Abstract: Setting up of rural telecentres, popularly referred to as
Common Service Centres (CSCs), are considered one of the initial
forerunners of rural e-Governance initiatives under the Government
of India-s National e-Governance Plan (NeGP). CSCs are
implemented on public-private partnership (PPP) – where State
governments play a major role in facilitating the establishment of
CSCs and investments are made by private companies referred to as
Service Centre Agencies (SCAs). CSC implementation is expected to
help in improving public service delivery in a transparent and
efficient manner. However, there is very little research undertaken to
study the actual impact of CSC implementation at the grassroots
level. This paper addresses the gap by identifying the circumstances,
concerns and expectations from the point-of-view of citizens and
examining the finer aspects of social processes in the context of rural
e-Governance.
Abstract: Solid waste can be considered as an urban burden or
as a valuable resource depending on how it is managed. To meet the
rising demand for energy and to address environmental concerns, a
conversion from conventional energy systems to renewable resources
is essential. For the sustainability of human civilization, an
environmentally sound and techno-economically feasible waste
treatment method is very important to treat recyclable waste. Several
technologies are available for realizing the potential of solid waste as
an energy source, ranging from very simple systems for disposing of
dry waste to more complex technologies capable of dealing with
large amounts of industrial waste. There are three main pathways for
conversion of waste material to energy: thermo chemical,
biochemical and physicochemical. This paper investigates the thermo
chemical conversion of solid waste for energy recovery. The
processes, advantages and dis-advantages of various thermo chemical
conversion processes are discussed and compared. Special attention
is given to Gasification process as it provides better solutions
regarding public acceptance, feedstock flexibility, near-zero
emissions, efficiency and security. Finally this paper presents
comparative statements of thermo chemical processes and introduces
an integrated waste management system.
Abstract: A computational platform is presented in this
contribution. It has been designed as a virtual laboratory to be used
for exploring optimization algorithms in biological problems. This
platform is built on a blackboard-based agent architecture. As a test
case, the version of the platform presented here is devoted to the
study of protein folding, initially with a bead-like description of the
chain and with the widely used model of hydrophobic and polar
residues (HP model). Some details of the platform design are
presented along with its capabilities and also are revised some
explorations of the protein folding problems with different types of
discrete space. It is also shown the capability of the platform to
incorporate specific tools for the structural analysis of the runs in
order to understand and improve the optimization process.
Accordingly, the results obtained demonstrate that the ensemble of
computational tools into a single platform is worthwhile by itself,
since experiments developed on it can be designed to fulfill different
levels of information in a self-consistent fashion. By now, it is being
explored how an experiment design can be useful to create a
computational agent to be included within the platform. These
inclusions of designed agents –or software pieces– are useful for the
better accomplishment of the tasks to be developed by the platform.
Clearly, while the number of agents increases the new version of the
virtual laboratory thus enhances in robustness and functionality.
Abstract: Multiphasing of dc-dc converters has been known to give technical and economical benefits to low voltage high power buck regulator modules. A major advantage of multiphasing dc-dc converters is the improvement of input and output performances in the buck converter. From this aspect, a potential use would be in renewable energy where power quality plays an important factor. This paper presents the design of a 2-phase 200W boost converter for battery charging application. Analysis of results from hardware measurement of the boost converter demonstrates the benefits of using multiphase. Results from the hardware prototype of the 2-phase boost converter further show the potential extension of multiphase beyond its commonly used low voltage high current domains.
Abstract: National Biodiversity Database System (NBIDS) has
been developed for collecting Thai biodiversity data. The goal of this
project is to provide advanced tools for querying, analyzing,
modeling, and visualizing patterns of species distribution for
researchers and scientists. NBIDS data record two types of datasets:
biodiversity data and environmental data. Biodiversity data are
specie presence data and species status. The attributes of biodiversity
data can be further classified into two groups: universal and projectspecific
attributes. Universal attributes are attributes that are common
to all of the records, e.g. X/Y coordinates, year, and collector name.
Project-specific attributes are attributes that are unique to one or a
few projects, e.g., flowering stage. Environmental data include
atmospheric data, hydrology data, soil data, and land cover data
collecting by using GLOBE protocols. We have developed webbased
tools for data entry. Google Earth KML and ArcGIS were used
as tools for map visualization. webMathematica was used for simple
data visualization and also for advanced data analysis and
visualization, e.g., spatial interpolation, and statistical analysis.
NBIDS will be used by park rangers at Khao Nan National Park, and
researchers.
Abstract: This paper explores the plant maintenance management system that has been used by giant oil and gas company in Malaysia. The system also called as PMMS used to manage the upstream operations for more than 100 plants of the case study company. Moreover, from the observations, focus group discussion with PMMS personnel and application through simulation (SAP R/3), the paper reviews the step-by-step approach and the elements that required for the PMMS. The findings show that the PMMS integrates the overall business strategy in upstream operations that consist of asset management, work management and performance management. In addition, PMMS roles are to help operations personnel organize and plan their daily activities, to improve productivity and reduce equipment downtime and to help operations management analyze the facilities and create performance, and to provide and maintain the operational effectiveness of the facilities.
