Abstract: This paper presents the stabilization potential of Class
F pond ash (PA) from a coal fired thermal power station on tropical
peat soil. Peat or highly organic soils are well known for their high
compressibility, natural moisture content, low shear strength and
long-term settlement. This study investigates the effect of different
amount (i.e., 5, 10, 15 and 20%) of PA on peat soil, collected from
Sarawak, Malaysia, mainly compaction and unconfined compressive
strength (UCS) properties. The amounts of PA added to the peat soil
sample as percentage of the dry peat soil mass. With the increase in
PA content, the maximum dry density (MDD) of peat soil increases,
while the optimum moisture content (OMC) decreases. The UCS
value of the peat soils increases significantly with the increase of PA
content and also with curing periods. This improvement on
compressive strength of tropical peat soils indicates that PA has the
potential to be used as a stabilizer for tropical peat soil. Also, the use
of PA in soil stabilization helps in reducing the pond volume and
achieving environment friendly as well as a sustainable development
of natural resources.
Abstract: New advancement of technology and never satisfying demands of the civilization are putting huge pressure on the natural fuel resources and these resources are at a constant threat to its sustainability. To get the best out of the automobile, the optimum balance between performance and fuel economy is important. In the present state of art, either of the above two aspects are taken into mind while designing and development process which puts the other in the loss as increase in fuel economy leads to decrement in performance and vice-versa. In-depth observation of the vehicle dynamics apparently shows that large amount of energy is lost during braking and likewise large amount of fuel is consumed to reclaim the initial state, this leads to lower fuel efficiency to gain the same performance. Current use of Kinetic Energy Recovery System is only limited to sports vehicles only because of the higher cost of this system. They are also temporary in nature as power can be squeezed only during a small time duration and use of superior parts leads to high cost, which results on concentration on performance only and neglecting the fuel economy. In this paper Kinetic Energy Recovery System for storing the power and then using the same while accelerating has been discussed. The major storing element in this system is a Flat Spiral Spring that will store energy by compression and torsion.
The use of spring ensure the permanent storage of energy until used by the driver unlike present mechanical regeneration system in which the energy stored decreases with time and is eventually lost. A combination of internal gears and spur gears will be used in order to make the energy release uniform which will lead to safe usage. The system can be used to improve the fuel efficiency by assisting in overcoming the vehicle’s inertia after braking or to provide instant acceleration whenever required by the driver. The performance characteristics of the system including response time, mechanical efficiency and overall increase in efficiency are demonstrated. This technology makes the KERS (Kinetic Energy Recovery System) more flexible and economical allowing specific application while at the same time increasing the time frame and ease of usage.
Abstract: Curing of paints by exposure to UV radiations is
emerging as one of the best film forming technique as an alternative
to traditional solvent borne oxidative and thermal curing coatings.
The composition and chemistry of UV curable coatings and role of
multifunctional and monofunctional monomers, oligomers, and
photoinitiators have been discussed. The limitations imposed by
thermodynamic equilibrium and tendency for acrylic double bond
polymerizations during synthesis of multifunctional acrylates have
been presented. Aim of present investigation was thus to explore the
reaction variables associated with synthesis of multifunctional
acrylates. Zirconium oxychloride was evaluated as catalyst against
regular acid functional catalyst. The catalyzed synthesis of glyceryl
acrylate and neopentyl glycol acrylate was conducted by variation of
following reaction parameters: two different reactant molar ratios-
1:4 and 1:6; catalyst usage in % by moles on polyol- 2.5, 5.0 and 7.5
and two different reaction temperatures- 45 and 75 0C. The reaction
was monitored by determination of acid value and hydroxy value at
regular intervals, besides TLC, HPLC, and FTIR analysis of
intermediates and products. On the basis of determination of reaction
progress over 1-60 hrs, the esterification reaction was observed to
follow 2nd order kinetics with rate constant varying from 1*10-4 to
7*10-4. The thermal and catalytic components of second order rate
constant and energy of activation were also determined. Uses of
these kinetic and thermodynamic parameters in design of reactor for
manufacture of multifunctional acrylate ester have been presented.
