Abstract: This article presents a numerical study of the doublediffusive
mixed convection in a vertical channel filled with porous
medium by using non-equilibrium model. The flow is assumed
fully developed, uni-directional and steady state. The controlling
parameters are thermal Rayleigh number (RaT ), Darcy number (Da),
Forchheimer number (F), buoyancy ratio (N), inter phase heat transfer
coefficient (H), and porosity scaled thermal conductivity ratio
(γ). The Brinkman-extended non-Darcy model is considered. The
governing equations are solved by spectral collocation method. The
main emphasize is given on flow profiles as well as heat and solute
transfer rates, when two diffusive components in terms of buoyancy
ratio are in favor (against) of each other and solid matrix and fluid
are thermally non-equilibrium. The results show that, for aiding flow
(RaT = 1000), the heat transfer rate of fluid (Nuf ) increases upto a
certain value of H, beyond that decreases smoothly and converges
to a constant, whereas in case of opposing flow (RaT = -1000),
the result is same for N = 0 and 1. The variation of Nuf in (N,
Nuf )-plane shows sinusoidal pattern for RaT = -1000. For both cases
(aiding and opposing) the flow destabilize on increasing N by inviting
point of inflection or flow separation on the velocity profile. Overall,
the buoyancy force have significant impact on the non-Darcy mixed
convection under LTNE conditions.
Abstract: Introduction: Visual performance is an important factor in sport excellence. Visual involvement in a sport varies according to environmental demands associated with that sport. These environmental demands are matched by a task specific motor response. The purpose of this study was to determine if sport specific exercises will improve the visual performance of male rugby players, in order to achieve maximal results on the sports field. Materials & Methods: Twenty six adult male rugby players, aged 16-22, were chosen as subjects. In order to evaluate the effect of sport specific exercises on visual skills, a pre-test - post-test experimental group design was adopted for the study. Results: Significant differences (p≤0.05) were seen in the focussing, tracking, vergence, sequencing, eye-hand coordination and visualisation components Discussion & Conclusions: Sport specific exercises improved visual skills in rugby players which may provide them with an advantage over their opponents. This study suggests that these training programs and participation in regular on-line EyeDrills sports vision exercises (www.eyedrills.co.za) aimed at improving the athlete-s visual coordination, concentration, focus, hand-eye co-ordination, anticipation and motor response should be incorpotated in the rugby players exercise regime.
Abstract: There is significant interest in achieving technology
innovation through new product development activities. It is
recognized, however, that traditional project management practices
focused only on performance, cost, and schedule attributes, can often
lead to risk mitigation strategies that limit new technology
innovation. In this paper, a new approach is proposed for formally
managing and quantifying technology innovation. This approach uses
a risk-based framework that simultaneously optimizes innovation
attributes along with traditional project management and system
engineering attributes. To demonstrate the efficacy of the new riskbased
approach, a comprehensive product development experiment
was conducted. This experiment simultaneously managed the
innovation risks and the product delivery risks through the proposed
risk-based framework. Quantitative metrics for technology
innovation were tracked and the experimental results indicate that the
risk-based approach can simultaneously achieve both project
deliverable and innovation objectives.
Abstract: This paper focuses on the probabilistic numerical
solution of the problems in biomechanics and mining. Applications of
Simulation-Based Reliability Assessment (SBRA) Method are
presented in the solution of designing of the external fixators applied
in traumatology and orthopaedics (these fixators can be applied for
the treatment of open and unstable fractures etc.) and in the solution
of a hard rock (ore) disintegration process (i.e. the bit moves into the
ore and subsequently disintegrates it, the results are compared with
experiments, new design of excavation tool is proposed.
Abstract: The top-heavy demographic of low birth-rate and longer lifespan is a growing social problem, and one of its expected effects will be a shortage of young workers and a growing reliance on a workforce of middle-aged and older people. However, the environment of today's industrial workplace is not particularly suited to middle-aged and older workers, one notable problem being temperature control. Higher temperatures can cause health problems such as heat stroke, and the number of cases increases sharply in people over 65. Moreover, in conditions above 33°C, older people can develop circulatory system disorders, and also have a higher chance of suffering a fatal heart attack. We therefore propose a new method for controlling temperature in the indoor workplace. In this study two different verification experiments were conducted, with the proposed temperature control method being tested in cargo containers and conventional houses. The method's effectiveness was apparent in measurements of temperature and electricity consumption
Abstract: Breast cancer is the most common malignancy in the
world among women. Many therapies have been designed to treat
this disease. Mamectomy, chemotherapy and radiotherapy are still
the main therapies of breast cancer. However, the results were
unsatisfactory and still far from the ideal treatment.
