Abstract: A company CSR commitment, as stated in its Social
Report is, actually, perceived by its stakeholders?And in what
measure? Moreover, are stakeholders satisfied with the company
CSR efforts? Indeed, business returns from Corporate Social
Responsibility (CSR) practices, such as company reputation and
customer loyalty, depend heavily on how stakeholders perceive the
company social conduct. In this paper, we propose a methodology to
assess a company CSR commitment based on Global Reporting
Initiative (GRI) indicators, Content Analysis and a CSR positioning
matrix. We evaluate three aspects of CSR: the company commitment
disclosed through its Social Report; the company commitment
perceived by its stakeholders; the CSR commitment that stakeholders
require to the company. The positioning of the company under study
in the CSR matrix is based on the comparison among the three
commitment aspects (disclosed, perceived, required) and it allows
assessment and development of CSR strategies.
Abstract: Reinforced concrete crash barriers used in road traffic
must meet a number of criteria. Crash barriers are laid lengthwise,
one behind another, and joined using specially designed steel locks.
While developing BSV reinforced concrete crash barriers (type
ŽPSV), experiments and calculations aimed to optimize the shape of
a newly designed lock and the reinforcement quantity and
distribution in a crash barrier were carried out. The tension carrying
capacity of two parallelly joined locks was solved experimentally.
Based on the performed experiments, adjustments of nonlinear
properties of steel were performed in the calculations. The obtained
results served as a basis to optimize the lock design using a
computational model that takes into account the plastic behaviour of
steel and the influence of the surrounding concrete [6]. The response
to the vehicle impact has been analyzed using a specially elaborated
complex computational model, comprising both the nonlinear model
of the damping wall or crash barrier and the detailed model of the
vehicle [7].
Abstract: The objective of this paper is twofold: (1) discuss and
analyze the successful case studies worldwide, and (2) identify the
similarities and differences of case studies worldwide. Design
methodology/approach: The nature of this research is mainly method
qualitative (multi-case studies, literature review). This investigation
uses ten case studies, and the data was mainly collected and
organizational documents from the international countries. Finding:
The finding of this research can help incubator manager, policy
maker and government parties for successful implementation.
Originality/value: This paper contributes to the current literate review
on the best practices worldwide. Additionally, it presents future
perspective for academicians and practitioners.
Abstract: Recently, malware attacks have become more serious
over the Internet by e-mail, denial of service (DoS) or distributed
denial of service (DDoS). The Botnets have become a significant part
of the Internet malware attacks. The traditional botnets include three
parts – botmaster, command and control (C&C) servers and bots. The
C&C servers receive commands from botmaster and control the
distributions of computers remotely. Bots use DNS to find the
positions of C&C server. In this paper, we propose an advanced hybrid
peer-to-peer (P2P) botnet 2.0 (AHP2P botnet 2.0) using web 2.0
technology to hide the instructions from botmaster into social sites,
which are regarded as C&C servers. Servent bots are regarded as
sub-C&C servers to get the instructions from social sites. The AHP2P
botnet 2.0 can evaluate the performance of servent bots, reduce DNS
traffics from bots to C&C servers, and achieve harder detection bots
actions than IRC-based botnets over the Internet.
Abstract: In this paper, we study the application of Extreme
Learning Machine (ELM) algorithm for single layered feedforward
neural networks to non-linear chaotic time series problems. In this
algorithm the input weights and the hidden layer bias are randomly
chosen. The ELM formulation leads to solving a system of linear
equations in terms of the unknown weights connecting the hidden
layer to the output layer. The solution of this general system of
linear equations will be obtained using Moore-Penrose generalized
pseudo inverse. For the study of the application of the method we
consider the time series generated by the Mackey Glass delay
differential equation with different time delays, Santa Fe A and
UCR heart beat rate ECG time series. For the choice of sigmoid,
sin and hardlim activation functions the optimal values for the
memory order and the number of hidden neurons which give the
best prediction performance in terms of root mean square error are
determined. It is observed that the results obtained are in close
agreement with the exact solution of the problems considered
which clearly shows that ELM is a very promising alternative
method for time series prediction.
Abstract: Bioinformatics and Cheminformatics use computer as disciplines providing tools for acquisition, storage, processing, analysis, integrate data and for the development of potential applications of biological and chemical data. A chemical database is one of the databases that exclusively designed to store chemical information. NMRShiftDB is one of the main databases that used to represent the chemical structures in 2D or 3D structures. SMILES format is one of many ways to write a chemical structure in a linear format. In this study we extracted Antimicrobial Structures in SMILES format from NMRShiftDB and stored it in our Local Data Warehouse with its corresponding information. Additionally, we developed a searching tool that would response to user-s query using the JME Editor tool that allows user to draw or edit molecules and converts the drawn structure into SMILES format. We applied Quick Search algorithm to search for Antimicrobial Structures in our Local Data Ware House.
