Abstract: This study investigated the effect of germination on chemical compositions, physio-chemical properties of malted (germinated) red sorghum flours and evaluated characteristics of gluten free breads from sorghum flour. Results showed that germinated sorghum flour had higher amylase activity, swelling power and solubility at 95°C, but lower in the peak, break down, final and set back viscosities than ungerminated sample (p≤0.05). Five gluten free breads made from sorghum flour blends, with different ratios of ungerminated and germinated sorghum flour, were compared for the physical properties with those made from wheat flour. Crumb hardness, cohesiveness, gumminess and chewiness of sorghum breads were found significantly higher than those of wheat bread. With increasing of ungerminated flour proportion, the bread hardness increased while the cohesiveness declined. Sorghum breads appeared red to human eyes with a*values of 10.41-15.77.Their crust and crumb colors differed significantly from those of wheat bread.
Abstract: In this paper we apply an Adaptive Network-Based
Fuzzy Inference System (ANFIS) with one input, the dependent
variable with one lag, for the forecasting of four macroeconomic
variables of US economy, the Gross Domestic Product, the inflation
rate, six monthly treasury bills interest rates and unemployment rate.
We compare the forecasting performance of ANFIS with those of the
widely used linear autoregressive and nonlinear smoothing transition
autoregressive (STAR) models. The results are greatly in favour of
ANFIS indicating that is an effective tool for macroeconomic
forecasting used in academic research and in research and application
by the governmental and other institutions
Abstract: This paper presents the experimental results of the
investigation of various properties related to the durability and longterm
performance of mortars made of Fly Ash blended cement, FA
and Ordinary Portland cement, OPC. The properties that were
investigated in an experimental program include; equilibration of
specimen in different relative humidity, determination of total
porosity, compressive strength, chloride permeability index, and
electrical resistivity. Fly Ash blended cement mortar specimens
exhibited 10% to 15% lower porosity when measured at equilibrium
conditions in different relative humidities as compared to the
specimens made of OPC mortar, which resulted in 6% to 8% higher
compressive strength of FA blended cement mortar specimens. The
effects of ambient relative humidity during sample equilibration on
porosity and strength development were also studied. For specimens
equilibrated in higher relative humidity conditions, such as 75%, the
total porosity of different mortar specimens was between 35% to 50%
less than the porosity of samples equilibrated in 12% relative
humidity, consequently leading to higher compressive strengths of
these specimens.A valid statistical correlation between values of
compressive strength, porosity and the degree of saturation was
obtained. Measured values of chloride permeability index of fly ash
blended cement mortar were obtained as one fourth to one sixth of
those measured for OPC mortar specimens, which indicates high
resistance against chloride ion penetration in FA blended cement
specimens, hence resulting in a highly durable mortar.
Abstract: In this paper we use the property of co-occurrence
matrix in finding parallel lines in binary pictures for fingerprint
identification. In our proposed algorithm, we reduce the noise by
filtering the fingerprint images and then transfer the fingerprint
images to binary images using a proper threshold. Next, we divide
the binary images into some regions having parallel lines in the same
direction. The lines in each region have a specific angle that can be
used for comparison. This method is simple, performs the
comparison step quickly and has a good resistance in the presence of
the noise.
Abstract: Efficient luminescence is reported for the first time in Eu2+ activated double Chlorides A2BCl4 (A=Alkali metal, B=Alkaline earth element). A simple wet-chemical preparation is described. Emission intensities are comparable to that of the commercial phosphor. Excitation covers near UV region. These phosphors may be useful for applications like solid state lighting, scintillation detectors and X-ray storage using photo-stimulable phosphors.
Abstract: Intrusion detection is a mechanism used to protect a
system and analyse and predict the behaviours of system users. An
ideal intrusion detection system is hard to achieve due to
nonlinearity, and irrelevant or redundant features. This study
introduces a new anomaly-based intrusion detection model. The
suggested model is based on particle swarm optimisation and
nonlinear, multi-class and multi-kernel support vector machines.
Particle swarm optimisation is used for feature selection by applying
a new formula to update the position and the velocity of a particle;
the support vector machine is used as a classifier. The proposed
model is tested and compared with the other methods using the KDD
CUP 1999 dataset. The results indicate that this new method achieves
better accuracy rates than previous methods.
Abstract: Calcium [Ca2+] is an important second messenger
which plays an important role in signal transduction. There are
several parameters that affect its concentration profile like buffer
source etc. The effect of stationary immobile buffer on Ca2+
concentration has been incorporated which is a very important
parameter needed to be taken into account in order to make the
model more realistic. Interdependence of all the important parameters
like diffusion coefficient and influx over [Ca2+] profile has been
studied. Model is developed in the form of advection diffusion
equation together with buffer concentration. A program has been
developed using finite volume method for the entire problem and
simulated on an AMD-Turion 32-bit machine to compute the
numerical results.