The synthesized multifunctional acrylates were used to formulate and
apply UV curable clear coat followed by determination of curing
characteristics and mechanical properties of cured film. The overall
curing rates less than 05 min. were easily attained indicating
economical viability of radiation curable system due to faster
production schedules
Abstract: The purpose of this study was to investigate the effectiveness of a recreational workout program for adults with disabilities over two semesters. This investigation was an action study conducted in a naturalistic setting. Participants included equal numbers of adults with severe cognitive impairments (n = 35) and adults without disabilities (n = 35). Adults with disabilities severe cognitive impairments were trained 6 self-initiated workout activities over two semesters by adults without disabilities. The numbers of task-analyzed steps of each activity performed correctly by each participant at the first and last weeks of each semester were used for data analysis. Results of the paired t-tests indicate that across two semesters, significant differences between the first and last weeks were found on 4 out of the 6 task-analyzed workout activities at a statistical level of significance p < .05. The recreational workout program developed in this study was effective.
Abstract: People nowadays love to travel around the world.
Regardless of their location and time, they especially Muslims still need to perform their five times prayer. Normally for travelers, they
need to bring maps, compass and for Muslim, they even have to bring Qibla pointer when they travel. It is slightly difficult to
determine the Qibla direction and to know the time for each prayer. In this paper we present a new electronic device called Universal Qibla and Prayer Time Finder to locate the Qibla direction and to determine each prayer time based on the current user-s location. This device use PIC microcontroller equipped with digital compass and
Global Positioning System (GPS) where it will display the exact Qibla direction and prayer time automatically at any place in the world. This device is reliable, user friendly and accurate in
determining the Qibla direction and prayer time.
Abstract: The most suitable Semiconductor detector, Cadmium
Zinc Teloraid , has unique properties because of high Atomic number
and wide Brand Gap . It has been tried in this project with different
processes such as Lead , Diffusion , Produce and Recombination ,
effect of Trapping and injection carrier of CdZnTe , to get hole and
then present a complete answer of it . Then we should investigate the
movement of carrier ( Electron – Hole ) by using above answer.
Abstract: In this work we report on preliminary analysis of a novel optoelectronic gas sensor based on an optical fiber integrated with a tetrakis(4-sulfonatophenyl)porphyrin (TPPS) thin film. The sensitive materials are selectively deposited on the core region of a fiber tip by UV light induced deposition technique. A simple and cheap process which can be easily extended to different porphyrin derivatives. When the TPPS film on the fiber tip is exposed to acid and/or base vapors, dramatic changes occur in the aggregation structure of the dye molecules in the film, from J- to H-type, resulting in a profound modification of their corresponding reflectance spectra. From the achieved experimental results it is evident that the presence of intense and narrow band peaks in the reflected spectra could be monitored to detect hazardous vapors.
Abstract: In this paper, we propose a fuzzy aggregate
production planning (APP) model for blending problem in a brass
factory which is the problem of computing optimal amounts of raw
materials for the total production of several types of brass in a
period. The model has deterministic and imprecise parameters
which follows triangular possibility distributions. The brass casting
APP model can not always be solved by using common approaches
used in the literature. Therefore a mathematical model is presented
for solving this problem. In the proposed model, the Lai and
Hwang-s fuzzy ranking concept is relaxed by using one constraint
instead of three constraints. An application of the brass casting
APP model in a brass factory shows that the proposed model
successfully solves the multi-blend problem in casting process and
determines the optimal raw material purchasing policies.
Abstract: The conjugate gradient optimization algorithm is combined with the modified back propagation algorithm to yield a computationally efficient algorithm for training multilayer perceptron (MLP) networks (CGFR/AG). The computational efficiency is enhanced by adaptively modifying initial search direction as described in the following steps: (1) Modification on standard back propagation algorithm by introducing a gain variation term in the activation function, (2) Calculation of the gradient descent of error with respect to the weights and gains values and (3) the determination of a new search direction by using information calculated in step (2). The performance of the proposed method is demonstrated by comparing accuracy and computation time with the conjugate gradient algorithm used in MATLAB neural network toolbox. The results show that the computational efficiency of the proposed method was better than the standard conjugate gradient algorithm.
Abstract: This research seeks to investigate the frequency and
profitability of index arbitrage opportunities involving the SET50
futures, SET50 component stocks, and the ThaiDEX SET50 ETF
(ticker symbol: TDEX). In particular, the frequency and profit of
arbitrage are measured in the following three arbitrage tests: (1)
SET50 futures vs. ThaiDEX SET50 ETF, (2) SET50 futures vs.
