Abstract: Over half of the total electricity consumption is used in buildings. Air-conditioning and electric lighting are the two main resources of electricity consumption in high rise buildings. One way to reduce electricity consumption would be to limit heat gain into buildings, therefore reduce the demand for air-conditioning during hot summer months especially in hot regions. On the other hand natural daylight can be used to reduce the use of electricity for artificial lighting. In this paper effective factors on minimizing heat gain and achieving required day light were reviewed .As daylight always accompanied by solar heat gain. Also interactions between heat gain and daylight were discussed through previous studies and equations which are related to heat gain and day lighting especially in high rise buildings. As a result importance of building-s form and its component on energy consumption in buildings were clarified.
Abstract: In order to assess optical fiber reliability in different environmental and stress conditions series of testing are performed simulating overlapping of chemical and mechanical controlled varying factors. Each series of testing may be compared using statistical processing: i.e. Weibull plots. Due to the numerous data to treat, a software application has appeared useful to interpret selected series of experiments in function of envisaged factors. The current paper presents a software application used in the storage, modelling and interpretation of experimental data gathered from optical fibre testing. The present paper strictly deals with the software part of the project (regarding the modelling, storage and processing of user supplied data).
Abstract: This paper presents the Function Approximation
Technique (FAT) based adaptive impedance control for a robotic
finger. The force based impedance control is developed so that the
robotic finger tracks the desired force while following the reference
position trajectory, under unknown environment position and
uncertainties in finger parameters. The control strategy is divided into
two phases, which are the free and contact phases. Force error
feedback is utilized in updating the uncertain environment position
during contact phase. Computer simulations results are presented to
demonstrate the effectiveness of the proposed technique.
Abstract: Nanocrystals (NC) alloyed composite CdSxSe1-x(x=0
to 1) have been prepared using the chemical solution deposition
technique. The energy band gap of these alloyed nanocrystals of
approximately the same size, have been determined by scanning
tunneling spectroscopy (STS) technique at room temperature. The
values of the energy band gap obtained directly using STS are
compared to those measured by optical spectroscopy. Increasing the
molar fraction ratio x from 0 to 1 causes clearly observed increase in
the band gap of the alloyed composite nanocrystal. Vegard-s law was
applied to calculate the parameters of the effective mass
approximation (EMA) model and the dimension obtained were
compared to the values measured by STM. The good agreement of
the calculated and measured values is a direct result of applying
Vegard's law in the nanocomposites.
Abstract: Information is a critical asset and an important source for gaining competitive advantage in firms. The effective maintenance of IT becomes an important task. In order to better understand the determinants of IT effectiveness, this study employs the Industrial Organization (I/O) and Resource Based View (RBV) theories and investigates the industry effect and several major firmspecific factors in relation to their impact on firms- IT effectiveness. The data consist of a panel data of ten-year observations of firms whose IT excellence had been recognized by the CIO Magazine. The non-profit organizations were deliberately excluded, as explained later. The results showed that the effectiveness of IT management varied significantly across industries. Industry also moderated the effects of firm demographic factors such as size and age on IT effectiveness. Surprisingly, R & D investment intensity had negative correlation to IT effectiveness. For managers and practitioners, this study offers some insights for evaluation criteria and expectation for IT project success. Finally, the empirical results indicate that the sustainability of IT effectiveness appears to be short in duration.
Abstract: The present study aims to explore the role of parents'
ethnic socialization practices contributes to the ethnic identity
development, self-esteem and psychological adjustment of multi
ethnic children in Sabah, Malaysia. A total of 342 multi ethnic
children (age range = 10 years old to 14 years old; mean age = 12.65
years, SD = 0.88) and their parents participated in the present study.
The modified version of Multi group Ethnic Identity Measure
(MEIM), The Familial Ethnic Socialization Measure (FESM). The
Rosenberg Self-Esteem Scale (RSE) and Behavioral and Emotional
Rating Scale Edition 2 (BERS-2) were used in this study. The results
showed that: i) parents' ethnic socialization practice was a strong
predictor of ethnic identity development of multi ethnic children; ii)
parents' ethnic socialization practice also was a significant predictor
of self-esteem of multi ethnic children; iii) parents' ethnic
socialization practice was not a significant predictor of psychological
adjustment of multi ethnic children. The results of this study showed
the implications parents' ethnic socialization practices and ethnic
identity development in successful multi ethnic families.
Abstract: The waverider is proved to be a remarkably useful
configuration for hypersonic glide vehicle (HGV) in terms of the high
lift-to-drag ratio. Due to the severe aerodynamic heating and the
processing technical restriction, the sharp leading edge of waverider
should be blunted, and then the flow characteristics and the
aerodynamic performance along the trajectory will change. In this
paper, the flow characteristics of a HGV, including the rarefied gas
effect and transition phenomenon, were studied based on a reference
trajectory. A numerical simulation was carried out to study the
performance of the HGV under a typical condition.
