Abstract: To assess the effects of functional protein on osteoblast, Large quantity of high-purity osteoblasts had been cultivated successfully by adopting sequential enzyme digestion. The growth curve of osteoblasts was protracted by cell counting. Proliferation of osteoblasts was assessed by MTT colorimetry. The experimental results show the functional protein can enhance proliferation, the properties of adhesion and discuss the effect of osteopontin on osteoblast.
Abstract: An n×n matrix is called an N1 0 -matrix if all principal minors are non-positive and each entry is non-positive. In this paper, we study the partial non-combinatorially symmetric N1 0 -matrix completion problems if the graph of its specified entries is a transitive tournament or a double cycle. In general, these digraphs do not have N1 0 -completion. Therefore, we have given sufficient conditions that guarantee the existence of the N1 0 -completion for these digraphs.
Abstract: Aiming the application of localized hyperthermia, a
magnetic induction system with new approaches is proposed. The techniques in this system for improving the effectiveness of localized hyperthermia are that using magnetic circuit and the multiple-coil array instead of a giant coil for generating magnetic field. Specially, amorphous metal is adopted as the material of magnetic circuit. Detail
design parameters of hardware are well described. Simulation tool is
employed for this work and experiment result is reported as well.
Abstract: A logic model for analyzing complex systems- stability
is very useful to many areas of sciences. In the real world, we are
enlightened from some natural phenomena such as “biosphere", “food
chain", “ecological balance" etc. By research and practice, and taking
advantage of the orthogonality and symmetry defined by the theory of
multilateral matrices, we put forward a logic analysis model of
stability of complex systems with three relations, and prove it by
means of mathematics. This logic model is usually successful in
analyzing stability of a complex system. The structure of the logic
model is not only clear and simple, but also can be easily used to
research and solve many stability problems of complex systems. As an
application, some examples are given.
Abstract: Dehydration of methanol to dimethyl ether (DME)
over a commercial Al2O3 catalyst was studied in an isothermal integral
fixed bed reactor. The experiments were performed on the temperature
interval 513-613 K, liquid hourly space velocity (LHSV) of 0.9-2.1h-1,
pressures between 0.1 and 1.0 MPa. The effect of different operation
conditions on the dehydration of methanol was investigated in a
laboratory scale experiment. A new intrinsic kinetics equation based
on the mechanism of Langmuir-Hinshelwood dissociation adsorption
was developed for the dehydration reaction by fitting the expressions
to the experimental data. An activation energy of 67.21 kJ/mol was
obtained for the catalyst with the best performance. Statistic test
showed that this new intrinsic kinetics equation was acceptable.
Abstract: Micro electromechanical sensors (MEMS) play a vital
role along with global positioning devices in navigation of
autonomous vehicles .These sensors are low cost ,easily available but
depict colored noises and unpredictable discontinuities .Conventional
filters like Kalman filters and Sigma point filters are not able to cope
with nonwhite noises. This research has utilized H∞ filter in nonlinear
frame work both with Kalman filter and Unscented filter for
navigation and self alignment of an airborne vehicle. The system is
simulated for colored noises and discontinuities and results are
compared with not robust nonlinear filters. The results are found
40%-70% more robust against colored noises and discontinuities.
Abstract: Quantitative trait loci (QTL) experiments have yielded
important biological and biochemical information necessary for
understanding the relationship between genetic markers and
quantitative traits. For many years, most QTL algorithms only
allowed one observation per genotype. Recently, there has been an
increasing demand for QTL algorithms that can accommodate more
than one observation per genotypic distribution. The Bayesian
hierarchical model is very flexible and can easily incorporate this
information into the model. Herein a methodology is presented that
uses a Bayesian hierarchical model to capture the complexity of the
data. Furthermore, the Markov chain Monte Carlo model composition
(MC3) algorithm is used to search and identify important markers. An
extensive simulation study illustrates that the method captures the
true QTL, even under nonnormal noise and up to 6 QTL.