PM 701is a natural product, has anticancer activity. The bioactive
fraction PMF and subfraction PMFK had been isolated from PM701.
PM 701 and its fractions were proved to have a cytotoxic properties
against different cancer cell lines. This article is directed for the
further examination of lyophilized PM701 and its active fractions on
the growth of breast cancer cells (MCF-7). PM 701, PMF or PMFK
were adding to the cultural medium, where MCF-7 is incubated.
PM 701, PMF or PMFK were able to inhibit significantly the
proliferation of MCF-7 cells, Moreover these new agents were
proved to induce apoptosis of the breast cancer cells; through its
direct effect on the nuclei.
Abstract: In line with changes of consumers modern lifestyle has call for the advertising strategy to change. This research is to find out how game with telepresence and product experience embedded in the computer game to affect users- intention to purchase. Game content developers are urging to consider of placing product message as part of game design strategy that can influence the game player-s intention to purchase. Experiment was carried out on two hundred and fifty undergraduate students who volunteered to participate in the Internet game playing activities. A factor analysis and correlation analysis was performed on items designed to measure telepresence, attitudes toward telepresence, and game player intention to purchase the product advertise in the game that respondents experienced. The results indicated that telepresence consist of interactive experience and product experience. The study also found that product experience is positively related to the game players- intention to purchase. The significance of product experience implies the usefulness of an interactive advertising in the game playing to attract players- intention to purchase the advertised product placed in the creative game design.
Abstract: Virtual Reality Modelling Language (VRML) is description language, which belongs to a field Window on World virtual reality system. The file, which is in VRML format, can be interpreted by VRML explorer in three-dimensional scene. VRML was created with aim to represent virtual reality on Internet easier. Development of 3D graphic is connected with Silicon Graphic Corporation. VRML 2.0 is the file format for describing interactive 3D scenes and objects. It can be used in collaboration with www, can be used for 3D complex representations creating of scenes, products or VR applications VRML 2.0 enables represent static and animated objects too. Interesting application of VRML is in area of manufacturing systems presentation.
Abstract: This paper focuses on a critical component of the
situational awareness (SA), the control of autonomous vertical flight for tactical unmanned aerial vehicle (TUAV). With the SA strategy,
we proposed a two stage flight control procedure using two autonomous control subsystems to address the dynamics variation
and performance requirement difference in initial and final stages of flight trajectory for a nontrivial nonlinear eight-rotor helicopter
model. This control strategy for chosen model of mini-TUAV has been verified by simulation of hovering maneuvers using software
package Simulink and demonstrated good performance for fast
stabilization of engines in hovering, consequently, fast SA with
economy in energy of batteries can be asserted during search-andrescue
operations.
Abstract: Arbitrarily shaped video objects are an important
concept in modern video coding methods. The techniques presently
used are not based on image elements but rather video objects having
an arbitrary shape. In this paper, spatial shape error concealment
techniques to be used for object-based image in error-prone
environments are proposed. We consider a geometric shape
representation consisting of the object boundary, which can be
extracted from the α-plane. Three different approaches are used to
replace a missing boundary segment: Bézier interpolation, Bézier
approximation and NURBS approximation. Experimental results on
object shape with different concealment difficulty demonstrate the
performance of the proposed methods. Comparisons with proposed
methods are also presented.
Abstract: In this paper an analytical crack propagation scenario
is proposed which assumes that a crack propagates in the tooth root in
both the crack depth direction and the tooth width direction, and
which is more reasonable and realistic for non-uniform load
distribution cases than the other presented scenarios. An analytical
approach is used for quantifying the loss of time-varying gear mesh
stiffness with the presence of crack propagation in the gear tooth root.
The proposed crack propagation scenario can be applied for crack
propagation modelling and monitoring simulation, but further
research is required for comparison and evaluation of all the
presented crack propagation scenarios from the condition monitoring
point of view.
