Abstract: Power system stability enhancement by simultaneous tuning of a Power System Stabilizer (PSS) and a Static Var Compensator (SVC)-based controller is thoroughly investigated in this paper. The coordination among the proposed damping stabilizers and the SVC internal voltage regulators has also been taken into consideration. The design problem is formulated as an optimization problem with a time-domain simulation-based objective function and Real-Coded Genetic Algorithm (RCGA) is employed to search for optimal controller parameters. The proposed stabilizers are tested on a weakly connected power system with different disturbances and loading conditions. The nonlinear simulation results are presented to show the effectiveness and robustness of the proposed control schemes over a wide range of loading conditions and disturbances. Further, the proposed design approach is found to be robust and improves stability effectively even under small disturbance and unbalanced fault conditions.
Abstract: Surface roughness (Ra) is one of the most important requirements in machining process. In order to obtain better surface roughness, the proper setting of cutting parameters is crucial before the process take place. This research presents the development of mathematical model for surface roughness prediction before milling process in order to evaluate the fitness of machining parameters; spindle speed, feed rate and depth of cut. 84 samples were run in this study by using FANUC CNC Milling α-Τ14ιE. Those samples were randomly divided into two data sets- the training sets (m=60) and testing sets(m=24). ANOVA analysis showed that at least one of the population regression coefficients was not zero. Multiple Regression Method was used to determine the correlation between a criterion variable and a combination of predictor variables. It was established that the surface roughness is most influenced by the feed rate. By using Multiple Regression Method equation, the average percentage deviation of the testing set was 9.8% and 9.7% for training data set. This showed that the statistical model could predict the surface roughness with about 90.2% accuracy of the testing data set and 90.3% accuracy of the training data set.
Abstract: On a such wide-area environment as a Grid, data
placement is an important aspect of distributed database systems. In
this paper, we address the problem of initial placement of database
no-replicated fragments in Grid architecture. We propose a graph
based approach that considers resource restrictions. The goal is to
optimize the use of computing, storage and communication
resources. The proposed approach is developed in two phases: in the
first phase, we perform fragment grouping using knowledge about
fragments dependency and, in the second phase, we determine an
efficient placement of the fragment groups on the Grid. We also
show, via experimental analysis that our approach gives solutions
that are close to being optimal for different databases and Grid
configurations.
Abstract: Key management represents a major and the most
sensitive part of cryptographic systems. It includes key generation,
key distribution, key storage, and key deletion. It is also considered
the hardest part of cryptography. Designing secure cryptographic
algorithms is hard, and keeping the keys secret is much harder.
Cryptanalysts usually attack both symmetric and public key
cryptosystems through their key management. We introduce a
protocol to exchange cipher keys over insecure communication
channel. This protocol is based on public key cryptosystem,
especially elliptic curve cryptosystem. Meanwhile, it tests the cipher
keys and selects only the good keys and rejects the weak one.
Abstract: In current global economics the application of Business Continuity Management is the prerequisite for sustainable competitive advantage in an organization. Business Continuity Management is a managerial which identifies the potential impact of losses in an organization. The aim of this paper is to identify and critically evaluate the relative advantages and disadvantages of deploying Business Continuity Management in an organization on the basis of seven criteria. The strongest advantage of Business Continuity Management is in its capacity to identify a crisis situation and help the organization to flexibly and also to keep the critical knowledge within the organization. By contrast the main disadvantage is that establishing Business Continuity Management in an organization is time-consuming and its implementation as an integral part of the organizational culture present significant difficulties.
Abstract: Attempts were made to identify anuran glial cells. They were found as nervous tissue resident. Having stage dependent morphotype changes, whereby, appeared as an ovoid to oval in resting state and amoeboid mrophotypes in activated state, stained fairly with methylene blue and take up Pelikane blue 10% aqueous solution, as well as having the ability to phagocytize heat killed Staphylococcus aureus. They were delineated from the migrating peripheral monocytes by morphotypic and morphometeric differences. Such criteria were consistence with glial cells. Thus, the anuran glial cells are being identified in the frog Rana ridibunda Pallas 1771 and this animal can be of use as a simple model for the immunobiology of glial cells.
