Abstract: The adverse effects of Clindamycin (Clind.) /
Ibuprofen (Ibu.) combination on liver, kidney, blood elements and the
significances of antioxidants (N-acetylcysteine and Zinc) against
these effects were evaluated. The study includes: Group I; control
n=30, Group II; patients on Clind.300mg/Ibu.400mg twice daily for a
week n=30, Group III; patients on Clind.300mg/Ibu.400mg+Nacetylcysteine
200mg twice daily for a week n=15 and Group IV;
patients on Clind.300mg/Ibu.400mg+Zinc50mg twice daily for a
week n=15. Serum malondialdehyde (MDA), alanine transferase
(ALT), aspartate transferase (AST), γ glutamyl transferase (GGT),
creatinine, blood urea nitrogen (BUN) were measured. Applying one
way ANOVA followed by Tuckey Kramer post test, Group II showed
significant increase in ALT, AST, GGT, BUN and decrease in Hb,
RBCs, platelets than Group I. Group III showed significant decrease
in ALT, AST, GGT, BUN than Group II. Moreover, Group IV
showed significant decrease in ALT, AST, GGT and increase in Hb,
RBCs, and platelets than Group II. Conclusively, Adding Zinc or Nacetylcysteine
buffer the oxidative stress and improve the therapeutic
outcome of Clindamycin/Ibuprofen combination.
Abstract: Among many different methods that are used for
optimizing different engineering problems mathematical (numerical)
optimization techniques are very important because they can easily
be used and are consistent with most of engineering problems. Many
studies and researches are done on stability analysis of three
dimensional (3D) slopes and the relating probable slip surfaces and
determination of factors of safety, but in most of them force
equilibrium equations, as in simplified 2D methods, are considered
only in two directions. In other words for decreasing mathematical
calculations and also for simplifying purposes the force equilibrium
equation in 3rd direction is omitted. This point is considered in just a
few numbers of previous studies and most of them have only given a
factor of safety and they haven-t made enough effort to find the most
probable slip surface. In this study shapes of the slip surfaces are
modeled, and safety factors are calculated considering the force
equilibrium equations in all three directions, and also the moment
equilibrium equation is satisfied in the slip direction, and using
nonlinear programming techniques the shape of the most probable
slip surface is determined. The model which is used in this study is a
3D model that is composed of three upper surfaces which can cover
all defined and probable slip surfaces. In this research the meshing
process is done in a way that all elements are prismatic with
quadrilateral cross sections, and the safety factor is defined on this
quadrilateral surface in the base of the element which is a part of the
whole slip surface. The method that is used in this study to find the
most probable slip surface is the non-linear programming method in
which the objective function that must get optimized is the factor of
safety that is a function of the soil properties and the coordinates of
the nodes on the probable slip surface. The main reason for using
non-linear programming method in this research is its quick
convergence to the desired responses. The final results show a good
compatibility with the previously used classical and 2D methods and
also show a reasonable convergence speed.
Abstract: Adaptive echo cancellers with two-path algorithm are
applied to avoid the false adaptation during the double-talk situation.
In the two-path algorithm, several transfer logic solutions have been
proposed to control the filter update. This paper presents an improved
transfer logic solution. It improves the convergence speed of the
two-path algorithm, and allows the reduction of the memory elements
and computational complexity. Results of simulations show the
improved performance of the proposed solution.
Abstract: Paper is dealing with vulnerability concerning elements of hydrological structures and elements of technological equipments which are acceptable for groundwater resources. The vulnerability assessment stems from the application of the register of hazards and a potential threat to individual water source elements within each type of hazard. The proposed procedure is pattern for assessing the risks of disturbance, damage, or destruction of water source by the identified natural or technological hazards and consequently for classification of these risks in relation to emergency water supply. Using of this procedure was verified on selected groundwater resource in particular region, which seems to be as potentially useful for crisis planning system.