Abstract: By the application of an improved back-propagation
neural network (BPNN), a model of current densities for a solid oxide
fuel cell (SOFC) with 10 layers is established in this study. To build
the learning data of BPNN, Taguchi orthogonal array is applied to
arrange the conditions of operating parameters, which totally 7 factors
act as the inputs of BPNN. Also, the average current densities
achieved by numerical method acts as the outputs of BPNN.
Comparing with the direct solution, the learning errors for all learning
data are smaller than 0.117%, and the predicting errors for 27
forecasting cases are less than 0.231%. The results show that the
presented model effectively builds a mathematical algorithm to predict
performance of a SOFC stack immediately in real time.
Also, the calculating algorithms are applied to proceed with the
optimization of the average current density for a SOFC stack. The
operating performance window of a SOFC stack is found to be
between 41137.11 and 53907.89. Furthermore, an inverse predicting
model of operating parameters of a SOFC stack is developed here by
the calculating algorithms of the improved BPNN, which is proved to
effectively predict operating parameters to achieve a desired
performance output of a SOFC stack.
Abstract: A green design for assembly model is presented to
integrate design evaluation and assembly and disassembly sequence
planning by evaluating the three activities in one integrated model. For
an assembled product, an assembly sequence planning model is
required for assembling the product at the start of the product life cycle.
A disassembly sequence planning model is needed for disassembling
the product at the end. In a green product life cycle, it is important to
plan how a product can be disassembled, reused, or recycled, before
the product is actually assembled and produced. Given a product
requirement, there may be several design alternative cases to design
the same product. In the different design cases, the assembly and
disassembly sequences for producing the product can be different. In
this research, a new model is presented to concurrently evaluate the
design and plan the assembly and disassembly sequences. First, the
components are represented by using graph based models. Next, a
particle swarm optimization (PSO) method with a new encoding
scheme is developed. In the new PSO encoding scheme, a particle is
represented by a position matrix defining an assembly sequence and a
disassembly sequence. The assembly and disassembly sequences can
be simultaneously planned with an objective of minimizing the total of
assembly costs and disassembly costs. The test results show that the
presented method is feasible and efficient for solving the integrated
design evaluation and assembly and disassembly sequence planning
problem. An example product is implemented and illustrated in this
paper.
Abstract: This study uses natural water and the surface properties of powdered activated carbon to acclimatize organics, forming biofilms on the surface of powdered activated carbon. To investigate the influence of different hydraulic retention times on the removal efficacy of trace organics in raw water, and to determine the optimal hydraulic retention time of a biological powdered activated carbon system, this study selects ozone-treated water processed by Feng-shan Advanced Water Purification Plant in southern Taiwan for the experiment. The evaluation indicators include assimilable organic carbon, dissolved organic carbon, and total organic carbon. The results of this study can improve the quality of drinking water treated using advanced water purification procedures.
Abstract: This study explores perceptions of English as a Foreign
Language (EFL) learners on using computer mediated communication
technology in their learner of English. The data consists of
observations of both synchronous and asynchronous communication
participants engaged in for over a period of 4 months, which included
online, and offline communication protocols, open-ended interviews
and reflection papers composed by participants.
Content analysis of interview data and the written documents listed
above, as well as, member check and triangulation techniques are the
major data analysis strategies. The findings suggest that participants
generally do not benefit from computer-mediated communication in
terms of its effect in learning a foreign language. Participants regarded
the nature of CMC as artificial, or pseudo communication that did not
aid their authentic communicational skills in English. The results of
this study sheds lights on insufficient and inconclusive findings, which
most quantitative CMC studies previously generated.
