methods, Research Model Phases and Descriptive
Analysis is presented. These technology and verification rules can be
implemented in Medical devices maintenance management process to
the maintenance process.