Abstract: This paper presents a new circuit arrangement for a
current-mode Wheatstone bridge that is suitable for low-voltage
integrated circuits implementation. Compared to the other proposed
circuits, this circuit features severe reduction of the elements number,
low supply voltage (1V) and low power consumption (
Abstract: As wind, solar and other clean and green energy
sources gain popularity worldwide, engineers are seeking ways to
make renewable energy systems more affordable and to integrate
them with existing ac power grids. In the present paper an attempt
has been made for integrating the PV arrays to the smart nano grid
using an artificial intelligent (AI) based solar powered cascade multilevel
inverter. The AI based controller switching scheme has been
used for improving the power quality by reducing the Total Harmonic
Distortion (THD) of the multi-level inverter output voltage.
Abstract: This paper investigates the effectiveness of the use of
seismic isolation devices on the overall 3D seismic response of
curved highway viaducts with an emphasis on expansion joints.
Furthermore, an evaluation of the effectiveness of the use of cable
restrainers is presented. For this purpose, the bridge seismic
performance has been evaluated on four different radii of curvature,
considering two cases: restrained and unrestrained curved viaducts.
Depending on the radius of curvature, three-dimensional non-linear
dynamic analysis shows the vulnerability of curved viaducts to
pounding and deck unseating damage. In this study, the efficiency of
using LRB supports combined with cable restrainers on curved
viaducts is demonstrated, not only by reducing in all cases the
possible damage, but also by providing a similar behavior in the
viaducts despite of curvature radius.
Abstract: Experiments with pumpkin-rowanberry marmalade
candies were carried out at the Faculty of Food Technology of the
Latvia University of Agriculture. The objective of this investigation
was to evaluate the quality changes of pumpkin-rowanberry
marmalade candies packed in different packaging materials during
the storage of 15 weeks, and to find the most suitable packaging
material for prolongation of low sugar marmalade candies shelf-life.
An active packaging in combination with modified atmosphere
(MAP, CO2 100%) was examined and compared with traditional
packaging in air ambiance. Polymer Multibarrier 60 and paper bags
were used. Influence of iron based oxygen absorber in sachets of 500
cc obtained from Mitsubishi Gas Chemical Europe Ageless® on the
marmalade candies’ quality was tested during shelf life. Samples of
80±5 g were packaged in polymer pouches (110 mm x 110 mm),
hermetically sealed by MULTIVAC C300 vacuum chamber machine,
and stored in a room temperature +21±0.5 °C. The physiochemical
properties –moisture content, hardness, aw, pH, changes of
atmosphere content (CO2 and O2), ascorbic acid, total carotenoids,
total phenols in headspace of packs, and microbial conditions were
analysed before packaging and in the 1st, 3rd , 5th, 8th, 11th and 15th
weeks of storage.
Abstract: We proposes a way of removing noises and reducing the number of colors contained in a JPEG image. Main purpose of this project is to convert color images to monochrome images for the color blinds. We treat the crispy color images like the Tokyo subway map. Each color in the image has an important information. But for the color blinds, similar colors cannot be distinguished. If we can convert those colors to different gray values, they can distinguish them.
Abstract: The experiment was performed to evaluate the effect
of GA3, 2,4-D on fruit growth and fruit quality of wax apple. The
experiment consisted of Red A, Monulla, Atu, Red B cultivars. GA3
and 2,4-D were applied at the small bud and petal fall stage.
Physiological, biochemical characters of fruit were recoded. The
result showed application of GA3, 2,4-D greatly response in
increasing fruit set for all treatment as compared to control. Fruit
weight, fruit size were increased at 10 ppm 2,4-D in ‘Red A’, ‘Red
B’, however it was also enhancing at 10 ppm GA3 in ‘Monulla’,
‘Atu’. For ‘Monulla’, ‘Atu’ fruit crack reduced by 10 ppm 2,4-D
application, but ‘Red B’, ‘Red A’ gave least fruit crack at 10 and 30
ppm GA3, respectively. ‘Monulla’, ‘Atu’ and ‘Red B’ resulted in
response well to 10 ppm GA3 on improving TSS, whereas
application of 30 ppm GA3 greatly enhancing TSS in ‘Red A’. For
‘Atu’ titratable acidity markedly reduced by 10 ppm GA3
application, but spraying with 30 ppm GA3 greatly response in
reducing titratable acidity in ‘Red A’, ‘Red B’ and ‘Monulla’. It was
concluded that GA3, 2,4-D can be an effective tool to enhancing fruit
set, fruit growth as well as improving fruit quality of wax apple.
