Abstract: Planning the transition period for the adoption of
alternative fuel-technology powertrains is a challenging task that
requires sophisticated analysis tools. In this study, a system dynamic
approach was applied to analyze the bi-directional interaction
between the development of the refueling station network and vehicle
sales. Besides, the developed model was used to estimate the
transition cost to reach a predefined target (share of alternative fuel
vehicles) in different scenarios. Several scenarios have been analyzed
to investigate the effectiveness and cost of incentives on the initial
price of vehicles, and on the evolution of fuel and refueling stations.
Obtained results show that a combined set of incentives will be more
effective than just a single specific type of incentives.
Abstract: Particle Swarm Optimization (PSO) with elite PSO
parameters has been developed for power flow analysis under
practical constrained situations. Multiple solutions of the power flow
problem are useful in voltage stability assessment of power system.
A method of determination of multiple power flow solutions is
presented using a hybrid of Particle Swarm Optimization (PSO) and
local search technique. The unique and innovative learning factors of
the PSO algorithm are formulated depending upon the node power
mismatch values to be highly adaptive with the power flow problems.
The local search is applied on the pbest solution obtained by the PSO
algorithm in each iteration. The proposed algorithm performs reliably
and provides multiple solutions when applied on standard and illconditioned
systems. The test results show that the performances of
the proposed algorithm under critical conditions are better than the
conventional methods.
Abstract: The line start permanent magnet motor (LSPMM)
combines a permanent magnet rotor for a better motor efficiency
during synchronous running with an induction motor squirrel cage
rotor to permit the motor starting by direct coupling to power source.
In this paper effect of the rotor structure on a line start synchronous
permanent magnet motor (LSPMM) is analyzed. LSPMM motor with
three different structures for rotor is designed by using RMxprt
software; efficiency and line current of LSPMM motor for different
structures in full-load condition have been presented. The results
indicate that with correct choosing of rotor structure, maximum
efficiency can be found.
Abstract: Structural behavior of ring stiffened thick walled
cylinders made of functionally graded materials (FGMs) is
investigated in this paper. Functionally graded materials are inhomogeneous composites which are usually made from a mixture
of metal and ceramic. The gradient compositional variation of the
constituents from one surface to the other provides an elegant solution to the problem of high transverse shear stresses that are
induced when two dissimilar materials with large differences in material properties are bonded. FGM formation of the cylinder is
modeled by power-law exponent and the variation of characteristics is supposed to be in radial direction.
A finite element formulation is derived for the analysis. According to the property variation of the constituent materials in the radial
direction of the wall, it is not convenient to use conventional elements to model and analyze the structure of the stiffened FGM
cylinders. In this paper a new cylindrical super-element is used to model the finite element formulation and analyze the static and
modal behavior of stiffened FGM thick walled cylinders. By using
this super-element the number of elements, which are needed for
modeling, will reduce significantly and the process time is less in comparison with conventional finite element formulations. Results for static and modal analysis are evaluated and verified by
comparison to finite element formulation with conventional
elements. Comparison indicates a good conformity between results.
Abstract: Inverse kinematics analysis plays an important role in developing a robot manipulator. But it is not too easy to derive the inverse kinematic equation of a robot manipulator especially robot manipulator which has numerous degree of freedom. This paper describes an application of Artificial Neural Network for modeling the inverse kinematics equation of a robot manipulator. In this case, the robot has three degree of freedoms and the robot was implemented for drilling a printed circuit board. The artificial neural network architecture used for modeling is a multilayer perceptron networks with steepest descent backpropagation training algorithm. The designed artificial neural network has 2 inputs, 2 outputs and varies in number of hidden layer. Experiments were done in variation of number of hidden layer and learning rate. Experimental results show that the best architecture of artificial neural network used for modeling inverse kinematics of is multilayer perceptron with 1 hidden layer and 38 neurons per hidden layer. This network resulted a RMSE value of 0.01474.
Abstract: This study aimed to detect and to identify the main
strains of airborne microorganisms present in the Shanghai Metro
system. Samples were collected using agar plates exposed to the air
and microorganisms were identified using catalase, plasma coagulase
and hymolytic analysis. The results show that the concentration of
mildew present within a newly opened metro line was significantly
higher than for other lines. Differences among underground and
elevated stations can be attributed to differences in passenger flow and
the environment surrounding the stations. Additionally, the
investigation indicated that bacteria reached maximum levels at
different times on weekdays and weekends. The bacteria in the Metro
stations were identified as primarily Gram positive, consisting mainly
of coagulase-negative staphylococcus strains (CNS).
