Abstract: Coriander is an annual and herbaceous plant, belong to
the apiaceae family. This plant is cultivated world widely. It is well
known for having medicinal properties. The aim of this experiment
was to study seed quality of species grown in Kermanshah
conditions. The experiment was carried out in research farm, Campus
of Agriculture and Natural Resources, Razi University, Kermanshah,
Iran. Coriander (local type) was grown in late spring May (5th and
20th) and Jun (4th and 19th), and plant density (10, 30, 50 and 70
plants m-2) in 2009. The experimental plots were laid out in a
factorial according to a randomized complete block design with three
replications. The fruits were harvest between 83.5 – 106.5 days after
sowing. The essential oil and oil content was extracted by Clevenger
and Soxhlet apparatuses, respectively. Results showed that delay at
planting date increased the oil content. Also, with the increase at
plant density was decreased oil content and essential oil.
Abstract: This paper is concerned with studying the forgetting factor of the recursive least square (RLS). A new dynamic forgetting factor (DFF) for RLS algorithm is presented. The proposed DFF-RLS is compared to other methods. Better performance at convergence and tracking of noisy chirp sinusoid is achieved. The control of the forgetting factor at DFF-RLS is based on the gradient of inverse correlation matrix. Compared with the gradient of mean square error algorithm, the proposed approach provides faster tracking and smaller mean square error. In low signal-to-noise ratios, the performance of the proposed method is superior to other approaches.
Abstract: Natural pozzolan (NP) is one of the potential
prehistoric alternative binders in the construction industry. It has
been investigated as cement replacement in ordinary concrete by
several researchers for many purposes. Various supplementary
cementitious materials (SCMs) such as fly ash, limestone dust and
silica fume are widely used in the production of SCC; however,
limited studies to address the effect of NP on the properties of SCC
are documented. The current research is composed of different SCC
paste and concrete mixtures containing different replacement levels
of local NP as an alternative SCM. The effect of volume of paste
containing different amounts of local NP related to W/B ratio and
cement content on SCC fresh properties was assessed. The variations
in the fresh properties of SCC paste and concrete represented by
slump flow (flowability) and the flow rate were determined and
discussed. The results indicated that the flow properties of SCC paste
and concrete mixtures, at their optimized superplasticizer dosages,
were affected by the binder content of local NP and the total volume
fraction of SCC paste.
Abstract: Because of the reservoir effect, dynamic analysis of concrete dams is more involved than other common structures. This problem is mostly sourced by the differences between reservoir water, dam body and foundation material behaviors. To account for the reservoir effect in dynamic analysis of concrete gravity dams, two methods are generally employed. Eulerian method in reservoir modeling gives rise to a set of coupled equations, whereas in Lagrangian method, the same equations for dam and foundation structure are used. The Purpose of this paper is to evaluate and study possible advantages and disadvantages of both methods. Specifically, application of the above methods in the analysis of dam-foundationreservoir systems is leveraged to calculate the hydrodynamic pressure on dam faces. Within the frame work of dam- foundationreservoir systems, dam displacement under earthquake for various dimensions and characteristics are also studied. The results of both Lagrangian and Eulerian methods in effects of loading frequency, boundary condition and foundation elasticity modulus are quantitatively evaluated and compared. Our analyses show that each method has individual advantages and disadvantages. As such, in any particular case, one of the two methods may prove more suitable as presented in the results section of this study.
Abstract: Nowadays, power systems, energy generation by wind
has been very important. Noting that the production of electrical
energy by wind turbines on site to several factors (such as wind speed
and profile site for the turbines, especially off the wind input speed,
wind rated speed and wind output speed disconnect) is dependent. On
the other hand, several different types of turbines in the market there.
Therefore, selecting a turbine that its capacity could also answer the
need for electric consumers the efficiency is high something is
important and necessary. In this context, calculating the amount of
wind power to help optimize overall network, system operation, in
determining the parameters of wind power is very important.
In this article, to help calculate the amount of wind power plant,
connected to the national network in the region Manjil wind,
selecting the best type of turbine and power delivery profile
appropriate to the network using Monte Carlo method has been.
In this paper, wind speed data from the wind site in Manjil, as minute
and during the year has been. Necessary simulations based on
Random Numbers Simulation method and repeat, using the software
MATLAB and Excel has been done.
Abstract: The need to have standards has always been a priority
of all the disciplines in the world. Today, standards such as XML and
USB are trying to create a universal interface for their respective
areas. The information regarding every family in the discipline
addressed, must have a lot in common, known as Metadata. A lot of
work has been done in specific domains such as IEEE LOM and
MPEG-7 but they do not appeal to the universality of creating
Metadata for all entities, where we take an entity (object) as, not
restricted to Software Terms. This paper tries to address this problem
of universal Metadata Definition which may lead to increase in
precision of search.
Abstract: This paper presents a new steganography approach suitable for Arabic texts. It can be classified under steganography feature coding methods. The approach hides secret information bits within the letters benefiting from their inherited points. To note the specific letters holding secret bits, the scheme considers the two features, the existence of the points in the letters and the redundant Arabic extension character. We use the pointed letters with extension to hold the secret bit 'one' and the un-pointed letters with extension to hold 'zero'. This steganography technique is found attractive to other languages having similar texts to Arabic such as Persian and Urdu.
