Abstract: Modern Society is strongly dependent on a reliable
power supply. The availability of cheap and reliable supply of
electrical energy is an indicator of societal welfare. Uninterrupted
reliable operation of a modern power system depends to a great
extent on reliable and satisfactory performance of insulators under
different environmental conditions. This paper reports result of
natural pollution tests that have been done at sites around city of
Aligarh (India). Flashover voltage per insulation distance (FOVUID)
of porcelain disc insulator for different pH values, ESDD has been
recorded for proper correlation between electrical and chemical
parameters. The pH of the contaminants has been suggested to be an
effective pollution severity indicator and may be used as a diagnostic
parameter for proper maintenance of porcelain insulators.
Abstract: The paper addresses a problem of optimal staffing in
open shop environment. The problem is to determine the optimal
number of operators serving a given number of machines to fulfill the
number of independent operations while minimizing staff idle. Using
a Gantt chart presentation of the problem it is modeled as twodimensional
cutting stock problem. A mixed-integer programming
model is used to get minimal job processing time (makespan) for
fixed number of machines' operators. An algorithm for optimal openshop
staffing is developed based on iterative solving of the
formulated optimization task. The execution of the developed
algorithm provides optimal number of machines' operators in the
sense of minimum staff idle and optimal makespan for that number of
operators. The proposed algorithm is tested numerically for a real life
staffing problem. The testing results show the practical applicability
for similar open shop staffing problems.
Abstract: Recently, content delivery services have grown rapidly
over the Internet. For ASPs (Application Service Provider) providing
content delivery services, P2P architecture is beneficial to reduce
outgoing traffic from content servers. On the other hand, ISPs are
suffering from the increase in P2P traffic. The P2P traffic is
unnecessarily redundant because the same content or the same
fractions of content are transferred through an inter-ISP link several
times. Subscriber ISPs have to pay a transit fee to upstream ISPs based
on the volume of inter-ISP traffic. In order to solve such problems,
several works have been done for the purpose of P2P traffic reduction.
However, these existing works cannot control the traffic volume of a
certain link. In order to solve such an ISP-s operational requirement,
we propose a method to control traffic volume for a link within a
preconfigured upper bound value. We evaluated that the proposed
method works well by conducting a simulation on a 1,000-user scale.
We confirm that the traffic volume could be controlled at a lower level
than the upper bound for all evaluated conditions. Moreover, our
method could control the traffic volume at 98.95% link usage against
the target value.
Abstract: The machining of Carbon Fiber Reinforced Plastics
has come to constitute a significant challenge for many fields of
industry. The resulting surface finish of machined parts is of primary
concern for several reasons, including contact quality and impact on
the assembly. Therefore, the characterization and prediction of
roughness based on machining parameters are crucial for costeffective
operations. In this study, a PCD tool comprised of two
straight flutes was used to trim 32-ply carbon fiber laminates in a bid
to analyze the effects of the feed rate and the cutting speed on the
surface roughness. The results show that while the speed has but a
slight impact on the surface finish, the feed rate for its part affects it
strongly. A detailed study was also conducted on the effect of fiber
orientation on surface roughness, for quasi-isotropic laminates used
in aerospace. The resulting roughness profiles for the four-ply
orientation lay-up were compared, and it was found that fiber angle is
a critical parameter relating to surface roughness. One of the four
orientations studied led to very poor surface finishes, and
characteristic roughness profiles were identified and found to only
relate to the ply orientations of multilayer carbon fiber laminates.
Abstract: Gurus of the Classical Management School (like
Taylor, Fayol and Ford) had an opinion that work must be delegated
to the individual and the individual has to be instructed, his work
assessed and paid based on individual performance. The theories of
the Human Relations School have changed this mentality regarding
the concept of groups. They came to the conclusion that the influence
of groups greatly affects the behaviour and performance of its
members.
Group theories today are characterized by problem-solving teams
and self-managing groups authorized to make decisions and execute;
professional communities also play an important role during the
operation of knowledge management systems.
In this theoretical research we try to find answers to a question:
what kind of characteristics (professional competencies, personal
features, etc.) a successful team needs to manage a change to operate
a knowledge management system step by step.
Abstract: A new and highly efficient architecture for elliptic curve scalar point multiplication which is optimized for a binary field recommended by NIST and is well-suited for elliptic curve cryptographic (ECC) applications is presented. To achieve the maximum architectural and timing improvements we have reorganized and reordered the critical path of the Lopez-Dahab scalar point multiplication architecture such that logic structures are implemented in parallel and operations in the critical path are diverted to noncritical paths. With G=41, the proposed design is capable of performing a field multiplication over the extension field with degree 163 in 11.92 s with the maximum achievable frequency of 251 MHz on Xilinx Virtex-4 (XC4VLX200) while 22% of the chip area is occupied, where G is the digit size of the underlying digit-serial finite field multiplier.