Abstract: Finger spelling is an art of communicating by signs
made with fingers, and has been introduced into sign language to serve
as a bridge between the sign language and the verbal language.
Previous approaches to finger spelling recognition are classified into
two categories: glove-based and vision-based approaches. The
glove-based approach is simpler and more accurate recognizing work
of hand posture than vision-based, yet the interfaces require the user to
wear a cumbersome and carry a load of cables that connected the
device to a computer. In contrast, the vision-based approaches provide
an attractive alternative to the cumbersome interface, and promise
more natural and unobtrusive human-computer interaction. The
vision-based approaches generally consist of two steps: hand
extraction and recognition, and two steps are processed independently.
This paper proposes real-time vision-based Korean finger spelling
recognition system by integrating hand extraction into recognition.
First, we tentatively detect a hand region using CAMShift algorithm.
Then fill factor and aspect ratio estimated by width and height
estimated by CAMShift are used to choose candidate from database,
which can reduce the number of matching in recognition step. To
recognize the finger spelling, we use DTW(dynamic time warping)
based on modified chain codes, to be robust to scale and orientation
variations. In this procedure, since accurate hand regions, without
holes and noises, should be extracted to improve the precision, we use
graph cuts algorithm that globally minimize the energy function
elegantly expressed by Markov random fields (MRFs). In the
experiments, the computational times are less than 130ms, and the
times are not related to the number of templates of finger spellings in
database, as candidate templates are selected in extraction step.
Abstract: This study was set to determine the antimicrobial
activities of brine salting, chlorinated solution, and oil frying
treatments on enteric bacteria and fungi in Rastrineobola argentea
fish from fish landing beaches within L. Victoria basin of western
Kenya. Statistical differences in effectiveness of the different
treatment methods was determined by single factor ANOVA, and
paired two-tail t-Test was performed to compare the differences in
moisture contents before and after storage. Oil fried fish recorded the
lowest microbial loads, sodium chloride at 10% concentration was
the second most effective and chlorinated solution even at 150ppm
was the least effective against the bacteria and fungi in fish. Moisture
contents of the control and treated fish were significantly lower after
storage. These results show that oil frying of fish should be adopted
for processing and preserving Rastrineobola argentea which is the
most abundant and affordable fish species from Lake Victoria.
Abstract: This paper aims at a new challenge of customer
satisfaction on mobile customer relationship management. In this
paper presents a conceptualization of mCRM on its unique
characteristics of customer satisfaction. Also, this paper develops an
empirical framework in conception of customer satisfaction in
mCRM. A single-case study is applied as the methodology. In order to
gain an overall view of the empirical case, this paper accesses to
invisible and important information of company in this investigation.
Interview is the key data source form the main informants of the
company through which the issues are identified and the proposed
framework is built. It supports the development of customer
satisfaction in mCRM; links this theoretical framework into practice;
and provides the direction for future research. Therefore, this paper is
very useful for the industries as it helps them to understand how
customer satisfaction changes the mCRM structure and increase the
business competitive advantage. Finally, this paper provides a
contribution in practice by linking a theoretical framework in
conception of customer satisfaction in mCRM for companies to a
practical real case.
Abstract: This article investigates a contribution of synthesized visual speech. Synthesis of visual speech expressed by a computer consists in an animation in particular movements of lips. Visual speech is also necessary part of the non-manual component of a sign language. Appropriate methodology is proposed to determine the quality and the accuracy of synthesized visual speech. Proposed methodology is inspected on Czech speech. Hence, this article presents a procedure of recording of speech data in order to set a synthesis system as well as to evaluate synthesized speech. Furthermore, one option of the evaluation process is elaborated in the form of a perceptual test. This test procedure is verified on the measured data with two settings of the synthesis system. The results of the perceptual test are presented as a statistically significant increase of intelligibility evoked by real and synthesized visual speech. Now, the aim is to show one part of evaluation process which leads to more comprehensive evaluation of the sign speech synthesis system.
