Abstract: Some physico-chemical characteristics and mineral
composition of 'Karayemis' (Prunus laurocerasus L.) fruits which
grown naturally in Norteast Turkey was studied. 28 minerals ( Al,
Mg, B, Mn, Co, Na, Ca, Ni, Cd, P, Cr, Pb, Cu, S, Fe, Zn, K, Sr, Li,
As, V, Ag, Ba, Br, Ga, In, Se, Ti) were analyzed and 19 minerals
were present at ascertainable levels. Karayemis fruit was richest in
potassium (7938.711 ppm), magnesium (1242.186 ppm) and calcium
(1158.853 ppm). And some physico-chemical characteristics of
Karayemis fruit was investigated. Fruit length, fruit width, fruit
thickness, fruit weight, total soluble solids, colour, protein, crude ash,
crude fiber, crude oil values were determined as 2.334 cm, 1.884 cm,
2.112 cm, 5.35 g, 20.1 %, S99M99Y99, 0.29 %, 0.22 %, 6.63 % and
0.001 %, respectively. The seed of fruit mean weight, length, width
and thickness were found to be 0.41 g, 1.303 cm, 0.921 cm and
0.803, respectively.
Abstract: This paper features the mathematical modeling of a single input single output based Timoshenko smart beam. Further, this mathematical model is used to design a multirate output feedback based discrete sliding mode controller using Bartoszewicz law to suppress the flexural vibrations. The first 2 dominant vibratory modes is retained. Here, an application of the discrete sliding mode control in smart systems is presented. The algorithm uses a fast output sampling based sliding mode control strategy that would avoid the use of switching in the control input and hence avoids chattering. This method does not need the measurement of the system states for feedback as it makes use of only the output samples for designing the controller. Thus, this methodology is more practical and easy to implement.
Abstract: Rarefied gas flows are often occurred in micro electro
mechanical systems and classical CFD could not precisely anticipate
the flow and thermal behavior due to the high Knudsen number.
Therefore, the heat transfer and the fluid dynamics characteristics of
rarefied gas flows in both a two-dimensional simple microchannel
and geometry similar to single Knudsen compressor have been
investigated with a goal of increasing performance of a actual
Knudsen compressor by using a particle simulation method. Thermal
transpiration and thermal creep, which are rarefied gas dynamic
phenomena, that cause movement of the flow from less to higher
temperature is generated by using two different longitude temperature
gradients (Linear, Step) along the walls of the flow microchannel. In
this study the influence of amount of temperature gradient and
governing pressure in various Knudsen numbers and length-to-height
ratios have been examined.
Abstract: Timetabling problems are often hard and timeconsuming
to solve. Most of the methods of solving them concern
only one problem instance or class. This paper describes a universal
method for solving large, highly constrained timetabling problems
from different domains. The solution is based on evolutionary
algorithm-s framework and operates on two levels – first-level
evolutionary algorithm tries to find a solution basing on given set of
operating parameters, second-level algorithm is used to establish
those parameters. Tabu search is employed to speed up the solution
finding process on first level. The method has been used to solve
three different timetabling problems with promising results.
Abstract: How to coordinate the behaviors of the agents through
learning is a challenging problem within multi-agent domains.
Because of its complexity, recent work has focused on how
coordinated strategies can be learned. Here we are interested in using
reinforcement learning techniques to learn the coordinated actions of a
group of agents, without requiring explicit communication among
them. However, traditional reinforcement learning methods are based
on the assumption that the environment can be modeled as Markov
Decision Process, which usually cannot be satisfied when multiple
agents coexist in the same environment. Moreover, to effectively
coordinate each agent-s behavior so as to achieve the goal, it-s
necessary to augment the state of each agent with the information
about other existing agents. Whereas, as the number of agents in a
multiagent environment increases, the state space of each agent grows
exponentially, which will cause the combinational explosion problem.
Profit sharing is one of the reinforcement learning methods that allow
agents to learn effective behaviors from their experiences even within
non-Markovian environments. In this paper, to remedy the drawback
of the original profit sharing approach that needs much memory to
store each state-action pair during the learning process, we firstly
address a kind of on-line rational profit sharing algorithm. Then, we
integrate the advantages of modular learning architecture with on-line
rational profit sharing algorithm, and propose a new modular
reinforcement learning model. The effectiveness of the technique is
demonstrated using the pursuit problem.
