Abstract: We have been grouping and developing various kinds
of practical, promising sensing applied systems concerning
agricultural advancement and technical tradition (guidance). These
include advanced devices to secure real-time data related to worker
motion, and we analyze by methods of various advanced statistics and
human dynamics (e.g. primary component analysis, Ward system
based cluster analysis, and mapping). What is more, we have been
considering worker daily health and safety issues. Targeted fields are
mainly common farms, meadows, and gardens. After then, we
observed and discussed time-line style, changing data. And, we made
some suggestions. The entire plan makes it possible to improve both
the aforementioned applied systems and farms.
Abstract: Machining of hard materials is a recent technology for
direct production of work-pieces. The primary challenge in
machining these materials is selection of cutting tool inserts which
facilitates an extended tool life and high-precision machining of the
component. These materials are widely for making precision parts for
the aerospace industry. Nickel-based alloys are typically used in
extreme environment applications where a combination of strength,
corrosion resistance and oxidation resistance material characteristics
are required. The present paper reports the theoretical and
experimental investigations carried out to understand the influence of
machining parameters on the response parameters. Considering the
basic machining parameters (speed, feed and depth of cut) a study has
been conducted to observe their influence on material removal rate,
surface roughness, cutting forces and corresponding tool wear.
Experiments are designed and conducted with the help of Central
Composite Rotatable Design technique. The results reveals that for a
given range of process parameters, material removal rate is favorable
for higher depths of cut and low feed rate for cutting forces. Low feed
rates and high values of rotational speeds are suitable for better finish
and higher tool life.
Abstract: This technical contribution treats of a novel approach
to condition-oriented maintenance as elaborated by Collaborative
Research Centre 653 at the Leibniz University in Hanover. The
objective resides in the targeted analysis of information about a
component's lifecycle for maintenance purposes. The information in
question is collected by means of the Collaborative Research Centre's
innovative technologies. This enables preventive maintenance of
components on the basis of their condition. This contribution initially
explains condition-oriented maintenance, before introducing the
Collaborative Research Centre and finally presenting the
methodology for analyzing the information. The current state of
development is described and an outlook provided for expanding the
methodology.
Abstract: The development of active and stable catalysts
without noble metals for low temperature oxidation of exhaust gases
remains a significant challenge. The purpose of this study is to
determine the influence of the preparation method on the catalytic
activity of the supported copper-manganese mixed oxides in terms of
VOCs oxidation. The catalysts were prepared by impregnation of γ-
Al2O3 with copper and manganese nitrates and acetates and the
possibilities for CO, CH3OH and dimethyl ether (DME) oxidation
were evaluated using continuous flow equipment with a four-channel
isothermal stainless steel reactor. Effect of the support, Cu/Mn mole
ratio, heat treatment of the precursor and active component loading
were investigated. Highly active alumina supported Cu-Mn catalysts
for CO and VOCs oxidation were synthesized. The effect of
preparation conditions on the activity behavior of the catalysts was
discussed.
The synergetic interaction between copper and manganese species
increases the activity for complete oxidation over mixed catalysts.
Type of support, calcination temperature and active component
loading along with catalyst composition are important factors,
determining catalytic activity. Cu/Mn molar ratio of 1:5, heat
treatment at 450oC and 20 % active component loading are the best
compromise for production of active catalyst for simultaneous
combustion of CO, CH3OH and DME.
Abstract: The paper tackles the topic of determining the cost of
innovation in software development projects. Innovation can be
achieved either in a planned or unplanned manner. The paper
approaches the scenarios were innovation is planned for. As a starting
point an innovative software development project is analyzed. The
project is depicted step by step as it was implemented, from inception
to delivery. Costs that are proprietary to innovation in software
development are isolated based on the author’s personal experience
in managing the above mentioned project. Innovation costs
components identified by the author are then validated using open
discussions with software development professionals and projects
managers on LinkedIn groups. In order to receive relevant feedback
only groups that focus on software development and innovation
management are targeted. Additional innovation cost components
suggested by software development professionals and projects
managers are also considered. Based on the identified cost
components an indicator is built. The indicator is meant to formalize
the process of determining the cost of innovation in a software
development project. The indicator aggregates all the innovation cost
components that are identified in the research process. The process of
calculating each cost component is also described. Conclusions are
formulated and new related research topics are submitted for debate.