SET50 component stocks, and (3) ThaiDEX SET50 ETF vs. SET50
component stocks are investigated. For tests (2) and (3), the problems
involve conic optimization and quadratic programming as subproblems.
This research is first to apply conic optimization and
quadratic programming techniques in the context of index arbitrage
and is first to investigate such index arbitrage in the Thai equity and
derivatives markets. Thus, the contribution of this study is twofold.
First, its results would help understand the contribution of the
derivatives securities to the efficiency of the Thai markets. Second,
the methodology employed in this study can be applied to other
geographical markets, with minor adjustments.
Abstract: Reversible logic is becoming more and more prominent
as the technology sets higher demands on heat, power, scaling
and stability. Reversible gates are able at any time to "undo" the
current step or function. Multiple-valued logic has the advantage of
transporting and evaluating higher bits each clock cycle than binary.
Moreover, we demonstrate in this paper, combining these disciplines
we can construct powerful multiple-valued reversible logic structures.
In this paper a reversible block implemented by pseudo floatinggate
can perform AD-function and a DA-function as its reverse
application.
Abstract: A numerical solution of the initial boundary value
problem of the suspended string vibrating equation with the
particular nonlinear damping term based on the finite difference
scheme is presented in this paper. The investigation of how the
second and third power terms of the nonlinear term affect the
vibration characteristic. We compare the vibration amplitude as a
result of the third power nonlinear damping with the second power
obtained from previous report provided that the same initial shape
and initial velocities are assumed. The comparison results show that
the vibration amplitude is inversely proportional to the coefficient of
the damping term for the third power nonlinear damping case, while
the vibration amplitude is proportional to the coefficient of the
damping term in the second power nonlinear damping case.
Abstract: We proposed the use of a Toda-Rayleigh ring as a
central pattern generator (CPG) for controlling hexapodal robots. We
show that the ring composed of six Toda-Rayleigh units coupled to
the limb actuators reproduces the most common hexapodal gaits. We
provide an electrical circuit implementation of the CPG and test our
theoretical results obtaining fixed gaits. Then we propose a method
of incorporation of the actuator (motor) dynamics in the CPG. With
this approach we close the loop CPG – environment – CPG, thus
obtaining a decentralized model for the leg control that does not
require higher level intervention to the CPG during locomotion in
a nonhomogeneous environments. The gaits generated by the novel
CPG are not fixed, but adapt to the current robot bahvior.
Abstract: This paper investigates the influence of various
parameters on the behaviour of water droplets on polymeric surfaces
under high electric fields. An inclined plane test was carried out to
understand the droplet behaviour in strong electric field. Parameters
such as water droplet conductivity, droplet volume, polymeric
surface roughness and droplet positioning with respect to the
electrodes were studied. The flashover voltage is affected by all
aforementioned parameters. The droplet positioning is in some cases
more vital than the droplet volume. Surface damages were analysed
using Scanning Electron Microscopy (SEM) studies and by Energy
dispersive X-ray Analysis (EDAX). It is observes that magnitude of
discharge have direct influence on amount of surface da
Abstract: The paper is included within the framework of a
complex research program, which was initiated from the hypothesis
arguing on the existence of a correlation between pineal indolic and
peptide hormones and the somatic development rhythm, including
thus the epithalamium-epiphysis complex involvement. At birds,
pineal gland contains a circadian oscillator, playing a main role in the
temporal organization of the cerebral functions. The secretion of
pineal indolic hormones is characterized by a high endogenous
rhythmic alternation, modulated by the light/darkness (L/D)
succession and by temperature as well. The research has been carried
out using 100 chicken broilers - “Ross" commercial hybrid,
randomly allocated in two experimental batches: Lc batch, reared
under a 12L/12D lighting schedule and Lexp batch, which was photic
pinealectomised through continuous exposition to light (150 lux, 24
hours, 56 days). Chemical and physical features of the meat issued
from breast fillet and thighs muscles have been studied, determining
the dry matter, proteins, fat, collagen, salt content and pH value, as
well. Besides the variations of meat chemical composition in relation
with lighting schedule, other parameters have been studied: live
weight dynamics, feed intake and somatic development degree. The
achieved results became significant since chickens have 7 days of
age, some variations of the studied parameters being registered,
revealing that the pineal gland physiologic activity, in relation with
the lighting schedule, could be interpreted through the monitoring of
the somatic development technological parameters, usually studied
within the chicken broilers rearing aviculture practice.