Abstract: This paper presents a computer simulation model based on system dynamics methodology for analyzing the dynamic characteristics of input energy structure in agriculture and Bangladesh is used here as a case study for model validation. The model provides an input energy structure linking the major energy flows with human energy and draft energy from cattle as well as tractors and/or power tillers, irrigation, chemical fertilizer and pesticide. The evaluation is made in terms of different energy dependent indicators. During the simulation period, the energy input to agriculture increased from 6.1 to 19.15 GJ/ha i.e. 2.14 fold corresponding to energy output in terms of food, fodder and fuel increase from 71.55 to 163.58 GJ/ha i.e. 1.28 fold from the base year. This result indicates that the energy input in Bangladeshi agricultural production is increasing faster than the energy output. Problems such as global warming, nutrient loading and pesticide pollution can associate with this increasing input. For an assessment, a comparative statement of input energy use in agriculture of developed countries (DCs) and least developed countries (LDCs) including Bangladesh has been made. The performance of the model is found satisfactory to analyze the agricultural energy system for LDCs
Abstract: A solar refrigeration system based on the adsorptiondesorption
phenomena is designed and analyzed. An annular tubular
generator filled with silica gel adsorbent and with a perforated inner
cylinder is integrated within a flat solar collector. The working fluid
in the refrigeration cycle is water. The thermodynamic analysis and
because of the temperature level that could be attained with a flat
solar collector it is required that the system operates under vacuum
conditions. In order to enhance the performance of the system and to
get uniform temperature in the silica gel and higher desorbed mass,
an apparatus for rotation of the generator is incorporated in the
system. Testing is carried out and measurements are taken on the
designed installation. The effect of rotation is checked on the
temperature distribution and on the performance of this machine and
compared to the flat solar collector with fixed generator.
Abstract: In this paper, we propose a robust scheme to work face alignment and recognition under various influences. For face representation, illumination influence and variable expressions are the important factors, especially the accuracy of facial localization and face recognition. In order to solve those of factors, we propose a robust approach to overcome these problems. This approach consists of two phases. One phase is preprocessed for face images by means of the proposed illumination normalization method. The location of facial features can fit more efficient and fast based on the proposed image blending. On the other hand, based on template matching, we further improve the active shape models (called as IASM) to locate the face shape more precise which can gain the recognized rate in the next phase. The other phase is to process feature extraction by using principal component analysis and face recognition by using support vector machine classifiers. The results show that this proposed method can obtain good facial localization and face recognition with varied illumination and local distortion.
Abstract: This paper reports the fatigue crack growth behaviour
of gas tungsten arc, electron beam and laser beam welded Ti-6Al-4V
titanium alloy. Centre cracked tensile specimens were prepared to
evaluate the fatigue crack growth behaviour. A 100kN servo
hydraulic controlled fatigue testing machine was used under constant
amplitude uniaxial tensile load (stress ratio of 0.1 and frequency of
10 Hz). Crack growth curves were plotted and crack growth
parameters (exponent and intercept) were evaluated. Critical and
threshold stress intensity factor ranges were also evaluated. Fatigue
crack growth behaviour of welds was correlated with mechanical
properties and microstructural characteristics of welds. Of the three
joints, the joint fabricated by laser beam welding exhibited higher
fatigue crack growth resistance due to the presence of fine lamellar
microstructure in the weld metal.
Abstract: Luxury is an identity, a philosophy and a culture
which requires understanding before the adoption of e-business
practices because of its intricacies and output are essentially different
from other types of goods. Factors such as culture, personal
characteristics, website quality, and vendor characteristics influence
the online purchasing behavior of consumers thus making it a
complex area of study. This paper explores the scope of e-retail for
luxury consumption in the U.A.E. by identifying what motivates and
de-motivates online purchase behavior of U.A.E. consumers and
necessary hypotheses have been drawn to reflect behavior between
online luxury preference consumers and non-online luxury preference
consumers.
Abstract: The aim of this study was to investigate the
effectiveness of anaerobic digestion for the treatment of wool
scouring wastes. The experiments design comprised three ratios of
waste (W) to seed(S) (W:S) of 25:75, 50:50 and 75:25, corresponding
to 1.9. 1.7 and 1.5g tCOD/g TS, respectively, with or without
chemicals addition. NH4Cl was added to the reactors as a source for
nitrogen to achieve C:N:P of 420:14:3. A cationic flocculent was
added at 0.5 and 0.75% to enhance flocculation of sludge. The results
showed that the reactors that received W:S at a ratio of 25:75
produced the largest volume of biogas. The final soluble COD
(sCOD) was below the limits for discharge to the sewer system.
Abstract: A fusion classifier composed of two modules, one made by a hidden Markov model (HMM) and the other by a support vector machine (SVM), is proposed to recognize faces with pose variations in open-set recognition settings. The HMM module captures the evolution of facial features across a subject-s face using the subject-s facial images only, without referencing to the faces of others. Because of the captured evolutionary process of facial features, the HMM module retains certain robustness against pose variations, yielding low false rejection rates (FRR) for recognizing faces across poses. This is, however, on the price of poor false acceptance rates (FAR) when recognizing other faces because it is built upon withinclass samples only. The SVM module in the proposed model is developed following a special design able to substantially diminish the FAR and further lower down the FRR. The proposed fusion classifier has been evaluated in performance using the CMU PIE database, and proven effective for open-set face recognition with pose variations. Experiments have also shown that it outperforms the face classifier made by HMM or SVM alone.