Abstract: Obtaining labeled data in supervised learning is often
difficult and expensive, and thus the trained learning algorithm tends
to be overfitting due to small number of training data. As a result,
some researchers have focused on using unlabeled data which may
not necessary to follow the same generative distribution as the labeled
data to construct a high-level feature for improving performance on
supervised learning tasks. In this paper, we investigate the impact of
the relationship between unlabeled and labeled data for classification
performance. Specifically, we will apply difference unlabeled data
which have different degrees of relation to the labeled data for
handwritten digit classification task based on MNIST dataset. Our
experimental results show that the higher the degree of relation
between unlabeled and labeled data, the better the classification
performance. Although the unlabeled data that is completely from
different generative distribution to the labeled data provides the lowest
classification performance, we still achieve high classification performance.
This leads to expanding the applicability of the supervised
learning algorithms using unsupervised learning.
Abstract: Boon Rawd Brewery is a beer company based in
Thailand that has an exemplary image, both as a good employer and a
well-managed company with a strong record of social responsibility.
The most famous of the company’s products is Singha beer. To study
the company’s marketing strategy, a case study analysis was
conducted together with qualitative research methods. The study
analyzed the marketing strategy of Boon Rawd Brewery before the
liberalization of the liquor market in 2000. The company’s marketing
strategies consisted of the following: product line strategy, product
development strategy, block channel strategy, media strategy, trade
strategy, and consumer incentive strategy. Additionally, the company
employed marketing mix strategy based on the 4Ps: product, price,
promotion and place (of distribution).
Abstract: In this paper a modification on Levenberg-Marquardt algorithm for MLP neural network learning is proposed. The proposed algorithm has good convergence. This method reduces the amount of oscillation in learning procedure. An example is given to show usefulness of this method. Finally a simulation verifies the results of proposed method.
Abstract: With the development of virtual communities, there is
an increase in the number of members in Virtual Communities (VCs).
Many join VCs with the objective of sharing their knowledge and
seeking knowledge from others. Despite the eagerness of sharing
knowledge and receiving knowledge through VCs, there is no
standard of assessing ones knowledge sharing capabilities and
prospects of knowledge sharing. This paper developed a vector space
model to assess the knowledge sharing prospect of VC users.
Abstract: This paper deals with the modeling and the evaluation of a multiplicative phase noise influence on the bit error ratio in a general space communication system. Our research is focused on systems with multi-state phase shift keying modulation techniques and it turns out, that the phase noise significantly affects the bit error rate, especially for higher signal to noise ratios. These results come from a system model created in Matlab environment and are shown in a form of constellation diagrams and bit error rate dependencies. The change of a user data bit rate is also considered and included into simulation results. Obtained outcomes confirm theoretical presumptions.
Abstract: The computer, among the most important inventions of the twentieth century, has become an increasingly important component in our everyday lives. Computer games also have become increasingly popular among people day-by-day, owing to their features based on realistic virtual environments, audio and visual features, and the roles they offer players. In the present study, the metaphors students have for computer games are investigated, as well as an effort to fill the gap in the literature. Students were asked to complete the sentence—‘Computer game is like/similar to….because….’— to determine the middle school students’ metaphorical images of the concept for ‘computer game’. The metaphors created by the students were grouped in six categories, based on the source of the metaphor. These categories were ordered as ‘computer game as a means of entertainment’, ‘computer game as a beneficial means’, ‘computer game as a basic need’, ‘computer game as a source of evil’, ‘computer game as a means of withdrawal’, and ‘computer game as a source of addiction’, according to the number of metaphors they included.
Abstract: In 2002 an amendment to SOLAS opened for
lightweight material constructions in vessels if the same fire safety as
in steel constructions could be obtained. FISPAT (FIreSPread
Analysis Tool) is a computer application that simulates fire spread
and fault injection in cruise vessels and identifies fire sensitive areas.