Abstract: Accounts of language acquisition differ significantly in their treatment of the role of prediction in language learning. In particular, nativist accounts posit that probabilistic learning about words and word sequences has little to do with how children come to use language. The accuracy of this claim was examined by testing whether distributional probabilities and frequency contributed to how well 3-4 year olds repeat simple word chunks. Corresponding chunks were the same length, expressed similar content, and were all grammatically acceptable, yet the results of the study showed marked differences in performance when overall distributional frequency varied. It was found that a distributional model of language predicted the empirical findings better than a number of other models, replicating earlier findings and showing that children attend to distributional probabilities in an adult corpus. This suggested that language is more prediction-and-error based, rather than on abstract rules which nativist camps suggest.
Abstract: Among all geo-hydrological relationships, rainfallrunoff
relationship is of utmost importance in any hydrological
investigation and water resource planning. Spatial variation, lag time
involved in obtaining areal estimates for the basin as a whole can
affect the parameterization in design stage as well as in planning
stage. In conventional hydrological processing of data, spatial aspect
is either ignored or interpolated at sub-basin level. Temporal
variation when analysed for different stages can provide clues for its
spatial effectiveness. The interplay of space-time variation at pixel
level can provide better understanding of basin parameters.
Sustenance of design structures for different return periods and their
spatial auto-correlations should be studied at different geographical
scales for better management and planning of water resources.
In order to understand the relative effect of spatio-temporal
variation in hydrological data network, a detailed geo-hydrological
analysis of Betwa river catchment falling in Lower Yamuna Basin is
presented in this paper. Moreover, the exact estimates about the
availability of water in the Betwa river catchment, especially in the
wake of recent Betwa-Ken linkage project, need thorough scientific
investigation for better planning. Therefore, an attempt in this
direction is made here to analyse the existing hydrological and
meteorological data with the help of SPSS, GIS and MS-EXCEL
software. A comparison of spatial and temporal correlations at subcatchment
level in case of upper Betwa reaches has been made to
demonstrate the representativeness of rain gauges. First, flows at
different locations are used to derive correlation and regression
coefficients. Then, long-term normal water yield estimates based on
pixel-wise regression coefficients of rainfall-runoff relationship have
been mapped. The areal values obtained from these maps can
definitely improve upon estimates based on point-based
extrapolations or areal interpolations.
Abstract: The biological activity of A. pullulans isolates against
species of the genus Fusarium, bacteria of the genus Azotobacter and
pseudomonads colonizing wheat kernels was evaluated. A field
experiment was carried out in 2009-2011, in north-eastern Poland.
Winter wheat (cv. Bogatka) plants were sprayed with a cell
suspension of A. pullulans at a density of 106 - 108 per cm3 water at
the stem elongation stage and the heading stage. Untreated plants
served as control. The abundance of epiphytic yeasts, bacteria of the
genus Azotobacter, pseudomonads and Fusarium pathogens on wheat
grain was estimated at harvest and after six months’ storage. The
average size of yeast communities was significantly greater on wheat
kernels treated with a cell suspension of A. pullulans, compared with
control samples. In 2010-2011, biological control reduced the
abundance of some species of the genus Fusarium.
Abstract: This work presents a new algorithm based on a combination of fuzzy (FUZ), Dynamic Programming (DP), and Genetic Algorithm (GA) approach for capacitor allocation in distribution feeders. The problem formulation considers two distinct objectives related to total cost of power loss and total cost of capacitors including the purchase and installation costs. The novel formulation is a multi-objective and non-differentiable optimization problem. The proposed method of this article uses fuzzy reasoning for sitting of capacitors in radial distribution feeders, DP for sizing and finally GA for finding the optimum shape of membership functions which are used in fuzzy reasoning stage. The proposed method has been implemented in a software package and its effectiveness has been verified through a 9-bus radial distribution feeder for the sake of conclusions supports. A comparison has been done among the proposed method of this paper and similar methods in other research works that shows the effectiveness of the proposed method of this paper for solving optimum capacitor planning problem.
