Abstract: The purposes of this study are 1) to study the frequent
English writing errors of students registering the course: Reading and
Writing English for Academic Purposes II, and 2) to find out the
results of writing error correction by using coded indirect corrective
feedback and writing error treatments. Samples include 28 2nd year
English Major students, Faculty of Education, Suan Sunandha
Rajabhat University. Tool for experimental study includes the lesson
plan of the course; Reading and Writing English for Academic
Purposes II, and tool for data collection includes 4 writing tests of
short texts. The research findings disclose that frequent English
writing errors found in this course comprise 7 types of grammatical
errors, namely Fragment sentence, Subject-verb agreement, Wrong
form of verb tense, Singular or plural noun endings, Run-ons
sentence, Wrong form of verb pattern and Lack of parallel structure.
Moreover, it is found that the results of writing error correction by
using coded indirect corrective feedback and error treatment reveal
the overall reduction of the frequent English writing errors and the
increase of students’ achievement in the writing of short texts with
the significance at .05.
Abstract: This paper discusses E-government, in particular the
challenges that face adoption in Saudi Arabia. E-government can be
defined based on an existing set of requirements. In this research we
define E-government as a matrix of stakeholders: governments to
governments, governments to business and governments to citizens,
using information and communications technology to deliver and
consume services. E-government has been implemented for a
considerable time in developed countries. However, E-government
services still face many challenges in their implementation and
general adoption in many countries including Saudi Arabia. It has
been noted that the introduction of E-government is a major
challenge facing the government of Saudi Arabia, due to possible
concerns raised by its citizens. In addition, the literature review and
the discussion identify the influential factors that affect the citizens’
intention to adopt E-government services in Saudi Arabia.
Consequently, these factors have been defined and categorized
followed by an exploratory study to examine the importance of these
factors. Therefore, this research has identified factors that determine
if the citizen will adopt E-government services and thereby aiding
governments in accessing what is required to increase adoption.
Abstract: Various models have been derived by studying large number of completed software projects from various organizations and applications to explore how project sizes mapped into project effort. But, still there is a need to prediction accuracy of the models. As Neuro-fuzzy based system is able to approximate the non-linear function with more precision. So, Neuro-Fuzzy system is used as a soft computing approach to generate model by formulating the relationship based on its training. In this paper, Neuro-Fuzzy technique is used for software estimation modeling of on NASA software project data and performance of the developed models are compared with the Halstead, Walston-Felix, Bailey-Basili and Doty Models mentioned in the literature.
Abstract: The use of neural networks is popular in various
building applications such as prediction of heating load, ventilation
rate and indoor temperature. Significant is, that only few papers deal
with indoor carbon dioxide (CO2) prediction which is a very good
indicator of indoor air quality (IAQ). In this study, a data-driven
modelling method based on multilayer perceptron network for indoor
air carbon dioxide in an apartment building is developed.
Temperature and humidity measurements are used as input variables
to the network. Motivation for this study derives from the following
issues. First, measuring carbon dioxide is expensive and sensors
power consumptions is high and secondly, this leads to short
operating times of battery-powered sensors. The results show that
predicting CO2 concentration based on relative humidity and
temperature measurements, is difficult. Therefore, more additional
information is needed.
Abstract: The problem of frequent itemset mining is considered in this paper. One new technique proposed to generate frequent patterns in large databases without time-consuming candidate generation. This technique is based on focusing on transaction instead of concentrating on itemset. This algorithm based on take intersection between one transaction and others transaction and the maximum shared items between transactions computed instead of creating itemset and computing their frequency. With applying real life transactions and some consumption is taken from real life data, the significant efficiency acquire from databases in generation association rules mining.
