Abstract: This paper reports the fatigue crack growth behaviour
of gas tungsten arc, electron beam and laser beam welded Ti-6Al-4V
titanium alloy. Centre cracked tensile specimens were prepared to
evaluate the fatigue crack growth behaviour. A 100kN servo
hydraulic controlled fatigue testing machine was used under constant
amplitude uniaxial tensile load (stress ratio of 0.1 and frequency of
10 Hz). Crack growth curves were plotted and crack growth
parameters (exponent and intercept) were evaluated. Critical and
threshold stress intensity factor ranges were also evaluated. Fatigue
crack growth behaviour of welds was correlated with mechanical
properties and microstructural characteristics of welds. Of the three
joints, the joint fabricated by laser beam welding exhibited higher
fatigue crack growth resistance due to the presence of fine lamellar
microstructure in the weld metal.
Abstract: Land degradation is of concern in many countries. People more and more must address the problems associated with the degradation of soil properties due to man. Increasingly, organic soil amendments, such as compost are being examined for their potential use in soil restoration and for preventing soil erosion. In the Czech Republic, compost is the most used to improve soil structure and increase the content of soil organic matter. Land reclamation / restoration is one of the ways to evaluate industrially produced compost because Czech farmers are not willing to use compost as organic fertilizer. The most common use of reclamation substrates in the Czech Republic is for the rehabilitation of landfills and contaminated sites.
This paper deals with the influence of reclamation substrates (RS) with different proportions of compost and sand on selected soil properties–chemical characteristics, nitrogen bioavailability, leaching of mineral nitrogen, respiration activity and plant biomass production. Chemical properties vary proportionally with addition of compost and sand to the control variant (topsoil). The highest differences between the variants were recorded in leaching of mineral nitrogen (varies from 1.36mg dm-3 in C to 9.09mg dm-3). Addition of compost to soil improves conditions for plant growth in comparison with soil alone. However, too high addition of compost may have adverse effects on plant growth. In addition, high proportion of compost increases leaching of mineral N. Therefore, mixture of 70% of soil with 10% of compost and 20% of sand may be recommended as optimal composition of RS.
Abstract: This paper presents an algebraic approach to optimize
queries in domain-specific database management system
for protein structure data. The approach involves the introduction of
several protein structure specific algebraic operators to query the
complex data stored in an object-oriented database system. The
Protein Algebra provides an extensible set of high-level Genomic
Data Types and Protein Data Types along with a comprehensive
collection of appropriate genomic and protein functions. The paper
also presents a query translator that converts high-level query
specifications in algebra into low-level query specifications in
Protein-QL, a query language designed to query protein structure
data. The query transformation process uses a Protein Ontology that
serves the purpose of a dictionary.
Abstract: This paper study the segmented split capacitor
Digital-to-Analog Converter (DAC) implemented in a differentialtype
12-bit Successive Approximation Analog-to-Digital Converter
(SA-ADC). The series capacitance split array method employed as it
reduced the total area of the capacitors required for high resolution
DACs. A 12-bit regular binary array structure requires 2049 unit
capacitors (Cs) while the split array needs 127 unit Cs. These results
in the reduction of the total capacitance and power consumption of
the series split array architectures as to regular binary-weighted
structures. The paper will show the 12-bit DAC series split capacitor
with 4-bit thermometer coded DAC architectures as well as the
simulation and measured results.
Abstract: Using Turkish data, in this study it is investigated that
whether a firm’s ownership structure has an impact on its stock
prices after the crisis. A linear regression model is conducted on the
data of non-financial firms that are trading in Istanbul Stock
Exchange 100 Index (ISE 100) index. The findings show that, all
explanatory variables such as inside ownership, largest ownership,
concentrated ownership, foreign shareholders, family controlled and
dispersed ownership are not very important to explain stock prices
after the crisis. Family controlled firms and concentrated ownership
is positively related to stock price, dispersed ownership, largest
ownership, foreign shareholders, and inside ownership structures
have negative interaction between stock prices, but because of the p
value is not under the value of 0.05 this relation is not significant. In
addition, the analysis shows that, the shares of firms that have inside,
largest and dispersed ownership structure are outperform comparing
with the other firms. Furthermore, ownership concentrated firms
outperform to family controlled firms.