It was developed to analyze cruise vessel designs and provides a
method to evaluate network layout and safety of cruise vessels. It
allows fast, reliable and deterministic exhaustive simulations and
presents the result in a graphical vessel model. By performing the
analysis iteratively while altering the cruise vessel design it can be
used along with fire chamber experiments to show that the
lightweight design can be as safe as a steel construction and that
SOLAS regulations are fulfilled.
Abstract: The study was a case study analysis about Thai Asia
Pacific Brewery Company. The purpose was to analyze the
company’s marketing objective, marketing strategy at company level,
and marketing mix before liquor liberalization in 2000. Methods used
in this study were qualitative and descriptive research approach
which demonstrated the following results of the study demonstrated
as follows: (1) Marketing objective was to increase market share of
Heineken and Amtel, (2) the company’s marketing strategies were
brand building strategy and distribution strategy. Additionally, the
company also conducted marketing mix strategy as follows. Product
strategy: The company added more beer brands namely Amstel and
Tiger to provide additional choice to consumers, product and
marketing research, and product development. Price strategy: the
company had taken the following into consideration: cost,
competitor, market, economic situation and tax. Promotion strategy:
the company conducted sales promotion and advertising. Distribution
strategy: the company extended channels its channels of distribution
into food shops, pubs and various entertainment places. This strategy
benefited interested persons and people who were engaged in the beer
business.
Abstract: This paper presents a method to support dynamic
packing in cases when no collision-free path can be found. The
method, which is primarily based on path planning and shrinking of
geometries, suggests a minimal geometry design change that results
in a collision-free assembly path. A supplementing approach to
optimize geometry design change with respect to redesign cost is
described. Supporting this dynamic packing method, a new method
to shrink geometry based on vertex translation, interweaved with
retriangulation, is suggested. The shrinking method requires neither
tetrahedralization nor calculation of medial axis and it preserves the
topology of the geometry, i.e. holes are neither lost nor introduced.
The proposed methods are successfully applied on industrial
geometries.
Abstract: In this paper discrete choice models, Logit and Probit
are examined in order to predict the economic recession or expansion
periods in USA. Additionally we propose an adaptive neuro-fuzzy
inference system with triangular membership function. We examine
the in-sample period 1947-2005 and we test the models in the out-of
sample period 2006-2009. The forecasting results indicate that the
Adaptive Neuro-fuzzy Inference System (ANFIS) model outperforms
significant the Logit and Probit models in the out-of sample period.
This indicates that neuro-fuzzy model provides a better and more
reliable signal on whether or not a financial crisis will take place.
Abstract: This research aims to study the lead pollution in the air of Babylon governorate that resulted generally from vehicles exhausts in addition to industrial and human activities.Vehicles number in Babylon governorate increased significantly after year 2003 that resulted with increase in lead emissions into the air.Measurement of lead emissions was done in seven stations distributed randomly in Babylon governorate. These stations where located in Industrial (Al-Sena'ay) Quarter, 60 street (near to Babylon sewer directorate), 40 Street (near to the first intersection), Al-Hashmia city, Al-Mahaweel city, , Al- Musayab city in addition to another station in Sayd Idris village belong to Abugharaq district (Agricultural station for comparison). The measured concentrations in these stations were compared with the standard limits of Environmental Protection Agency EPA (2 μg /m3). The results of this study showed that the average of lead concentrations ,in Babylon governorate during year 2010, was (3.13 μg/m3) which was greater than standard limits (2 μg/m3). The maximum concentration of lead was (6.41 μg / m3) recorded in the Industrial (Al-Sena'ay) Quarter during April month, while the minimum concentrations was (0.36 μg / m3) recorded in the agricultural station (Abugharaq) during December month.
Abstract: Carbon disulfide is widely used for the production of
viscose rayon, rubber, and other organic materials and it is a
feedstock for the synthesis of sulfuric acid. The objective of this
paper is to analyze possibilities for efficient production of CS2 from
sour natural gas reformation (H2SMR) (2H2S+CH4 =CS2 +4H2) .
