Abstract: Diesel Engines emit complex mixtures of inorganic
and organic compounds in the form of both solid and vapour phase
particles. Most of the particulates released are ultrafine nanoparticles
which are detrimental to human health and can easily enter the body
by respiration. The emissions standards on particulate matter release
from diesel engines are constantly upgraded within the European
Union and with future regulations based on the particles numbers
released instead of merely mass, the need for effective aftertreatment
devices will increase. Standard particulate filters in the form of wall
flow filters can have problems with high soot accumulation,
producing a large exhaust backpressure. A potential solution would
be to combine the standard filter with a flow through filter to reduce
the load on the wall flow filter. In this paper soot particle trapping has
been simulated in different continuous flow filters of monolithic
structure including the use of promoters, at laminar flow conditions.
An Euler Lagrange model, the discrete phase model in Ansys used
with user defined functions for forces acting on particles. A method
to quickly screen trapping of 5 nm and 10 nm particles in different
catalysts designs with tracers was also developed.
Simulations of square duct monoliths with promoters show that the
strength of the vortices produced are not enough to give a high
amount of particle deposition on the catalyst walls. The smallest
particles in the simulations, 5 and 10 nm particles were trapped to a
higher extent, than larger particles up to 1000 nm, in all studied
geometries with the predominant deposition mechanism being
Brownian diffusion. The comparison of the different filters designed
with a wall flow filter does show that the options for altering a design
of a flow through filter, without imposing a too large pressure drop
penalty are good.
Abstract: A new approach to predict the 3D structures of proteins by combining the knowledge-based method and Molecular Dynamics Simulation is presented on the chicken villin headpiece subdomain (HP-36). Comparative modeling is employed as the knowledge-based method to predict the core region (Ala9-Asn28) of the protein while the remaining residues are built as extended regions (Met1-Lys8; Leu29-Phe36) which then further refined using Molecular Dynamics Simulation for 120 ns. Since the core region is built based on a high sequence identity to the template (65%) resulting in RMSD of 1.39 Å from the native, it is believed that this well-developed core region can act as a 'nucleation center' for subsequent rapid downhill folding. Results also demonstrate that the formation of the non-native contact which tends to hamper folding rate can be avoided. The best 3D model that exhibits most of the native characteristics is identified using clustering method which then further ranked based on the conformational free energies. It is found that the backbone RMSD of the best model compared to the NMR-MDavg is 1.01 Å and 3.53 Å, for the core region and the complete protein, respectively. In addition to this, the conformational free energy of the best model is lower by 5.85 kcal/mol as compared to the NMR-MDavg. This structure prediction protocol is shown to be effective in predicting the 3D structure of small globular protein with a considerable accuracy in much shorter time compared to the conventional Molecular Dynamics simulation alone.
Abstract: Advances in processors architecture, such as multicore,
increase the size of complexity of parallel computer systems.
With multi-core architecture there are different parallel languages
that can be used to run parallel programs. One of these languages is
OpenMP which embedded in C/Cµ or FORTRAN. Because of this
new architecture and the complexity, it is very important to evaluate
the performance of OpenMP constructs, kernels, and application
program on multi-core systems. Performance is the activity of
collecting the information about the execution characteristics of a
program. Performance tools consists of at least three interfacing
software layers, including instrumentation, measurement, and
analysis. The instrumentation layer defines the measured
performance events. The measurement layer determines what
performance event is actually captured and how it is measured by the
tool. The analysis layer processes the performance data and
summarizes it into a form that can be displayed in performance tools.
In this paper, a number of OpenMP performance tools are surveyed,
explaining how each is used to collect, analyse, and display data
collection.
Abstract: Increased energy demand and the concern about
environment friendly technology, renewable bio-fuels are better
alternative to petroleum products. In the present study linseed oil was
used as alternative source for diesel engine fuel and the results were
compared with baseline data of neat diesel. Performance parameters
such as brake thermal efficiency (BTE) and brake specific fuel
consumption (BSFC) and emissions parameters such as CO,
unburned hydro carbon (UBHC), NOx, CO2 and exhaust temperature
were compared. BTE of the engine was lower and BSFC was higher
when the engine was fueled with Linseed oil compared to diesel fuel.