Abstract: This study shows the effect of carbon towards
molybdenum carbide alloy when exposed to Microwave. This
technique is also known as Microwave Induced Alloying (MIA) for
the preparation of molybdenum carbide. In this study ammonium
heptamolybdate solution and carbon black powder were
heterogeneously mixed and exposed to microwave irradiation for 2
minutes. The effect on amount of carbon towards the produced alloy
on morphological and oxidation states changes during microwave is
presented. In this experiment, it is expected carbon act as a reducing
agent with the ratio 2:7 molybdenum to carbon as the optimum for
the production of molybdenum carbide alloy. All the morphological
transformations and changes in this experiment were followed and
characterized using X-Ray Diffraction and FESEM.
Abstract: Within the new world order, the term “crisis" is nowadays familiar to companies. Organizations are experiencing conditions which are surprising, uncertain, often adverse and usually unstable. The companies, who grasp the importance of transformation within the information age, have felt the need to develop modern methods to achieve the ability to thrive despite severe shocks. Through strategically managing human resource and developing appropriate elements of human resource system, companies can be assured for resolving the crisis. In this paper the role of HR system on resolving crisis has been evaluated. To help accomplish this, an insight on previous strategic HRM literature and an introduction to the elements and relationship within HR systems has been presented. It also reviews different attitude around resilience in literature. It continues by reviewing three elements central to developing an organization-s capacity for crisis resolving and it will demonstrate how designing proper elements of HR system can lead the organizations to possess the ability for passing through crisis. Finally it will evaluate an Iranian Insurance organization in case of one of the three central elements (specific cognitive ability) and observe how successful they were on developing an effective HR system to be ready for facing crisis.
Abstract: Bleeding in the digestive duct is an important diagnostic parameter for patients. Blood in the endoscopic image can be determined by investigating the color tone of blood due to the degree of oxygenation, under- or over- illumination, food debris and secretions, etc. However, we found that how to pre-process raw images obtained from the capsule detectors was very important. We applied various image process methods suitable for the capsule endoscopic image in order to remove noises and unbalanced sensitivities for the image pixels. The results showed that much improvement was achieved by additional pre-processing techniques on the algorithm of determining bleeding areas.
Abstract: The main objective of this study was to remove and recover Ni, Cu and Fe from a mixed metal system using sodium hypophosphite as a reducing agent and nickel powder as seeding material. The metal systems studied consisted of Ni-Cu, Ni-Fe and Ni-Cu-Fe solutions. A 5 L batch reactor was used to conduct experiments where 100 mg/l of each respective metal was used. It was found that the metals were reduced to their elemental form with removal efficiencies of over 80%. The removal efficiency decreased in the order Fe>Ni>Cu. The metal powder obtained contained between 97-99% Ni and was almost spherical and porous. Size enlargement by aggregation was the dominant particulate process.
Abstract: Cardiovascular diseases, principally atherosclerosis, are responsible for 30% of world deaths. Atherosclerosis is due to the formation of plaque. The fatty plaque may be at risk of rupture, leading typically to stroke and heart attack. The plaque is usually associated with a high degree of lumen reduction, called a stenosis.It is increasingly recognized that the initiation and progression of disease and the occurrence of clinical events is a complex interplay between the local biomechanical environment and the local vascular biology. The aim of this study is to investigate the flow behavior through a stenosed artery. A physical experiment was performed using an artery model and blood analogue fluid. An axisymmetric model constructed consists of contraction and expansion region that follow a mathematical form of cosine function. A 30% diameter reduction was used in this study. The flow field was measured using particle image velocimetry (PIV). Spherical particles with 20μm diameter were seeded in a water-glycerol-NaCl mixture. Steady flow Reynolds numbers are 250. The area of interest is the region after the stenosis where the flow separation occurs. The velocity field was measured and the velocity gradient was investigated. There was high particle concentration in the recirculation zone. High velocity gradient formed immediately after the stenosis throat created a lift force that enhanced particle migration to the flow separation area.