Abstract: Quantitative researching on the degree of incidence between the logistics industry and relevant macroscopic system elements is the basis of reasonable and scientific policy on industrial development. In the light of the macro-level, the logistics industry system is consisted of multiple macroscopic agents such as macro-economic, infrastructure, social environment, market demanding, the traditional industry, industry life cycle, policy , system and so on. This paper studies the grey incidence among the macroscopic agents in the logistics industry system. It is demonstrated that the releasing of the logistics services from the logistics outsourcing enterprises determines the growth of the logistics size. Although the information and communication technology is able to promote the formation of the modern logistics industry to some extent, the development of the modern logistics industry depends more on the development of national economy and the investment in the capital assets of the logistics industry.
Abstract: In this study rack systems that are structural storage
units of warehouses have been analyzed as structural with Finite
Element Method (FEA). Each cell of discussed rack system storages
pallets which have from 800 kg to 1000 kg weights and
0.80x1.15x1.50 m dimensions. Under this load, total deformations
and equivalent stresses of structural elements and principal stresses,
tensile stresses and shear stresses of connection elements have been
analyzed. The results of analyses have been evaluated according to
resistance limits of structural and connection elements. Obtained
results have been presented as visual and magnitude.
Abstract: Studies have shown that the SnAgCu solder family has been widely used as a replacement for conventional Sn-Pb solders. An attractive approach is by introducing alloying additives (rare earth elements (RE), Zn, Co, Fe, Ni, Sb) into the SnAgCu solder, which helps in refining the microstructure also improving the mechanical and wetting properties of the solder. The present work focuses on the effect of additions of 0.5% Ce and Fe into Sn-3.0Ag-0.5Cu solder, in attempt to reduce the intermetallic compound (IMC) growth and reflow properties of the solder on Cu and Ni (P) surface finish, as well as effects thermal aging on the formation of intermetallic compound (IMC) on different surface finish. Excessive intermetallic compound growth may effect the interface and solder joint due to the brittle nature of the intermetallic compounds. Thus, by introducing alloying elements, IMC layer thickness can be decrease, resulting in better joint and solder reliability.
Abstract: Chaiyaphum Starch Co. Ltd. is one of many starch
manufacturers that has introduced machinery to aid in manufacturing.
Even though machinery has replaced many elements and is now a
significant part in manufacturing processes, problems that must be
solved with respect to current process flow to increase efficiency still
exist. The paper-s aim is to increase productivity while maintaining
desired quality of starch, by redesigning the flipping machine-s
mechanical control system which has grossly low functional lifetime.
Such problems stem from the mechanical control system-s bearings,
as fluids and humidity can access into said bearing directly, in
tandem with vibrations from the machine-s function itself. The wheel
which is used to sense starch thickness occasionally falls from its
shaft, due to high speed rotation during operation, while the shaft
may bend from impact when processing dried bread. Redesigning its
mechanical control system has increased its efficiency, allowing
quality thickness measurement while increasing functional lifetime
an additional 62 days.
Abstract: Based on 276 responses from academic staff in an
evaluation of an online learning environment (OLE), this paper
identifies those elements of the OLE that were most used and valued
by staff, those elements of the OLE that staff most wanted to see
improved, and those factors that most contributed to staff perceptions
that the use of the OLE enhanced their teaching. The most used and
valued elements were core functions, including accessing unit
information, accessing lecture/tutorial/lab notes, and reading online
discussions. The elements identified as most needing attention related
to online assessment: submitting assignments, managing assessment
items, and receiving feedback on assignments. Staff felt that using the
OLE enhanced their teaching when they were satisfied that their
students were able to access and use their learning materials, and
when they were satisfied with the professional development they
received and were confident with their ability to teach with the OLE.
Abstract: Consumer behaviour analysis represents an important
field of study in marketing. Particularly strategy development for
marketing and communications will be more focused and effective
when marketers have an understanding of the motivations, behaviour
and psychology of consumers. While materialism has been found to
be one of the important elements in consumer behaviour, compulsive
consumption represents another aspect that has recently attracted
more attention. This is because of the growing prevalence of
dysfunctional buying that has raised concern in consumer societies.
Present studies and analyses on origins and motivations of
compulsive buying have mainly focused on either individual factors
or groups of related factors and hence a need for a holistic view
exists. This paper provides a comprehensive perspective on
compulsive consumption and establishes relevant propositions
keeping the family life cycle stages as a reference for the incidence of
chronic consumer states and their influence on compulsive
consumption.
