Abstract: Australian government agencies have a natural desire
to provide migrants a wide range of opportunities. Consequently,
government online services should be equally available to migrants
with a non-English speaking background (NESB). Despite the
commendable efforts of governments and local agencies in Australia
to provide such services, in reality, many NESB communities are not
taking advantage of these services. This article–based on an
extensive case study regarding the use of online government services
by the Arabic NESB community in Australia–reports on the
possible reasons for this issue, as well as suggestions for
improvement. The conclusion is that Australia should implement
ICT-based or e-government policies, programmes, and services that
more accurately reflect migrant cultures and languages so that
migrant integration can be more fully accomplished. Specifically, this
article presents an NESB Model that adopts the value of usercentricity
or a more individual-focused approach to government
online services in Australia.
Abstract: Tourism and coastal lines are the business sectors
since centuries especially in the European Nations and Albania is one
such spots. However, in recent decades tourism is experienced as
vulnerability of the surrounding ecological conditions of air, soil,
water, land and the communities that are dependant and sharing the
ecosystem among flora and fauna. Experts opine that apart from the
maintenance of near-originality of ecological biodiversity the tourism
rather known as ecotourism an indigenous socio-cultural
maintenance of indigenous/traditional knowledge of the local people
must be well cared in order to sustain on sustainable grounds. As a
general tendency, growth of tourism has been affected by the deterioration in the economic conditions on one aspect and unsustainable ecological areas affected since human interventions
earlier to this has negative impact on futuristic tourist spots. However, tourism in Albania as of now is 11% of GDP and coastal regions accounting to 2-4%. An amicable Mediterranean
climate with 300 sunny days similar parameters of Greece and Spain
throws up sustainable ecotourism in future decades provided public services namely, transportation, road safety, lodging, food
availability, recreational regiments, banking accessibility are as per
the World Tourism Organizations- protocols. Thus as of Albanian
situation, classification of ecotourism activities to safe-guard the localities with its maintenance of ecological land, water and climate
has become a paramount importance with a wanting and satisfactory options through harnessing human energy for profit and fitness of
ecological flora and fauna. A check on anthropogenic wastes and
their safer utilizations inclusive of agricultural and industrial
operations in line with Lalzi Bay Coastal Line are of utmost importance for the reason that the Adriatic Sea Coast is the one long
stretch of Albanian Lifeline. The present work is based on the methodology of the sustainable management of the same issue.
Abstract: The quest of providing more secure identification
system has led to a rise in developing biometric systems. Dorsal
hand vein pattern is an emerging biometric which has attracted the
attention of many researchers, of late. Different approaches have
been used to extract the vein pattern and match them. In this work,
Principle Component Analysis (PCA) which is a method that has
been successfully applied on human faces and hand geometry is
applied on the dorsal hand vein pattern. PCA has been used to obtain
eigenveins which is a low dimensional representation of vein pattern
features. Low cost CCD cameras were used to obtain the vein
images. The extraction of the vein pattern was obtained by applying
morphology. We have applied noise reduction filters to enhance the
vein patterns. The system has been successfully tested on a database
of 200 images using a threshold value of 0.9. The results obtained are
encouraging.
Abstract: This paper proposes a new optimization techniques
for the optimization a gas processing plant uncertain feed and
product flows. The problem is first formulated using a continuous
linear deterministic approach. Subsequently, the single and joint
chance constraint models for steady state process with timedependent
uncertainties have been developed. The solution approach
is based on converting the probabilistic problems into their
equivalent deterministic form and solved at different confidence
levels Case study for a real plant operation has been used to
effectively implement the proposed model. The optimization results
indicate that prior decision has to be made for in-operating plant
under uncertain feed and product flows by satisfying all the
constraints at 95% confidence level for single chance constrained and
85% confidence level for joint chance constrained optimizations
cases.
Abstract: The paper attempts a synthesis of problems relating to
municipal waste management in Nigeria and proposes a conceptual
knowledge management approach for tackling municipal waste
problems in cities across Nigeria. The application of knowledge
management approach and strategy is crucial for inculcating a change
of attitude towards improving the management of waste. The paper is
a review of existing literatures, information, policies and data on
municipal waste management in Nigeria. The inefficient management
of waste by individuals, households, consumers and waste
management companies can be attributed to inadequate information
on waste management benefits, lack of producers- involvement in
waste management as well as poor implementation of government
policies. The paper presents an alternative approach providing
solutions promoting efficient municipal waste management.