Abstract: The present study attempted to improve the Mercury
(Hg) sorption capacity of kanuma volcanic ash soil (KVAS) by
impregnating the cupper (Cu). Impregnation was executed by 1 and
5% Cu powder and sorption characterization of optimum Hg
removing Cu impregnated KVAS was performed under different
operational conditions, contact time, solution pH, sorbent dosage and
Hg concentration using the batch operation studies. The 1% Cu
impregnated KVAS pronounced optimum improvement (79%) in
removing Hg from water compare to control. The present
investigation determined the equilibrium state of maximum Hg
adsorption at 6 h contact period. The adsorption revealed a pH
dependent response and pH 3.5 showed maximum sorption capacity
of Hg. Freundlich isotherm model is well fitted with the experimental
data than that of Langmuir isotherm. It can be concluded that the Cu
impregnation improves the Hg sorption capacity of KVAS and 1%
Cu impregnated KVAS could be employed as cost-effective
adsorbent media for treating Hg contaminated water.
Abstract: Yogurt is a coagulated milk product obtained from
the lactic acid fermentation by the action of Lactobacillus
bulgaricus and Streptococcus thermophilus. The additions of fruits
into milk may enhance the taste and the therapeutical values of milk
products. However fruits also may change the fermentation
behaviour. In this present study, the changes in physicochemical, the
peptide concentration, total phenolics content and the antioxidant
potential of yogurt upon the addition of Hylocereus polyrhizus and
Hylocereus undatus (white and red dragon fruit) were investigated.
Fruits enriched yogurt (10%, 20%, 30% w/w) were prepared and the
pH, TTA, syneresis measurement, peptide concentration, total
phenolics content and DPPH antioxidant inhibition percentage were
determined. Milk fermentation rate was enhanced in red dragon fruit
yogurt for all doses (-0.3606 - -0.4126 pH/h) while only white
dragon fruit yogurt with 20% and 30% (w/w) composition showed
increment in fermentation rate (-0.3471 - -0.3609 pH/h) compared to
plain yogurt (-0.3369pH/h). All dragon fruit enriched yogurts
generally showed lower pH readings (pH 3.95 - 4.03) compared to
plain yogurt (pH 4.05). Both fruit yogurts showed a higher lactic
acid percentage (1.14-1.23%) compared to plain yogurt (1.08%).
Significantly higher syneresis percentage (57.19 - 70.32%)
compared to plain yogurt (52.93%) were seen in all fruit enriched
yogurts. The antioxidant activity of plain yogurt (19.16%) was
enhanced by the presence of white and red dragon fruit (24.97-
45.74%). All fruit enriched yogurt showed an increment in total
phenolic content (36.44 - 64.43mg/ml) compared to plain yogurt
(20.25mg/ml). However, the addition of white and red dragon fruit
did not enhance the proteolysis of milk during fermentation.
Therefore, it could be concluded that the addition of white and red
dragon fruit into yogurt enhanced the milk fermentation rate, lactic
acid content, syneresis percentage, antioxidant activity, and total
phenolics content in yogurt.
Abstract: Organochlorine pesticides (OCPs) are known to be
persistent and bioaccumulative toxicants that may cause reproductive
impairments in wildlife as well as human. The current study uses the
snail-eating turtle Malayemys macrocephala, a long-lived animal
commonly distribute in rice field habitat in central part of Thailand,
as a sentinel to monitor OCP contamination in environment. The
nest soil, complete clutch of eggs, and blood of the turtle were
collected from agricultural areas in the Chao Phraya River Basin,
Thailand during the nesting season of 2007-2008. The novel
methods for tissue extraction by an accelerated solvent extractor
(ASE, for egg) and liquid-liquid extraction (for blood) have been
developed. The nineteen OCP residues were analyzed by gas
chromatography with micro-electron captured detector (GC-μECD).
The validated methods have met requirements of the AOAC
standard. The results indicated that significant amounts of OCPs are
still contaminated in nest soil and eggs of the turtle even though the
OCPs had been banned in this area for many years. This suggested
the potential risk to health of wildlife as well as human in the area.
Abstract: This paper presents a controller design technique for
Synchronous Reluctance Motor to improve its dynamic performance
with fast response and high accuracy. The sliding mode control is the
most attractive and suitable method to use for this purpose, since it is
simple in design and for its insensitivity to parameter variations or
external disturbances. When this method implemented it yields fast
dynamic response without overshoot and a zero steady-state error.
The current loop control with decentralized sliding mode is presented
in this paper. The mathematical model for the synchronous machine,
the inverter and the controller is developed. The stability of the
sliding mode controller is analyzed. Simulation of synchronous
reluctance motor and the controller with PWM-inverter has been
curried out, using the SIMULINK software package of MATLAB.