Abstract: In this paper, we investigate the effect of friendly
jamming power allocation strategies on the achievable average
secrecy rate over a bank of parallel fading wiretap channels.
We investigate the achievable average secrecy rate in parallel
fading wiretap channels subject to Rayleigh and Rician fading.
The achievable average secrecy rate, due to the presence of a
line-of-sight component in the jammer channel is also evaluated.
Moreover, we study the detrimental effect of correlation across the
parallel sub-channels, and evaluate the corresponding decrease in the
achievable average secrecy rate for the various fading configurations.
We also investigate the tradeoff between the transmission power
and the jamming power for a fixed total power budget. Our
results, which are applicable to current orthogonal frequency division
multiplexing (OFDM) communications systems, shed further light on
the achievable average secrecy rates over a bank of parallel fading
channels in the presence of friendly jammers.
Abstract: This article discusses ways to implement a
differentiated approach to developing academic motivation for
mathematical studies which relies on defining the primary structural
characteristics of motivation. The following characteristics are
considered: features of realization of cognitive activity, meaningmaking
characteristics, level of generalization and consistency of
knowledge acquired by personal experience. The assessment of the
present level of individual student understanding of each component
of academic motivation is the basis for defining the relevant
educational strategy for its further development.
Abstract: Object-oriented modeling is spreading in current
simulation of physiological systems through the use of the individual
components of the model and its interconnections to define the
underlying dynamic equations. In this paper we describe the use of
both the SIMSCAPE and MODELICA simulation environments in
the object-oriented modeling of the closed loop cardiovascular
system. The performance of the controlled system was analyzed by
simulation in light of the existing hypothesis and validation tests
previously performed with physiological data. The described
approach represents a valuable tool in the teaching of physiology for
graduate medical students.
Abstract: The capability of CNC gantry milling machines in
manufacturing long components has caused the expanded use of such
machines. On the other hand, the machines’ gantry rigidity can
reduce under severe loads or vibration during operation. Indeed, the
quality of machining is dependent on the machine’s dynamic
behavior throughout the operating process. For this reason, these
types of machines have always been used widely and are not
efficient. Therefore, they can usually be employed for rough
machining and may not produce adequate surface finishing. In this
paper, a CNC gantry milling machine with the potential to produce
good surface finish has been designed and analyzed. The lowest
natural frequency of this machine is 202 Hz corresponding to 12000
rpm at all motion amplitudes with a full range of suitable frequency
responses. Meanwhile, the maximum deformation under dead loads
for the gantry machine is 0.565*m, indicating that this machine tool
is capable of producing higher product quality.
Abstract: The purpose of the present work was to develop an
innovative food product with nutritional properties as well as
appealing organoleptic qualities. The product, a jam, was prepared
with the beans’ cooking water combined with fresh apple or carrot,
without the addition of any conservatives. Three different jams were
produced: bean and carrot, bean and apple and bean, apple and
cinnamon. The developed products underwent a sensorial analysis
that revealed that the bean, apple and cinnamon jam was globally
better accepted. However, with this study, the consumers determined
that the bean and carrot jam had the most attractive color and the
bean and apple jam the better consistency. Additionally, it was
possible to analyze the jams for their chemical components, namely
fat, fiber, protein, sugars and antioxidant activity. The obtained
results showed that the bean and carrot jam had the highest lipid
content, while the bean, apple and cinnamon jam had the highest
fiber content, when compared to the other two jams. Regarding the
sugar content, both jams with apple revealed similar sugar values,
which were higher than the sugar content of the bean and carrot jam.
The antioxidant activity was on average 10 mg TE/g.
Abstract: Power Regeneration in Refrigeration Plant concept
has been analyzed and has been shown to be capable of saving about
25% power in Cryogenic Plants with the Power Regeneration System
(PRS) running under nominal conditions. The innovative component
Compressor Expander Group (CEG) based on turbomachinery has
been designed and built modifying CETT compressor and expander,
both selected for optimum plant performance. Experiments have
shown the good response of the turbomachines to run with R404a as
working fluid. Power saving up to 12% under PRS derated conditions
(50% loading) has been demonstrated. Such experiments allowed
predicting a power saving up to 25% under CEG full load.