Abstract: Application of Expert System in the area of agriculture would take the form of Integrated Crop Management decision aids and would encompass water management, fertilizer management, crop protection systems and identification of implements. In order to remain competitive, the modern farmer often relies on agricultural specialists and advisors to provide information for decision-making. An expert system normally composed of a knowledge base (information, heuristics, etc.), inference engine (analyzes knowledge base), and end user interface (accepting inputs, generating outputs). Software named 'CROP-9-DSS' incorporating all modern features like, graphics, photos, video clippings etc. has been developed. This package will aid as a decision support system for identification of pest and diseases with control measures, fertilizer recommendation system, water management system and identification of farm implements for leading crops of Kerala (India) namely Coconut, Rice, Cashew, Pepper, Banana, four vegetables like Amaranthus, Bhindi, Brinjal and Cucurbits. 'CROP-9-DSS' will act as an expert system to agricultural officers, scientists in the field of agriculture and extension workers for decision-making and help them in suggesting suitable recommendations.
Abstract: In this paper, we introduce an effective strategy for
subgoal division and ordering based upon recursive subgoals and
combine this strategy with a genetic-based planning approach. This
strategy can be applied to domains with conjunctive goals. The main
idea is to recursively decompose a goal into a set of serializable
subgoals and to specify a strict ordering among the subgoals.
Empirical results show that the recursive subgoal strategy reduces the
size of the search space and improves the quality of solutions to
planning problems.
Abstract: In this study, we sought to investigate the mercury
removal efficiency of manganese oxides from natural gas. The
fundamental studies on mercury removal with manganese oxides
sorbents were carried out in a laboratory scale fixed bed reactor at 30
°C with a mixture of methane (20%) and nitrogen gas laden with 4.8
ppb of elemental mercury. Manganese oxides with varying surface
area and crystalline phase were prepared by conventional precipitation
method in this study. The effects of surface area, crystallinity and
other metal oxides on mercury removal efficiency were investigated.
Effect of Ag impregnation on mercury removal efficiency was also
investigated. Ag supported on metal oxide such titania and zirconia as
reference materials were also used in this study for comparison. The
characteristics of mercury removal reaction with manganese oxide
was investigated using a temperature programmed desorption (TPD)
technique.
Manganese oxides showed very high Hg removal activity (about
73-93% Hg removal) for first time use. Surface area of the manganese
oxide samples decreased after heat-treatment and resulted in complete
loss of Hg removal ability for repeated use after Hg desorption in the
case of amorphous MnO2, and 75% loss of the initial Hg removal
activity for the crystalline MnO2. Mercury desorption efficiency of
crystalline MnO2 was very low (37%) for first time use and high (98%)
after second time use. Residual potassium content in MnO2 may have
some effect on the thermal stability of the adsorbed Hg species.
Desorption of Hg from manganese oxides occurs at much higher
temperatures (with a peak at 400 °C) than Ag/TiO2 or Ag/ZrO2.
Mercury may be captured on manganese oxides in the form of mercury
manganese oxide.
Abstract: In this paper, the structural genetic algorithm is used to optimize the neural network to control the joint movements of robotic arm. The robotic arm has also been modeled in 3D and simulated in real-time in MATLAB. It is found that Neural Networks provide a simple and effective way to control the robot tasks. Computer simulation examples are given to illustrate the significance of this method. By combining Genetic Algorithm optimization method and Neural Networks for the given robotic arm with 5 D.O.F. the obtained the results shown that the base joint movements overshooting time without controller was about 0.5 seconds, while with Neural Network controller (optimized with Genetic Algorithm) was about 0.2 seconds, and the population size of 150 gave best results.
Abstract: Many multimedia communication applications require a
source to transmit messages to multiple destinations subject to quality
of service (QoS) delay constraint. To support delay constrained
multicast communications, computer networks need to guarantee an
upper bound end-to-end delay from the source node to each of
the destination nodes. This is known as multicast delay problem.
On the other hand, if the same message fails to arrive at each
destination node at the same time, there may arise inconsistency and
unfairness problem among users. This is related to multicast delayvariation
problem. The problem to find a minimum cost multicast
tree with delay and delay-variation constraints has been proven to
be NP-Complete. In this paper, we propose an efficient heuristic
algorithm, namely, Economic Delay and Delay-Variation Bounded
Multicast (EDVBM) algorithm, based on a novel heuristic function,
to construct an economic delay and delay-variation bounded multicast
tree. A noteworthy feature of this algorithm is that it has very high
probability of finding the optimal solution in polynomial time with
low computational complexity.