Abstract: As the world changes more rapidly, the demand for update information for resource management, environment monitoring, planning are increasing exponentially. Integration of Remote Sensing with GIS technology will significantly promote the ability for addressing these concerns. This paper presents an alternative way of update GIS applications using image processing and high resolution images. We show a method of high-resolution image segmentation using graphs and morphological operations, where a preprocessing step (watershed operation) is required. A morphological process is then applied using the opening and closing operations. After this segmentation we can extract significant cartographic elements such as urban areas, streets or green areas. The result of this segmentation and this extraction is then used to update GIS applications. Some examples are shown using aerial photography.
Abstract: Several optimization algorithms specifically applied to
the problem of Operation Planning of Hydrothermal Power Systems
have been developed and are used. Although providing solutions to
various problems encountered, these algorithms have some
weaknesses, difficulties in convergence, simplification of the original
formulation of the problem, or owing to the complexity of the
objective function. Thus, this paper presents the development of a
computational tool for solving optimization problem identified and to
provide the User an easy handling. Adopted as intelligent
optimization technique, Genetic Algorithms and programming
language Java. First made the modeling of the chromosomes, then
implemented the function assessment of the problem and the
operators involved, and finally the drafting of the graphical interfaces
for access to the User. The program has managed to relate a coherent
performance in problem resolution without the need for
simplification of the calculations together with the ease of
manipulating the parameters of simulation and visualization of output
results.
Abstract: This study suggests how an order-receiving company
can avoid disclosing schedule information on unit tasks to the
order-placing company when carrying out a collaborative project on
the value chain in an order-oriented industry. Specifically, it suggests
methods for keeping schedule information confidential, and
categorizes potential situations by inter-task dependency. Lastly, an
approach to select the most optimal non-disclosure method is
discussed. With the methods for not disclosing work-related
information suggested in the study, order-receiving companies can
logically deal with political issues relating to the question of whether
or not to disclose information upon the execution of a collaborative
project in cooperation with an order-placing firm. Moreover,
order-placing companies can monitor undistorted information, while
respecting the legitimate rights of an order-receiving company.
Therefore, it is fair to say that the suggestions made in this study will
contribute to the smooth operation of collaborative intercompany
projects.
Abstract: Due to their high power-to-weight ratio and low cost, pneumatic actuators are attractive for robotics and automation applications; however, achieving fast and accurate control of their position have been known as a complex control problem. The paper presents a methodology for obtaining controllers that achieve high position accuracy and preserve the closed-loop characteristics over a broad operating range. Experimentation with a number of conventional (or "classical") three-term controllers shows that, as repeated operations accumulate, the characteristics of the pneumatic actuator change requiring frequent re-tuning of the controller parameters (PID gains). Furthermore, three-term controllers are found to perform poorly in recovering the closed-loop system after the application of load or other external disturbances. The key reason for these problems lies in the non-linear exchange of energy inside the cylinder relating, in particular, to the complex friction forces that develop on the piston-wall interface. In order to overcome this problem but still remain within the boundaries of classical control methods, we designed an auto selective classicaql controller so that the system performance would benefit from all three control gains (KP, Kd, Ki) according to system requirements and the characteristics of each type of controller. This challenging experimentation took place for consistent performance in the face of modelling imprecision and disturbances. In the work presented, a selective PID controller is presented for an experimental rig comprising an air cylinder driven by a variable-opening pneumatic valve and equipped with position and pressure sensors. The paper reports on tests carried out to investigate the capability of this specific controller to achieve consistent control performance under, repeated operations and other changes in operating conditions.
Abstract: This paper, a simple continuous conduction mode (CCM) pulse-width-modulated (PWM) controller for high power factor boost converters is introduced. The duty ratios were obtained by the comparison of a sensed signal from inductor current or switch current and a negative slope ramp carrier waveform in each switching period. Due to the proposed control requires only the inductor current or switch current sensor and the output voltage sensor, its circuit implementation was very simple. To verify the proposed control, the circuit experimentation of a 350 W boost converter with the proposed control was applied. From the results, the input current waveform was shaped to be closely sinusoidal, implying high power factor and low harmonics.