Abstract: Recently, many existing partially blind signature scheme based on a single hard problem such as factoring, discrete logarithm, residuosity or elliptic curve discrete logarithm problems. However sooner or later these systems will become broken and vulnerable, if the factoring or discrete logarithms problems are cracked. This paper proposes a secured partially blind signature scheme based on factoring (FAC) problem and elliptic curve discrete logarithms (ECDL) problem. As the proposed scheme is focused on factoring and ECDLP hard problems, it has a solid structure and will totally leave the intruder bemused because it is very unlikely to solve the two hard problems simultaneously. In order to assess the security level of the proposed scheme a performance analysis has been conducted. Results have proved that the proposed scheme effectively deals with the partial blindness, randomization, unlinkability and unforgeability properties. Apart from this we have also investigated the computation cost of the proposed scheme. The new proposed scheme is robust and it is difficult for the malevolent attacks to break our scheme.
Abstract: This paper presents the experimental results on
artificial ageing test of 22 kV XLPE cable for distribution system
application in Thailand. XLPE insulating material of 22 kV cable
was sliced to 60-70 μm in thick and was subjected to ac high voltage
at 23
Ôùª
C, 60
Ôùª
C and 75
Ôùª
C. Testing voltage was constantly applied to
the specimen until breakdown. Breakdown voltage and time to
breakdown were used to evaluate life time of insulating material.
Furthermore, the physical model by J. P. Crine for predicts life time
of XLPE insulating material was adopted as life time model and was
calculated in order to compare the experimental results. Acceptable
life time results were obtained from Crine-s model comparing with
the experimental result. In addition, fourier transform infrared
spectroscopy (FTIR) for chemical analysis and scanning electron
microscope (SEM) for physical analysis were conducted on tested
specimens.
Abstract: Recently, it has been suggested that thought control strategies aimed at controlling unwanted thoughts may be used to cope with paranoid thoughts in both clinical and nonclinical samples. The current study aims to examine the type of thought control strategies that were associated with the frequency of paranoid thoughts in nonclinical samples. A total of 159 Japanese undergraduate students completed the two scales–the Paranoia Checklist and the Thought Control Questionnaire. A hierarchical multiple regression analysis demonstrated that worry-based control strategies were associated with paranoid thoughts, whereas distraction- and social-based control strategies were inversely associated with paranoid thoughts. Our findings suggest that in a nonclinical population, worry-based strategies may be especially maladaptive, whereas distraction- and social-based strategies may be adaptive to paranoid thoughts.
Abstract: The purpose of this study is to identify ideal urban
design elements of waterfronts and to analyze the differences in users-
cognition among these elements. This study follows three steps as
following: first is identifying the urban design elements of waterfronts
from literature review and second is evaluating intended users-
cognition of urban design elements in urban waterfronts. Lastly, third
is analyzing the users- cognition differences. As the result, evaluations
of waterfront areas by users show similar features that non-waterfront
urban design elements contain the highest degree of importance. This
indicates the difference of users- cognition has dimensions of
frequency and distance, and demonstrates differences in the aspect of
importance than of satisfaction. Multi-Dimensional Scaling Method
verifies differences among their cognition. This study provides
elements to increase satisfaction of users from differences of their
cognition on design elements for waterfronts. It also suggests
implications on elements when waterfronts are built.
Abstract: Average current analysis checking the impact of
current flow is very important to guarantee the reliability of
semiconductor systems. As semiconductor process technologies
improve, the coupling capacitance often become bigger than self
capacitances. In this paper, we propose an analytic technique for
analyzing average current on interconnects in multi-conductor
structures. The proposed technique has shown to yield the acceptable
errors compared to HSPICE results while providing computational
efficiency.
