Abstract: A multi-block algorithm and its implementation in two-dimensional finite element numerical model CCHE2D are presented. In addition to a conventional Lagrangian Interpolation Method (LIM), a novel interpolation method, called Consistent Interpolation Method (CIM), is proposed for more accurate information transfer across the interfaces. The consistent interpolation solves the governing equations over the auxiliary elements constructed around the interpolation nodes using the same numerical scheme used for the internal computational nodes. With the CIM, the momentum conservation can be maintained as well as the mass conservation. An imbalance correction scheme is used to enforce the conservation laws (mass and momentum) across the interfaces. Comparisons of the LIM and the CIM are made using several flow simulation examples. It is shown that the proposed CIM is physically more accurate and produces satisfactory results efficiently.
Abstract: We report here structural, mechanical and I-V
characteristics of Zn1-xMxO ceramic samples with various x and M.
It is found that the considered dopants does not influence the wellknown
peaks related to wurtzite structure of ZnO ceramics, while the
shape and size of grains are clearly affected. Average crystalline
diameters, deduced from XRD are between 42 nm and 54 nm, which
are 70 times lower than those obtained from SEM micrographs.
Interestingly, the potential barrier could be formed by adding Cu up
to 0.20, and it is completely deformed by 0.025 Ni additions. The
breakdown field could be enhanced up to 4138 V/cm by 0.025 Cu
additions, followed by a decrease with further increase of Cu . On
the other hand a gradual decrease in VHN is reported for both
dopants and their values are higher in Ni samples as compared to Cu
samples. The electrical conductivity is generally improved by Ni,
while addition of Cu improved it only in the over doped region (≥
0.10). These results are discussed in terms of the difference of
valency and ferromagnetic ordering for both dopants as compared to
undoped sample.
Abstract: This paper presents a comparative study on
Vanadyl Phthalocyanine (VOPc) thin films deposited by thermal
evaporation and spin coating techniques. The samples
were prepared on cleaned glass substrates and annealed at
various temperatures ranging form 95oC to 155oC. To obtain
the morphological and structural properties of VOPc thin
films, X-ray diffraction (XRD) technique and atomic force
microscopy (AFM) have been implied. The AFM topographic
images show a very slight difference in the thermally grown
films, before and after annealing, however best results are
achieved for the spin-cast film annealed at 125oC. The XRD
spectra show no existence of the sharp peaks, suggesting the
material to be amorphous. The humps in the XRD patterns
indicate the presence of some crystallites.
Abstract: Due to short product life cycles, increasing variety of
products and short cycles of leap innovations manufacturing
companies have to increase the flexibility of factory structures.
Flexibility of factory structures is based on defined factory planning
processes in which product, process and resource data of various
partial domains have to be considered. Thus factory planning
processes can be characterized as iterative, interdisciplinary and
participative processes [1]. To support interdisciplinary and
participative character of planning processes, a federative factory
data management (FFDM) as a holistic solution will be described.
FFDM is already implemented in form of a prototype. The interim
results of the development of FFDM will be shown in this paper. The
principles are the extracting of product, process and resource data
from documents of various partial domains providing as web services
on a server. The described data can be requested by the factory
planner by using a FFDM-browser.
Abstract: Functional gastrointestinal disorders (FGID) affect millions of people spread all age regardless of race and sex. Emotional stress and obesity have been associated with increased reporting of gastrointestinal (GI) symptoms, but the relationship between FGID and risk factors (emotional stress or obesity) is unclear. Our aim was to assess the changes of the mechanical characteristics on the gastrointestinal tracts of the mentally fatigued obese and normal rat models. Finally, using the physical characteristics with micro-indentation test, we made a close investigation into the relation between FGID and risk factors quantitatively.
Abstract: A wireless power transfer system can attribute to the
fields in robot, aviation and space in which lightening the weight of
device and improving the movement play an important role. A
wireless power transfer system was investigated to overcome the
inconvenience of using power cable. Especially a wireless power
transfer technology is important element for mobile robots. We
proposed the wireless power transfer system of the half-bridge
resonant converter with the frequency tracking and optimized
power transfer control unit. And the possibility of the application
and development system was verified through the experiment with
LED loads.