Abstract: In response to address different development challenges, Tanzania is striving to achieve its fourth attribute of the National Development Vision, i.e. to have a well educated and learned society by the year 2025. One of the most cost effective methods that can reach a large part of the society in a short time is to integrate ICT in education through e-learning initiatives. However, elearning initiatives are challenged by limited or lack of connectivity to majority of secondary schools, especially those in rural and remote areas. This paper has explores the possibility for rural secondary school to access online e-Learning resources from a centralized e- Learning Management System (e-LMS). The scope of this paper is limited to schools that have computers irrespective of internet connectivity, resulting in two categories schools; those with internet access and those without. Different connectivity configurations have been proposed according to the ICT infrastructure status of the respective schools. However, majority of rural secondary schools in Tanzania have neither computers nor internet connection. Therefore this is a challenge to be addressed for the disadvantaged schools to benefit from e-Learning initiatives.
Abstract: In this paper, we represent protein structure by using
graph. A protein structure database will become a graph database.
Each graph is represented by a spectral vector. We use Jacobi
rotation algorithm to calculate the eigenvalues of the normalized
Laplacian representation of adjacency matrix of graph. To measure
the similarity between two graphs, we calculate the Euclidean
distance between two graph spectral vectors. To cluster the graphs,
we use M-tree with the Euclidean distance to cluster spectral vectors.
Besides, M-tree can be used for graph searching in graph database.
Our proposal method was tested with graph database of 100 graphs
representing 100 protein structures downloaded from Protein Data
Bank (PDB) and we compare the result with the SCOP hierarchical
structure.
Abstract: In this paper, the least-squares design of variable fractional-delay (VFD) finite impulse response (FIR) digital differentiators is proposed. The used transfer function is formulated so that Farrow structure can be applied to realize the designed system. Also, the symmetric characteristics of filter coefficients are derived, which leads to the complexity reduction by saving almost a half of the number of coefficients. Moreover, all the elements of related vectors or matrices for the optimal process can be represented in closed forms, which make the design easier. Design example is also presented to illustrate the effectiveness of the proposed method.
Abstract: Mammographic images and data analysis to
facilitate modelling or computer aided diagnostic (CAD) software development should best be done using a common database that can handle various mammographic image file
formats and relate these to other patient information.
This would optimize the use of the data as both primary
reporting and enhanced information extraction of research data could be performed from the single dataset. One desired
improvement is the integration of DICOM file header information into the database, as an efficient and reliable source of supplementary patient information intrinsically
available in the images.
The purpose of this paper was to design a suitable database to link and integrate different types of image files and gather common information that can be further used for research
purposes. An interface was developed for accessing, adding,
updating, modifying and extracting data from the common
database, enhancing the future possible application of the data in CAD processing.
Technically, future developments envisaged include the creation of an advanced search function to selects image files
based on descriptor combinations. Results can be further used for specific CAD processing and other research. Design of a
user friendly configuration utility for importing of the required fields from the DICOM files must be done.
Abstract: Noise level has critical effects on the diagnostic
performance of signal-averaged electrocardiogram (SAECG), because
the true starting and end points of QRS complex would be masked by
the residual noise and sensitive to the noise level. Several studies and
commercial machines have used a fixed number of heart beats
(typically between 200 to 600 beats) or set a predefined noise level
(typically between 0.3 to 1.0 μV) in each X, Y and Z lead to perform
SAECG analysis. However different criteria or methods used to
perform SAECG would cause the discrepancies of the noise levels
among study subjects. According to the recommendations of 1991
ESC, AHA and ACC Task Force Consensus Document for the use of
SAECG, the determinations of onset and offset are related closely to
the mean and standard deviation of noise sample. Hence this study
would try to perform SAECG using consistent root-mean-square
(RMS) noise levels among study subjects and analyze the noise level
effects on SAECG. This study would also evaluate the differences
between normal subjects and chronic renal failure (CRF) patients in
the time-domain SAECG parameters.
The study subjects were composed of 50 normal Taiwanese and 20
CRF patients. During the signal-averaged processing, different RMS
noise levels were adjusted to evaluate their effects on three time
domain parameters (1) filtered total QRS duration (fQRSD), (2) RMS
voltage of the last QRS 40 ms (RMS40), and (3) duration of the low
amplitude signals below 40 μV (LAS40). The study results
demonstrated that the reduction of RMS noise level can increase
fQRSD and LAS40 and decrease the RMS40, and can further increase
the differences of fQRSD and RMS40 between normal subjects and
CRF patients. The SAECG may also become abnormal due to the
reduction of RMS noise level. In conclusion, it is essential to establish
diagnostic criteria of SAECG using consistent RMS noise levels for
the reduction of the noise level effects.