Abstract: A combination of image fusion and quad tree decomposition method is used for detecting the sunspot trajectories in each month and computation of the latitudes of these trajectories in each solar hemisphere. Daily solar images taken with SOHO satellite are fused for each month and the result of fused image is decomposed with Quad Tree decomposition method in order to classifying the sunspot trajectories and then to achieve the precise information about latitudes of sunspot trajectories. Also with fusion we deduce some physical remarkable conclusions about sun magnetic fields behavior. Using quad tree decomposition we give information about the region on sun surface and the space angle that tremendous flares and hot plasma gases permeate interplanetary space and attack to satellites and human technical systems. Here sunspot images in June, July and August 2001 are used for studying and give a method to compute the latitude of sunspot trajectories in each month with sunspot images.
Abstract: More and more governments around the world are
introducing e-government as a means of reducing costs, improving
services, saving time and increasing effectiveness and efficiency in
the public sector Therefore e-government has been identified as one
of the top priorities for Saudi government and all its agencies.
However, the adoption of e-government is facing many challenges
and barriers such as technological, cultural, organizational, and social
issues which must be considered and treated carefully by any
government contemplating its adoption. This paper reports on a pilot
study amongst online (e-ready) citizens to identify the challenges and
barriers that affect the adoption of e-government services especially
from their perspective in Saudi society. Based on the analysis of data
collected from an online survey the researcher was able to identify
some of the important barriers and challenges from the e-ready
citizen perspective. As a result, this study has generated a list of
possible strategies to move towards successful adoption of egovernment
services in Saudi Arabia.
Abstract: Cs-type nanocomposite zeolite membrane was successfully synthesized on an alumina ceramic hollow fibre with a mean outer diameter of 1.7 mm; cesium cationic exchange test was carried out inside test module with mean wall thickness of 230 μm and an average crossing pore size smaller than 0.2 μm. Separation factor of n-butane/H2 obtained indicate that a relatively high quality closed to 20. Maxwell-Stefan modeling provides an equivalent thickness lower than 1 µm. To compare the difference an application to CO2/N2 separation has been achieved, reaching separation factors close to (4,18) before and after cation exchange on H-zeolite membrane formed within the pores of a ceramic alumina substrate.
Abstract: Safety instrumented systems (SISs) are becoming
increasingly complex and the proportion of programmable electronic
parts is growing. The IEC 61508 global standard was established to
ensure the functional safety of SISs, but it was expressed in highly
macroscopic terms. This study introduces an evaluation process for
hardware safety integrity levels through failure modes, effects, and
diagnostic analysis (FMEDA).FMEDA is widely used to evaluate
safety levels, and it provides the information on failure rates and
failure mode distributions necessary to calculate a diagnostic coverage
factor for a given component. In our evaluation process, the
components of the SIS subsystem are first defined in terms of failure
modes and effects. Then, the failure rate and failure mechanism
distribution are assigned to each component. The safety mode and
detectability of each failure mode are determined for each component.
Finally, the hardware safety integrity level is evaluated based on the
calculated results.
Abstract: It is important to predict yield in semiconductor test process in order to increase yield. In this study, yield prediction means finding out defective die, wafer or lot effectively. Semiconductor test process consists of some test steps and each test includes various test items. In other world, test data has a big and complicated characteristic. It also is disproportionably distributed as the number of data belonging to FAIL class is extremely low. For yield prediction, general data mining techniques have a limitation without any data preprocessing due to eigen properties of test data. Therefore, this study proposes an under-sampling method using support vector machine (SVM) to eliminate an imbalanced characteristic. For evaluating a performance, randomly under-sampling method is compared with the proposed method using actual semiconductor test data. As a result, sampling method using SVM is effective in generating robust model for yield prediction.
Abstract: Nowadays, with the emerging of the new applications
like robot control in image processing, artificial vision for visual
servoing is a rapidly growing discipline and Human-machine
interaction plays a significant role for controlling the robot. This
paper presents a new algorithm based on spatio-temporal volumes for
visual servoing aims to control robots. In this algorithm, after
applying necessary pre-processing on video frames, a spatio-temporal
volume is constructed for each gesture and feature vector is extracted.
These volumes are then analyzed for matching in two consecutive
stages. For hand gesture recognition and classification we tested
different classifiers including k-Nearest neighbor, learning vector
quantization and back propagation neural networks. We tested the
proposed algorithm with the collected data set and results showed the
correct gesture recognition rate of 99.58 percent. We also tested the
algorithm with noisy images and algorithm showed the correct
recognition rate of 97.92 percent in noisy images.