Abstract: The atmospheric pressure plasma torch with a direct
current arc discharge stabilized by water vapor vortex was
experimentally investigated. Overheated up to 450K water vapor was
used as plasma forming gas. Plasma torch design is one of the most
important factors leading to a stable operation of the device. The
electrical and thermal characteristics of the plasma torch were
determined during the experimental investigations. The design and
the basic characteristics of the water vapor plasma torch are presented
in the paper.
Plasma torches with the electric arc stabilized by water vapor
vortex provide special performance characteristics in some plasma
processing applications such as thermal plasma neutralization and
destruction of organic wastes enabling to extract high caloric value
synthesis gas as by-product of the process. Syngas could be used as a
surrogate fuel partly replacing the dependence on the fossil fuels or
used as a feedstock for hydrogen, methanol production.
Abstract: This study uses GIS (Geographic Information
Systems) to conduct an evaluation of the degree of the sufficiency of
public green spaces such as parks and urban green areas as an
indicator of the density of metropolitan areas, in particular the Chubu
metropolitan area, in Japan. To that end, it first grasps the distribution
situation of green spaces in the three metropolitan areas in Japan,
especially in the Chubu metropolitan area, using GIS digital maps.
And based on this result, it conducts a GIS evaluation of the degree of
sufficiency of public green spaces and arranges the result for every
distance belt from the central part to compare and exam for every
distance belt away from the center in the Chubu metropolitan area.
Furthermore, after pointing out the insufficient areas of public green
spaces based on the result, it also proposes the improvement policy
which can be introduced in the Chubu metropolitan area.
Abstract: Candida spp. are common and aggressive pathogens.
Because of the growing resistance of Candida spp. to current
antifungals, novel targets, found in Candida spp. but not in humans
or other flora, have to be identified. The alternative oxidase (AOX)
is one such possibility. This enzyme is insensitive to cyanide, but is
sensitive to compounds such as salicylhydroxamic acid (SHAM),
disulfiram and n-alkyl gallates. The growth Candida albicans was
inhibited by SHAM (Ki = 9-15 mM) and cyanide (Ki = 2-4 mM),
albeit to differing extents. The rate of O2 uptake was inhibited by
less than 10% by 25 mM SHAM and by about 90% by 250 μM
KCN. Although SHAM substantially inhibited the growth of C.
albicans, it is unlikely that the inhibition of AOX was the cause.
Salicylhydroxamic acid is used therapeutically in the treatment of
urinary tract infections and urolithiasis, but it also has some potential
in the treatment of C. albicans infection.
Abstract: Over the past decade, mobile has experienced a
revolution that will ultimately change the way we communicate.All
these technologies have a common denominator exploitation of
computer information systems, but their operation can be tedious
because of problems with heterogeneous data sources.To overcome
the problems of heterogeneous data sources, we propose to use a
technique of adding an extra layer interfacing applications of
management or supervision at the different data sources.This layer
will be materialized by the implementation of a mediator between
different host applications and information systems frequently used
hierarchical and relational manner such that the heterogeneity is
completely transparent to the VoIP platform.
Abstract: Cooktop burners are widely used nowadays. In
cooktop burner design, nozzle efficiency and greenhouse
gas(GHG) emissions mainly depend on heat transfer from the
premixed flame to the impinging surface. This is a complicated
issue depending on the individual and combined effects of various
input combustion variables. Optimal operating conditions for
sustainable burner design were rarely addressed, especially in the
case of multiple slot-jet burners. Through evaluating the optimal
combination of combustion conditions for a premixed slot-jet
array, this paper develops a practical approach for the sustainable
design of gas cooktop burners. Efficiency, CO and NOx emissions
in respect of an array of slot jets using premixed flames were
analysed. Response surface experimental design were applied to
three controllable factors of the combustion process, viz.
Reynolds number, equivalence ratio and jet-to-vessel distance.
Desirability Function Approach(DFA) is the analytic technique
used for the simultaneous optimization of the efficiency and
emission responses.