Abstract: Markov games can be effectively used to design
controllers for nonlinear systems. The paper presents two novel
controller design algorithms by incorporating ideas from gametheory
literature that address safety and consistency issues of the
'learned' control strategy. A more widely used approach for
controller design is the H∞ optimal control, which suffers from high
computational demand and at times, may be infeasible. We generate
an optimal control policy for the agent (controller) via a simple
Linear Program enabling the controller to learn about the unknown
environment. The controller is facing an unknown environment and
in our formulation this environment corresponds to the behavior rules
of the noise modeled as the opponent. Proposed approaches aim to
achieve 'safe-consistent' and 'safe-universally consistent' controller
behavior by hybridizing 'min-max', 'fictitious play' and 'cautious
fictitious play' approaches drawn from game theory. We empirically
evaluate the approaches on a simulated Inverted Pendulum swing-up
task and compare its performance against standard Q learning.
Abstract: Electro Discharge Sawing is a hybrid process
combining the features of SEDM and ECM. Its major characteristic is
extremely fast erosion rate compare to either of the above processes.
This paper brings out its relative feature of SEDM and EDS about
their erosion rates, surface roughness, and morphology of machined
surfaces.
Abstract: Waste problem is becoming a future problem all over the world. Magnesium wastes which can be used in recycling processes are produced by many industrial activities. Magnesium borates which have useful properties such as; high heat resistance, corrosion resistance, supermechanical strength, superinsulation, light weight, high coefficient of elasticity and so on. Addition, magnesium borates have great potential in the development of ceramic and detergents industry, whisker-reinforced composites, antiwear, and reducing friction additives.
In this study, using the starting materials of waste magnesium and H3BO3 the hydrothermal method was applied at a moderate temperature of 70oC with different reaction times. Several reaction times of waste magnesium to H3BO3 were selected as; 30, 60, 120, 240 minutes. After the synthesis, X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR) techniques were applied to products. As a result, the forms of Admontite [MgO(B2O3)3.7(H2O)] and Mcallisterite [Mg2(B6O7(OH)6)2.9(H2O)] were synthesized.
Abstract: Tea is a widely consumed beverage that contains many components. Caffeine belongs to this group of components called alkaloids contain nitrogen. In this study caffeine contents of three types of Turkish teas are determined by using extraction method. After condensation process, residue of caffeine and oil are obtained with evaporation. The oil which is in the residue is removed by hot water. Extraction process performed by using chloroform and the crude caffeine is obtained. From the results of experiments, caffeine contents are found in black tea, green tea and earl grey tea as 3.57±0.43%, 3.11±0.02%, 4.29±0.27%, respectively. Caffeine contents which are found in 1, 5 and 10 cups of tea are calculated. Furthermore, the daily intake of caffeine from black teas that affects human health is investigated.
Abstract: Variational methods for optical flow estimation are
known for their excellent performance. The method proposed by Brox
et al. [5] exemplifies the strength of that framework. It combines
several concepts into single energy functional that is then minimized
according to clear numerical procedure. In this paper we propose
a modification of that algorithm starting from the spatiotemporal
gradient constancy assumption. The numerical scheme allows to
establish the connection between our model and the CLG(H) method
introduced in [18]. Experimental evaluation carried out on synthetic
sequences shows the significant superiority of the spatial variant of
the proposed method. The comparison between methods for the realworld
sequence is also enclosed.
Abstract: The objectives of the study are to examine the
determinants of ERP implementation success factors of ERP
implementation. The result indicates that large scale ERP
implementation success consist of eight factors: project management
competence, knowledge sharing, ERP system quality , understanding,
user involvement, business process re-engineering, top management
support, organization readiness.
Abstract: The main goal of this seminal paper is to introduce the
application of Wireless Sensor Networks (WSN) in long distance
infrastructure monitoring (in particular in pipeline infrastructure
monitoring) – one of the on-going research projects by the Wireless
Communication Research Group at the department of Electronic and
Computer Engineering, Nnamdi Azikiwe University, Awka. The
current sensor network architectures for monitoring long distance
pipeline infrastructures are previewed. These are wired sensor
networks, RF wireless sensor networks, integrated wired and wireless
sensor networks. The reliability of these architectures is discussed.
Three reliability factors are used to compare the architectures in
terms of network connectivity, continuity of power supply for the
network, and the maintainability of the network. The constraints and
challenges of wireless sensor networks for monitoring and protecting
long distance pipeline infrastructure are discussed.
Abstract: A parametric study of a mixed-compression
supersonic inlet is performed and reported. The effects of inlet Mach
Numbers, varying from 4 to 10, and angle of attack, varying from 0
to 10, are reported for a constant inlet dynamic pressure. The paper
looked at the variations of mass flow rates through the inlet, gain in
entropy through the inlet, and the angles of the external oblique
shocks. The mass flow rates were found to decrease monotonically
with Mach numbers and increase with angle of attacks. On the other
hand the entropy gain through the inlet increased with increasing
Mach number and angle of attack. The variation in static pressure
was found to be identical from the inlet throat to the exit for Mach
number values higher than 6.