Abstract: Creating3D environments, including characters and
cities, is a significantly time consuming process due to a large amount
of workinvolved in designing and modelling.There have been a
number of attempts to automatically generate 3D objects employing
shape grammars. However it is still too early to apply the mechanism
to real problems such as real-time computer games.The purpose of this
research is to introduce a time efficient and cost effective method to
automatically generatevarious 3D objects for real-time 3D games.
This Shape grammar-based real-time City Generation (RCG) model is
a conceptual model for generating 3Denvironments in real-time and
can be applied to 3D gamesoranimations. The RCG system can
generate even a large cityby applying fundamental principles of shape
grammars to building elementsin various levels of detailin real-time.
Abstract: Canola is a specific edible type of rapeseed, developed
in the 1970s, which contains about 40 percent oil. This research was
carried out to determine the yield and some quality characteristics of
some winter canola cultivars during the 2010-2011 vegetation period
in Central Anatolia of Turkey. In this research; Oase, Dante,
Californium, Excalibur, Elvis, ES Hydromel, Licord, Orkan, Vectra,
Nelson, Champlain and NK Petrol winter canola varieties were used
as material. The field experiment was set up in a “Randomized
Complete Block Design” with three replications on 21 September
2010. In this research; seed yield, oil content, protein content, oil
yield and protein yield were examined.
As a result of this research; seed yield, oil content, oil yield and
protein yield (except protein content) were significant differences
between the cultivars. The highest seed yield (6348 kg ha-1) was
obtained from the NK Petrol, while the lowest seed yield (3949 kg
ha-1) was determined from the Champlain cultivar was obtained. The
highest oil content (46.73%) was observed from Oase and the lowest
value was obtained from Vectra (41.87%) cultivar. The highest oil
yield (2950 kg ha-1) was determined from NK Petrol while the least
value (1681 kg ha-1) was determined from Champlain cultivar. The
highest protein yield (1539.3 kg ha-1) was obtained from NK Petrol
and the lowest protein yield (976.5 kg ha-1) was obtained from
Champlain cultivar.
The main purpose of the cultivation of oil crops, to increase the
yield of oil per unit area. According the result of this research, NK
Petrol cultivar which ranks first with regard to both seed yield and oil
yield between cultivars as the most suitable winter canola cultivar of
local conditions.
Abstract: The new programming technologies allow for the
creation of components which can be automatically or manually
assembled to reach a new experience in knowledge understanding
and mastering or in getting skills for a specific knowledge area. The
project proposes an interactive framework that permits the creation,
combination and utilization of components that are specific to
mathematical training in high schools.
The main framework-s objectives are:
• authoring lessons by the teacher or the students; all they need
are simple operating skills for Equation Editor (or something
similar, or Latex); the rest are just drag & drop operations,
inserting data into a grid, or navigating through menus
• allowing sonorous presentations of mathematical texts and
solving hints (easier understood by the students)
• offering graphical representations of a mathematical function
edited in Equation
• storing of learning objects in a database
• storing of predefined lessons (efficient for expressions and
commands, the rest being calculations; allows a high
compression)
• viewing and/or modifying predefined lessons, according to the
curricula
The whole thing is focused on a mathematical expressions minicompiler,
storing the code that will be later used for different
purposes (tables, graphics, and optimisations).
Programming technologies used. A Visual C# .NET
implementation is proposed. New and innovative digital learning
objects for mathematics will be developed; they are capable to
interpret, contextualize and react depending on the architecture
where they are assembled.
Abstract: The purpose of this study was to determine the
influence of physical activity and dietary fat intake on Body Mass
Index (BMI) of lecturers within a higher learning institutionalized
setting. The study adopted a Cross-sectional Correlational Design
and included 120 lecturers selected proportionately by simple
random sampling techniques from a population of 600 lecturers. Data
was collected using questionnaires, which had sections including
physical activity checklist adopted from the international physical
activity questionnaire (IPAQ), 24-hour food recall, anthropometric
measurements mainly weight and height. Analysis involved the use
of bivariate correlations and linear regression. A significant inverse
association was registered between BMI and duration (in minutes)
spent doing moderate intense physical activity per day (r=-0.322,
p