Simulation results are presented to show the effectiveness of the
approach.
Abstract: In this paper we discuss a set of guidelines which
could be adapted when designing an audio user interface for the
visually impaired. It is based on an audio environment that is
focused on audio positioning. Unlike current applications which only
interpret Graphical User Interface (GUI) for the visually impaired,
this particular audio environment bypasses GUI to provide a direct
auditory output. It presents the capability of two dimensional (2D)
navigation on audio interfaces. This paper highlights the significance
of a 2D audio environment with spatial information in the context
of the visually impaired. A thorough usability study has been conducted
to prove the applicability of proposed design guidelines for
these auditory interfaces. While proving these guidelines, previously
unearthed design aspects have been revealed in this study.
Abstract: This paper deals with the problem of thermal and
mechanical shocks, which rising during operation, mostly at
interrupted cut. Here will be solved their impact on the cutting edge
tool life, the impact of coating technology on resistance to shocks
and experimental determination of tool life in heating flame.
Resistance of removable cutting edges against thermal and
mechanical shock is an important indicator of quality as well as its
abrasion resistance. Breach of the edge or its crumble may occur due
to cyclic loading. We can observe it not only during the interrupted
cutting (milling, turning areas abandoned hole or slot), but also in
continuous cutting. This is due to the volatility of cutting force on
cutting. Frequency of the volatility in this case depends on the type
of rising chips (chip size element). For difficult-to-machine materials
such as austenitic steel particularly happened at higher cutting speeds
for the localization of plastic deformation in the shear plane and for
the inception of separate elements substantially continuous chips.
This leads to variations of cutting forces substantially greater than for
other types of steel.
Abstract: Offset Double-Disk Opener (DDO) is a popular
furrow opener in conservation tillage. It has some limitations such as
negative suction to penetrate in the soil, hair pinning and mixing seed
and fertilizer in the slot. Because of importance of separation of seed
and fertilizer in the slot, by adding two horizontal mini disks to DDO
a modified opener was made (MDO) which placed the fertilizer
between and under two rows of seed. To consider performance of
novel opener an indoor comparison test between DDO and MDO was
performed at soil bin. The experiment was conducted with three
working speeds (3, 6 and 8 km h-1), two bulk densities of soil (1.1
and 1.4 Mg m-3) and two levels of residues (1 and 2 ton ha-1). The
experimental design consisted in a (3×2×2) complete randomized
factorial with three replicates for each test. Moisture of seed furrow,
separation of seed and fertilizer, hair pinning and resultant forces
acting on the openers were used as assessing indexes. There was no
significant difference between soil moisture content in slots created
by DDO and MDO at 0-4 cm depth, but at 4-8 cm the in the slot
created by MDO moisture content was higher about 9%. Horizontal
force for both openers increased with increasing speed and soil bulk
density. Vertical force for DDO was negative so it needed additional
weight for penetrating in the soil, but vertical force for MDO was
positive and, which can solve the challenge of penetration in the soil
in DDO. In soft soil with heavy residues some trash was pushed by
DDO into seed furrow (hair pinning) but at MDO seed were placed at
clean groove. Lateral and vertical separation of seed and fertilizer
was performed effectively by MDO (4.5 and 5 cm, respectively)
while DDO put seed and fertilizer close to each other. Overall, the
Modified Offset Double-disks (MDO) had better performance. So by
adapting this opener with no-tillage drillers it would possible to have
higher yield in conservation tillage where the most appropriate
opener is disk type.
Abstract: The fractal-shaped orifices are assumed to have a
significant effect on the pressure drop downstream pipe flow due to
their edge self-similarity shape which enhances the mixing
properties. Here, we investigate the pressure drop after these fractals
using a digital micro-manometer at different stations downstream a
turbulent flow pipe then a direct comparison has been made with the
pressure drop measured from regular orifices with the same flow
area. Our results showed that the fractal-shaped orifices have a
significant effect on the pressure drop downstream the flow. Also
the pressure drop measured across the fractal-shaped orifices is
noticed to be lower that that from ordinary orifices of the same flow
areas. This result could be important in designing piping systems
from point of view of losses consideration with the same flow
control area. This is promising to use the fractal-shaped orifices as
flowmeters as they can sense the pressure drop across them
accurately with minimum losses than the regular ones.
Abstract: Domain-specific languages describe specific solutions to problems in the application domain. Traditionally they form a solution composing black-box abstractions together. This, usually, involves non-deep transformations over the target model. In this paper we argue that it is potentially powerful to operate with grey-box abstractions to build a domain-specific software system. We present parametric code templates as grey-box abstractions and conceptual tools to encapsulate and manipulate these templates. Manipulations introduce template-s merging routines and can be defined in a generic way. This involves reasoning mechanisms at the code templates level. We introduce the concept of Neurath Modelling Language (NML) that operates with parametric code templates and specifies a visualisation mapping mechanism for target models. Finally we provide an example of calculating a domain-specific software system with predefined NML elements.
