Abstract: The sub-task pattern in terms of deviations and defects
should be identified and understood in order to improve the quality of
practices in construction projects. Therefore, sub-task susceptibility
to exposure to deviations and defects has been evaluated and
classified via six classifications proposed in this study. Thirty-four
case studies of specific sub-tasks (from compression members in
constructed concrete structures) were collected from seven
construction projects in order to examine the study’s proposed
classifications. The study revealed that the sub-task has a high
sensitivity to deviation, where 91% of the cases were recorded as
deviations; however, only 19% of cases were recorded as defects.
Other findings were that the actual work during the execution process
is a high source of deviation for this sub-task (74%), while only 26%
of the source of deviation was due to both design documentation and
the actual work. These findings significantly imply that the study’s
proposed classifications could be used to determine the pattern of
each sub-task and develop proactive actions to overcome issues of
sub-task deviations and defects.
Abstract: In our paper we describe the security capabilities of
data collection. Data are collected with probes located in the near and
distant surroundings of the company. Considering the numerous
obstacles e.g. forests, hills, urban areas, the data collection is realized
in several ways. The collection of data uses connection via wireless
communication, LAN network, GSM network and in certain areas
data are collected by using vehicles. In order to ensure the connection
to the server most of the probes have ability to communicate in
several ways. Collected data are archived and subsequently used in
supervisory applications.
To ensure the collection of the required data, it is necessary to
propose algorithms that will allow the probes to select suitable
communication channel.
Abstract: FengShui, an old Chinese discipline, dates back to
more than 5000 years, is one of the design principles that aim at
creating habitable and sustainable spaces in harmony with nature by
systematizing data within its own structure. Having emerged from
Chinese mysticism and embodying elements of faith in its principles,
FengShui argues that the positive energy in the environment channels
human behavior and psychology. This argument is supported with the
thesis of quantum physics that ‘everything is made up of energy’ and
gains an important place.
In spaces where living and working take place with several
principles and systematized rules, FengShui promises a happier, more
peaceful and comfortable life by influencing human psychology, acts,
and soul as well as the professional and social life of the individual.
Observing these design properties in houses, workplaces, offices, the
environment, and daily life as a design paradigm is significant. In this
study, how FengShui, a Central Asian culture emanated from Chinese
mysticism, shapes design and how it is used as an element of
sustainable design will be explained.
Abstract: In this paper, snow samples containing dust particles
from several sampling points around the city of Ostrava were
analyzed. The pH values of sampled snow were measured and solid
particles analyzed. Particle size, zeta potential and content of selected
heavy metals were determined in solid particles. The pH values of
most samples lay in the slightly acid region. Mean values of particle
size ranged from 290.5 to 620.5 nm. Zeta potential values varied
between -5 and -26.5 mV. The following heavy metal concentration
ranges were found: copper 0.08-0.75 mg/g, lead 0.05-0.9 mg/g,
manganese 0.45-5.9 mg/g and iron 25.7-280.46 mg/g. The highest
values of copper and lead were found in the vicinity of busy
crossroads, and on the contrary, the highest levels of manganese and
iron were detected close to a large steelworks. The proportion
between pH values, zeta potentials, particle sizes and heavy metal
contents was established. Zeta potential decreased with rising pH
values and, simultaneously, heavy metal content in solid particles
increased. At the same time, higher metal content corresponded to
lower particle size.
Abstract: In this paper, the effect of WC-12Co particle
temperature in HVOF thermal spraying process on the coating
thickness has been studied. The statistical results show that the spray
distance and oxygen-to-fuel ratio are effective factors on particle
characterization and thickness of HVOF thermal spraying coatings.
Spray Watch diagnostic system, scanning electron microscopy
(SEM), X-ray diffraction and thickness measuring system were used
for this purpose.
Abstract: Online forum is part of a Learning Management
System (LMS) environment in which students share their opinions.
This study attempts to investigate the perceptions of students towards
online forum and their patterns of listening behavior during the forum
interaction. The students’ perceptions were measured using a
questionnaire, in which seven dimensions were used involving online
experience, benefits of forum participation, cost of participation,
perceived ease of use, usefulness, attitude, and intention. Meanwhile,
their patterns of listening behaviors were obtained using the log file
extracted from the LMS. A total of 25 postgraduate students
undertaking a course were involved in this study, and their activities
in the forum session were recorded by the LMS and used as a log file.
The results from the questionnaire analysis indicated that the students
perceived that the forum is easy to use, useful, and bring benefits to
them. Also, they showed positive attitude towards online forum, and
they have the intention to use it in future. Based on the log data, the
participants were also divided into six clusters of listening behavior,
in which they are different in terms of temporality, breadth, depth and
speaking level. The findings were compared to previous clusters
grouping and future recommendations are also discussed.
Abstract: This paper presents a comparison between using a
desktop web application and a mobile application for students
enrolling in courses at Rangsit University, Thailand. In addition,
Rangsit University has enhanced the enrollment process by
leveraging its information systems, which allows students to choose
to enroll in courses online. In order to use the system, students must
provide their identification and personal documents for registration.