Abstract: The paper investigates the main issues concerning the activity of mergers and acquisitions in Romania in the period 2000- 2004. As in the first decade after the failure of the socialist economy the market of M&A was living its infancy based exclusively on privatization transactions, after 2000 the market entered in a stage of maturity. We are investigated both the registered evolutions in terms of number and value of transactions, and some sectoral issues, concerning the most important industries affected by the M&A process.
Abstract: This paper discusses the effectiveness of the EEG signal
for human identification using four or less of channels of two different
types of EEG recordings. Studies have shown that the EEG signal
has biometric potential because signal varies from person to person
and impossible to replicate and steal. Data were collected from 10
male subjects while resting with eyes open and eyes closed in 5
separate sessions conducted over a course of two weeks. Features
were extracted using the wavelet packet decomposition and analyzed
to obtain the feature vectors. Subsequently, the neural networks
algorithm was used to classify the feature vectors. Results show that,
whether or not the subjects- eyes were open are insignificant for a 4–
channel biometrics system with a classification rate of 81%. However,
for a 2–channel system, the P4 channel should not be included if data
is acquired with the subjects- eyes open. It was observed that for 2–
channel system using only the C3 and C4 channels, a classification
rate of 71% was achieved.
Abstract: Extraction of lactic acid by emulsion liquid membrane technology (ELM) using n-trioctyl amine (TOA) in n-heptane as carrier within the organic membrane along with sodium carbonate as acceptor phase was optimized by using response surface methodology (RSM). A three level Box-Behnken design was employed for experimental design, analysis of the results and to depict the combined effect of five independent variables, vizlactic acid concentration in aqueous phase (cl), sodium carbonate concentration in stripping phase (cs), carrier concentration in membrane phase (ψ), treat ratio, and batch extraction time (τ)
with equal volume of organic and external aqueous phase on lactic acid extraction efficiency. The maximum lactic acid extraction efficiency (ηext) of 98.21%from aqueous phase in a batch reactor using ELM was found at the optimized values for test variables, cl, cs, ψ, and τ as 0.06 [M], 0.18 [M], 4.72 (%,v/v), 1.98 (v/v) and 13.36 min respectively.
Abstract: This research analyzes factors affecting the success of
Litecoin Value within Thailand and develops a guideline for selfreliance
for effective business implementation. Samples in this study
included 119 people through surveys. The results revealed four main
factors affecting the success as follows: 1) Future Career training
should be pursued in applied Litecoin development. 2) Didn't grasp
the concept of a digital currency or see the benefit of a digital
currency. 3) There is a great need to educate the next generation of
learners on the benefits of Litecoin within the community. 4) A great
majority didn't know what Litecoin was.
The guideline for self-reliance planning consisted of 4 aspects: 1)
Development planning: by arranging meet up groups to conduct
further education on Litecoin and share solutions on adoption into
every day usage. Local communities need to develop awareness of
the usefulness of Litecoin and share the value of Litecoin among
friends and family. 2) Computer Science and Business Management
staff should develop skills to expand on the benefits of Litecoin
within their departments. 3) Further research should be pursued on
how Litecoin Value can improve business and tourism within
Thailand. 4) Local communities should focus on developing Litecoin
awareness by encouraging street vendors to accept Litecoin as
another form of payment for services rendered.
Abstract: Study fluid flow and heat transfer characteristics of
microchannel in a primary Cross-corrugated(CC) surface recuperators
with corrugations and without corrugations, using CFD method. The
pitch-over-height ratios P/H of Cross-corrugated (CC) surface is from
1.5 to 4.0, included angles β=75º. The study was performed using CFD
software FLUENT to create unit model and simulate fluid
temperature, velocity, heat transfer coefficient and other parameters.
The results from these simulations were compared to experimental
data. It is concluded that, when the Reynolds number is constant, if
increase P/H, j/f will decrease, also the decreasing trend will become
weak. Under the condition of P/H=2.2, if increase the inlet velocity j/f
will decrease; in addition, the heat transfer performance in surface
with corrugation will increase 10% compared to that without
corrugation. The study results can provide the basis to optimize the
design, select the type of heat transfer surface, the scale structure, and
heat-transfer surface arrangement for recuperators.