Abstract: Eukaryotic protein-coding genes are interrupted by spliceosomal introns, which are removed from the RNA transcripts before translation into a protein. The exon-intron structures of different eukaryotic species are quite different from each other, and the evolution of such structures raises many questions. We try to address some of these questions using statistical analysis of whole genomes. We go through all the protein-coding genes in a genome and study correlations between the net length of all the exons in a gene, the number of the exons, and the average length of an exon. We also take average values of these features for each chromosome and study correlations between those averages on the chromosomal level. Our data show universal features of exon-intron structures common to animals, plants, and protists (specifically, Arabidopsis thaliana, Caenorhabditis elegans, Drosophila melanogaster, Cryptococcus neoformans, Homo sapiens, Mus musculus, Oryza sativa, and Plasmodium falciparum). We have verified linear correlation between the number of exons in a gene and the length of a protein coded by the gene, while the protein length increases in proportion to the number of exons. On the other hand, the average length of an exon always decreases with the number of exons. Finally, chromosome clustering based on average chromosome properties and parameters of linear regression between the number of exons in a gene and the net length of those exons demonstrates that these average chromosome properties are genome-specific features.
Abstract: This work describes the aerodynamic characteristic for
aircraft wing model with and without bird feather like winglet. The
aerofoil used to construct the whole structure is NACA 653-218
Rectangular wing and this aerofoil has been used to compare the
result with previous research using winglet. The model of the
rectangular wing with bird feather like winglet has been fabricated
using polystyrene before design using CATIA P3 V5R13 software
and finally fabricated in wood. The experimental analysis for the
aerodynamic characteristic for rectangular wing without winglet,
wing with horizontal winglet and wing with 60 degree inclination
winglet for Reynolds number 1.66×105, 2.08×105 and 2.50×105 have
been carried out in open loop low speed wind tunnel at the
Aerodynamics laboratory in Universiti Putra Malaysia. The
experimental result shows 25-30 % reduction in drag coefficient and
10-20 % increase in lift coefficient by using bird feather like winglet
for angle of attack of 8 degree.
Abstract: Main Memory Database systems (MMDB) store their
data in main physical memory and provide very high-speed access.
Conventional database systems are optimized for the particular
characteristics of disk storage mechanisms. Memory resident
systems, on the other hand, use different optimizations to structure
and organize data, as well as to make it reliable.
This paper provides a brief overview on MMDBs and one of the
memory resident systems named FastDB and compares the
processing time of this system with a typical disc resident database
based on the results of the implementation of TPC benchmarks
environment on both.
Abstract: Faults in a network may take various forms such as hardware/software errors, vertex/edge faults, etc. Folded hypercube is a well-known variation of the hypercube structure and can be constructed from a hypercube by adding a link to every pair of nodes with complementary addresses. Let FFv (respectively, FFe) be the set of faulty nodes (respectively, faulty links) in an n-dimensional folded hypercube FQn. Hsieh et al. have shown that FQn - FFv - FFe for n ≥ 3 contains a fault-free cycle of length at least 2n -2|FFv|, under the constraints that (1) |FFv| + |FFe| ≤ 2n - 4 and (2) every node in FQn is incident to at least two fault-free links. In this paper, we further consider the constraints |FFv| + |FFe| ≤ 2n - 3. We prove that FQn - FFv - FFe for n ≥ 5 still has a fault-free cycle of length at least 2n - 2|FFv|, under the constraints : (1) |FFv| + |FFe| ≤ 2n - 3, (2) |FFe| ≥ n + 2, and (3) every vertex is still incident with at least two links.