Abstract: The article deals with the classification of alternative water resources in terms of potential risks which is the prerequisite for incorporating these water resources to the emergency plans. The classification is based on the quantification of risks resulting from possible damage, disruption or total destruction of water resource caused by natural and anthropogenic hazards, assessment of water quality and availability, traffic accessibility of the assessed resource and finally its water yield. The aim is to achieve the development of an integrated rescue system, which will be capable of supplying the population with drinking water on the whole stricken territory during the states of emergency.
Abstract: In this paper, a novel copyright protection scheme for digital images based on Visual Cryptography and Statistics is proposed. In our scheme, the theories and properties of sampling distribution of means and visual cryptography are employed to achieve the requirements of robustness and security. Our method does not need to alter the original image and can identify the ownership without resorting to the original image. Besides, our method allows multiple watermarks to be registered for a single host image without causing any damage to other hidden watermarks. Moreover, it is also possible for our scheme to cast a larger watermark into a smaller host image. Finally, experimental results will show the robustness of our scheme against several common attacks.
Abstract: Endovascular aneurysm repair is a new and minimally invasive repair for patients with abdominal aortic aneurysm (AAA). This method has potential advantages that are incomparable with other repair methods. However, the enlargement of aneurysm in the absence of endoleak, which is known as endotension, may occur as one of post-operative compliances of this method. Typically, endotension is mainly as a result of pressure transmitted to aneurysm sac by endovascular installed graft. After installation of graft the aneurysm sac reduces significantly but remains non-zero. There are some factors which affect this pressure transmitted. In this study, the geometry features of installed vascular graft have been considered. It is inferred that graft neck angle and iliac bifurcation angle are two factors which can affect the drag force on graft and consequently the pressure transmitted to aneurysm.
Abstract: Bean common mosaic necrosis virus (BCMNV) is a
potyvirus with a worldwide distribution. This virus causes serious
economic losses in Iran in many leguminoses. During 20008,
samples were collected from soybeans fields in Tehran Province.
Four isolates (S1, S2 and S3) were inoculated on 15 species of
Cucurbitaceae, Chenopodiaceae, Solanacae and Leguminosae.
Chenopodium quinoa and C. amaranticolor.
Did not developed any symptoms.all isolates caused mosaic
symptoms on Phaseolus vulgaris cv. Red Kidney and P. vulgaris cv.
Bountiful. The molecular weights of coat protein using SDS-PAGE
and western blotting were estimated at 33 kDa. Reverse transcription
polymerase chain reaction (RT-PCR) was performed using one
primer pairs designed by L. XU et al. An approximately 920 bp
fragment was amplified with a specific primer.
Abstract: Ten lactating multiparous Holstein cows were used in
a cross-over design with two dietary treatments and 28-d periods
(with 14 d as an adaptation) to study the effect of restaurant fat on
milk production and composition. Each cow was offered 14.7 kg
DM /d of the basal concentrate diet based on barley and corn (crude
protein = 17.7%, neutral detergent fiber = 23.5%, and acid detergent
fiber = 5.8% of dry matter) with free access to alfalfa. Dietary
treatments were arranged as supplying each cow with 0 (CONTROL)
or 150 g/day (RF) of restaurant fat. Supplemental RF did not
significantly (P > 0.25) affect milk yield, composition, and
composition yields, except for milk fat contents. Milk fat contents
were depressed (P < 0.05) with supplemental RF. Our results indicate
that RF could depress milk fat without affecting milk yield and that
the depression in milk fat in response to RF precedes the depression
in milk yield.
Abstract: Performance Measurement is still a difficult task for forwarding companies. This is caused on the one hand by missing resources and on the other hand by missing tools. The research project “Management Information System for Logistics Service Providers" aims for closing the gap between needed and disposable solutions. Core of the project is the development
Abstract: Six Sigma is a well known discipline that reduces
variation using complex statistical tools and the DMAIC model. By
integrating Goldratts-s Theory of Constraints, the Five Focusing
Points and System Thinking tools, Six Sigma projects can be selected
where it can cause more impact in the company. This research
defines an integrated model of six sigma and constraint management
that shows a step-by-step guide using the original methodologies
from each discipline and is evaluated in a case study from the
production line of a Automobile engine monoblock V8, resulting in
an increase in the line capacity from 18.7 pieces per hour to 22.4
pieces per hour, a reduction of 60% of Work-In-Process and a
variation decrease of 0.73%.
Abstract: In this contribution, the use of a new genetic operator is proposed. The main advantage of using this operator is that it is able to assist the evolution procedure to converge faster towards the optimal solution of a problem. This new genetic operator is called ''intuition'' operator. Generally speaking, one can claim that this operator is a way to include any heuristic or any other local knowledge, concerning the problem, that cannot be embedded in the fitness function. Simulation results show that the use of this operator increases significantly the performance of the classic Genetic Algorithm by increasing the convergence speed of its population.