Abstract: Transient Stability is an important issue in power systems planning, operation and extension. The objective of transient stability analysis problem is not satisfied with mere transient instability detection or evaluation and it is most important to complement it by defining fast and efficient control measures in order to ensure system security. This paper presents a new Fuzzy Support Vector Machines (FSVM) to investigate the stability status of power systems and a modified generation rescheduling scheme to bring back the identified unstable cases to a more economical and stable operating point. FSVM improves the traditional SVM (Support Vector Machines) by adding fuzzy membership to each training sample to indicate the degree of membership of this sample to different classes. The preventive control based on economic generator rescheduling avoids the instability of the power systems with minimum change in operating cost under disturbed conditions. Numerical results on the New England 39 bus test system show the effectiveness of the proposed method.
Abstract: In the modern manufacturing systems, the use of
thermal cutting techniques using oxyfuel, plasma and laser have
become indispensable for the shape forming of high quality complex
components; however, the conventional chip removal production
techniques still have its widespread space in the manufacturing
industry. Both these types of machining operations require the
positioning of end effector tool at the edge where the cutting process
commences. This repositioning of the cutting tool in every machining
operation is repeated several times and is termed as non-productive
time or airtime motion. Minimization of this non-productive
machining time plays an important role in mass production with high
speed machining. As, the tool moves from one region to the other by
rapid movement and visits a meticulous region once in the whole
operation, hence the non-productive time can be minimized by
synchronizing the tool movements. In this work, this problem is
being formulated as a general travelling salesman problem (TSP) and
a genetic algorithm approach has been applied to solve the same. For
improving the efficiency of the algorithm, the GA has been
hybridized with a noble special heuristic and simulating annealing
(SA). In the present work a novel heuristic in the combination of GA
has been developed for synchronization of toolpath movements
during repositioning of the tool. A comparative analysis of new Meta
heuristic techniques with simple genetic algorithm has been
performed. The proposed metaheuristic approach shows better
performance than simple genetic algorithm for minimization of nonproductive
toolpath length. Also, the results obtained with the help of
hybrid simulated annealing genetic algorithm (HSAGA) are also
found better than the results using simple genetic algorithm only.
Abstract: A real time image-guided electroplating system is
proposed in this paper. Unlike previous electroplating systems, instead
of using the intermittent mode to electroplate 500um long copper
specimen, a CCD camera and a motion controller are used to adjust
anode-cathode distance to obtain better results. Since the image of the
gap distance is highly deteriorated due to complex chemical-electrical
operation inside the electrolyte, to determine the gap distance, an
image processing algorithm is developed and mainly based on the
entropy and energy values. In addition, the color and incidence
direction of light source are also discussed to help the image process in
this paper. From the experiment results, the specimens created by the
proposed system show better structure, better uniformity and better
finishing surface compared to those by previous intermittent
electroplating setup.
Abstract: With the widespread growth of applications of
Wireless Sensor Networks (WSNs), the need for reliable security
mechanisms these networks has increased manifold. Many security
solutions have been proposed in the domain of WSN so far. These
solutions are usually based on well-known cryptographic
algorithms.
In this paper, we have made an effort to survey well known
security issues in WSNs and study the behavior of WSN nodes that
perform public key cryptographic operations. We evaluate time
and power consumption of public key cryptography algorithm for
signature and key management by simulation.
Abstract: Transmission network expansion planning (TNEP) is an important component of power system planning that its task is to minimize the network construction and operational cost while satisfying the demand increasing, imposed technical and economic conditions. Up till now, various methods have been presented to solve the static transmission network expansion planning (STNEP) problem. But in all of these methods, the lines adequacy rate has not been studied after the planning horizon, i.e. when the expanded network misses its adequacy and needs to be expanded again. In this paper, in order to take transmission lines condition after expansion in to account from the line loading view point, the adequacy of transmission network is considered for solution of STNEP problem. To obtain optimal network arrangement, a decimal codification genetic algorithm (DCGA) is being used for minimizing the network construction and operational cost. The effectiveness of the proposed idea is tested on the Garver's six-bus network. The results evaluation reveals that the annual worth of network adequacy has a considerable effect on the network arrangement. In addition, the obtained network, based on the DCGA, has lower investment cost and higher adequacy rate. Thus, the network satisfies the requirements of delivering electric power more safely and reliably to load centers.