Abstract: Crosstalk is the major limiting issue in very high bit-rate digital subscriber line (VDSL) systems in terms of bit-rate or service coverage. At the central office side, joint signal processing accompanied by appropriate power allocation enables complex multiuser processors to provide near capacity rates. Unfortunately complexity grows with the square of the number of lines within a binder, so by taking into account that there are only a few dominant crosstalkers who contribute to main part of crosstalk power, the canceller structure can be simplified which resulted in a much lower run-time complexity. In this paper, a multiuser power control scheme, namely iterative waterfilling, is combined with previously proposed partial crosstalk cancellation approaches to demonstrate the best ever achieved performance which is verified by simulation results.
Abstract: The characterisation of agro-wastes fibres for composite applications from Nigeria using X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM) has been done. Fibres extracted from groundnut shell, coconut husk, rice husk, palm fruit bunch and palm fruit stalk are processed using two novel cellulose fibre production methods developed by the authors. Cellulose apparent crystallinity calculated using the deconvolution of the diffractometer trace shows that the amorphous portion of cellulose was permeable to hydrolysis yielding high crystallinity after treatment. All diffratograms show typical cellulose structure with well-defined 110, 200 and 040 peaks. Palm fruit fibres had the highest 200 crystalline cellulose peaks compared to others and it is an indication of rich cellulose content. Surface examination of the resulting fibres using SEM indicates the presence of regular cellulose network structure with some agglomerated laminated layer of thin leaves of cellulose microfibrils. The surfaces were relatively smooth indicating the removal of hemicellulose, lignin and pectin.
Abstract: This paper studies ruin probabilities in two discrete-time
risk models with premiums, claims and rates of interest modelled by
three autoregressive moving average processes. Generalized Lundberg
inequalities for ruin probabilities are derived by using recursive
technique. A numerical example is given to illustrate the applications
of these probability inequalities.
Abstract: In this paper, the action research driven design of a
context relevant, developmental peer review of teaching model, its
implementation strategy and its impact at an Australian university is
presented. PRO-Teaching realizes an innovative process that
triangulates contemporaneous teaching quality data from a range of
stakeholders including students, discipline academics, learning and
teaching expert academics, and teacher reflection to create reliable
evidence of teaching quality. Data collected over multiple classroom
observations allows objective reporting on development differentials
in constructive alignment, peer, and student evaluations. Further
innovation is realized in the application of this highly structured
developmental process to provide summative evidence of sufficient
validity to support claims for professional advancement and learning
and teaching awards. Design decision points and contextual triggers
are described within the operating domain. Academics and
developers seeking to introduce structured peer review of teaching
into their organization will find this paper a useful reference.
Abstract: The problem on the conservation programme of the Royal Thai Navy Sea Turtle Nursery, Phang-nga Province, Thailand is high mortality rate of juvenile green sea turtle (Cheloniamydas) on nursing period. So, during May to October 2012, postmortem examinations of juvenile green sea turtle were performed to determine the causes of dead. Fresh tissues of postmortem of 15 juvenile green sea turtles (1-3 months old) were investigated using paraffin section technique. The results showed normal ultrastructure of all tissue organs. These instances reviewed the health and stability of the environments in which juvenile green sea turtles live and concern for the survival rate. The present article also provides guidance for a review of the biology, guidelines for appropriate postmortem tissue, normal histology and sampling collection and procedures. The data also provides information for conservation of this endangered species in term of acknowledging and encouraging people to protect the animals and their habitats in nature.
Abstract: This study examines the influence of information
transparency and corporate governance on purchase directors and
officers liability (D&O) insurance decisions. The results show that
companies with greater information transparency have significant
demand for D&O insurance. Greater transparency in voluntary
disclosures is significantly and positively associated with demand for
insurance, indicating that increasing the degree of information
disclosure reduces information asymmetry for insurers, which
stimulates their willingness to provide greater protection.