Abstract: This study aimed to identify the alignment of
understanding and assessment practices among secondary school
teachers. The study was carried out using quantitative descriptive
study. The sample consisted of 164 teachers who taught Form 1 and 2
from 11 secondary schools in the district of North Kinta, Perak,
Malaysia. Data were obtained from 164 respondents who answered
Expectation Alignment Understanding and Practices of School
Assessment (PEKDAPS) questionnaire. The data were analysed
using SPSS 17.0+. The Cronbach’s alpha value obtained through
PEKDAPS questionnaire pilot study was 0.86. The results showed
that teachers' performance in PEKDAPS based on the mean value
was less than 3, which means that perfect alignment does not occur
between the understanding and practices of school assessment. Two
major PEKDAPS sub-constructs of articulation across grade and age
and usability of the system were higher than the moderate alignment
of the understanding and practices of school assessment (Min=2.0).
The content focused of PEKDAPs sub-constructs which showed
lower than the moderate alignment of the understanding and practices
of school assessment (Min=2.0). Another two PEKDAPS subconstructs
of transparency and fairness and the pedagogical
implications showed moderate alignment (2.0). The implications of
the study is that teachers need to fully understand the importance of
alignment among components of assessment, learning and teaching
and learning objectives as strategies to achieve quality assessment
process.
Abstract: This paper discusses the design and analysis of a
hybrid PV-Fuel cell energy system destined to power a DC load. The
system is composed of a photovoltaic array, a fuel cell, an
electrolyzer and a hydrogen tank. HOMER software is used in this
study to calculate the optimum capacities of the power system
components that their combination allows an efficient use of solar
resource to cover the hourly load needs. The optimal system sizing
allows establishing the right balance between the daily electrical
energy produced by the power system and the daily electrical energy
consumed by the DC load using a 28 KW PV array, a 7.5 KW fuel
cell, a 40KW electrolyzer and a 270 Kg hydrogen tank. The variation
of powers involved into the DC bus of the hybrid PV-fuel cell system
has been computed and analyzed for each hour over one year: the
output powers of the PV array and the fuel cell, the input power of
the elctrolyzer system and the DC primary load. Equally, the annual
variation of stored hydrogen produced by the electrolyzer has been
assessed. The PV array contributes in the power system with 82%
whereas the fuel cell produces 18%. 38% of the total energy
consumption belongs to the DC primary load while the rest goes to
the electrolyzer.
Abstract: Skin aging is a slow multifactorial process influenced
by both internal as well as external factors. Ultra-violet radiations
(UV), diet, smoking and personal habits are the most common
environmental factors that affect skin aging. Fat contents and fibrous
proteins as collagen and elastin are core internal structural
components. The direct influence of UV on elastin integrity and
health is central on aging of skin especially by time. The deposition
of abnormal elastic material is a major marker in a photo-aged skin.
Searching for compounds that may protect against cutaneous photodamage
is exceedingly valued. Retinoids and alpha hydroxy acids
have been endorsed by some researchers as possible candidates for
protecting and or repairing the effect of UV damaged skin. For
consolidating a better system of anti- and protective effects of such
anti-aging agents, we evaluated the combinatory effects of various
dosages of lactic acid and retinol on the dermal fibroblast’s elastin
levels exposed to UV. The UV exposed cells showed significant
reduction in the elastin levels. A combination of drugs with a higher
concentration of lactic acid (30 -35 mM) and a lower concentration of
retinol (10-15mg/mL) showed to work better in maintaining elastin
concentration in UV exposed cells. We assume this preservation
could be the result of increased tropo-elastin gene expression
stimulated by retinol whereas lactic acid probably repaired the UV
irradiated damage by enhancing the amount and integrity of the
elastin fibers.
Abstract: This paper presents powerful techniques for the
development of a new monitoring method based on multi-scale
entropy (MSE) in order to characterize the behaviour of the
concentrations of different gases present in the synthesis of Ammonia
and soft-sensor based on Principal Component Analysis (PCA).