Abstract: This paper presents the results of a comprehensive
investigation of five blackouts that occurred on 28 August to 8
September 2011 due to bushing failures of the 132/33 kV, 125 MVA
transformers at JBB Ali Grid station. The investigation aims to
explore the root causes of the bushing failures and come up with
recommendations that help in rectifying the problem and avoiding the
reoccurrence of similar type of incidents. The incident reports about
the failed bushings and the SCADA reports at this grid station were
examined and analyzed. Moreover, comprehensive power quality
field measurements at ten 33/11 kV substations (S/Ss) in JBB Ali
area were conducted, and frequency scans were performed to verify
any harmonic resonance frequencies due to power factor correction
capacitors. Furthermore, the daily operations of the on-load tap
changers (OLTCs) of both the 125 MVA and 20 MVA transformers
at JBB Ali Grid station have been analyzed. The investigation
showed that the five bushing failures were due to a local problem, i.e.
internal degradation of the bushing insulation. This has been
confirmed by analyzing the time interval between successive OLTC
operations of the faulty grid transformers. It was also found that
monitoring the number of OLTC operations can help in predicting
bushing failure.
Abstract: The present work is concerned with the effect of turning process parameters (cutting speed, feed rate, and depth of cut) and distance from the center of work piece as input variables on the chip micro-hardness as response or output. Three experiments were conducted; they were used to investigate the chip micro-hardness behavior at diameter of work piece for 30[mm], 40[mm], and 50[mm]. Response surface methodology (R.S.M) is used to determine and present the cause and effect of the relationship between true mean response and input control variables influencing the response as a two or three dimensional hyper surface. R.S.M has been used for designing a three factor with five level central composite rotatable factors design in order to construct statistical models capable of accurate prediction of responses. The results obtained showed that the application of R.S.M can predict the effect of machining parameters on chip micro-hardness. The five level factorial designs can be employed easily for developing statistical models to predict chip micro-hardness by controllable machining parameters. Results obtained showed that the combined effect of cutting speed at it?s lower level, feed rate and depth of cut at their higher values, and larger work piece diameter can result increasing chi micro-hardness.
Abstract: In this paper, a new efficient method for load balancing in low voltage distribution systems is presented. The proposed method introduces an improved Leap-frog method for optimization. The proposed objective function includes the difference between three phase currents, as well as two other terms to provide the integer property of the variables; where the latter are the status of the connection of loads to different phases. Afterwards, a new algorithm is supplemented to undertake the integer values for the load connection status. Finally, the method is applied to different parts of Tabriz low voltage network, where the results have shown the good performance of the proposed method.
Abstract: In this study the behavior of interlaminar fracture of
carbon-epoxy thermoplastic laminated composite is investigated
numerically and experimentally. Tests are performed with Arcan
specimens. Testing with Arcan specimen gives the opportunity of
utilizing just one kind of specimen for extracting fracture properties
for mode I, mode II and different mixed mode ratios of materials with
exerting load via different loading angles. Variation of loading angles
in range of 0-90° made possible to achieve different mixed mode
ratios. Correction factors for various conditions are obtained from
ABAQUS 2D finite element models which demonstrate the finite
shape of Arcan specimens used in this study. Finally, applying the
correction factors to critical loads obtained experimentally, critical
interlaminar fracture toughness of this type of carbon- epoxy
composite has been attained.
Abstract: Many IT projects come to failure because of having
technical approach, focusing on the final product and lack of proper
attention to strategic alignment. Project management models quite
often have technical management view [4], [8], [13], [14]. These
models focus greatly on the finalization of the project product and the
delivery of the product to the customer. However, many project
problems are due to lack of attention to the needs and capabilities of
the organizations or disregarding how to deploy and use the product
in the organization. In this regard, in the current research we are
trying to present a solution with the purpose of raising the value of
the project in an organization. This way, the project outputs will be
properly deployed in the organization. Therefore, a comprehensive
model is presented which takes into account the whole processes
from initial step of project definition to the deployment of the final
outputs in the organization and then the definition of all roles and
responsibilities to put the model into practice. Taking into account
the opinions of experts and project managers, to prove the
performance of the model, the project problems were recognized and
based on the model, categorized and analyzed. And at the end it is
made clear that ignoring the proper definition of the project and not
having a proper understanding of the expected value on the one hand
and not supervising the emerged value in the process of production
and installment are among the most important factors that bring a
project to failure.