Abstract: Nowadays, quick technological changes force companies
to develop innovative products in an increasingly competitive
environment. Therefore, how to enhance the time of new product
development is very important. This design problem often lacks
the exact formula for getting it, and highly depends upon human
designers- past experiences. For these reasons, in this work, a Casebased
reasoning (CBR) system to assist in new product development
is proposed. When a case is recovered from the case base, the system
will take into account not only the attribute-s specific value and
how important it is. It will also take into account if the attribute
has a positive influence over the product development. Hence the
manufacturing time will be improved. This information will be
introduced as a new concept called “adaptability". An application to
this method for hearing instrument new design illustrates the proposed
approach.
Abstract: Transpedicular screw fixation in spinal fractures,
degenerative changes, or deformities is a well-established procedure.
However, important rate of fixation failure due to screw bending,
loosening, or pullout are still reported particularly in weak bone stock
in osteoporosis. To overcome the problem, mechanism of failure has
to be fully investigated in vitro. Post-mortem human subjects are less
accessible and animal cadavers comprise limitations due to different
geometry and mechanical properties. Therefore, the development of a
synthetic model mimicking the realistic human vertebra is highly
demanded. A bone surrogate, composed of Polyurethane (PU) foam
analogous to cancellous bone porous structure, was tested for 3
different densities in this study. The mechanical properties were
investigated under uniaxial compression test by minimizing the end
artifacts on specimens. The results indicated that PU foam of 0.32
g.cm-3 density has comparable mechanical properties to human
cancellous bone in terms of young-s modulus and yield strength.
Therefore, the obtained information can be considered as primary
step for developing a realistic cancellous bone of human vertebral
body. Further evaluations are also recommended for other density
groups.
Abstract: Sediment loads transfer in hydraulic installations and their consequences for the O&M of modern canal systems is emerging as one of the most important considerations in hydraulic engineering projects apriticularly those which are inteded to feed the irrigation and draiange schemes of large command areas such as the Dez and Mogahn in Iran.. The aim of this paper is to investigate the applicability of the vortex tube as a viable means of extracting sediment loads entering the canal systems in general and the water inatke structures in particulars. The Western conveyance canal of the Dez Diversion weir which feeds the Karkheh Flood Plain in Sothwestern Dezful has been used as the case study using the data from the Dastmashan Hydrometric Station. The SHARC software has been used as an analytical framework to interprete the data. Results show that given the grain size D50 and the canal turbulence the adaption length from the beginning of the canal and after the diversion dam is estimated at 477 m, a point which is suitable for laying the vortex tube.
Abstract: Optical flow is a research topic of interest for many
years. It has, until recently, been largely inapplicable to real-time
applications due to its computationally expensive nature. This paper
presents a new reliable flow technique which is combined with a
motion detection algorithm, from stationary camera image streams,
to allow flow-based analyses of moving entities, such as rigidity, in
real-time. The combination of the optical flow analysis with motion
detection technique greatly reduces the expensive computation of
flow vectors as compared with standard approaches, rendering the
method to be applicable in real-time implementation. This paper
describes also the hardware implementation of a proposed pipelined
system to estimate the flow vectors from image sequences in real
time. This design can process 768 x 576 images at a very high frame
rate that reaches to 156 fps in a single low cost FPGA chip, which is
adequate for most real-time vision applications.
Abstract: The number of intrusions and attacks against critical
infrastructures and other information networks is increasing rapidly.
While there is no identified evidence that terrorist organizations are
currently planning a coordinated attack against the vulnerabilities of
computer systems and network connected to critical infrastructure,
and origins of the indiscriminate cyber attacks that infect computers
on network remain largely unknown. The growing trend toward the
use of more automated and menacing attack tools has also
overwhelmed some of the current methodologies used for tracking
cyber attacks. There is an ample possibility that this kind of cyber
attacks can be transform to cyberterrorism caused by illegal purposes.
Cyberterrorism is a matter of vital importance to national welfare.
Therefore, each countries and organizations have to take a proper
measure to meet the situation and consider effective legislation about
cyberterrorism.