Emission characteristics are better than diesel fuel. NOx formation by
using linseed oil during the experiment was lower than diesel fuel.
Linseed oil is non edible oil, so it can be used as an extender of diesel
fuel energy source for small and medium energy needs.
Abstract: There is a renewed interest in land use transport integration as a means of achieving sustainable accessibility. Such accessibility requires designing more than simply the transport network; it also requires attention to place (built form). Transitoriented development would appear to capture many of the criteria deemed important in land use transport integration. In Perth, Australia, there have been planning policies for the past 20 years requiring transit-oriented development around railway stations throughout the metropolitan area. While the policy intent, particularly at the State level, is clear the implementation of policy has been fairly ineffective. The first part of this paper provides an examination of state and local government planning and transport policies, evaluating them using a set of land use transport integration criteria considered all encompassing. This provides some insight into the extent of state and local government capacity to deliver land use transport integration. The second part of this paper examines the extent of implementation by examining existing and proposed land use around station precincts throughout metropolitan Perth. The findings of this research suggest that the capacity of state and local government to deliver land use transport integration is reasonable in a planning policy sense. Implementation, despite long policy lead times, has been lacking. It appears to be more effective where local planning controls have been suspended with new redevelopment authorities given powers to develop land around railway stations.
Abstract: Nowadays, keyless entry systems are widely adopted
for vehicle immobilizer systems due to both advantages of security and
convenience. Keyless entry systems could overcome brute-force key
guessing attack, statistics attack and masquerade attack, however,
they can't prevent from thieves stealing behavior. In this paper, we
proposed a new architecture try to improve the existent flaws. The
integration of the keyless entry system and the fingerprint
identification technology is more suitable to implement on the
portable transponder to achieve higher security needs. We also adopt
and modify AES security protocol for life expectancy and security of
the portable transponder. In addition, the identification of a driver's
fingerprint makes the service of automatic reinstatement of a driver's
preferences become possible. Our design can satisfy not only the three
kinds of previous illegal attacks, but also the stealing situation.
Furthermore, many practical factors, such as costs, life expectancy and
performance, have been well considered in the design of portable
transponder.
Abstract: Celiac disease is an immune-mediated disease, triggered in genetically susceptible individuals by ingested gluten from wheat, rye, barley and other closely related cereal grains. The only effective treatment is a strict gluten free diet for life. Latvian producers do not offer gluten-free products. In this research, use of extruded maize flour was tested for substituting rice, maize or buckwheat flour in gluten-free bread formulations at different ratios. Also the influence of extruded maize flour on the quality parameters of gluten-free bread was investigated. The aim of research was to study the influence of extruded maize flour on gluten-free bread quality. Addition of extruded maize flour affect gluten-free bread crumb color, structure of crumb, weight loss and dry off of bread.
Abstract: The purpose of this paper is to present the design and
instrumentation of a new benchmark multivariable nonlinear control
laboratory. The mathematical model of this system may be used to
test the applicability and performance of various nonlinear control
procedures. The system is a two degree-of-freedom robotic arm with
soft and hard (discontinuous) nonlinear terms. Two novel
mechanisms are designed to allow the implementation of adjustable
Coulomb friction and backlash.
Abstract: This paper will present the implementation of QoS
policy based system by utilizing rules on Access Control List (ACL)
over Layer 3 (L3) switch. Also presented is the architecture on that
implementation; the tools being used and the result were gathered.
The system architecture has an ability to control ACL rules which are
installed inside an external L3 switch. ACL rules used to instruct the
way of access control being executed, in order to entertain all traffics
through that particular switch. The main advantage of using this
approach is that the single point of failure could be prevented when
there are any changes on ACL rules inside L3 switches. Another
advantage is that the agent could instruct ACL rules automatically
straight away based on the changes occur on policy database without
configuring them one by one. Other than that, when QoS policy
based system was implemented in distributed environment, the
monitoring process can be synchronized easily due to the automate
process running by agent over external policy devices.