Abstract: Several different cements have been tested to evaluate
their potential to leach calcium, chromium and aluminum ions in soft
water environment. The research allows comparing some different
cements in order to the potential risk of water contamination. This
can be done only in the same environment. To reach the results in
reasonable short time intervals and to make heavy metals
measurements with high accuracy, demineralized water was used. In
this case the conditions of experiments are far away from the water
supply practice, but short time experiments and measurably high
concentrations of elements in the water solution are an important
advantage. Moreover leaching mechanisms can be recognized, our
experiments reported here refer to this kind of cements evaluation.
Abstract: With the increasing number of on-chip components and the critical requirement for processing power, Chip Multiprocessor (CMP) has gained wide acceptance in both academia and industry during the last decade. However, the conventional bus-based onchip communication schemes suffer from very high communication delay and low scalability in large scale systems. Network-on-Chip (NoC) has been proposed to solve the bottleneck of parallel onchip communications by applying different network topologies which separate the communication phase from the computation phase. Observing that the memory bandwidth of the communication between on-chip components and off-chip memory has become a critical problem even in NoC based systems, in this paper, we propose a novel 3D NoC with on-chip Dynamic Random Access Memory (DRAM) in which different layers are dedicated to different functionalities such as processors, cache or memory. Results show that, by using our proposed architecture, average link utilization has reduced by 10.25% for SPLASH-2 workloads. Our proposed design costs 1.12% less execution cycles than the traditional design on average.
Abstract: In this paper we propose a novel RF LDMOS structure which employs a thin strained silicon layer at the top of the channel and the N-Drift region. The strain is induced by a relaxed Si0.8 Ge0.2 layer which is on top of a compositionally graded SiGe buffer. We explain the underlying physics of the device and compare the proposed device with a conventional LDMOS in terms of energy band diagram and carrier concentration. Numerical simulations of the proposed strained silicon laterally diffused MOS using a 2 dimensional device simulator indicate improvements in saturation and linear transconductance, current drivability, cut off frequency and on resistance. These improvements are however accompanied with a suppression in the break down voltage.
Abstract: Buildings are considered as significant part in the
cities, which plays main role in organization and arrangement of city
appearance, which is affects image of that building facades, as an
connective between inner and outer space, have a main role in city
image and they are classified as rich image and poor image by people
evaluation which related to visual architectural and urban elements in
building facades. the buildings in Karimi street , in Lahijan city
where, lies in north of Iran, contain the variety of building's facade
types which, have made a city image in Historical part of Lahijan
city, while reflected the Iranian cities identity. The study attempt to
identify the architectural and urban elements that impression the
image of building facades in historical area, based on public
evaluation. Quantitative method were used and the data was collected
through questionnaire survey, the result presented architectural style,
color, shape, and design evaluated by people as most important factor
which should be understate in future development. in fact, the rich
architectural style with strong design make strong city image as weak
design make poor city image.
Abstract: In the paper a method of modeling text for Polish is
discussed. The method is aimed at transforming continuous input text
into a text consisting of sentences in so called canonical form, whose
characteristic is, among others, a complete structure as well as no
anaphora or ellipses. The transformation is lossless as to the content
of text being transformed. The modeling method has been worked
out for the needs of the Thetos system, which translates Polish
written texts into the Polish sign language. We believe that the
method can be also used in various applications that deal with the
natural language, e.g. in a text summary generator for Polish.
Abstract: Since the 1940s, many promising telepresence
research results have been obtained. However, telepresence
technology still has not reached industrial usage. As human
intelligence is necessary for successful execution of most manual
assembly tasks, the ability of the human is hindered in some cases,
such as the assembly of heavy parts of small/medium lots or
prototypes. In such a case of manual assembly, the help of industrial
robots is mandatory. The telepresence technology can be considered
as a solution for performing assembly tasks, where the human
intelligence and haptic sense are needed to identify and minimize the
errors during an assembly process and a robot is needed to carry
heavy parts. In this paper, preliminary steps to integrate the
telepresence technology into industrial robot systems are introduced.
The system described here combines both, the human haptic sense
and the industrial robot capability to perform a manual assembly task
remotely using a force feedback joystick. Mapping between the
joystick-s Degrees of Freedom (DOF) and the robot-s ones are
introduced. Simulation and experimental results are shown and future
work is discussed.