Abstract: One of the purposes of the robust method of
estimation is to reduce the influence of outliers in the data, on the
estimates. The outliers arise from gross errors or contamination from
distributions with long tails. The trimmed mean is a robust estimate.
This means that it is not sensitive to violation of distributional
assumptions of the data. It is called an adaptive estimate when the
trimming proportion is determined from the data rather than being
fixed a “priori-.
The main objective of this study is to find out the robustness
properties of the adaptive trimmed means in terms of efficiency, high
breakdown point and influence function. Specifically, it seeks to find
out the magnitude of the trimming proportion of the adaptive
trimmed mean which will yield efficient and robust estimates of the
parameter for data which follow a modified Weibull distribution with
parameter λ = 1/2 , where the trimming proportion is determined by a
ratio of two trimmed means defined as the tail length. Secondly, the
asymptotic properties of the tail length and the trimmed means are
also investigated. Finally, a comparison is made on the efficiency of
the adaptive trimmed means in terms of the standard deviation for the
trimming proportions and when these were fixed a “priori".
The asymptotic tail lengths defined as the ratio of two trimmed
means and the asymptotic variances were computed by using the
formulas derived. While the values of the standard deviations for the
derived tail lengths for data of size 40 simulated from a Weibull
distribution were computed for 100 iterations using a computer
program written in Pascal language.
The findings of the study revealed that the tail lengths of the
Weibull distribution increase in magnitudes as the trimming
proportions increase, the measure of the tail length and the adaptive
trimmed mean are asymptotically independent as the number of
observations n becomes very large or approaching infinity, the tail
length is asymptotically distributed as the ratio of two independent
normal random variables, and the asymptotic variances decrease as
the trimming proportions increase. The simulation study revealed
empirically that the standard error of the adaptive trimmed mean
using the ratio of tail lengths is relatively smaller for different values
of trimming proportions than its counterpart when the trimming
proportions were fixed a 'priori'.
Abstract: The polyfunctional and highly reactive bio-polymer,
the chitosan was first regioselectively converted into dialkylated
chitosan using dimsyl anionic solution(NaH in DMSO) and
bromodecane after protecting amino groups by phthalic anhydride.
The dibenzo-18-crown-6-ether, on the other hand, was converted into
its carbonyl derivatives via Duff reaction prior to incorporate into
chitosan by Schiff base formation. Thus formed diformylated
dibenzo-18-crown-6-ether was condensed with lipophilic chitosan to
prepare the novel solvent extraction reagent. The products were
characterized mainly by IR and 1H-NMR. Hence, the multidentate
crown ether-embedded polyfunctional bio-material was tested for
extraction of Pd(II) and Pt(IV) in aqueous solution.
Abstract: Negation is useful in the majority of the real world applications. However, its introduction leads to semantic and canonical problems. We propose in this paper an approach based on stratification to deal with negation problems. This approach is based on an extension of predicates nets. It is characterized with two main contributions. The first concerns the management of the whole class of stratified programs. The second contribution is related to usual operations optimizations on stratified programs (maximal stratification, incremental updates ...).
Abstract: When earthquakes strike the city it results in great loss of lives. The present paper talks about a new innovative design system (MegEifel) for buildings which has a mechanism to mitigate deaths in case any earthquake strikes the city. If buildings will be designed according to MegEifel design then the occupants of the building will be safe even when they are in sleep or are doing day wise activities during the time earthquake strikes. The core structure is suggested to be designed on the principle that more deep the foundations are, the harder it is to uproot the structure. The buildings will have an Eifel rod dug deep into earth which will help save lives in tall buildings when earthquake strikes. This design takes a leverage of protective shells to save lives.
Abstract: Network coding has recently attracted attention as an efficient technique in multicast/broadcast services. The problem of finding the optimal network coding mechanism maximizing the bandwidth efficiency is hard to solve and hard to approximate. Lots of network coding-based schemes have been suggested in the literature to improve the bandwidth efficiency, especially network coding-based automatic repeat request (NCARQ) schemes. However, existing schemes have several limitations which cause the performance degradation in resource limited systems. To improve the performance in resource limited systems, we propose NCARQ with overlapping selection (OS-NCARQ) scheme. The advantages of OS-NCARQ scheme over the traditional ARQ scheme and existing NCARQ schemes are shown through the analysis and simulations.
Abstract: This work involved the use of phytoremediation to
remediate an aged soil contaminated with polychlorinated biphenyls
(PCBs). At microcosm scale, tests were prepared using soil samples
that have been collected in an industrial area with a total PCBs
concentration of about 250 μg kg-1. Medicago sativa and Lolium
italicum were the species selected in this study that is used as
“feasibility test" for full scale remediation. The experiment was
carried out with the addition of a mixture of randomly methylatedbeta-
cyclodextrins (RAMEB). At the end of the experiment analysis
of soil samples showed that in general the presence of plants has led
to a higher degradation of most congeners with respect to not
vegetated soil. The two plant species efficiencies were comparable
and improved by RAMEB addition with a final reduction of total
PCBs near to 50%. With increasing the chlorination of the congeners
the removal percentage of PCBs progressively decreased.