Abstract: The electromagnetic spectrum is a natural resource
and hence well-organized usage of the limited natural resources is the
necessities for better communication. The present static frequency
allocation schemes cannot accommodate demands of the rapidly
increasing number of higher data rate services. Therefore, dynamic
usage of the spectrum must be distinguished from the static usage to
increase the availability of frequency spectrum. Cognitive radio is not
a single piece of apparatus but it is a technology that can incorporate
components spread across a network. It offers great promise for
improving system efficiency, spectrum utilization, more effective
applications, reduction in interference and reduced complexity of
usage for users. Cognitive radio is aware of its environmental,
internal state, and location, and autonomously adjusts its operations
to achieve designed objectives. It first senses its spectral environment
over a wide frequency band, and then adapts the parameters to
maximize spectrum efficiency with high performance. This paper
only focuses on the analysis of Bit-Error-Rate in cognitive radio by
using Particle Swarm Optimization Algorithm. It is theoretically as
well as practically analyzed and interpreted in the sense of
advantages and drawbacks and how BER affects the efficiency and
performance of the communication system.
Abstract: Thirty six samples from each (aerobic and anoxic)
activated sludge were collected from two wastewater treatment plants
with MBRs in Berlin, Germany. The samples were prepared for count
and definition of fungal isolates; these isolates were purified by
conventional techniques and identified by microscopic examination.
Sixty tow species belonging to 28 genera were isolated from
activated sludge samples under aerobic conditions (28 genera and 58
species) and anoxic conditions (26 genera and 52 species). The
obtained data show that, Aspergillus was found at 94.4% followed by
Penicillium 61.1 %, Fusarium (61.1 %), Trichoderma (44.4 %) and
Geotrichum candidum (41.6 %) species were the most prevalent in all
activated sludge samples. The study confirmed that fungi can thrive
in activated sludge and sporulation, but isolated in different numbers
depending on the effect of aeration system. Some fungal species in
our study are saprophytic, and other a pathogenic to plants and
animals.
Abstract: One challenging direction of mobile commerce (mcommerce)
that is getting a great deal of attention globally is mobile
financing. The smart-phone and PDA users all around the world are
facing difficulties to become accustomed and trust in m-commerce.
The main rationale can be the slow variation and lack of trust in
mobile payment systems. Mobile payment systems that are in use
need to be more effective and efficient. This paper proposes: the
interface design is not the only factor affecting the m-commerce
adoption and lack of trust; in fact it is the combined effect of
interface usability and trustworthy mobile payment systems, because
it-s the money that the user has to spend at the end of the day, which
the user requires to get transferred securely. The purpose of this
research is to identify the problems regarding the trust and adaption
of m-commerce applications by mobile users and to provide the best
possible solution with respect to human computer interaction (HCI)
principles.
Abstract: The vertex connectivity of a graph is the smallest number of vertices whose deletion separates the graph or makes it trivial. This work is devoted to the problem of vertex connectivity test of graphs in a distributed environment based on a general and a constructive approach. The contribution of this paper is threefold. First, using a preconstructed spanning tree of the considered graph, we present a protocol to test whether a given graph is 2-connected using only local knowledge. Second, we present an encoding of this protocol using graph relabeling systems. The last contribution is the implementation of this protocol in the message passing model. For a given graph G, where M is the number of its edges, N the number of its nodes and Δ is its degree, our algorithms need the following requirements: The first one uses O(Δ×N2) steps and O(Δ×logΔ) bits per node. The second one uses O(Δ×N2) messages, O(N2) time and O(Δ × logΔ) bits per node. Furthermore, the studied network is semi-anonymous: Only the root of the pre-constructed spanning tree needs to be identified.
Abstract: In this paper the authors propose a protocol, which uses Elliptic Curve Cryptography (ECC) based on the ElGamal-s algorithm, for sending small amounts of data via an authentication server. The innovation of this approach is that there is no need for a symmetric algorithm or a safe communication channel such as SSL. The reason that ECC has been chosen instead of RSA is that it provides a methodology for obtaining high-speed implementations of authentication protocols and encrypted mail techniques while using fewer bits for the keys. This means that ECC systems require smaller chip size and less power consumption. The proposed protocol has been implemented in Java to analyse its features and vulnerabilities in the real world.
Abstract: In automatic manufacturing and assembling of mechanical, electrical and electronic parts one needs to reliably identify the position of components and to extract the information of these components. Data Matrix Codes (DMC) are established by these days in many areas of industrial manufacturing thanks to their concentration of information on small spaces. In today’s usually order-related industry, where increased tracing requirements prevail, they offer further advantages over other identification systems. This underlines in an impressive way the necessity of a robust code reading system for detecting DMC on the components in factories. This paper compares two methods for estimating the angle of orientation of Data Matrix Codes: one method based on the Hough Transform and the other based on the Mean Shift Algorithm. We concentrate on Data Matrix Codes in industrial environment, punched, milled, lasered or etched on different materials in arbitrary orientation.