Abstract: The report focuses on such an important indicator of the nature and direction of development of ethnic and cultural processes in the Republic of Kazakhstan, as ethno linguistic situation. It is shown that, in essence, on the one hand, expresses the degree of the actual propagation and the level of use of the languages of the various ethnic communities. On the other hand, reflects the important patterns, trends and prospects of ethno-cultural and ethnodemographic processes in the Republic. It is important to note that the ethno linguistic situation in different regions of Kazakhstan, due to its more dynamic and much more difficult to demonstrate a much greater variety of options when compared with the ethnic situation in the country. For the two major ethnic groups of the republic – Kazakh and Russian language ethno differentiating retains its value, while for the other ethnic groups observed decline in the importance of this indicator. As you know, the language of international communication in the country is Russian. As the censuses of population, the Russian language in many areas of Northern, Central and Eastern Kazakhstan becomes a means of ethno linguistic development for most of the non-Russian population. This is most clearly illustrated by the Germans, and the Slavic ethnic groups. In this case, the Russian language is not just a means of international communication for a number of ethnic groups, and ethnic groups, it becomes a factor of ethnic self-expression. The value of the Kazakh language as their mother tongue for the other groups of the population is small. More clearly it can be traced only to the Turkic-speaking population of the republic – Uzbeks, Uighurs, Tatars, Turks, etc. The state Kazakh language is a means of international communication in the Western and Southern Kazakhstan, with a predominance of the Kazakh population. The report shows that the most important factor in the development of ethno-linguistic and ethno-cultural processes is bilingualism. Comparative analysis of materials census shows, first, on the increase of the proportion of bilingual population among Kazakhs and Russian, and second, to reduce the proportion of bilingual population of other ethnic groups living in Kazakhstan, and third, a higher proportion bilingual population among residents than rural residents, regardless of their ethnicity. Bilingualism is mainly of a "national Kazakh", "national Russian" or "Kazakh-national" or "Russian-national" character. The President N.A. Nazarbayev said that the Kazakh language is the most important factor in the consolidation of the people of Kazakhstan. He therefore called on government and other state and local representative bodies fully develop the state language, to create all the necessary organizational, material and technical conditions for free and open learning the state language by all citizens of the Republic of Kazakhstan.
Abstract: We construct an exponentially weighted Legendre- Gauss Tau method for solving differential equations with oscillatory solutions. The proposed method is applied to Sturm-Liouville problems. Numerical examples illustrating the efficiency and the high accuracy of our results are presented.
Abstract: The paper presents the design concept of a unitselection
text-to-speech synthesis system for the Slovenian language.
Due to its modular and upgradable architecture, the system can be
used in a variety of speech user interface applications, ranging from
server carrier-grade voice portal applications, desktop user interfaces
to specialized embedded devices.
Since memory and processing power requirements are important
factors for a possible implementation in embedded devices, lexica
and speech corpora need to be reduced. We describe a simple and
efficient implementation of a greedy subset selection algorithm that
extracts a compact subset of high coverage text sentences. The
experiment on a reference text corpus showed that the subset
selection algorithm produced a compact sentence subset with a small
redundancy.
The adequacy of the spoken output was evaluated by several
subjective tests as they are recommended by the International
Telecommunication Union ITU.
Abstract: The operating control parameters of injection
flushing type of electrical discharge machining process on stainless
steel 304 workpiece using copper tools are being optimized
according to its individual machining characteristic i.e. Electrode
Wear Ratio (EWR). Higher EWR would give bad dimensional
precision for the EDM machined workpiece because of high
electrode wear. Hence, the quality characteristic for EWR is set to
lower-the-better to achieve the optimum dimensional precision for
the machined workpiece. Taguchi method has been used for the
construction, layout and analysis of the experiment for EWR
machining characteristic. The use of Taguchi method in the
experiment saves a lot of time and cost of preparing and machining
the experiment samples. Therefore, an L18 Orthogonal array
which was the fundamental component in the statistical design of
experiments has been used to plan the experiments and Analysis of
Variance (ANOVA) is used to determine the optimum machining
parameters for this machining characteristic. The control
parameters selected for this optimization experiments are polarity,
pulse on duration, discharge current, discharge voltage, machining
depth, machining diameter and dielectric liquid pressure. The
result had shown that negative polarity machining parameter
setting will decreases EWR.