Abstract: ZnO nanostructures including nanowires, nanorods,
and nanoneedles were successfully deposited on GaAs substrates,
respectively, by simple two-step chemical method for the first time. A
ZnO seed layer was firstly pre-coated on the O2-plasma treated
substrate by sol-gel process, followed by the nucleation of ZnO
nanostructures through hydrothermal synthesis. Nanostructures with
different average diameter (15-250 nm), length (0.9-1.8 μm), density
(0.9-16×109 cm-2) were obtained via adjusting the growth time and
concentration of precursors. From the reflectivity spectra, we
concluded ordered and taper nanostructures were preferential for
photovoltaic applications. ZnO nanoneedles with an average diameter
of 106 nm, a moderate length of 2.4 μm, and the density of 7.2×109
cm-2 could be synthesized in the concentration of 0.04 M for 18 h.
Integrated with the nanoneedle array, the power conversion efficiency
of single junction solar cell was increased from 7.3 to 12.2%,
corresponding to a 67% improvement.
Abstract: In the past decade, artificial neural networks (ANNs)
have been regarded as an instrument for problem-solving and
decision-making; indeed, they have already done with a substantial
efficiency and effectiveness improvement in industries and businesses.
In this paper, the Back-Propagation neural Networks (BPNs) will be
modulated to demonstrate the performance of the collaborative
forecasting (CF) function of a Collaborative Planning, Forecasting and
Replenishment (CPFR®) system. CPFR functions the balance between
the sufficient product supply and the necessary customer demand in a
Supply and Demand Chain (SDC). Several classical standard BPN will
be grouped, collaborated and exploited for the easy implementation of
the proposed modular ANN framework based on the topology of a
SDC. Each individual BPN is applied as a modular tool to perform the
task of forecasting SKUs (Stock-Keeping Units) levels that are
managed and supervised at a POS (point of sale), a wholesaler, and a
manufacturer in an SDC. The proposed modular BPN-based CF
system will be exemplified and experimentally verified using lots of
datasets of the simulated SDC. The experimental results showed that a
complex CF problem can be divided into a group of simpler
sub-problems based on the single independent trading partners
distributed over SDC, and its SKU forecasting accuracy was satisfied
when the system forecasted values compared to the original simulated
SDC data. The primary task of implementing an autonomous CF
involves the study of supervised ANN learning methodology which
aims at making “knowledgeable" decision for the best SKU sales plan
and stocks management.
Abstract: The Ni/α-Al2O3 catalysts with different amounts of La
as promoter from 0 to 4 wt % were prepared, characterized and their
catalytic activity was investigated in syngas methanation reaction.
Effects of reaction temperature and lanthanum loading on carbon
oxides conversion and methane selectivity were also studied. Adding
certain amount of lanthanum to 10Ni /α-Al2O3 catalysts can decrease
the average NiO crystallite diameter which leads to higher activity and
stability while excessive addition would cause deactivation quickly.
Stability on stream towards deactivation was observed up to 800 min
at 500 °C, 0.1MPa and 600000 mL·g-1·h-1.
Abstract: Speckle phenomena results from when coherent
radiation is reflected from a rough surface. Characterizing the speckle
strongly depends on the measurement condition and experimental
setup. In this paper we report the experimental results produced with
different parameters in the setup. We investigated the factors which
affects the speckle contrast, such as, F-number, gamma value and
exposure time of the camera, rather than geometric factors like the
distance between the projector lens to the screen, the viewing distance,
etc. The measurement results show that the speckle contrast decreases
by decreasing F-number, by increasing gamma value, and slightly
affects by exposure time of the camera and the gain value of the
camera.
Abstract: Transcription factor p53 has a powerful tumor
suppressing function that is associated with many cancers. However,
p53 of the molecular weight was higher make the limitation across to
skin or cell membrane. Thymidine dinucleotide (pTT), an
oligonucleotide, can activate the p53 transcription factor. pTT is a
hydrophilic and negative charge oligonucleotide, which delivery in to
cell membrane need an appropriate carrier. The aim of this study was
to improve the bioavailability of the nucleotide fragment, thymidine
dinucleotide (pTT), using elasic liposome carriers to deliver the drug
into the skin. The study demonstrate that dioleoylphosphocholine
(DOPC) incorporated with sodium cholate at molar ratio 1:1 can
archived the particle size about 220 nm. This elastic liposome could
penetration through skin from stratum corneum to whole epidermis by
confocal laser scanning microscopy (CLSM). Moreover, we observed
the the slight increase in generation of p53 by western blot.