Abstract: Supplier selection is a multi criteria decision-making process that comprises tangible and intangible factors. The majority of previous supplier selection techniques do not consider strategic perspective. Besides, uncertainty is one of the most important obstacles in supplier selection. For the first, time in this paper, the idea of the algorithm " Knapsack " is used to select suppliers Moreover, an attempt has to be made to take the advantage of a simple numerical method for solving model .This is an innovation to resolve any ambiguity in choosing suppliers. This model has been tried in the suppliers selected in a competitive environment and according to all desired standards of quality and quantity to show the efficiency of the model, an industry sample has been uses.
Abstract: In this paper back-propagation artificial neural network
(BPANN) is employed to predict the deformation of the upsetting
process. To prepare a training set for BPANN, some finite element
simulations were carried out. The input data for the artificial neural
network are a set of parameters generated randomly (aspect ratio d/h,
material properties, temperature and coefficient of friction). The
output data are the coefficient of polynomial that fitted on barreling
curves. Neural network was trained using barreling curves generated
by finite element simulations of the upsetting and the corresponding
material parameters. This technique was tested for three different
specimens and can be successfully employed to predict the
deformation of the upsetting process
Abstract: The mechanical and tribological properties in WC-Co
coatings are strongly affected by hardness and elasticity
specifications. The results revealed the effect of spraying distance on
microhardness and elasticity modulus of coatings. The metallurgical
studies have been made on coated samples using optical microscopy,
scanning electron microscopy (SEM).
Abstract: Nothing that an effective cure for infertility happens
when we can find a unique solution, a great deal of study has been
done in this field and this is a hot research subject for to days study.
So we could analyze the men-s seaman and find out about fertility
and infertility and from this find a true cure for this, since this will be
a non invasive and low risk procedure, it will be greatly welcomed.
In this research, the procedure has been based on few Algorithms
enhancement and segmentation of images which has been done on
the images taken from microscope in different fertility institution and
have obtained a suitable result from the computer images which in
turn help us to distinguish these sperms from fluids and its
surroundings.
Abstract: Recently, information security has become a key issue
in information technology as the number of computer security
breaches are exposed to an increasing number of security threats. A
variety of intrusion detection systems (IDS) have been employed for
protecting computers and networks from malicious network-based or
host-based attacks by using traditional statistical methods to new data
mining approaches in last decades. However, today's commercially
available intrusion detection systems are signature-based that are not
capable of detecting unknown attacks. In this paper, we present a
new learning algorithm for anomaly based network intrusion
detection system using decision tree algorithm that distinguishes
attacks from normal behaviors and identifies different types of
intrusions. Experimental results on the KDD99 benchmark network
intrusion detection dataset demonstrate that the proposed learning
algorithm achieved 98% detection rate (DR) in comparison with
other existing methods.
Abstract: The Combination of path planning and path following is the main purpose of this paper. This paper describes the developed practical approach to motion control of the MRL small size robots. An intelligent controller is applied to control omni-directional robots motion in simulation and real environment respectively. The Brain Emotional Learning Based Intelligent Controller (BELBIC), based on LQR control is adopted for the omni-directional robots. The contribution of BELBIC in improving the control system performance is shown as application of the emotional learning in a real world problem. Optimizing of the control effort can be achieved in this method too. Next the implicit communication method is used to determine the high level strategies and coordination of the robots. Some simple rules besides using the environment as a memory to improve the coordination between agents make the robots' decision making system. With this simple algorithm our team manifests a desirable cooperation.
Abstract: Groundwater resources in Arsanjan plain provide
water for agriculture, industry, and human consumption. Continued
agricultural development in this area needs to additional groundwater
resources for, particularly during of drought periods, and effects on
the quantity and quality of ground water available. The purpose of
this study is to evaluate water level changes in the aquifer of
Arsanjan plain in the Fars province in order to determine the areas of
greatest depletion and the causes of depletion. In this plain, farmers
and other users are pumping groundwater faster than its natural
replenishment rate, causing a continuous drop in groundwater tables
and depletion of this resource. In this research variation of
groundwater level, their effects and ways to help control groundwater
levels in aquifer of the Arsanjan plains were evaluated .Excessive
exploitation of groundwater in this aquifer caused the groundwater
levels fall too fast or to unacceptable levels. The average drawdown
of the groundwater level in this plain were 19.66 meters during
1996 to 2003.
Abstract: In the present study, Convective heat transfer
coefficient and pressure drop of Al2O3/water nanofluid in laminar
flow regime under constant heat flux conditions inside a circular tube
were experimentally investigated. Al2O3/water nanofluid with 0.5%
and 1% volume concentrations with 15 nm diameter nanoparticles
were used as working fluid. The effect of different volume
concentrations on convective heat transfer coefficient and friction
factor was studied. The results emphasize that increasing of particle
volume concentration leads to enhance convective heat transfer
coefficient. Measurements show the average heat transfer coefficient
enhanced about 11-20% with 0.5% volume concentration and
increased about 16-27% with 1% volume concentration compared to
distilled water. In addition, the convective heat transfer coefficient of
nanofluid enhances with increase in heat flux. From the results, the
average ratio of (fnf/fbf) was about 1.10 for 0.5% volume
concentration. Therefore, there is no significant increase in friction
factor for nanofluids.