Abstract: In the present work, a comparative study on the
microstructure and mechanical properties of as cast, cast aged and
forged aged A356 alloy has been investigated. The study reveals that
mechanical properties of A356 alloy are highly influenced by melt
treatment and solid state processing. Cast aged alloys achieve highest
strength and hardness compared to as cast and forge aged ones. Ones
treated with combined addition of grain refiners and modifiers
achieve maximum strength and hardness. Cast aged A356 alloy
possesses higher wear resistance compared to as cast and forge aged
ones. Forging improves both strength and ductility of alloys over as
cast ones. However, the improvement in ductility is perceptible only
for properly grain refined and modified alloys. Ones refined with
0.65% Al-3Ti shows highest improvement in ductility while ones
treated with 0.20% Al-10Sr exhibits less improvement in ductility.
Abstract: In recent times there has been a growing interest in the
development of quasi-two-dimensional niobium pentoxide (Nb2O5)
as a semiconductor for the potential electronic applications such as
capacitors, filtration, dye-sensitised solar cells and gas sensing
platforms. Therefore once the purpose is established, Nb2O5 can be
prepared in a number of nano- and sub-micron-structural
morphologies that include rods, wires, belts and tubes. In this study
films of Nb2O5 were prepared on gold plated silicon substrate using
spin-coating technique and subsequently by mechanical exfoliation.
The reason this method was employed was to achieve layers of less
than 15nm in thickness. The sintering temperature of the specimen
was 800oC. The morphology and structural characteristics of the
films were analyzed by Atomic Force Microscopy (AFM), Raman
Spectroscopy, X-ray Photoelectron Spectroscopy (XPS).
Abstract: In this paper, we present a new learning algorithm for
anomaly based network intrusion detection using improved self
adaptive naïve Bayesian tree (NBTree), which induces a hybrid of
decision tree and naïve Bayesian classifier. The proposed approach
scales up the balance detections for different attack types and keeps
the false positives at acceptable level in intrusion detection. In
complex and dynamic large intrusion detection dataset, the detection
accuracy of naïve Bayesian classifier does not scale up as well as
decision tree. It has been successfully tested in other problem
domains that naïve Bayesian tree improves the classification rates in
large dataset. In naïve Bayesian tree nodes contain and split as
regular decision-trees, but the leaves contain naïve Bayesian
classifiers. The experimental results on KDD99 benchmark network
intrusion detection dataset demonstrate that this new approach scales
up the detection rates for different attack types and reduces false
positives in network intrusion detection.
Abstract: Hydraulic conductivity is one parameter important for predicting the movement of water and contaminants dissolved in the water through the soil. The hydraulic conductivity is measured on soil samples in the lab and sometimes tests carried out in the field. The hydraulic conductivity has been related to soil particle diameter by a number of investigators. In this study, 25 set of soil samples with sand texture. The results show approximately success in predicting hydraulic conductivity from particle diameters data. The following relationship obtained from multiple linear regressions on data (R2 = 0.52): Where d10, d50 and d60, are the soil particle diameter (mm) that 10%, 50% and 60% of all soil particles are finer (smaller) by weight and Ks, saturated hydraulic conductivity is expressed in m/day. The results of regression analysis showed that d10 play a more significant role with respect to Ks, saturated hydraulic conductivity (m/day), and has been named as the effective parameter in Ks calculation.
Abstract: The main idea behind in network aggregation is that,
rather than sending individual data items from sensors to sinks,
multiple data items are aggregated as they are forwarded by the
sensor network. Existing sensor network data aggregation techniques
assume that the nodes are preprogrammed and send data to a central
sink for offline querying and analysis. This approach faces two major
drawbacks. First, the system behavior is preprogrammed and cannot
be modified on the fly. Second, the increased energy wastage due to
the communication overhead will result in decreasing the overall
system lifetime. Thus, energy conservation is of prime consideration
in sensor network protocols in order to maximize the network-s
operational lifetime. In this paper, we give an energy efficient
approach to query processing by implementing new optimization
techniques applied to in-network aggregation. We first discuss earlier
approaches in sensors data management and highlight their
disadvantages. We then present our approach “Energy Efficient
Indexed Aggregation" (EEIA) and evaluate it through several
simulations to prove its efficiency, competence and effectiveness.