Abstract: To achieve accurate and precise results of finite
element analysis (FEA) of bones, it is important to represent the
load/boundary conditions as identical as possible to the human body
such as the bone properties, the type and force of the muscles, the
contact force of the joints, and the location of the muscle attachment.
In this study, the difference in the Von-Mises stress and the total
deformation was compared by classifying them into Case 1, which
shows the actual anatomical form of the muscle attached to the femur
when the same muscle force was applied, and Case 2, which gives a
simplified representation of the attached location. An inverse
dynamical musculoskeletal model was simulated using data from an
actual walking experiment to complement the accuracy of the
muscular force, the input value of FEA. The FEA method using the
results of the muscular force that were calculated through the
simulation showed that the maximum Von-Mises stress and the
maximum total deformation in Case 2 were underestimated by 8.42%
and 6.29%, respectively, compared to Case 1. The torsion energy and
bending moment at each location of the femur occurred via the stress
ingredient. Due to the geometrical/morphological feature of the femur
of having a long bone shape when the stress distribution is wide, as
shown in Case 1, a greater Von-Mises stress and total deformation are
expected from the sum of the stress ingredients. More accurate results
can be achieved only when the muscular strength and the attachment
location in the FEA of the bones and the attachment form are the same
as those in the actual anatomical condition under the various moving
conditions of the human body.
Abstract: The frequency dependence of the phase field
model(PFM) is studied. A simple PFM is proposed, and is tested in a
laminar boundary layer. The Blasius-s laminar boundary layer
solution on a flat plate is used for the flow pattern, and several
frequencies are imposed on the PFM, and the decay times of the
interfaces are obtained. The computations were conducted for three
cases: 1) no-flow, and 2) a half ball on the laminar boundary layer, 3) a
line of mass sources in the laminar boundary layer. The computations
show the decay time becomes shorter as the frequency goes larger, and
also show that it is sensitive to both background disturbances and
surface tension parameters. It is concluded that the proposed simple
PFM can describe the properties of decay process, and could give the
fundamentals for the decay of the interface in turbulent flows.
Abstract: In this paper, we have proposed a novel FinFET with
extended body under the poly gate, which is called EB-FinFET, and
its characteristic is demonstrated by using three-dimensional (3-D)
numerical simulation. We have analyzed and compared it with
conventional FinFET. The extended body height dependence on the
drain induced barrier lowering (DIBL) and subthreshold swing (S.S)
have been also investigated. According to the 3-D numerical
simulation, the proposed structure has a firm structure, an acceptable
short channel effect (SCE), a reduced series resistance, an increased
on state drain current (I
on) and a large normalized I
DS. Furthermore,
the structure can also improve corner effect and reduce self-heating
effect due to the extended body. Our results show that the EBFinFET
is excellent for nanoscale device.
Abstract: Currently, there has been a 3G mobile networks data
traffic explosion due to the large increase in the number of smartphone
users. Unlike a traditional wired infrastructure, 3G mobile networks
have limited wireless resources and signaling procedures for complex
wireless resource management. And mobile network security for
various abnormal and malicious traffic technologies was not ready. So
Malicious or potentially malicious traffic originating from mobile
malware infected smart devices can cause serious problems to the 3G
mobile networks, such as DoS and scanning attack in wired networks.
This paper describes the DoS security threat in the 3G mobile network
and proposes a detection technology.
Abstract: The ability to recognize humans and their activities by computer vision is a very important task, with many potential application. Study of human motion analysis is related to several research areas of computer vision such as the motion capture, detection, tracking and segmentation of people. In this paper, we describe a segmentation method for extracting human body contour in modified HLS color space. To estimate a background, the modified HLS color space is proposed, and the background features are estimated by using the HLS color components. Here, the large amount of human dataset, which was collected from DV cameras, is pre-processed. The human body and its contour is successfully extracted from the image sequences.