The reason to have a mobile application is to support students’ ability
to access the system at anytime, anywhere and anyplace. The
objective of this paper was to: 1. Evaluate the success of developing a
user friendly mobile device system and 2. Measure user interest in
future mobile development.
Abstract: The article discusses multimodal mobility in
contemporary societies as a main planning and organization issue in
the functioning of administrative bodies, a problem which really
exists in the space of contemporary cities in terms of shaping modern
transport systems. The article presents classification of available
resources and initiatives undertaken for developing multimodal
mobility. Solutions can be divided into three groups of measures –
physical measures in the form of changes of the transport network
infrastructure, organizational ones (including transport policy) and
information measures. The latter ones include in particular direct
support for people travelling in the transport network by providing
information about ways of using available means of transport. A
special measure contributing to this end is a trip planner. The article
compares several selected planners. It includes a short description of
the Green Travelling Project, which aims at developing a planner
supporting environmentally friendly solutions in terms of transport
network operation. The article summarizes preliminary findings of
the project.
Abstract: Age ratings are very helpful in providing parents with
relevant information for the purchase and use of digital technologies
by the children; this is why the non-definition of age ratings for the
use of ICTs by children in schools is a major concern; and this
problem serves as a motivation for this study whose aim is to
examine the factors affecting the perceptions of educators on the
learners’ youngest age for the introduction of ICTs in schools. This
aim is achieved through two types of research objectives: the
identification and design of theories and models on age ratings, and
the empirical testing of such theories and models in a survey of
educators from the Camperdown district of the South African
KwaZulu-Natal province. A questionnaire is used for the collection
of the data of this survey whose validity and reliability is checked in
SPSS prior to its descriptive and correlative quantitative analysis. The
main hypothesis supporting this research is the association between
the demographics of educators, their personality, and their
perceptions on the learners’ youngest age for the introduction of ICTs
in schools; as claimed by existing research; except that the present
study looks at personality from three dimensions: self-actualized
personalities, fully functioning personalities, and healthy
personalities. This hypothesis was fully confirmed by the empirical
study conducted by this research except for the demographic factor
where only the educators’ grade or class was found to be associated
with the personality of educators.
Abstract: The main aim of this research was to investigate the
perspectives of English language teachers and learners on the effect
of test techniques on reading comprehension, test performance and
assessment. The research has also aimed at finding the differences
between teacher and learner perspectives, specifying the test
techniques which have the highest effect, investigating the other
factors affecting reading comprehension, and comparing the results
with the similar studies. In order to achieve these objectives,
perspectives and findings of different researchers were reviewed, two
different questionnaires were prepared to collect data for the
perspectives of teachers and learners, the questionnaires were applied
to 26 learners and 8 teachers from the University of Batna (Algeria),
and quantitative and qualitative data analysis of the results were
done. The results and analysis of the results show that different test
techniques affect reading comprehension, test performance and
assessment at different percentages rates.
Abstract: The paper is focused on the methods to solutions of
the crisis situation in the Czech Republic associated with the mass
methanol poisoning. The emphasis is put on tasks of individual state
bodies and of Integrated Rescue System during the handling of the
crisis.
The theoretical part describes poisonings, ways of intoxication,
types of intoxicants and cases of mass poisoning by dangerous
substances in the world.
The practical part describes the development, causes and solutions
of extraordinary event, mass methanol poisoning in the Czech
Republic. The main emphasis was put on the crisis management of
the Czech Republic in solving this situation.
Abstract: In this paper, we present a comparative assessment of
Space Vector Pulse Width Modulation (SVPWM) and Model
Predictive Control (MPC) for two-level three phase (2L-3P) Voltage
Source Inverter (VSI). VSI with associated system is subjected to
both control techniques and the results are compared.
Matlab/Simulink was used to model, simulate and validate the
control schemes. Findings of this study show that MPC is superior to
SVPWM in terms of total harmonic distortion (THD) and
implementation.
Abstract: This research focuses on the optimization of glazed
surfaces and the assessment of possible solar gains in industrial
buildings. Existing window rating methods for single windows were
evaluated and a new method for a simple analysis of energy gains and
losses by single windows was introduced. Furthermore extensive
transient building simulations were carried out to appraise the
performance of low cost polycarbonate multi-cell sheets in
interaction with typical buildings for industrial applications. Mainly
energy saving potential was determined by optimizing the orientation
and area of such glazing systems in dependency on their thermal
qualities. Moreover the impact on critical aspects such as summer
overheating and daylight illumination was considered to ensure the
user comfort and avoid additional energy demand for lighting or
cooling. Hereby the simulated heating demand could be reduced by
up to 1/3 compared to traditional architecture of industrial halls using
mainly skylights.
Abstract: The majority of contemporary insulation materials
commonly used in the building industry is made from non-renewable
raw materials; furthermore, their production often brings high energy
costs. A long-term trend as far as sustainable development is
concerned has been the reduction of energy and material demands of
building material production. One of the solutions is the possibility of
using easily renewable natural raw material sources which are
considerably more ecological and their production is mostly less
energy-consuming compared to the production of normal insulations
(mineral wool, polystyrene). The paper describes the results of
research focused on the development of thermal and acoustic
insulation materials based on natural fibres intended for floor
constructions. Given the characteristic open porosity of natural fibre
materials, the hygrothermal behaviour of the developed materials was
studied. Especially the influence of relative humidity and temperature
on thermal insulation properties was observed.