Also, the effect of H2S to CH4 feed ratio and reaction temperature on
carbon disulfide production is investigated numerically in a
reforming reactor. The chemical reaction model is based on an
assumed Probability Density Function (PDF) parameterized by the
mean and variance of mixture fraction and β-PDF shape. The results
show that the major factors influencing CS2 production are reactor
temperature. The yield of carbon disulfide increases with increasing
H2S to CH4 feed gas ratio (H2S/CH4≤4). Also the yield of C(s)
increases with increasing temperature until the temperature reaches
to 1000°K, and then due to increase of CS2 production and
consumption of C(s), yield of C(s) drops with further increase in the
temperature. The predicted CH4 and H2S conversion and yield of
carbon disulfide are in good agreement with result of Huang and TRaissi.
Abstract: Matrix metalloproteinase-3 (MMP3) is key member
of the MMP family, and is known to be present in coronary
atherosclerotic. Several studies have demonstrated that MMP-3
5A/6A polymorphism modify each transcriptional activity in allele
specific manner. We hypothesized that this polymorphism may play
a role as risk factor for development of coronary stenosis. The aim of
our study was to estimate MMP-3 (5A/6A) gene polymorphism on
interindividual variability in risk for coronary stenosis in an Iranian
population.DNA was extracted from white blood cells and genotypes
were obtained from coronary stenosis cases (n=95) and controls
(n=100) by PCR (polymerase chain reaction) and restriction
fragment length polymorphism techniques. Significant differences
between cases and controls were observed for MMP3 genotype
frequencies (X2=199.305, p< 0.001); the 6A allele was less
frequently seen in the control group, compared to the disease group
(85.79 vs. 78%, 6A/6A+5A/6A vs. 5A/5A, P≤0.001). These data
imply the involvement of -1612 5A/6A polymorphism in coronary
stenosis, and suggest that probably the 6A/6A MMP-3 genotype is a
genetic susceptibility factor for coronary stenosis.
Abstract: The present paper was concerned primarily with the
analysis, simulation of the air flow and thermal patterns in a lecture
room. The paper is devoted to numerically investigate the influence
of location and number of ventilation and air conditioning supply and
extracts openings on air flow properties in a lecture room. The work
focuses on air flow patterns, thermal behaviour in lecture room where
large number of students. The effectiveness of an air flow system is
commonly assessed by the successful removal of sensible and latent
loads from occupants with additional of attaining air pollutant at a
prescribed level to attain the human thermal comfort conditions and
to improve the indoor air quality; this is the main target during the
present paper. The study is carried out using computational fluid
dynamics (CFD) simulation techniques as embedded in the
commercially available CFD code (FLUENT 6.2). The CFD
modelling techniques solved the continuity, momentum and energy
conservation equations in addition to standard k – ε model equations
for turbulence closure.
Throughout the investigations, numerical validation is carried out by
way of comparisons of numerical and experimental results. Good
agreement is found among both predictions.
Abstract: Addition of milli or micro sized particles to the heat
transfer fluid is one of the many techniques employed for improving
heat transfer rate. Though this looks simple, this method has
practical problems such as high pressure loss, clogging and erosion
of the material of construction. These problems can be overcome by
using nanofluids, which is a dispersion of nanosized particles in a
base fluid. Nanoparticles increase the thermal conductivity of the
base fluid manifold which in turn increases the heat transfer rate.
Nanoparticles also increase the viscosity of the basefluid resulting in
higher pressure drop for the nanofluid compared to the base fluid. So
it is imperative that the Reynolds number (Re) and the volume
fraction have to be optimum for better thermal hydraulic
effectiveness. In this work, the heat transfer enhancement using
aluminium oxide nanofluid using low and high volume fraction
nanofluids in turbulent pipe flow with constant wall temperature has
been studied by computational fluid dynamic modeling of the
nanofluid flow adopting the single phase approach. Nanofluid, up till
a volume fraction of 1% is found to be an effective heat transfer
enhancement technique. The Nusselt number (Nu) and friction factor
predictions for the low volume fractions (i.e. 0.02%, 0.1 and 0.5%)
agree very well with the experimental values of Sundar and Sharma
(2010). While, predictions for the high volume fraction nanofluids
(i.e. 1%, 4% and 6%) are found to have reasonable agreement with
both experimental and numerical results available in the literature.
So the computationally inexpensive single phase approach can be
used for heat transfer and pressure drop prediction of new nanofluids.