Abstract: The classification of the protein structure is commonly
not performed for the whole protein but for structural domains, i.e.,
compact functional units preserved during evolution. Hence, a first
step to a protein structure classification is the separation of the
protein into its domains. We approach the problem of protein domain
identification by proposing a novel graph theoretical algorithm. We
represent the protein structure as an undirected, unweighted and
unlabeled graph which nodes correspond the secondary structure
elements of the protein. This graph is call the protein graph. The
domains are then identified as partitions of the graph corresponding
to vertices sets obtained by the maximization of an objective function,
which mutually maximizes the cycle distributions found in the
partitions of the graph. Our algorithm does not utilize any other kind
of information besides the cycle-distribution to find the partitions. If
a partition is found, the algorithm is iteratively applied to each of
the resulting subgraphs. As stop criterion, we calculate numerically
a significance level which indicates the stability of the predicted
partition against a random rewiring of the protein graph. Hence,
our algorithm terminates automatically its iterative application. We
present results for one and two domain proteins and compare our
results with the manually assigned domains by the SCOP database
and differences are discussed.
Abstract: Safety Health and Environment Code of Practice (SHE
COP) was developed to help road transportation operators to manage
its operation in a systematic and safe manner. A study was conducted
to determine the effectiveness of SHE COP implementation during
non-OPS period. The objective of the study is to evaluate the
implementations of SHE COP among bus operators during wee hour
operations. The data was collected by completing a set of checklist
after observing the activities during pre departure, during the trip, and
upon arrival. The results show that there are seven widely practiced
SHE COP elements. 22% of the buses have average speed exceeding
the maximum permissible speed on the highways (90 km/h), with
13% of the buses were travelling at the speed of more than 100 km/h.
The statistical analysis shows that there is only one significant
association which relates speeding with prior presence of
enforcement officers.
Abstract: This research aims to study the preferable tourism and
the elements of choosing tourist destination from domestic tourist in
Bangkok and the nearby areas in Thailand.The data were collected by
using 1249 set of questionnaires, in mid-August 2012. The result
illustrates that religious destinations are the most preferable places
for the tourist. The average expense per travel is approximately 47
USD a time. Travellers travel based on the advertisement in the
television and internet and their decisions is based on the reputation
of the destinations.
The result on a place dimension demonstrates the neatness and
well managed location play a crucial role on tourist destination.
Gender, age, marriage status and their origins are affecting their
spending and travelling behaviour. The researcher reckon that
providing the area of arcade, selling the souvenir and promoting
tourism among a young professional group would be an important
key follow the income distribution policy, including managing the
destination to welcome the family group, which the result is to
identified as the highest spending.
Abstract: This study proposes and tests a rescapturing elements of perceived gain and loss that, by perceived value of medical tourism products, influencintention of potential customers. Data from 301 usable qwere tested against the research model using the structmodeling approach. The results indicated that perceivedkey predictor of customer intentions. As for benefimedical quality, service quality and enjoyment wcomponents that significantly influenced the perceptiRegarding sacrifice, the effects of perceived risk on pewere significant. The findings can provide insights intohow destination countries can make medical tourism a wfor themselves and international patients.KeywordsMedical tourism, perceived valueintention.
Abstract: Measures of complexity and entropy have not converged to a single quantitative description of levels of organization of complex systems. The need for such a measure is increasingly necessary in all disciplines studying complex systems. To address this problem, starting from the most fundamental principle in Physics, here a new measure for quantity of organization and rate of self-organization in complex systems based on the principle of least (stationary) action is applied to a model system - the central processing unit (CPU) of computers. The quantity of organization for several generations of CPUs shows a double exponential rate of change of organization with time. The exact functional dependence has a fine, S-shaped structure, revealing some of the mechanisms of self-organization. The principle of least action helps to explain the mechanism of increase of organization through quantity accumulation and constraint and curvature minimization with an attractor, the least average sum of actions of all elements and for all motions. This approach can help describe, quantify, measure, manage, design and predict future behavior of complex systems to achieve the highest rates of self organization to improve their quality. It can be applied to other complex systems from Physics, Chemistry, Biology, Ecology, Economics, Cities, network theory and others where complex systems are present.