Abstract: In this paper we propose a new traffic simulation
package, TDMSim, which supports both macroscopic and
microscopic simulation on free-flowing and regulated traffic systems.
Both simulators are based on travel demands, which specify the
numbers of vehicles departing from origins to arrive at different
destinations. The microscopic simulator implements the carfollowing
model given the pre-defined routes of the vehicles but also
supports the rerouting of vehicles. We also propose a macroscopic
simulator which is built in integration with the microscopic simulator
to allow the simulation to be scaled for larger networks without
sacrificing the precision achievable through the microscopic
simulator. The macroscopic simulator also enables the reuse of
previous simulation results when simulating traffic on the same
networks at later time. Validations have been conducted to show the
correctness of both simulators.
Abstract: This paper presents development of an ignition system using spark electrodes for application in a research explosion vessel.
A single spark is aimed to be discharged with quantifiable ignition energy. The spark electrode system would enable study of flame
propagation, ignitability of fuel-air mixtures and other fundamental characteristics of flames. The principle of the capacitive spark circuit
of ASTM is studied to charge an appropriate capacitance connected across the spark gap through a large resistor by a high voltage from
the source of power supply until the initiation of spark. Different spark energies could be obtained mainly by varying the value of the
capacitance and the supply current. The spark sizes produced are found to be affected by the spark gap, electrode size, input voltage
and capacitance value.
Abstract: I/O workload is a critical and important factor to
analyze I/O pattern and to maximize file system performance.
However to measure I/O workload on running distributed parallel file
system is non-trivial due to collection overhead and large volume of
data. In this paper, we measured and analyzed file system activities on
two large-scale cluster systems which had TFlops level high
performance computation resources. By comparing file system
activities of 2009 with those of 2006, we analyzed the change of I/O
workloads by the development of system performance and high-speed
network technology.
Abstract: In a competitive production environment, critical
decision making are based on data resulted by random sampling of
product units. Efficiency of these decisions depends on data quality
and also their reliability scale. This point leads to the necessity of a
reliable measurement system. Therefore, the conjecture process and
analysing the errors contributes to a measurement system known as
Measurement System Analysis (MSA). The aim of this research is on
determining the necessity and assurance of extensive development in
analysing measurement systems, particularly with the use of
Repeatability and Reproducibility Gages (GR&R) to improve
physical measurements. Nowadays in productive industries,
repeatability and reproducibility gages released so well but they are
not applicable as well as other measurement system analysis
methods. To get familiar with this method and gain a feedback in
improving measurement systems, this survey would be on
“ANOVA" method as the most widespread way of calculating
Repeatability and Reproducibility (R&R).
Abstract: The acidity of different raw Jordanian clays
containing zeolite, bentonite, red and white kaolinite and diatomite
was characterized by means of temperature programmed desorption
(TPD) of ammonia, conversion of 2-methyl-3-butyn-2-ol (MBOH),
FTIR and BET-measurements. FTIR spectra proved presence of
silanol and bridged hydroxyls on the clay surface. The number of
acidic sites was calculated from experimental TPD-profiles. We
observed the decrease of surface acidity correlates with the decrease
of Si/Al ratio except for diatomite. On the TPD-plot for zeolite two
maxima were registered due to different strength of surface acidic
sites. Values of MBOH conversion, product yields and selectivity
were calculated for the catalysis on Jordanian clays. We obtained that
all clay samples are able to convert MBOH into a major product
which is 3-methyl-3-buten-1-yne (MBYNE) catalyzed by acid
surface sites with the selectivity close to 70%. There was found a
correlation between MBOH conversion and acidity of clays
determined by TPD-NH3, i.e. the higher the acidity the higher the
conversion of MBOH. However, diatomite provided the lowest
conversion of MBOH as result of poor polarization of silanol groups.
Comparison of surface areas and conversions revealed the highest
density of active sites for red kaolinite and the lowest for zeolite and
diatomite.