Abstract: The present work faces the problem of automatic enumeration and recognition of an unknown and time-varying number of environmental sound sources while using a single microphone. The assumption that is made is that the sound recorded is a realization of sound sources belonging to a group of audio classes which is known a-priori. We describe two variations of the same principle which is to calculate the distance between the current unknown audio frame and all possible combinations of the classes that are assumed to span the soundscene. We concentrate on categorizing environmental sound sources, such as birds, insects etc. in the task of monitoring the biodiversity of a specific habitat.
Abstract: Chemical detection is still a continuous challenge when
it comes to designing single-walled carbon nanotube (SWCNT)
sensors with high selectivity, especially in complex chemical
environments. A perfect example of such an environment would be in
thermally oxidized soybean oil. At elevated temperatures, oil oxidizes
through a series of chemical reactions which results in the formation of
monoacylglycerols, diacylglycerols, oxidized triacylglycerols, dimers,
trimers, polymers, free fatty acids, ketones, aldehydes, alcohols,
esters, and other minor products. In order to detect the rancidity of
oxidized soybean oil, carbon nanotube chemiresistor sensors have
been coated with polyethylenimine (PEI) to enhance the sensitivity
and selectivity. PEI functionalized SWCNTs are known to have a high
selectivity towards strong electron withdrawing molecules. The
sensors were very responsive to different oil oxidation levels and
furthermore, displayed a rapid recovery in ambient air without the
need of heating or UV exposure.
Abstract: Due to the emergence of “Humanized Healthcare"
introduced by Professor Dr. Prawase Wasi in 2003[1], the
development of this paradigm tends to be widely implemented. The
organizations included Healthcare Accreditation Institute (public
organization), National Health Foundation, Mahidol University in
cooperation with Thai Health Promotion Foundation, and National
Health Security Office (Thailand) have selected the hospitals or
infirmaries that are qualified for humanized healthcare since 2008-
2010 and 35 of them are chosen to be the outstandingly navigating
organizations for the development of humanized healthcare,
humanized healthcare award [2].
The research aims to study the current issue, characteristics and
patterns of hospital administration contributing to humanized
healthcare system in Thailand. The selected case studies are from
four hospitals including Dansai Crown Prince Hospital, Leoi;
Ubolrattana Hospital, Khon Kaen; Kapho Hospital, Pattani; and
Prathai Hospital, Nakhonrachasima. The methodology is in-depth
interviewing with 10 staffs working as hospital executive directors,
and representatives from leader groups including directors,
multidisciplinary hospital committees, personnel development
committees, physicians and nurses in each hospital. (Total=40) In
addition, focus group discussions between hospital staffs and general
people (including patients and their relatives, the community leader,
and other people) are held by means of setting 4 groups including 8
people within each group. (Total=128) The observation on the
working in each hospital is also implemented. The findings of the
study reveal that there are five important aspects found in each
hospital including (1) the quality improvement under the mental and
spiritual development policy from the chief executives and lead
teams, leaders as Role model and they have visionary leadership; (2)
the participation hospital administration system focusing on learning
process and stakeholder- needs, spiritual human resource
management and development; (3) the relationship among people
especially staffs, team work skills, mutual understanding, effective
communication and personal inner-development; (4) organization
culture relevant to the awareness of patients- rights as well as the
participation policy including spiritual growth achieving to the same
goals, sharing vision, developing public mind, and caring; and (5)
healing structures or environment providing warmth and convenience
for hospital staffs, patients and their relatives and visitors.
Abstract: This research studied the appropriate factors and conditions for laminated bamboo bending by Design of Experiments (DOE). The interested factors affecting the spring back in laminates bamboo were (1) time, (2) thickness, and (3) frequency. This experiment tested the specimen by using high frequency machine and measured its spring back immediately and next 24 hours for comparing the spring back ratio. Results from the experiments showed that significant factors having major influence to bending of laminates bamboo were thickness and frequency. The appropriate conditions of thickness and frequency were 4 mm. and 1.5 respectively.
Abstract: This paper proposed a nonlinear model predictive
control (MPC) method for the control of gantry crane. One of the main
motivations to apply MPC to control gantry crane is based on its
ability to handle control constraints for multivariable systems. A
pre-compensator is constructed to compensate the input nonlinearity
(nonsymmetric dead zone with saturation) by using its inverse
function. By well tuning the weighting function matrices, the control
system can properly compromise the control between crane position
and swing angle. The proposed control algorithm was implemented for
the control of gantry crane system in System Control Lab of University
of Technology, Sydney (UTS), and achieved desired experimental
results.