Abstract: The proper design of RF pulses in magnetic resonance imaging (MRI) has a direct impact on the quality of acquired images, and is needed for many applications. Several techniques have been proposed to obtain the RF pulse envelope given the desired slice profile. Unfortunately, these techniques do not take into account the limitations of practical implementation such as limited amplitude resolution. Moreover, implementing constraints for special RF pulses on most techniques is not possible. In this work, we propose to develop an approach for designing optimal RF pulses under theoretically any constraints. The new technique will pose the RF pulse design problem as a combinatorial optimization problem and uses efficient techniques from this area such as genetic algorithms (GA) to solve this problem. In particular, an objective function will be proposed as the norm of the difference between the desired profile and the one obtained from solving the Bloch equations for the current RF pulse design values. The proposed approach will be verified using analytical solution based RF simulations and compared to previous methods such as Shinnar-Le Roux (SLR) method, and analysis, selected, and tested the options and parameters that control the Genetic Algorithm (GA) can significantly affect its performance to get the best improved results and compared to previous works in this field. The results show a significant improvement over conventional design techniques, select the best options and parameters for GA to get most improvement over the previous works, and suggest the practicality of using of the new technique for most important applications as slice selection for large flip angles, in the area of unconventional spatial encoding, and another clinical use.
Abstract: The rotation of starting pitchers is a strategic issue
which has a significant impact on the performance of a professional
team. Choosing an optimal starting pitcher from among many
alternatives is a multi-criteria decision-making (MCDM) problem. In
this study, a model using the Analytic Hierarchy Process (AHP) and
Technique for Order Performance by Similarity to the Ideal Solution
(TOPSIS) is proposed with which to arrange the starting pitcher
rotation for teams of the Chinese Professional Baseball League. The
AHP is used to analyze the structure of the starting pitcher selection
problem and to determine the weights of the criteria, while the
TOPSIS method is used to make the final ranking. An empirical
analysis is conducted to illustrate the utilization of the model for the
starting pitcher rotation problem. The results demonstrate the
effectiveness and feasibility of the proposed model.
Abstract: The current trend of increasing quality and demands
of the final product is affected by time analysis of the entire
manufacturing process. The primary requirement of manufacturing is
to produce as many products as soon as possible, at the lowest
possible cost, but of course with the highest quality. Such
requirements may be satisfied only if all the elements entering and
affecting the production cycle are in a fully functional condition.
These elements consist of sensory equipment and intelligent control
elements that are essential for building intelligent manufacturing
systems. The intelligent manufacturing paradigm includes a new
approach to production system structure design. Intelligent behaviors
are based on the monitoring of important parameters of system and
its environment. The flexible reaction to changes. The realization and
utilization of this design paradigm as an "intelligent manufacturing
system" enables the flexible system reaction to production
requirement as soon as environmental changes too. Results of these
flexible reactions are a smaller layout space, be decreasing of
production and investment costs and be increasing of productivity.
Intelligent manufacturing system itself should be a system that can
flexibly respond to changes in entering and exiting the process in
interaction with the surroundings.
Abstract: This study was aimed for investigating of
manufacturing high aluminum content Mg alloys using a horizontal
twin roll caster. Recently, weight saving has been key issues for lighter
transport equipments as well as electronic component parts. As
alternative materials to aluminum alloys, developing magnesium alloy
with higher strength has been expected. Normally high Aluminum
content Mg alloy has poor ductility and is difficult to be rolled because
of its high strength. However, twin roll casting process is suitable for
manufacturing wrought Mg alloys because materials can be cast
directly from molten metal. In this study, manufacturing of high
aluminum content magnesium alloy sheet using the roll casting
process has been carried out. Effects of manufacturing parameter, such
as roll velocity, pouring temperature and roll gap, on casting was
investigated. A microscopic observation of the crystals of cross section
of as cast strip as well as rolled strip was conducted.
Abstract: The aim of this paper is to present current and future
procedures in castings procurement. Differences in procurement are
highlighted. The supplier selection criteria used in practice is
compared to literature findings. Different trends related to supply
chains are presented and it is described how they are reflected in
reality to castings procurement. To fulfil the aim, interviews were
conducted in nine companies using castings. It was found that largest
casting users have the most subcontractor foundries and it is more
typical that they have multiple suppliers for the same parts. Currently
only two companies out of nine purchase castings outside Europe,
but the others are also progressing in the same direction. The main
reason is the need to lower purchasing costs. Another trend is that all
companies want to buy cast components or sub-assemblies instead of
raw castings from foundries. It was found that price is a main
supplier selection criterion. All companies use competitive bidding in
supplier selection.