Abstract: Electricity market activities and a growing demand for electricity have led to heavily stressed power systems. This requires operation of the networks closer to their stability limits. Power system operation is affected by stability related problems, leading to unpredictable system behavior. Voltage stability refers to the ability of a power system to sustain appropriate voltage levels through large and small disturbances. Steady-state voltage stability is concerned with limits on the existence of steady-state operating points for the network. FACTS devices can be utilized to increase the transmission capacity, the stability margin and dynamic behavior or serve to ensure improved power quality. Their main capabilities are reactive power compensation, voltage control and power flow control. Among the FACTS controllers, Static Var Compensator (SVC) provides fast acting dynamic reactive compensation for voltage support during contingency events. In this paper, voltage stability assessment with appropriate representations of tap-changer transformers and SVC is investigated. Integrating both of these devices is the main topic of this paper. Effect of the presence of tap-changing transformers on static VAR compensator controller parameters and ratings necessary to stabilize load voltages at certain values are highlighted. The interrelation between transformer off nominal tap ratios and the SVC controller gains and droop slopes and the SVC rating are found. P-V curves are constructed to calculate loadability margins.
Abstract: In the fifteenth century, the Malacca Empire emerged
as the centre of Islamic civilization in the Malay Archipelago. The
history had been recorded in Sulalat Al-Salatin, an important literary
source about the genealogy of all Kings in Malacca. The objective of
this study was to analyze the understanding of sayings from Prophet
Muhammad among Malays in Malacca during the fifteenth century
through all of the hadith quoted in Sulalat Al-Salatin. This study used
content analysis methodology to validate the sayings where all of
them were critically analyzed and compared with the classical hadith
sources from prominent Muslim scholars. As a result, only two out of
the four quotations were considered as authentic sayings of Prophet
Muhammad. This study also showed the importance of the palace as
the centre of the Islamic education system and the role played by
Muslim preachers from outside of Malacca to propagate Islam in
Malacca.
Abstract: The rapid expansion of the web is causing the
constant growth of information, leading to several problems such as
increased difficulty of extracting potentially useful knowledge. Web
content mining confronts this problem gathering explicit information
from different web sites for its access and knowledge discovery.
Query interfaces of web databases share common building blocks.
After extracting information with parsing approach, we use a new
data mining algorithm to match a large number of schemas in
databases at a time. Using this algorithm increases the speed of
information matching. In addition, instead of simple 1:1 matching,
they do complex (m:n) matching between query interfaces. In this
paper we present a novel correlation mining algorithm that matches
correlated attributes with smaller cost. This algorithm uses Jaccard
measure to distinguish positive and negative correlated attributes.
After that, system matches the user query with different query
interfaces in special domain and finally chooses the nearest query
interface with user query to answer to it.
Abstract: Wireless Sensor Networks consist of small battery
powered devices with limited energy resources. once deployed, the
small sensor nodes are usually inaccessible to the user, and thus
replacement of the energy source is not feasible. Hence, One of the
most important issues that needs to be enhanced in order to improve
the life span of the network is energy efficiency. to overcome this
demerit many research have been done. The clustering is the one of
the representative approaches. in the clustering, the cluster heads
gather data from nodes and sending them to the base station. In this
paper, we introduce a dynamic clustering algorithm using genetic
algorithm. This algorithm takes different parameters into
consideration to increase the network lifetime. To prove efficiency of
proposed algorithm, we simulated the proposed algorithm compared
with LEACH algorithm using the matlab
Abstract: The adaptive backstepping controller for inverted pendulum is designed by using the general motion control model. Backstepping is a novel nonlinear control technique based on the Lyapunov design approach, used when higher derivatives of parameter estimation appear. For easy parameter adaptation, the mathematical model of the inverted pendulum converted into the motion control model. This conversion is performed by taking functions of unknown parameters and dynamics of the system. By using motion control model equations, inverted pendulum is simulated without any information about not only parameters but also measurable dynamics. Also these results are compare with the adaptive backstepping controller which extended with integral action that given from [1].