Abstract: The paper deals with current issues in research of
advanced methods to increase reliability of traditional timber
structural elements. It analyses the issue of strengthening of bent
timber beams, such as ceiling beams in old (historical) buildings with
additional concrete slab in combination with externally bonded fibre -
reinforced polymer. The paper describes experimental testing of
composite timber-concrete beam with FRP reinforcement and
compares results with FEM analysis.
Abstract: This paper focuses on the presentation of results
which were obtained as a part of the project FR-TI 3/742: “System of
Lightweight Materials for Finishing of Buildings with Waste Raw
Materials”. Attention was paid to the light weighting of polymermodified
mortars applicable as adhesives, screeds and repair mortars.
In terms of repair mortars, they were ones intended for the sanitation
of aerated concrete.
Abstract: Advances technology in the field of photogrammetry
replaces analog cameras with reflection on aircraft GPS/IMU system
with a digital aerial camera. In this system, when determining the
position of the camera with the GPS, camera rotations are also
determined by the IMU systems. All around the world, digital aerial
cameras have been used for the photogrammetry applications in the
last ten years. In this way, in terms of the work done in
photogrammetry it is possible to use time effectively, costs to be
reduced to a minimum level, the opportunity to make fast and
accurate.
Geo-referencing techniques that are the cornerstone of the GPS /
INS systems, photogrammetric triangulation of images required for
balancing (interior and exterior orientation) brings flexibility to the
process. Also geo-referencing process; needed in the application of
photogrammetry targets to help to reduce the number of ground
control points. In this study, the use of direct and indirect georeferencing
techniques on the accuracy of the points was investigated
in the production of photogrammetric mapping.
Abstract: Persea declinata (Bl.) Kosterm is a member of the
Lauraceae family, widely distributed in Southeast Asia. It is from the
same genus with avocado (Persea americana Mill), which is widely
consumed as food and for medicinal purposes. In the present study,
we examined the anticancer properties of Persea declinata (Bl.)
Kosterm bark methanolic crude extract (PDM). PDM exhibited a
potent antiproliferative effect in MCF-7 human breast cancer cells,
with an IC50 value of 16.68 .g/mL after 48h of treatment. We
observed that PDM caused cell cycle arrest and subsequent apoptosis
in MCF-7 cells, as exhibited by increased population at G0/G1 phase,
higher lactate dehydrogenase (LDH) release, and DNA
fragmentation. Mechanistic studies showed that PDM caused
significant elevation in ROS production, leading to perturbation of
mitochondrial membrane potential, cell permeability, and activation
of caspases-3/7. On the other hand, real-time PCR and Western blot
analysis showed that PDM treatment increased the expression of the
proapoptotic molecule, Bax, but decreased the expression of
prosurvival proteins, Bcl-2 and Bcl-xL, in a dose-dependent manner.
These findings imply that PDM could inhibit proliferation in MCF-7
cells via cell cycle arrest and apoptosis induction, indicating its
potential as a therapeutic agent worthy of further development.
Abstract: In Capitalism all economic activity rests upon a set of
core institutional foundations, main from which are privately owned
capital assets and profit. How these core institutional foundations are
working in former soviet countries, in particular in Travel and
Tourism Industry of Georgia?
The role of Travel and Tourism as a key pillar of economic growth
is being increasingly recognized by governments in all regions of the
world. For the last few years Georgia succeeded in the World Bank
and IFC “Doing Business” rankings. Despite of that, during decades
totally different statistical data of the tourism sector were provided by
the different State bodies; economic parameters were published few,
or not published at all.
The frequency and extent of property rights violation in Georgia
has repeatedly been the subject of concern for the last decade. Total
value of abrogated by the former Georgian Government private
property is estimated approximately in US$4-5 billion.
Thus, if economic profitability is unknown and property rights are
not protected – that means that the main institutional foundations of
capitalism in Georgia, are not working properly yet, that cause
management problems at all levels of the national Travel and
Tourism industry of Georgia.
Abstract: The purpose of this research is to study of consumer
perception and understanding consumer buying behavior that related
between satisfied and factors affecting the purchasing. Methodology
can be classified between qualitative and quantitative approaches for
the qualitative research were interviews from middlemen who bought
organic vegetables, and middlemen related to production and
marketing system. A questionnaire was utilized as a tool to collect
data. Statistics utilized in this research included frequency,
percentage, mean, standard deviation, and multiple regression
analysis. The result show the reason to decision buying motives is
Fresh products of organic vegetables is the most significant factor on
individuals’ income, with a b of –.143, t = –2.470, the price of
organic vegetables is the most significant factor on individuals’
income, with a b of .176, t = 2.561, p value = .011. The results show
that most people with higher income think about the organic products
are expensive and have negative attitudes towards organic vegetable
as individuals with low and medium income level. Therefore,
household income had a significant influence on the purchasing
decision.