Abstract: –In this paper the damage in clamped-free, clampedclamped and free-free beam are analyzed considering samples
without and with structural modifications. The damage location is
investigated by the use of the bispectrum and wavelet analysis. The
mathematical models are obtained using 2D elasticity theory and the
Finite Element Method (FEM). The numerical and experimental data
are approximated using the Particle Swarm Optimizer (PSO) method
and this way is possible to adjust the localization and the severity of
the damage. The experimental data are obtained through
accelerometers placed along the sample. The system is excited using
impact hammer.
Abstract: In this paper, we propose a practical digital music matching system that is robust to variation in sound qualities. The proposed system is subdivided into two parts: client and server. The client part consists of the input, preprocessing and feature extraction modules. The preprocessing module, including the music onset module, revises the value gap occurring on the time axis between identical songs of different formats. The proposed method uses delta-grouped Mel frequency cepstral coefficients (MFCCs) to extract music features that are robust to changes in sound quality. According to the number of sound quality formats (SQFs) used, a music server is constructed with a feature database (FD) that contains different sub feature databases (SFDs). When the proposed system receives a music file, the selection module selects an appropriate SFD from a feature database; the selected SFD is subsequently used by the matching module. In this study, we used 3,000 queries for matching experiments in three cases with different FDs. In each case, we used 1,000 queries constructed by mixing 8 SQFs and 125 songs. The success rate of music matching improved from 88.6% when using single a single SFD to 93.2% when using quadruple SFDs. By this experiment, we proved that the proposed method is robust to various sound qualities.
Abstract: A direct search approach to determine optimal reservoir operating is proposed with ant colony optimization for continuous domains (ACOR). The model is applied to a system of single reservoir to determine the optimum releases during 42 years of monthly steps. A disadvantage of ant colony based methods and the ACOR in particular, refers to great amount of computer run time consumption. In this study a highly effective procedure for decreasing run time has been developed. The results are compared to those of a GA based model.
Abstract: Effect of geometry on crushing behavior, energy absorption and failure mode of woven roving jute fiber/epoxy laminated composite tubes were experimentally studied. Investigations were carried out on three different geometrical types of composite tubes (circular, square and radial corrugated) subjected to axial compressive loading. It was observed in axial crushing study that the load bearing capability is significantly influenced by corrugation geometry. The influence of geometries of specimens was supported by the plotted load – displacement curves of the tests.
Abstract: We have considered an unmagnetized dusty plasma system consisting of ions obeying superthermal distribution and strongly coupled negatively charged dust. We have used reductive perturbation method and derived the Kordeweg-de Vries-Burgers (KdV-Burgers) equation. The behavior of the shock waves in the plasma has been investigated.
Abstract: The sensitivity of UAVs to the atmospheric effects are
apparent. All the same the meteorological support for the UAVs
missions is often non-adequate or partly missing.
In our paper we show a new complex meteorological support
system for different types of UAVs pilots, specialists and decision
makers, too. The mentioned system has two important parts with
different forecasts approach such as the statistical and dynamical
ones.
The statistical prediction approach is based on a large
climatological data base and the special analog method which is able
to select similar weather situations from the mentioned data base to
apply them during the forecasting procedure.
The applied dynamic approach uses the specific WRF model runs
twice a day and produces 96 hours, high resolution weather forecast
for the UAV users over the Hungary. An easy to use web-based
system can give important weather information over the Carpathian
basin in Central-Europe. The mentioned products can be reached via
internet connection.
Abstract: A variable structure model reference adaptive control
(VS-MRAC) strategy for active steering assistance of a two wheel
steering car is proposed. An ideal steering system with fixed
properties and moving on an ideal road is used as the reference
model, and the active steering assistance system is forced to attain
the same behavior as the reference model. The proposed system can
treat the nonlinear relationships between the side slip angles and
lateral forces on tire, and the uncertainties on friction of the road
surface, whose compensation are very important under critical
situations. Simulation results show improvements on yaw rate and
side slip.
Abstract: The aim of this study was to investigate the pregnancy
outcomes of teenage mothers at DanKhunThot hospital, Nakhon
Ratchasima, Thailand. A retrospective descriptive study was
conducted in 573 of teenage pregnant from charts reviewed from 1st
October 2010-31st March, 2012. Data were analyzed by frequency
distribution, mean and Standard Deviation.