Abstract: This study investigates the electrical performance of a
planar solid oxide fuel cell unit with cross-flow configuration when the fuel utilization gets higher and the fuel inlet flow are non-uniform.
A software package in this study solves two-dimensional,
simultaneous, partial differential equations of mass, energy, and
electro-chemistry, without considering stack direction variation. The
results show that the fuel utilization increases with a decrease in the molar flow rate, and the average current density decreases when the
molar flow rate drops. In addition, non-uniform Pattern A will induce more severe happening of non-reaction area in the corner of the fuel
exit and the air inlet. This non-reaction area deteriorates the average
current density and then deteriorates the electrical performance to –7%.
Abstract: Topical photodynamic therapy (PDT) with
5-aminolevulinic acid (ALA) is an alternative therapy for treating
superficial cancer, especially for skin or oral cancer. ALA, a precursor
of the photosensitizer protoporphyrin IX (PpIX), is present as
zwitterions and hydrophilic property which make the low permeability
through the cell membrane. Collagen is a traditional carrier; its
molecular composed various amino acids which bear positive charge
and negative charge. In order to utilize the ion-pairs with ALA and
collagen, the study employed various pH values adjusting the net
charge. The aim of this study was to compare a series collagen form,
including solution, gel and sponge to investigate the topical delivery
behavior of ALA. The in vivo confocal laser scanning microscopy
(CLSM) study demonstrated that PpIX generation ability was different
pattern after apply for 6 h. Gel type could generate high PpIX, and
archived more deep of skin depth.
Abstract: This article experimentally investigates the
thermal performance of thermoelectric air-cooling module
which comprises a thermoelectric cooler (TEC) and an
air-cooling heat sink. The influences of input current and heat
load are determined. And performances under each situation
are quantified by thermal resistance analysis. Since TEC
generates Joule heat, this nature makes construction of thermal
resistance network difficult. To simplify the analysis, this
article emphasizes on the resistance heat load might meet when
passing through the device. Therefore, the thermal resistances
in this paper are to divide temperature differences by heat load.
According to the result, there exists an optimum input current
under every heating power. In this case, the optimum input
current is around 6A or 7A. The performance of the heat sink
would be improved with TEC under certain heating power and
input current, especially at a low heat load. According to the
result, the device can even make the heat source cooler than the
ambient. However, TEC is not always effective at every heat
load and input current. In some situation, the device works
worse than the heat sink without TEC. To determine the
availability of TEC, this study figures out the effective
operating region in which the TEC air-cooling module works
better than the heat sink without TEC. The result shows that
TEC is more effective at a lower heat load. If heat load is too
high, heat sink with TEC will perform worse than without TEC.
The limit of this device is 57W. Besides, TEC is not helpful if
input current is too high or too low. There is an effective range
of input current, and the range becomes narrower when the heat
load grows.
Abstract: purpose of this study was to investigate the current status of support services for students with special education needs (SEN) at colleges and universities in Taiwan. Seventy-two college and universities received a questionnaire on its resource room operation process and four resource room staffs each from different areas were interviewed through semi- structured interview forms. The main findings were (1) most colleges and universities did offer sufficient administrative resources; (2) more efforts on preventions for SEN students and establishment of disability awareness should be made for all campus faculties ; (3) more comprehensive services were required to help students to have better transition into post-school life; (4) most schools provided basic administrative resource requirements but qualities of the resource room programs needed to be enhanced; and (5) most resource room staffs lacked of professional knowledge in counseling the SEN students which needed to be strengthened in the future.