Abstract: The spiral angle of the elementary cellulose fibril in
the wood cell wall, often called microfibril angle, (MFA). Microfibril
angle in hardwood is one of the key determinants of solid timber
performance due to its strong influence on the stiffness, strength,
shrinkage, swelling, thermal-dynamics mechanical properties and
dimensional stability of wood. Variation of MFA (degree) in the S2
layer of the cell walls among Acacia mangium trees was determined
using small-angle X-ray scattering (SAXS). The length and
orientation of the microfibrils of the cell walls in the irradiated
volume of the thin samples are measured using SAXS and optical
microscope for 3D surface measurement. The undetermined
parameters in the analysis are the MFA, (M) and the standard
deviation (σФ) of the intensity distribution arising from the wandering
of the fibril orientation about the mean value. Nine separate pairs of
values are determined for nine different values of the angle of the
incidence of the X-ray beam relative to the normal to the radial
direction in the sample. The results show good agreement. The
curve distribution of scattered intensity for the real cell wall structure
is compared with that calculated with that assembly of rectangular
cells with the same ratio of transverse to radial cell wall length. It is
demonstrated that for β = 45°, the peaks in the curve intensity
distribution for the real and the rectangular cells coincide. If this
peak position is Ф45, then the MFA can be determined from the
relation M = tan-1 (tan Ф45 / cos 45°), which is precise for rectangular
cells. It was found that 92.93% of the variation of MFA can be
attributed to the distance from pith to bark. Here we shall present our
results of the MFA in the cell wall with respect to its shape, structure
and the distance from pith to park as an important fast check and yet
accurate towards the quality of wood, its uses and application.
Abstract: e-Government structures permits the government to operate in a more transparent and accountable manner of which it increases the power of the individual in relation to that of the government. This paper identifies the factors that determine customer-s attitude towards e-Government services using a theoretical model based on the Technology Acceptance Model. Data relating to the constructs were collected from 200 respondents. The research model was tested using Structural Equation Modeling (SEM) techniques via the Analysis of Moment Structure (AMOS 16) computer software. SEM is a comprehensive approach to testing hypotheses about relations among observed and latent variables. The proposed model fits the data well. The results demonstrated that e- Government services acceptance can be explained in terms of compatibility and attitude towards e-Government services. The setup of the e-Government services will be compatible with the way users work and are more likely to adopt e-Government services owing to their familiarity with the Internet for various official, personal, and recreational uses. In addition, managerial implications for government policy makers, government agencies, and system developers are also discussed.
Abstract: By means of the extended homoclinic test approach (shortly EHTA) with the aid of a symbolic computation system such as Maple, some complexiton type solutions for the (3+1)-dimensional Jimbo-Miwa equation are presented.
Abstract: Series of tellurite glass of the system 78TeO2-10PbO-
10Li2O-(2-x)Nd2O3-xEr2O3, where x = 0.5, 1.0, 1.5 and 2.0 was
successfully been made. A study of upconversion luminescence of
the Nd3+/Er3+ co-doped tellurite glass has been carried out. From
Judd-Ofelt analysis, the experimental lifetime, exp. τ of the glass
serie are found higher in the visible region as they varies from
65.17ms to 114.63ms, whereas in the near infrared region (NIR) the
lifetime are varies from 2.133ms to 2.270ms. Meanwhile, the
emission cross section,σ results are found varies from 0.004 x 1020
cm2 to 1.007 x 1020 cm2 with respect to composition. The emission
spectra of the glass are found been contributed from Nd3+ and Er3+
ions by which nine significant transition peaks are observed. The
upconversion mechanism of the co-doped tellurite glass has been
shown in the schematic energy diagrams. In this works, it is found
that the excited state-absorption (ESA) is still dominant in the
upconversion excitation process as the upconversion excitation
mechanism of the Nd3+ excited-state levels is accomplished through a
stepwise multiphonon process. An efficient excitation energy transfer
(ET) has been observed between Nd3+ as a donor and Er3+ as the
acceptor. As a result, respective emission spectra had been observed.
Abstract: Current image-based individual human recognition
methods, such as fingerprints, face, or iris biometric modalities
generally require a cooperative subject, views from certain aspects,
and physical contact or close proximity. These methods cannot
reliably recognize non-cooperating individuals at a distance in the
real world under changing environmental conditions. Gait, which
concerns recognizing individuals by the way they walk, is a relatively
new biometric without these disadvantages. The inherent gait
characteristic of an individual makes it irreplaceable and useful in
visual surveillance.