The results shown several problems and negatives outcomes of
pregnancy in teenager such as not attended prenatal care, Low birth
weight infants, death fetus in utero and other complications. The
results of this study can be utilized in the development of prenatal,
perinatal and post natal care services, especially in DanKhunthot
Hospital contexts. Moreover, the results were present to the District
Health Care committees in order to enhance health care service
system for teenage pregnancy of DanKhunthot District in further.
Abstract: Machine Translation, (hereafter in this document
referred to as the "MT") faces a lot of complex problems from its
origination. Extracting multiword expressions is also one of the
complex problems in MT. Finding multiword expressions during
translating a sentence from English into Urdu, through existing
solutions, takes a lot of time and occupies system resources. We have
designed a simple relational data approach, in which we simply set a
bit in dictionary (database) for multiword, to find and handle
multiword expression. This approach handles multiword efficiently.
Abstract: This evaluation of land supply system performance in
China shall examine the combination of government functions and
national goals in order to perform a cost-benefit analysis of system
results. From the author's point of view, it is most productive to
evaluate land supply system performance at moments of system
transformation for the following reasons. The behavior and
input-output change of beneficial results at different times can be
observed when the system or policy changes and system performance
can be evaluated through a cost-benefit analysis during the process of
system transformation. Moreover, this evaluation method can avoid
the influence of land resource endowment. Different land resource
endowment methods and different economy development periods
result in different systems. This essay studies the contents, principles
and methods of land supply system performance evaluation. Taking
Beijing as an example, this essay optimizes and classifies the land
supply index, makes a quantitative evaluation of land supply system
performance through principal component analysis (PCA), and finally
analyzes the factors that influence land supply system performance at
times of system transformation.
Abstract: When designing satellites, one of the major issues aside for designing its primary subsystems is to devise its thermal. The thermal management of satellites requires solving different sets of issues with regards to modelling. If the satellite is well conditioned all other parts of the satellite will have higher temperature no matter what. The main issue of thermal modelling for satellite design is really making sure that all the other points of the satellite will be within the temperature limits they are designed. The insertion of power electronics in aerospace technologies is becoming widespread and the modern electronic systems used in space must be reliable and efficient with thermal management unaffected by outer space constraints. Many advanced thermal management techniques have been developed in recent years that have application in high power electronic systems. This paper presents a Three-Dimensional Modal Transmission Line Matrix (3D-TLM) implementation of transient heat flow in space power electronics. In such kind of components heat dissipation and good thermal management are essential. Simulation provides the cheapest tool to investigate all aspects of power handling. The 3DTLM has been successful in modeling heat diffusion problems and has proven to be efficient in terms of stability and complex geometry. The results show a three-dimensional visualisation of self-heating phenomena in the device affected by outer space constraints, and will presents possible approaches for increasing the heat dissipation capability of the power modules.
Abstract: The paper proposes a methodology to process the signals coming from the Transcranial Magnetic Stimulation (TMS) in order to identify the pathology and evaluate the therapy to treat the patients affected by demency diseases. In particular, a fuzzy model is developed to identify the demency of the patients affected by Subcortical Ischemic Vascular Dementia (SIVD) and to measure the effect of a repetitive TMS on their motor performances. A tool is also presented to support the mentioned analysis.
Abstract: In this paper, we analyze and test a scheme for the
estimation of electrical fundamental frequency signals from the
harmonic load current and voltage signals.
The scheme was based on using two different Multi Layer
Artificial Neural Networks (ML-ANN) one for the current and the
other for the voltage.
This study also analyzes and tests the effect of choosing the
optimum artificial neural networks- sizes which determine the quality
and accuracy of the estimation of electrical fundamental frequency
signals.
The simulink tool box of the Matlab program for the simulation of
the test system and the test of the neural networks has been used.
Abstract: Corrosion of metallic water pipelines buried below
ground surface is a function of the nature of the surrounding soil and
groundwater. This gives the importance of knowing the physical and
chemical characteristics of the pipe-s surrounding environment. The
corrosion of externally – unprotected metallic water pipelines,
specially ductile iron pipes, in localities with aggressive soil
conditions is becoming a significant problem. Anticorrosive
protection for metallic water pipelines, their fittings and accessories
is very important, because they may be attached by corrosion with
time. The tendency of a metallic substrate to corrode is a function of
the surface characteristics of the metal and of the metal/protective
film interface, the physical, electrical and electrochemical properties
of the film, and the nature of the environment in which the pipelines
system is placed. In this work the authors have looked at corrosion
problems of water pipelines and their control. The corrosive
properties of groundwater and soil environments are reviewed, and
parameters affecting corrosion are discussed. The purpose of this
work is to provide guidelines for materials selection in water and soil
environments, and how the water pipelines can be protected against
metallic corrosion.