Abstract: In this paper we used data mining techniques to
identify outlier patients who are using large amount of drugs over a
long period of time. Any healthcare or health insurance system
should deal with the quantities of drugs utilized by chronic diseases
patients. In Kingdom of Bahrain, about 20% of health budget is spent
on medications. For the managers of healthcare systems, there is no
enough information about the ways of drug utilization by chronic
diseases patients, is there any misuse or is there outliers patients. In
this work, which has been done in cooperation with information
department in the Bahrain Defence Force hospital; we select the data
for Cardiac patients in the period starting from 1/1/2008 to
December 31/12/2008 to be the data for the model in this paper. We
used three techniques for finding the drug utilization for cardiac
patients. First we applied a clustering technique, followed by
measuring of clustering validity, and finally we applied a decision
tree as classification algorithm. The clustering results is divided into
three clusters according to the drug utilization, for 1603 patients, who
received 15,806 prescriptions during this period can be partitioned
into three groups, where 23 patients (2.59%) who received 1316
prescriptions (8.32%) are classified to be outliers. The classification
algorithm shows that the use of average drug utilization and the age,
and the gender of the patient can be considered to be the main
predictive factors in the induced model.
Abstract: Urbanization and related anthropogenic modifications
cause extent of habitat fragmentation and directly lead to decline of
local biodiversity. Conservation biologists advocate corridor creation
as one approach to rescue biodiversity. Here we examine the utility of
roads as corridors in preserving plant diversity by investigating
roadside vegetation in Yellow River Delta (YRD), China. We
examined the spatio-temporal distribution pattern of plant species
richness, diversity and composition along roadside. The results
suggest that roads, as dispersal conduits, increase occurrence
probability of new settlers to a new area, meanwhile, roads accumulate
the greater propagule pressure and favourable survival condition
during operation phase. As a result, more species, including native and
alien plants, non- halophyte and halophyte species, threatened and
cosmopolitic species, were found prosperous at roadside. Roadside
may be a refuge for more species, and the pattern of vegetation
distribution is affected by road age and the distance from road verge.
Abstract: Cognitive Science appeared about 40 years ago,
subsequent to the challenge of the Artificial Intelligence, as common
territory for several scientific disciplines such as: IT, mathematics,
psychology, neurology, philosophy, sociology, and linguistics. The
new born science was justified by the complexity of the problems
related to the human knowledge on one hand, and on the other by the
fact that none of the above mentioned sciences could explain alone
the mental phenomena. Based on the data supplied by the
experimental sciences such as psychology or neurology, models of
the human mind operation are built in the cognition science. These
models are implemented in computer programs and/or electronic
circuits (specific to the artificial intelligence) – cognitive systems –
whose competences and performances are compared to the human
ones, leading to the psychology and neurology data reinterpretation,
respectively to the construction of new models. During these
processes if psychology provides the experimental basis, philosophy
and mathematics provides the abstraction level utterly necessary for
the intermission of the mentioned sciences.
The ongoing general problematic of the cognitive approach
provides two important types of approach: the computational one,
starting from the idea that the mental phenomenon can be reduced to
1 and 0 type calculus operations, and the connection one that
considers the thinking products as being a result of the interaction
between all the composing (included) systems. In the field of
psychology measurements in the computational register use classical
inquiries and psychometrical tests, generally based on calculus
methods. Deeming things from both sides that are representing the
cognitive science, we can notice a gap in psychological product
measurement possibilities, regarded from the connectionist
perspective, that requires the unitary understanding of the quality –
quantity whole. In such approach measurement by calculus proves to
be inefficient. Our researches, deployed for longer than 20 years,
lead to the conclusion that measuring by forms properly fits to the
connectionism laws and principles.
Abstract: Partial combustion of biomass in the gasifier generates producer gas that can be used for heating purposes and as supplementary or sole fuel in internal combustion engines. In this study, the virgin biomass obtained from hingan shell is used as the feedstock for gasifier to generate producer gas. The gasifier-engine system is operated on diesel and on esters of vegetable oil of hingan in liquid fuel mode operation and then on liquid fuel and producer gas combination in dual fuel mode operation. The performance and emission characteristics of the CI engine is analyzed by running the engine in liquid fuel mode operation and in dual fuel mode operation at different load conditions with respect to maximum diesel savings in the dual fuel mode operation. It was observed that specific energy consumption in the dual fuel mode of operation is found to be in the higher side at all load conditions. The brake thermal efficiency of the engine using diesel or hingan oil methyl ester (HOME) is higher than that of dual fuel mode operation. A diesel replacement in the tune of 60% in dual fuel mode is possible with the use of hingan shell producer gas. The emissions parameters such CO, HC, NOx, CO2 and smoke are higher in the case of dual fuel mode of operation as compared to that of liquid fuel mode.