Abstract: Today Environmental Impact Assessment (EIA) is known as one of the most important tools for decision makers in the construction of civil and industrial projects towards sustainable development. In the past, projects were evaluated based on cost and benefit analysis regardless of the physical and biological environmental effects and its socio-economical impacts. According to the Department of Environment (DOE) of Iran's regulations, the construction of hydroelectric dams is an activity that requires an EIA report. In this paper the environmental impact assessment of the Gotvand hydro-electrical dam has been evaluated in the three environment elements, biological, Physical-chemical and cultural units. This dam is one of the largest dams in Iran with a volume of 4500 MCM and is going to be the last dam on the Karoon River in the south of Iran. In this paper the ICOLD (International Commission on Large Dams) technique was employed for the environmental impact assessment of the dam. The research includes all socio economical and environmental effects of the dam during the construction and operation of the hydro electric dam and Environmental management, monitoring and mitigation of negative impacts were analyzed. In this project the results led to using some techniques to protect the destructive impacts on biological aspects beside the effective long time period impacts on the biological aspects. The impacts on physical aspects are temporary and negative commonly that could be restored and rehabilitated in natural process in the long time in operation period.
Abstract: An inverse geometry problem is solved to predict an
unknown irregular boundary profile. The aim is to minimize the
objective function, which is the difference between real and
computed temperatures, using three different versions of Conjugate
Gradient Method. The gradient of the objective function, considered
necessary in this method, obtained as a result of solving the adjoint
equation. The abilities of three versions of Conjugate Gradient
Method in predicting the boundary profile are compared using a
numerical algorithm based on the method. The predicted shapes show
that due to its convergence rate and accuracy of predicted values, the
Powell-Beale version of the method is more effective than the
Fletcher-Reeves and Polak –Ribiere versions.
Abstract: The understanding of the system level of biological behavior and phenomenon variously needs some elements such as gene sequence, protein structure, gene functions and metabolic pathways. Challenging problems are representing, learning and reasoning about these biochemical reactions, gene and protein structure, genotype and relation between the phenotype, and expression system on those interactions. The goal of our work is to understand the behaviors of the interactions networks and to model their evolution in time and in space. We propose in this study an ontological meta-model for the knowledge representation of the genetic regulatory networks. Ontology in artificial intelligence means the fundamental categories and relations that provide a framework for knowledge models. Domain ontology's are now commonly used to enable heterogeneous information resources, such as knowledge-based systems, to communicate with each other. The interest of our model is to represent the spatial, temporal and spatio-temporal knowledge. We validated our propositions in the genetic regulatory network of the Aarbidosis thaliana flower
Abstract: Modes of occurrence of Pb, As, Cr, Co, Cu, and Ni in bituminous coal and lignite were determined by means of sequential extraction using NH4OAc, HCl, HF and HNO3 extraction solutions. Elemental affinities obtained were then evaluated in relation to volatility of these elements during the combustion of these coals in two circulating fluidised-bed power stations. It was found out that higher percentage of the elements bound in silicates brought about lower volatility, while higher elemental proportion with monosulphides association (or bound as exchangeable ion) resulted in higher volatility. The only exception was the behavior of arsenic, whose volatility depended on amount of limestone added during the combustion process (as desulphurisation additive) rather than to its association in coal.
Abstract: We present new finite element methods for Helmholtz and Maxwell equations on general three-dimensional polyhedral meshes, based on domain decomposition with boundary elements on the surfaces of the polyhedral volume elements. The methods use the lowest-order polynomial spaces and produce sparse, symmetric linear systems despite the use of boundary elements. Moreover, piecewise constant coefficients are admissible. The resulting approximation on the element surfaces can be extended throughout the domain via representation formulas. Numerical experiments confirm that the convergence behavior on tetrahedral meshes is comparable to that of standard finite element methods, and equally good performance is attained on more general meshes.