Abstract: This paper presents two techniques, local feature
extraction using image spectrum and low frequency spectrum
modelling using GMM to capture the underlying statistical
information to improve the performance of face recognition
system. Local spectrum features are extracted using overlap sub
block window that are mapped on the face image. For each of this
block, spatial domain is transformed to frequency domain using
DFT. A low frequency coefficient is preserved by discarding high
frequency coefficients by applying rectangular mask on the
spectrum of the facial image. Low frequency information is non-
Gaussian in the feature space and by using combination of several
Gaussian functions that has different statistical properties, the best
feature representation can be modelled using probability density
function. The recognition process is performed using maximum
likelihood value computed using pre-calculated GMM components.
The method is tested using FERET datasets and is able to achieved
92% recognition rates.
Abstract: Today, the pollution due to non-degradable material
such as plastics, has led to studies about the development of
environmental-friendly material. Because of biodegradability
obtained from natural sources, polylactid acid (PLA) and ijuk fiber
are interesting to modify into a composite. This material is also
expected to reduce the impact of environmental pollution. Surface
modification of ijuk fiber through alkalinization with 0.25 M NaOH
solution for 30 minutes was aimed to enhance its compatibility to
PLA, in order to improve properties of the composite such as the
mechanical properties. Alkalinization of the ijuk fibers annihilates
some surface components such as lignin, wax and hemicelloluse, so
the pore on the surface clearly appeared, decreasing of the density
and diameter of the ijuk fibers. The change of the ijuk fiber properties
leads to increase the mechanical properties of PLA composites
reinforced the ijuk fibers through strengthening of the mechanical
interlocking with the PLA matrix. An addition to enhance the
distribution of the fibers in the PLA matrix, the stirring during DCM
solvent evaporation from the mixture of the ijuk fibers and the
dissolved-PLA can reduce amount of the trapped-voids and fibers
pull-out phenomena, which can decrease the mechanical properties of
the composite.
Abstract: The present work analyses different parameters of end
milling to minimize the surface roughness for AISI D2 steel. D2 Steel
is generally used for stamping or forming dies, punches, forming
rolls, knives, slitters, shear blades, tools, scrap choppers, tyre
shredders etc. Surface roughness is one of the main indices that
determines the quality of machined products and is influenced by
various cutting parameters. In machining operations, achieving
desired surface quality by optimization of machining parameters, is a
challenging job. In case of mating components the surface roughness
become more essential and is influenced by the cutting parameters,
because, these quality structures are highly correlated and are
expected to be influenced directly or indirectly by the direct effect of
process parameters or their interactive effects (i.e. on process
environment). In this work, the effects of selected process parameters
on surface roughness and subsequent setting of parameters with the
levels have been accomplished by Taguchi’s parameter design
approach. The experiments have been performed as per the
combination of levels of different process parameters suggested by
L9 orthogonal array. Experimental investigation of the end milling of
AISI D2 steel with carbide tool by varying feed, speed and depth of
cut and the surface roughness has been measured using surface
roughness tester. Analyses of variance have been performed for mean
and signal-to-noise ratio to estimate the contribution of the different
process parameters on the process.
Abstract: The aim of this paper is to select the most accurate
forecasting method for predicting the future values of the
unemployment rate in selected European countries. In order to do so,
several forecasting techniques adequate for forecasting time series
with trend component, were selected, namely: double exponential
smoothing (also known as Holt`s method) and Holt-Winters` method
which accounts for trend and seasonality. The results of the empirical
analysis showed that the optimal model for forecasting
unemployment rate in Greece was Holt-Winters` additive method. In
the case of Spain, according to MAPE, the optimal model was double
exponential smoothing model. Furthermore, for Croatia and Italy the
best forecasting model for unemployment rate was Holt-Winters`
multiplicative model, whereas in the case of Portugal the best model
to forecast unemployment rate was Double exponential smoothing
model. Our findings are in line with European Commission
unemployment rate estimates.
Abstract: In this research paper were investigated the main
regularities of a radical bromination reaction of decalin. There had
been studied the temperature effect, durations of reaction, frequency
rate of process, a ratio of initial components, type and number of the
initiator on decalin bromination degree.
There were specified optimum conditions of synthesis of a
perbromodecalin by the method of a decalin bromination. There are
developed the technological flowchart of receiving a
perbromodecalin and the mass balance of process on the first and the
subsequent loadings of components.
The results of research of antibacterial and antifungal activity of
synthesized bromoderivatives have been represented.