Abstract: The periodic mixed convection of a water-copper
nanofluid inside a rectangular cavity with aspect ratio of 3 is
investigated numerically. The temperature of the bottom wall of the
cavity is assumed greater than the temperature of the top lid which
oscillates horizontally with the velocity defined as u = u0 sin (ω t).
The effects of Richardson number, Ri, and volume fraction of
nanoparticles on the flow and thermal behavior of the nanofluid are
investigated. Velocity and temperature profiles, streamlines and
isotherms are presented. It is observed that when Ri < 1, heat transfer
rate is much greater than when Ri > 1. The higher value of Ri
corresponds to a lower value of the amplitude of the oscillation of
Num in the steady periodic state. Moreover, increasing the volume
fraction of the nanoparticles increases the heat transfer rate.
Abstract: The present paper is a case study about exploitation of
Kheir Abad river (Khoozestan, Iran) water resources and the
problems caused by river sediments around the pumping stations.
The weak points and strong points of Boneh Basht pumping station
have been studied by experienced experts, work teams, and
consulting engineers and technical and executive solutions have been
suggested. Therefore, the suggestions of this article are based on the
performed studies and are proposed in order to evaluate the logical
solutions.
Rather complicated processes resulting from the interaction of
water flows and sediments observed at Boneh Basht pumping station
occur at other pumping stations in almost the same way. Therefore,
Boneh Basht pumping station can be selected as a sample (pilot) and
up-to-date theories and experiences can be applied to this station and
the results can be offered to other stations.
Abstract: Despite the fact that Knowledge Sharing (KS) is very important, we found only little discussion about the reasons why people have the willingness to share knowledge at such platform even though there is no immediate benefit to the persons who contribute knowledge in it. The aim of this study is to develop an integrative understanding of the factors that support or inhibit individuals- knowledge sharing intentions in virtual communities and to find whether habit would generate people-s willingness to be involved. We apply Social Capital Theory (SCT), and we also add two dimensions for discussion: member incentive and habitual domain (HD). This research assembles the questionnaire from individuals who have experienced knowledge sharing in virtual communities, and applies survey and Structural Equation Model (SEM) to analyze the results from the questionnaires. Finally, results confirm that individuals are willing to share knowledge in virtual communities: (1) if they consider reciprocity, centrality, and have longer tenure in their field, and enjoy helping. (2) if they have the habit of sharing knowledge. This study is useful for the developers of virtual communities to insight into knowledge sharing in cyberspace.
Abstract: In this study the extracts of the Iraqi herb Tribulus
terrestris (Al-Hassage or Al-Kutub) was done by using of polar and
non polar solvents, then the biological activity of these extractants
was studied in three fields, First, the antibacterial activity (in vitro)
on gram positive bacteria (Staphylococcus aureus), and gram
negative bacteria (E. coli, Proteus vulgaris, Pseudomonas
aerugiuosa, and Klebsiella), all extracts showed considerable activity
against all bacteria. Second, the effect of extracts on free serum
testosterone level in male mice (in vivo), the alcoholic, and
acetonitrilic extracts showed significant (P < 0.05) increase in free
serum testosterone level, and we found that the extracts contained
compounds with less genotoxic effects in mice germ cells. 3rd, was to
study the effect of methanolic extract of T. terrestris in diabetes
management.
Abstract: This paper analysis performance of disbursement
procedure of public works project in Thailand. The results of
research were summarised based on contracts, submitted invoice,
inspection dated, copies of disbursement dated between client and
their main contractor and interviewed with persons involved in
central and local government projects during 1994-2008 in Thailand.
The data collection was to investigate the disbursement procedure
related to performance in disbursement during construction period
(Planned duration of contract against Actual execution date in each
month). A graphical presentation of a duration analysis of the
projects illustrated significant disbursement formation in each
project. It was established that the shortage of staff, the financial
stability of clients, bureaucratic, method of disbursement and
economics situation has play major role on performance of
disbursement to their main contractors.