In this paper, an efficient gait recognition system for human
identification by extracting two features namely width vector of
the binary silhouette and the MPEG-7-based region-based shape
descriptors is proposed. In the proposed method, foreground objects
i.e., human and other moving objects are extracted by estimating
background information by a Gaussian Mixture Model (GMM) and
subsequently, median filtering operation is performed for removing
noises in the background subtracted image. A moving target classification
algorithm is used to separate human being (i.e., pedestrian)
from other foreground objects (viz., vehicles). Shape and boundary
information is used in the moving target classification algorithm.
Subsequently, width vector of the outer contour of binary silhouette
and the MPEG-7 Angular Radial Transform coefficients are taken as
the feature vector. Next, the Principal Component Analysis (PCA)
is applied to the selected feature vector to reduce its dimensionality.
These extracted feature vectors are used to train an Hidden Markov
Model (HMM) for identification of some individuals. The proposed
system is evaluated using some gait sequences and the experimental
results show the efficacy of the proposed algorithm.
Abstract: Rice, which is the staple food in Sierra Leone, is
consumed on a daily basis. It is the most imperative food crop
extensively grown by farmers across all ecologies in the country.
Though much attention is now given to rice grain production through
the small holder commercialization programme (SHCP), however, no
attention has been given in investigating the limitations faced by rice
producers. This paper will contribute to attempts to overcome the
development challenges caused by food insecurity. The objective of
this paper is thus, to analysis the relationship between rice production
and the domestic retail price of rice. The study employed a log linear
model in which, the quantity of rice produced is the dependent
variable, quantity of rice imported, price of imported rice and price of
domestic rice as explanatory variables. Findings showed that, locally
produced rice is even more expensive than the imported rice per ton,
and almost all the inhabitants in the capital city which hosts about
65% of the entire population of the country favor imported rice, as it
is free from stones with other impurities. On the other hand, to
control price and simultaneously increase rice production, the
government should purchase the rice from the farmers and then sell to private retailers.
Abstract: Cancers could normally be marked by a number of
differentially expressed genes which show enormous potential as
biomarkers for a certain disease. Recent years, cancer classification
based on the investigation of gene expression profiles derived by
high-throughput microarrays has widely been used. The selection of
discriminative genes is, therefore, an essential preprocess step in
carcinogenesis studies. In this paper, we have proposed a novel gene
selector using information-theoretic measures for biological
discovery. This multivariate filter is a four-stage framework through
the analyses of feature relevance, feature interdependence, feature
redundancy-dependence and subset rankings, and having been
examined on the colon cancer data set. Our experimental result show
that the proposed method outperformed other information theorem
based filters in all aspect of classification errors and classification
performance.
Abstract: The common bean is the most important grain legume for direct human consumption in the world and BCMV is one of the world's most serious bean diseases that can reduce yield and quality of harvested product. To determine the best tolerance index to BCMV and recognize tolerant genotypes, 2 experiments were conducted in field conditions. Twenty five common bean genotypes were sown in 2 separate RCB design with 3 replications under contamination and non-contamination conditions. On the basis of the results of indices correlations GMP, MP and HARM were determined as the most suitable tolerance indices. The results of principle components analysis indicated 2 first components totally explained 98.52% of variations among data. The first and second components were named potential yield and stress susceptible respectively. Based on the results of BCMV tolerance indices assessment and biplot analysis WA8563-4, WA8563-2 and Cardinal were the genotypes that exhibited potential seed yield under contamination and noncontamination conditions.
Abstract: The paper presents the optimization problem for the
multi-element synthetic transmit aperture method (MSTA) in
ultrasound imaging applications. The optimal choice of the transmit
aperture size is performed as a trade-off between the lateral
resolution, penetration depth and the frame rate. Results of the
analysis obtained by a developed optimization algorithm are
presented. Maximum penetration depth and the best lateral resolution
at given depths are chosen as the optimization criteria. The
optimization algorithm was tested using synthetic aperture data of
point reflectors simulated by Filed II program for Matlab® for the
case of 5MHz 128-element linear transducer array with 0.48 mm
pitch are presented. The visualization of experimentally obtained
synthetic aperture data of a tissue mimicking phantom and in vitro
measurements of the beef liver are also shown. The data were
obtained using the SonixTOUCH Research systemequipped with a
linear 4MHz 128 element transducerwith 0.3 mm element pitch, 0.28
mm element width and 70% fractional bandwidth was excited by one
sine cycle pulse burst of transducer's center frequency.