Abstract: This paper investigates the effect of product substitution in the single-period 'newsboy-type' problem in a fuzzy environment. It is supposed that the single-period problem operates under uncertainty in customer demand, which is described by imprecise terms and modelled by fuzzy sets. To perform this analysis, we consider the fuzzy model for two-item with upward substitution. This upward substitutability is reasonable when the products can be stored according to certain attribute levels such as quality, brand or package size. We show that the explicit consideration of this substitution opportunity increase the average expected profit. Computational study is performed to observe the benefits of product's substitution.
Abstract: A preliminary evaluation of the urban land system is
presented in the article together with the instruments of land policy in
Serbia. The main reason for the analysis is demand for
definition of reform framework for urban land management in
Serbia in the period of transition towards market-led system. It
is concluded that due to the limitations of the current regulation it
will be impossible in the future to apply market principles in the
urban land policy (supply and demand of land, land capitalization,
investment efficiency, et al.). Based on the estimation that the urban
land system and land policy are key factors of competitiveness
between regions and towns in Serbia, it is necessary to initiate
changes in this field. There are indicated on an option of privatization
of urban public land and possible establishment of leasehold land. A
comparative analysis of the possibilities of the reform urban land
system in Serbia has been carried out in relation to two approaches of
market systems: (a) with dominant private ownership of urban land
(neo/liberal approach) and (b) with dominant public ownership of
urban land (system of leasehold)whose findings can be a basis for
further study of the new system in Serbia.. The attanied results are
part of studies matter for the making of Strategy of territorial
development of Serbia.
Abstract: In this paper, determining the optimal proportionalintegral-
derivative (PID) controller gains of an single-area load
frequency control (LFC) system using genetic algorithm (GA) is
presented. The LFC is notoriously difficult to control optimally using
conventionally tuning a PID controller because the system parameters
are constantly changing. It is for this reason the GA as tuning strategy
was applied. The simulation has been conducted in MATLAB
Simulink package for single area power system. the simulation results
shows the effectiveness performance of under various disturbance.
Abstract: Although lots of research work has been done for
human pose recognition, the view-point of cameras is still critical
problem of overall recognition system. In this paper, view-point
insensitive human pose recognition is proposed. The aims of the
proposed system are view-point insensitivity and real-time processing.
Recognition system consists of feature extraction module, neural
network and real-time feed forward calculation. First, histogram-based
method is used to extract feature from silhouette image and it is
suitable for represent the shape of human pose. To reduce the
dimension of feature vector, Principle Component Analysis(PCA) is
used. Second, real-time processing is implemented by using Compute
Unified Device Architecture(CUDA) and this architecture improves
the speed of feed-forward calculation of neural network. We
demonstrate the effectiveness of our approach with experiments on
real environment.
Abstract: A group of Stellite alloys are studied in consideration
of temperature effects on their hardness and wear resistance. The
hardness test is conducted on a micro-hardness tester with a hot stage
equipped that allows heating the specimen up to 650°C. The wear
resistance of each alloy is evaluated using a pin-on-disc tribometer
with a heating furnace built-in that provides the temperature capacity
up to 450°C. The experimental results demonstrate that the hardness
and wear resistance of Stellite alloys behave differently at room
temperature and at high temperatures. The wear resistance of Stellite
alloys at room temperature mainly depends on their carbon content and
also influenced by the tungsten content in the alloys. However, at high
temperatures the wear mechanisms of Stellite alloys become more
complex, involving multiple factors. The relationships between
chemical composition, microstructure, hardness and wear resistance of
these alloys are studied, with focus on temperature effect on these
relations.