Abstract: In this paper, a new automated methodology to detect the optic disc (OD) automatically in retinal images from patients with risk of being affected by Diabetic Retinopathy (DR) and Macular Edema (ME) is presented. The detection procedure comprises two independent methodologies. On one hand, a location methodology obtains a pixel that belongs to the OD using image contrast analysis and structure filtering techniques and, on the other hand, a boundary segmentation methodology estimates a circular approximation of the OD boundary by applying mathematical morphology, edge detection techniques and the Circular Hough Transform. The methodologies were tested on a set of 1200 images composed of 229 retinographies from patients affected by DR with risk of ME, 431 with DR and no risk of ME and 540 images of healthy retinas. The location methodology obtained 98.83% success rate, whereas the OD boundary segmentation methodology obtained good circular OD boundary approximation in 94.58% of cases. The average computational time measured over the total set was 1.67 seconds for OD location and 5.78 seconds for OD boundary segmentation.
Abstract: This paper predicts the effect of the user-s hand-hold
position on the Total Isotropic Sensitivity (TIS) of GSM900/1800
mobile phone antennas of realistic in-use conditions, where different
semi-realistic mobile phone models, i.e., candy bar and clamshell, as
well as different antenna types, i.e., external and internal, are
simulated using a FDTD-based platform. A semi-realistic hand model
consisting of three tissues and the SAM head are used in simulations.
The results show a considerable impact on TIS of the adopted mobile
phone models owing to the user-s hand presence at different
positions, where a maximum level of TIS is obtained while grasping
the upper part of the mobile phone against head. Maximum TIS
levels are recorded in talk position for mobile phones with external
antenna and maximum differences in TIS levels due to the hand-hold
alteration are recorded for clamshell-type phones.
Abstract: In this paper, different nonlinear dynamics analysis techniques are employed to unveil the rich nonlinear phenomena of the electromagnetic system. In particular, bifurcation diagrams, time responses, phase portraits, Poincare maps, power spectrum analysis, and the construction of basins of attraction are all powerful and effective tools for nonlinear dynamics problems. We also employ the method of Lyapunov exponents to show the occurrence of chaotic motion and to verify those numerical simulation results. Finally, two cases of a chaotic electromagnetic system being effectively controlled by a reference signal or being synchronized to another nonlinear electromagnetic system are presented.
Abstract: In this work we report the recent progresses that have been achieved by our group in the last half decade on the field of computational proteomics. Specifically, we discuss the application of Molecular Dynamics Simulations and Electronic Structure Calculations in drug design, in the clarification of the structural and dynamic properties of proteins and enzymes and in the understanding of the catalytic and inhibition mechanism of cancer-related enzymes. A set of examples illustrate the concepts and help to introduce the reader into this important and fast moving field.
Abstract: Dehydration behavior gives a hint about thermal properties of materials. It is important for the usage areas and transportation of minerals. Magnesium borates can be used as additive materials in areas such as in the production of superconducting materials, in the composition of detergents, due to the content of boron in the friction-reducing additives in oils and insulating coating compositions due to their good mechanic and thermal properties.
In this study, thermal dehydration behavior of admontite (MgO(B2O3)3.7(H2O)), which is a kind of magnesium borate mineral, is experimented by microwave energy at 360W. Structure of admontite is suitable for the investigation of dehydration behavior by microwave because of its seven moles of crystal water. It is seen that admontite lost its 28.7% of weight at the end of the 120 minutes heating in microwave furnace.
Abstract: In the context of introduction of deregulatory policy measures and subsequent wave of mergers and acquisitions (M&A) in Indian corporate sector since 1991, the present paper attempts to examine the welfare implications of this wave. It is found that M&A do not have any significant impact on consumers- welfare. Instead, consumers- welfare is significantly influenced by exports intensity, imports intensity, advertising intensity, technology related efforts, and past profitability of the firms. While the industries with higher exports orientation or greater product differentiation or better financial performance experience greater loss in consumers- welfare, it is less in the industries with greater competition from imports or better technology. Hence, the wave of M&A in Indian manufacturing sector in the post-liberalization era may not be a matter of serious concern from consumers- welfare point of view. Instead, in many cases, M&A can help the firms in consolidating their business and enhancing competitiveness, and this may benefit the consumers in the form of greater efficiency and lower prices.