Abstract: Sustainable energy usage has been recognized as one
of the important measure to increase the competitiveness of the
nation globally. Many strong emphases were given in the Ninth
Malaysia Plan (RMK9) to improve energy efficient especially to
government buildings. With this in view, a project to investigate the
potential of energy saving in selected building in Universiti Tun
Hussein Onn Malaysia (UTHM) was carried out. In this project, a
case study involving electric energy consumption of the academic
staff office building was conducted. The scope of the study include to
identify energy consumption in a selected building, to study energy
saving opportunities, to analyse cost investment in term of economic
and to identify users attitude with respect to energy usage. The
MS1525:2001, Malaysian Standard -Code of practice on energy
efficiency and use of renewable energy for non-residential buildings
was used as reference. Several energy efficient measures were
considered and their merits and priority were compared. Improving
human behavior can reduce energy consumption by 6% while
technical measure can reduce energy consumption by 44%. Two
economic analysis evaluation methods were applied; they are the
payback period method and net present value method.
Abstract: As the air traffic increases at a hub airport, some
flights cannot land or depart at their preferred target time. This event
happens because the airport runways become occupied to near their
capacity. It results in extra costs for both passengers and airlines
because of the loss of connecting flights or more waiting, more fuel
consumption, rescheduling crew members, etc. Hence, devising an
appropriate scheduling method that determines a suitable runway and
time for each flight in order to efficiently use the hub capacity and
minimize the related costs is of great importance. In this paper, we
present a mixed-integer zero-one model for scheduling a set of mixed
landing and departing flights (despite of most previous studies
considered only landings). According to the fact that the flight cost is
strongly affected by the level of airline, we consider different airline
categories in our model. This model presents a single objective
minimizing the total sum of three terms, namely 1) the weighted
deviation from targets, 2) the scheduled time of the last flight (i.e.,
makespan), and 3) the unbalancing the workload on runways. We
solve 10 simulated instances of different sizes up to 30 flights and 4
runways. Optimal solutions are obtained in a reasonable time, which
are satisfactory in comparison with the traditional rule, namely First-
Come-First-Serve (FCFS) that is far apart from optimality in most
cases.
Abstract: Scheduling algorithms are used in operating systems
to optimize the usage of processors. One of the most efficient
algorithms for scheduling is Multi-Layer Feedback Queue (MLFQ)
algorithm which uses several queues with different quanta. The most
important weakness of this method is the inability to define the
optimized the number of the queues and quantum of each queue. This
weakness has been improved in IMLFQ scheduling algorithm.
Number of the queues and quantum of each queue affect the response
time directly. In this paper, we review the IMLFQ algorithm for
solving these problems and minimizing the response time. In this
algorithm Recurrent Neural Network has been utilized to find both
the number of queues and the optimized quantum of each queue.
Also in order to prevent any probable faults in processes' response
time computation, a new fault tolerant approach has been presented.
In this approach we use combinational software redundancy to
prevent the any probable faults. The experimental results show that
using the IMLFQ algorithm results in better response time in
comparison with other scheduling algorithms also by using fault
tolerant mechanism we improve IMLFQ performance.
Abstract: Curriculum is one of the most important inputs in higher education system and for knowing the strong and weak spots of it we need evaluation. The main purpose of this study was to survey of the curriculum quality of Insurance Management field. Case: University of Allameh Taba Tabaee(according to view point of students,alumni,employer and faculty members).Descriptive statistics (mean, tables, percentages, frequency distribution) and inferential statistics (CHI SQUARE) were used to analyze the data. Six criterions considered for the Quality of curriculum: objectives, content, teaching and learning methods, space and facilities, Time, assessment of learning. objectives, teaching and learning methods criterions was desirable level, content criteria was undesirable level, space and facilities, time and assessment of learning were rather desirable level. The quality of curriculum of insurance management field was relatively desirable level.
Abstract: With the drastically growth in optical communication
technology, a lossless, low-crosstalk and multifunction optical switch
is most desirable for large-scale photonic network. To realize such a
switch, we have introduced the new architecture of optical switch
that embedded many functions on single device. The asymmetrical
architecture of OXADM consists of 3 parts; selective port, add/drop
operation, and path routing. Selective port permits only the interest
wavelength pass through and acts as a filter. While add and drop
function can be implemented in second part of OXADM architecture.
The signals can then be re-routed to any output port or/and perform
an accumulation function which multiplex all signals onto single path
and then exit to any interest output port. This will be done by path
routing operation. The unique features offered by OXADM has
extended its application to Fiber to-the Home Technology (FTTH),
here the OXADM is used as a wavelength management element in
Optical Line Terminal (OLT). Each port is assigned specifically with
the operating wavelengths and with the dynamic routing management
to ensure no traffic combustion occurs in OLT.