Abstract: With the development of technology, the growing
trend of fast and safe passenger transport, air pollution, traffic
congestion, increase in problems such as the increasing population
and the high cost of private vehicle usage made many cities around
the world with a population of more or less, start to build rail systems
as a means of urban transport in order to ensure the economic and
environmental sustainability and more efficient use of land in the
city. The implementation phase of rail systems costs much more than
other public transport systems. However, social and economic returns
in the long term made these systems the most popular investment tool
for planned and developing cities.
In our country, the purpose, goals and policies of transportation
plans are away from integrity, and the problems are not clearly
detected. Also, not defined and incomplete assessment of
transportation systems and insufficient financial analysis are the most
important cause of failure. Rail systems and other transportation
systems to be addressed as a whole is seen as the main factor in
increasing efficiency in applications that are not integrated yet in our
country to come to this point has led to the problem.
Abstract: Methanol-to-olefins coupled with transformation of
coal or natural gas to methanol gives an interesting and promising way
to produce ethylene and propylene. To investigate solid concentration
in gas-solid fluidized bed for methanol-to-olefins process catalyzed by
SAPO-34, a cold model experiment system is established in this paper.
The system comprises a gas distributor in a 300mm internal diameter
and 5000mm height acrylic column, the fiber optic probe system and
series of cyclones. The experiments are carried out at ambient
conditions and under different superficial gas velocity ranging from
0.3930m/s to 0.7860m/s and different initial bed height ranging from
600mm to 1200mm. The effects of radial distance, axial distance,
superficial gas velocity, initial bed height on solid concentration in the
bed are discussed. The effects of distributor shape and porosity on
solid concentration are also discussed. The time-averaged solid
concentration profiles under different conditions are obtained.
Abstract: Scheduling algorithms are used in operating systems
to optimize the usage of processors. One of the most efficient
algorithms for scheduling is Multi-Layer Feedback Queue (MLFQ)
algorithm which uses several queues with different quanta. The most
important weakness of this method is the inability to define the
optimized the number of the queues and quantum of each queue. This
weakness has been improved in IMLFQ scheduling algorithm.
Number of the queues and quantum of each queue affect the response
time directly. In this paper, we review the IMLFQ algorithm for
solving these problems and minimizing the response time. In this
algorithm Recurrent Neural Network has been utilized to find both
the number of queues and the optimized quantum of each queue.
Also in order to prevent any probable faults in processes' response
time computation, a new fault tolerant approach has been presented.
In this approach we use combinational software redundancy to
prevent the any probable faults. The experimental results show that
using the IMLFQ algorithm results in better response time in
comparison with other scheduling algorithms also by using fault
tolerant mechanism we improve IMLFQ performance.
Abstract: This research was conducted in the Lower Namkam
Irrigation Project situated in the Namkam River Basin in Thailand.
Degradation of groundwater quality in some areas is caused by saline
soil spots beneath ground surface. However, the tail regulated gate
structure on the Namkam River, a lateral stream of the Mekong
River. It is aimed for maintaining water level in the river at +137.5 to
+138.5 m (MSL) and flow to the irrigation canals based on a gravity
system since July 2009. It might leach some saline soil spots from
underground to soil surface if lack of understanding of the
conjunctive surface water and groundwater behaviors. This research
has been conducted by continuously the observing of both shallow
and deep groundwater level and quality from existing observation
wells. The simulation of surface water was carried out using a
hydrologic modeling system (HEC-HMS) to compute the ungauged
side flow catchments as the lateral flows for the river system model
(HEC-RAS). The constant water levels in the upstream of the
operated gate caused a slight rising up of shallow groundwater level
when compared to the water table. However, the groundwater levels
in the confined aquifers remained less impacted than in the shallow
aquifers but groundwater levels in late of wet season in some wells
were higher than the phreatic surface. This causes salinization of the
groundwater at the soil surface and might affect some crops. This
research aims for the balance of water stage in the river and efficient
groundwater utilization in this area.