Analysis of insured and uninsured subsamples indicates that
uninsured companies have superior corporate governance compared to
insured companies. Although insured companies tend to have weaker
corporate governance structures, they appoint Big 4 firms or industry
experts to compensate for the weakness of their corporate governance.
Empirical results indicate that purchasing D&O insurance can
strengthen external corporate governance and increase companies’
willingness to voluntarily provide more transparent information.
Abstract: Experimental investigation has been carried out
towards understanding the complex fluid dynamics involved in the
interaction of vortical structures with zero pressure gradient boundary
layer. A laminar boundary layer is produced on the flat plate placed
in the water flume and the synthetic jet actuator is deployed on top of
the plate at a definite distance from the leading edge. The synthetic
jet actuator has been designed in such a way that the to and fro
motion of the diaphragm is maneuvered at will by varying the
operating parameters to produce the typical streamwise vortical
structures namely hairpin and tilted vortices. PIV measurements are
made on the streamwise plane normal to the plate to evaluate their
interaction with the near wall fluid.
Abstract: In order to improve the simulation effects of space cold
black environment, this paper described a rectangular channel plate
heat sink. By using fluid mechanics theory and finite element method,
the internal fluid flow and heat transfer in heat sink was numerically
simulated to analyze the impact of channel structural on fluid flow and
heat transfer. The result showed that heat sink temperature uniformity
is well, and the impact of channel structural on the heat sink
temperature uniformity is not significant. The channel depth and
spacing are important factors which affect the fluid flow and heat
transfer in the heat sink. The two factors of heat transfer and resistance
need to be considered comprehensively to determine the optimal flow
structure parameters.
Abstract: In this paper we introduce an efficient solution
method for the Eigen-decomposition of bisymmetric and per
symmetric matrices of symmetric structures. Here we decompose
adjacency and Laplacian matrices of symmetric structures to submatrices
with low dimension for fast and easy calculation of
eigenvalues and eigenvectors. Examples are included to show the
efficiency of the method.
Abstract: Three-dimensional reconstruction of small objects has
been one of the most challenging problems over the last decade.
Computer graphics researchers and photography professionals have
been working on improving 3D reconstruction algorithms to fit the
high demands of various real life applications. Medical sciences,
animation industry, virtual reality, pattern recognition, tourism
industry, and reverse engineering are common fields where 3D
reconstruction of objects plays a vital role. Both lack of accuracy and
high computational cost are the major challenges facing successful
3D reconstruction. Fringe projection has emerged as a promising 3D
reconstruction direction that combines low computational cost to both
high precision and high resolution. It employs digital projection,
structured light systems and phase analysis on fringed pictures.
Research studies have shown that the system has acceptable
performance, and moreover it is insensitive to ambient light.
This paper presents an overview of fringe projection approaches. It
also presents an experimental study and implementation of a simple
fringe projection system. We tested our system using two objects
with different materials and levels of details. Experimental results
have shown that, while our system is simple, it produces acceptable
results.
Abstract: This paper aims to develop a model that assists the
international retailer in selecting the country that maximizes the
degree of fit between the retailer-s goals and the country
characteristics in his initial internationalization move. A two-stage
multi criteria decision model is designed integrating the Analytic
Hierarchy Process (AHP) and Goal Programming. Ethical, cultural,
geographic and economic proximity are identified as the relevant
constructs of the internationalization decision. The constructs are
further structured into sub-factors within analytic hierarchy. The
model helps the retailer to integrate, rank and weigh a number of
hard and soft factors and prioritize the countries accordingly. The
model has been implemented on a Turkish luxury goods retailer who
was planning to internationalize. Actual entry of the specific retailer
in the selected country is a support for the model. Implementation on
a single retailer limits the generalizability of the results; however, the
emphasis of the paper is on construct identification and model
development. The paper enriches the existing literature by proposing
a hybrid multi objective decision model which introduces new soft
dimensions i.e. perceived distance, ethical proximity, humane
orientation to the decision process and facilitates effective decision
making.